| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
AFAICS the last uses of directly 'making' kernel PGDs was removed 7 years ago:
8b78c21d72d9: ("x86, 64bit, mm: hibernate use generic mapping_init")
Where the explicit PGD walking loop was replaced with kernel_ident_mapping_init()
calls. This was then (unnecessarily) carried over through the 5-level paging conversion.
Also clean up the 'level' comments a bit, to convey the original, meanwhile somewhat
bit-rotten notion, that these are empty comment blocks with no methods to handle any
of the levels except the PTE level.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724114418.629021-4-mingo@kernel.org
|
|
Last use of them was removed 13 years ago, when the code was converted
to use CYC2NS_SCALE_FACTOR:
53d517cdbaac: ("x86: scale cyc_2_nsec according to CPU frequency")
The current TSC code uses the 'struct cyc2ns_data' scaling abstraction,
the old fixed scaling approach is long gone.
This cleanup also removes the 'arbitralrily' typo from the comment,
so win-win. ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724114418.629021-3-mingo@kernel.org
|
|
Last use was removed more than 5 years ago, in:
5ad274d41c1b: ("x86/irq: Remove unused old IOAPIC irqdomain interfaces")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724114418.629021-2-mingo@kernel.org
|
|
Remove the temporary defines and fixup all references.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.855839271@linutronix.de
|
|
Replace the x86 code with the generic variant. Use temporary defines for
idtentry_* which will be cleaned up in the next step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.711492752@linutronix.de
|
|
Cleanup the temporary defines and use irqentry_ instead of idtentry_.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.602603691@linutronix.de
|
|
Replace the x86 variant with the generic version. Provide the relevant
architecture specific helper functions and defines.
Use a temporary define for idtentry_exit_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.494648601@linutronix.de
|
|
Replace the syscall entry work handling with the generic version. Provide
the necessary helper inlines to handle the real architecture specific
parts, e.g. ptrace.
Use a temporary define for idtentry_enter_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.376213694@linutronix.de
|
|
As a preparatory step for moving the syscall and interrupt entry/exit
handling into generic code, provide a pt_regs helper which retrieves the
interrupt state from pt_regs. This is required to check whether interrupts
are reenabled by return from interrupt/exception.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.258511584@linutronix.de
|
|
Pick up generic entry code to migrate x86 over.
|
|
<linux/instrumentation.h> header
Linus pointed out that compiler.h - which is a key header that gets included in every
single one of the 28,000+ kernel files during a kernel build - was bloated in:
655389666643: ("vmlinux.lds.h: Create section for protection against instrumentation")
Linus noted:
> I have pulled this, but do we really want to add this to a header file
> that is _so_ core that it gets included for basically every single
> file built?
>
> I don't even see those instrumentation_begin/end() things used
> anywhere right now.
>
> It seems excessive. That 53 lines is maybe not a lot, but it pushed
> that header file to over 12kB, and while it's mostly comments, it's
> extra IO and parsing basically for _every_ single file compiled in the
> kernel.
>
> For what appears to be absolutely zero upside right now, and I really
> don't see why this should be in such a core header file!
Move these primitives into a new header: <linux/instrumentation.h>, and include that
header in the headers that make use of it.
Unfortunately one of these headers is asm-generic/bug.h, which does get included
in a lot of places, similarly to compiler.h. So the de-bloating effect isn't as
good as we'd like it to be - but at least the interfaces are defined separately.
No change to functionality intended.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200604071921.GA1361070@gmail.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
The macro is not used anywhere, and has an incorrect value (going by the
comment) on x86_64 since commit c898faf91b3e ("x86: 46 bit physical address
support on 64 bits")
To avoid confusion, just remove the definition.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200723231544.17274-2-nivedita@alum.mit.edu
|
|
Clang fails to compile __get_user_size() on 32-bit for the following code:
long long val;
__get_user(val, usrptr);
with: error: invalid output size for constraint '=q'
GCC compiles the same code without complaints.
The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.
GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.
Neither Clang nor GCC like this very much with -m32:
long long ret;
asm ("movb $5, %0" : "=q" (ret));
However, GCC can tolerate this variant:
long long ret;
switch (sizeof(ret)) {
case 1:
asm ("movb $5, %0" : "=q" (ret));
break;
case 8:;
}
Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.
If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.
While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.
It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.
Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.
The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.
[ tglx: Amended changelog ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/20180209161833.4605-1-dwmw2@infradead.org/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20200720204925.3654302-12-ndesaulniers@google.com
|
|
Also remove now unused __percpu_mov_op.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-11-ndesaulniers@google.com
|
|
Use __pcpu_size_call_return() to simplify this_cpu_read_stable().
Also remove __bad_percpu_size() which is now unused.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-10-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-9-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-8-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-7-ndesaulniers@google.com
|
|
The "e" constraint represents a constant, but the XADD instruction doesn't
accept immediate operands.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-6-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-5-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-4-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-3-ndesaulniers@google.com
|
|
In preparation for cleaning up the percpu operations, define macros for
abstraction based on the width of the operation.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-2-ndesaulniers@google.com
|
|
Resolves conflict with the tip tree.
Fixes: d7866e503bdc ("crypto: x86 - Remove include/asm/inst.h")
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>,
CC: "Chang S. Bae" <chang.seok.bae@intel.com>,
CC: Peter Zijlstra <peterz@infradead.org>,
CC: Sasha Levin <sashal@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to __show_regs().
Keep the used log level intact to separate visible change.
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/
[2]: https://lore.kernel.org/linux-doc/20190724170249.9644-1-dima@arista.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200629144847.492794-3-dima@arista.com
|
|
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to show_iret_regs() as a preparation to add it
to __show_regs() and show_regs_if_on_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/
[2]: https://lore.kernel.org/linux-doc/20190724170249.9644-1-dima@arista.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200629144847.492794-2-dima@arista.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
|
|
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
|
|
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
With UV1 support removed, EFI_UV1_MEMMAP is no longer used.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212956.019149227@hpe.com
|
|
Remove UV1 reference as UV1 is not longer supported by HPE.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.435951508@hpe.com
|
|
UV1 is not longer supported by HPE
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.320087418@hpe.com
|
|
UV1 is not longer supported by HPE.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.203480177@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.083309377@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212954.964332370@hpe.com
|
|
When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled,
we observe the following error:
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0
^
./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment;
^
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_STIMER0_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0
^
./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0;
This is caused by typos in arch/x86/include/asm/idtentry.h:
HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR
HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR
For more details see ClangBuiltLinux issue #1088.
Fixes: a16be368dd3f ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1088
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lore.kernel.org/patchwork/patch/1272115/
Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com
|
|
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Jian Cai <caij2003@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> #
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com
|
|
Current minimum required version of binutils is 2.23,
which supports PSHUFB, PCLMULQDQ, PEXTRD, AESKEYGENASSIST,
AESIMC, AESENC, AESENCLAST, AESDEC, AESDECLAST and MOVQ
instruction mnemonics.
Substitute macros from include/asm/inst.h with a proper
instruction mnemonics in various assmbly files from
x86/crypto directory, and remove now unneeded file.
The patch was tested by calculating and comparing sha256sum
hashes of stripped object files before and after the patch,
to be sure that executable code didn't change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Stack switching for interrupt handlers happens in C now for both 64 and
32bit. Remove the stale comment which claims the contrary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This patch adds a new capability KVM_CAP_SMALLER_MAXPHYADDR which
allows userspace to query if the underlying architecture would
support GUEST_MAXPHYADDR < HOST_MAXPHYADDR and hence act accordingly
(e.g. qemu can decide if it should warn for -cpu ..,phys-bits=X)
The complications in this patch are due to unexpected (but documented)
behaviour we see with NPF vmexit handling in AMD processor. If
SVM is modified to add guest physical address checks in the NPF
and guest #PF paths, we see the followning error multiple times in
the 'access' test in kvm-unit-tests:
test pte.p pte.36 pde.p: FAIL: pte 2000021 expected 2000001
Dump mapping: address: 0x123400000000
------L4: 24c3027
------L3: 24c4027
------L2: 24c5021
------L1: 1002000021
This is because the PTE's accessed bit is set by the CPU hardware before
the NPF vmexit. This is handled completely by hardware and cannot be fixed
in software.
Therefore, availability of the new capability depends on a boolean variable
allow_smaller_maxphyaddr which is set individually by VMX and SVM init
routines. On VMX it's always set to true, on SVM it's only set to true
when NPT is not enabled.
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Babu Moger <babu.moger@amd.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200710154811.418214-10-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We would like to introduce a callback to update the #PF intercept
when CPUID changes. Just reuse update_bp_intercept since VMX is
already using update_exception_bitmap instead of a bespoke function.
While at it, remove an unnecessary assignment in the SVM version,
which is already done in the caller (kvm_arch_vcpu_ioctl_set_guest_debug)
and has nothing to do with the exception bitmap.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Also no point of it being inline since it's always called through
function pointers. So remove that.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-3-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull vkm fixes from Paolo Bonzini:
"Two simple but important bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MIPS: Fix build errors for 32bit kernel
KVM: nVMX: fixes for preemption timer migration
|
|
Commit 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Cc: Makarand Sonare <makarandsonare@google.com>
Fixes: 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration")
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While the nmi_enter() users did
trace_hardirqs_{off_prepare,on_finish}() there was no matching
lockdep_hardirqs_*() calls to complete the picture.
Introduce idtentry_{enter,exit}_nmi() to enable proper IRQ state
tracking across the NMIs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200623083721.216740948@infradead.org
|
|
|
|
Move x86's 'struct kvm_mmu_memory_cache' to common code in anticipation
of moving the entire x86 implementation code to common KVM and reusing
it for arm64 and MIPS. Add a new architecture specific asm/kvm_types.h
to control the existence and parameters of the struct. The new header
is needed to avoid a chicken-and-egg problem with asm/kvm_host.h as all
architectures define instances of the struct in their vCPU structs.
Add an asm-generic version of kvm_types.h to avoid having empty files on
PPC and s390 in the long term, and for arm64 and mips in the short term.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a gfp_zero flag to 'struct kvm_mmu_memory_cache' and use it to
control __GFP_ZERO instead of hardcoding a call to kmem_cache_zalloc().
A future patch needs such a flag for the __get_free_page() path, as
gfn arrays do not need/want the allocator to zero the memory. Convert
the kmem_cache paths to __GFP_ZERO now so as to avoid a weird and
inconsistent API in the future.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
