summaryrefslogtreecommitdiff
path: root/arch/sh/kernel/cpu
AgeCommit message (Collapse)AuthorFilesLines
2017-01-19sh: Don't set the sh-sci platform data REIE bit when not implementedLaurent Pinchart2-4/+0
According to the datasheets, the sh7760 SIM and sh7723 SCIFA instances don't implement the REIE bit. Don't set it in platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: Don't set the sh-sci platform data scscr CKE0 bitLaurent Pinchart2-3/+3
The bit is only set by platforms that also set the CKE1 but, in which case its value is ignored by the device. Don't set it, this simplifies platform data and only leaves the CKE1 bit to be handled. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: Don't set sh-sci port_regLaurent Pinchart5-16/+0
The driver considers all negative or zero values of the port_reg field as invalid. The four platforms that set the field to a register address all use an address higher than 0x7fffffff, which is thus considered by the driver as invalid. The feature is thus never used, remove it. The feature could be implemented properly in the future using the pinctrl and GPIO APIs if desired. While at it, don't set the field to SCIx_NOT_SUPPORTED (-1) either, leaving it unset leads to the same result. This will allow removing the SCIx_NOT_SUPPORTED macro. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: Don't set the sh-sci pdata UPF_BOOT_AUTOCONF flagsLaurent Pinchart28-112/+1
The flag is set by the driver internally, don't set it in platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: sh726[49]: Don't set sh-sci pdata scscr TOIE bitLaurent Pinchart2-16/+16
The SCIF ports on sh7264 and sh7269 don't support the TOIE bit according to the datasheets. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: Don't set sh-sci pdata scscr TIE and RIE bitsLaurent Pinchart4-22/+21
The scscr platform data field is used by the driver in three locations. One of them masks out all bits except SCSCR_REIE. The two other are the set_termios handler and the console write handler. The set_termios handler calls sci_start_rx() to enable the receiver, which sets the RIE bit unconditionally. It then calls sci_port_disable() that effectively disables both the transmitter and the receiver. The TIE bit will thus get set later when the serial cores reenables the serial port. The console write handler runs with interrupts disabled, and saves and restores the SCSCR register value. The RIE and TIE bits are thus not needed there. The bits are thus not necessary in platform data, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sh: Don't set sh-sci pdata scscr TE and RE bitsLaurent Pinchart28-135/+103
The bits are set by the driver internally, don't set them in platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds3-3/+3
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14treewide: Fix printk() message errorsMasanari Iida2-2/+2
This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-09-19sh/SH-X3 SMP: Convert to hotplug state machineSebastian Andrzej Siewior1-21/+5
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-sh@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160906170457.32393-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-05sh: use common clock framework with device tree boardsRich Felker1-0/+4
Enable common clk framework for DT-based boards and disable code that depends on the legacy sh clk framework when common clk is enabled. Once legacy drivers are converted over, the old code can be removed entirely. Signed-off-by: Rich Felker <dalias@libc.org>
2016-08-05sh: add SMP support for J2Rich Felker2-0/+143
Support is hooked up via a cpu start method specified in the device tree, and also depends on DT nodes that describe the interfaces for performing IPI and identifying which cpu execution is taking place on. The currently used method is a form of spin table, where secondary cpus are unblocked by writing to a special address. Signed-off-by: Rich Felker <dalias@libc.org>
2016-08-05sh: SMP support for SH2 entry.SRich Felker1-0/+50
The SH2 version of entry.S uses global variables, which need to be cpu-local in order to work with SMP. For ease of access from asm, simply use arrays indexed by cpu number, and require the availability of an address (mmio register or properly setup per-cpu memory) from which the current cpu's index can be read. Signed-off-by: Rich Felker <dalias@libc.org>
2016-08-05sh: add AT_HWCAP flag for J-Core cas.l instructionRich Felker1-0/+2
The J-Core cpu has, as an ISA extension, an atomic compare-and-swap instruction cas.l which applications need to use (instead the imask or gusa atomic models, which are fundamentally limited to UP) for synchronization in order to be compatible with SMP systems. Provide a hwcap flag so that it's possible to do runtime selection and support both. Signed-off-by: Rich Felker <dalias@libc.org>
2016-08-05sh: add support for J-Core J2 processorRich Felker4-2/+43
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the changes to add J2 support build on existing SH-2 support. However, J2 does not duplicate the memory-mapped SH-2 features like the cache interface. Instead, the cache interfaces is described in the device tree, and new code is added to be able to access the flat device tree at early boot before it is unflattened. Support is also added for receiving interrupts on trap numbers in the range 16 to 31, since the J-Core aic1 interrupt controller generates these traps. This range was unused but nominally for hardware exceptions on SH-2, and a few values in this range were used for exceptions on SH-2A, but SH-2A has its own version of the relevant code. No individual cpu subtypes are added for J2 since the intent moving forward is to represent SoCs with device tree rather than as hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item exists only to fit into the existing cpu selection mechanism until it is overhauled. Signed-off-by: Rich Felker <dalias@libc.org>
2016-07-31sh: disable aliased page logic on NOMMU modelsRich Felker1-0/+4
SH3/4 (with MMU) have a virtually indexed cache, requiring explicit work to avoid consistency problems arising from having the same physical address range cached in multiple cache lines. This is unneeded for the NOMMU case, and some of the resulting code paths (kmap_coherent) don't work. SH2 only avoided this problem by having a 4-way associative cache with way size equal to the page size (4k), yielding no cache index bits outside of the page offset and thus no aliases. Signed-off-by: Rich Felker <dalias@libc.org>
2016-03-30sh: fix smp-shx3 build regression from removal of arch localtimerRich Felker1-2/+0
The removal was not complete and left behind one reference to a removed function in smp-shx3.c. For completeness, also remove declarations for functions that were removed. Fixes: 45624ac38926 "sh: remove arch-specific localtimer and use generic one" Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rich Felker <dalias@libc.org>
2016-03-17sh: provide unified syscall trap compatible with all SH modelsRich Felker2-8/+8
Historically SH-2 Linux (and originally uClinux) used a syscall calling convention incompatible with the established SH-3/4 Linux ABI. This choice was made because the trap range used by the existing ABI, 0x10-0x17, overlaps with the hardware exception/interrupt trap range reserved by SH-2, and in particular, with the SH-2A divide-by-zero and division-overflow exceptions. Despite the documented syscall convention using the low bits of the trap number to signal the number of arguments the kernel should expect, no version of the kernel has ever used this information, nor is it useful; all of the registers need to be saved anyway. Therefore, it is possible to pick a new trap number, 0x1f, that is both supported by all existing SH-3/4 kernels and unassigned as a hardware trap in the SH-2 range. This makes it possible to produce SH-2 application binaries that are forwards-compatible with running on SH-3/4 kernels and to treat SH as a unified platform with varying ISA support levels rather than multiple gratuitously-incompatible platforms. This patch adjusts the range checking SH-2 and SH-2A kernels make for the syscall trap to accept the range 0x1f-0x2f rather than just 0x20-0x2f. As a result, trap 0x1f now acts as a syscall for all SH models. Signed-off-by: Rich Felker <dalias@libc.org>
2015-12-17sh: sh7734: Correct SCIF type for BRGGeert Uytterhoeven1-6/+6
The SCIF variant in the sh7734 SoC is not the common "SH-4(A)" variant, but a derivative with added "Baud Rate Generator for External Clock" (BRG). Correct the regtype value in platform data to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-17sh: Remove sci_ick clock aliasLaurent Pinchart1-1/+0
The sh-sci driver falls back to the peripheral clock if the sci_ick clock doesn't exist. There's thus no need to create an alias for the peripheral clock named sci_ick. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-17sh: Rename sci_ick and sci_fck clock to fckLaurent Pinchart10-47/+54
The SCI driver requires a functional clock named "fck" and falls back to "sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow removal of the fallback code rename the sci_ick and sci_fck clocks to fck for all SH platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-07arch/sh/kernel/traps_64.c: use sign_extend64() for sign extensionMartin Kepplinger1-1/+1
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: George Spelvin <linux@horizon.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-06Merge tag 'media/v4.3-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25 - new HDMI capture driver: tc358743 - new driver for NetUP DVB new boards (netup_unidvb) - IR support for DVBSky cards (smipcie-ir) - Coda driver has gain macroblock tiling support - Renesas R-Car gains JPEG codec driver - new DVB platform driver for STi boards: c8sectpfe - added documentation for the media core kABI to device-drivers DocBook - lots of driver fixups, cleanups and improvements * tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits) [media] c8sectpfe: Remove select on undefined LIBELF_32 [media] i2c: fix platform_no_drv_owner.cocci warnings [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr() [media] tc358743: only queue subdev notifications if devnode is set [media] tc358743: add missing Kconfig dependency/select [media] c8sectpfe: Use %pad to print 'dma_addr_t' [media] DocBook media: Fix typo "the the" in xml files [media] tc358743: make reset gpio optional [media] tc358743: set direction of reset gpio using devm_gpiod_get [media] dvbdev: document most of the functions/data structs [media] dvb_frontend.h: document the struct dvb_frontend [media] dvb-frontend.h: document struct dtv_frontend_properties [media] dvb-frontend.h: document struct dvb_frontend_ops [media] dvb: Use DVBFE_ALGO_HW where applicable [media] dvb_frontend.h: document struct analog_demod_ops [media] dvb_frontend.h: Document struct dvb_tuner_ops [media] Docbook: Document struct analog_parameters [media] dvb_frontend.h: get rid of dvbfe_modcod [media] add documentation for struct dvb_tuner_info [media] dvb_frontend: document dvb_frontend_tune_settings ...
2015-08-06bus: subsys: update return type of ->remove_dev() to voidViresh Kumar1-2/+1
Its return value is not used by the subsys core and nothing meaningful can be done with it, even if we want to use it. The subsys device is anyway getting removed. Update prototype of ->remove_dev() to make its return type as void. Fix all usage sites as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-06[media] clock-sh7724.c: fix sh-vou clock identifierHans Verkuil1-1/+1
Bitrot has set in for this driver and the sh-vou clock was never enabled, since the clock name in clock-sh7724.c was wrong. It should be sh-vou, not sh-vou.0. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Thanks-to: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-06SH: use clkdev_add_table()Russell King5-10/+9
We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love writing inefficient and unnecessary code. Convert SH to use the correct interface. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-12cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logicDaniel Lezcano1-3/+0
The only place where the time is invalid is when the ACPI_CSTATE_FFH entry method is not set. Otherwise for all the drivers, the time can be correctly measured. Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers for all the states, just invert the logic by replacing it by the flag CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle driver, remove the former flag from all the drivers and invert the logic with this flag in the different governor. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-30sh: fix sh770x SCIF memory regionsAndriy Skulysh1-3/+3
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf975be ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-11Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-68/+68
Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...
2014-08-07sh: SH7724 clock fixesDaniel Palmer1-1/+3
Fix the device name for the CMT. Add clocks called usb0 and usb1 so that r8a66597_hcd works again on the ecovec24 board Signed-off-by: Daniel Palmer <danieruru@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Richard Weinberger <richard@nod.at> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-15sh: dma: Use defines instead of hardcoded numbersGeert Uytterhoeven3-68/+68
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11sh: Switch to new style MTU2 deviceLaurent Pinchart9-433/+72
The MTU2 (Multi-Function Timer Pulse Unit 2) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11sh: Switch to new style TMU deviceLaurent Pinchart30-2486/+239
The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11sh: Switch to new style CMT deviceLaurent Pinchart19-484/+106
The CMT (Compare Match Timer) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-04sh: sh7757: switch RSPI clock to dev ID matchGeert Uytterhoeven1-1/+1
Switch the RSPI MSTP clock on SH7757 from a con ID match to a dev ID match, so we can start looking it up using clk_get() with a NULL ID. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04sh: prefix sh-specific "CCR" and "CCR2" by "SH_"Geert Uytterhoeven1-2/+2
Commit bcf24e1daa94 ("mmc: omap_hsmmc: use the generic config for omap2plus devices"), enabled the build for other platforms for compile testing. sh-allmodconfig now fails with: include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1 This happens because SuperH #defines "CCR", which is one of the enum values in include/linux/omap-dma.h. There's a similar issue with "CCR2" on sh2a. As "CCR" and "CCR2" are too generic names for global #defines, prefix them with "SH_" to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-24sh: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart28-108/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA portsLaurent Pinchart2-6/+6
SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the value specified in the datasheet. This is currently handled by a custom baud rate calculation algorithm. The algorithm ID will be removed from platform data, set the sampling rate directly instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: Declare SCIF register base and IRQ as resourcesLaurent Pinchart28-261/+883
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-13sh: move fpu_counter into ARCH specific thread_structVineet Gupta1-1/+1
Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can be moved out into ARCH specific thread_struct, reducing the size of task_struct for other arches. Compile tested sh defconfig + sh4-linux-gcc (4.6.3) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Paul Mundt <paul.mundt@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+9
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-08-23SH7619: fix typo in Ether platform dataSergei Shtylyov1-1/+1
Commit 06a64f91da72cb5827e2bedef2ead60a123fd66e (SH7619: fix Ether support) has a typo in the 'phy_interface' field name of the platform data which causes build error -- fix it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'Sergei Shtylyov1-1/+0
Now that the 'register_type' field of the 'sh_eth' driver's platform data is not used by the driver anymore, it's time to remove it and its initializers from the SH platform code. Also move *enum* declaring values for this field from <linux/sh_eth.h> to the local driver's header file as they're only needed by the driver itself now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21SH7619: fix Ether supportSergei Shtylyov1-2/+10
The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'. Strangely, both commit d88a3ea6fa4c (SH7619 add ethernet controler support) that added the platform code and commit 71557a37adb5 ([netdrvr] sh_eth: Add SH7619 support) were done in about the same time, yet the latter one added 'struct sh_eth_plat_data' and the platform code didn't ever get updated... Add the proper platform data and fix off-by-one memory resource end error, while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12SH: cpuidle: Add missing parameter for cpuidle_register()Geert Uytterhoeven1-3/+1
arch/sh/kernel/cpu/shmobile/cpuidle.c: In function 'sh_mobile_setup_cpuidle': arch/sh/kernel/cpu/shmobile/cpuidle.c:102:2: error: too few arguments to function 'cpuidle_register' include/linux/cpuidle.h:129:12: note: declared here arch/sh/kernel/cpu/shmobile/cpuidle.c:94:6: warning: unused variable 'ret' [-Wunused-variable] Add the missing parameter, and remove the unused variable. Both introduced by commit b181a3b03f866776211f22390c185c4da1dc45ff ("SH: cpuidle: use init/exit common routine"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-15sh: delete __cpuinit usage from all sh filesPaul Gortmaker7-17/+17
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-08sh_eth: get SH7724 support out of #ifdefSergei Shtylyov1-1/+1
Get the SH7724 code/data in the driver out of #ifdef by adding "r8a7724-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-08sh_eth: get SH77{34|63} support out of #ifdefSergei Shtylyov1-1/+1
Get the SH77{34|63} specific code/data in the driver out of #ifdef by adding "sh7734-gether" and "sh7763-gether" to the platform driver's ID table. Note that we have to split the 'struct sh_eth_cpu_data' instance into two due to #ifdef inside it; note that we can kill the duplicate sh_eth_set_rate_gether(). Change the GEther platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-08sh_eth: get SH7619 support out of #ifdefSergei Shtylyov1-2/+2
Get the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds3-3/+3
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 11:24:59 +0300