| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This will be used with the upcoming entry.S changes to signal
that there's a machine check pending that cannot be handled in
the Machine check handler itself.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assume we have a crashkernel area of 256MB reserved:
root@vm0:~# cat /proc/iomem
00000000-6fffffff : System RAM
0f258000-0fcfffff : Kernel code
0fd00000-101d10e3 : Kernel data
105b3000-1068dfff : Kernel bss
70000000-7fffffff : Crash kernel
This exactly corresponds to memory block 7 (memory block size is 256MB).
Trying to offline that memory block results in:
root@vm0:~# echo "offline" > /sys/devices/system/memory/memory7/state
-bash: echo: write error: Device or resource busy
[ 128.458762] page:000003d081c00000 refcount:1 mapcount:0 mapping:00000000d01cecd4 index:0x0
[ 128.458773] flags: 0x1ffff00000001000(reserved)
[ 128.458781] raw: 1ffff00000001000 000003d081c00008 000003d081c00008 0000000000000000
[ 128.458781] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
[ 128.458783] page dumped because: unmovable page
The craskernel area is marked reserved in the bootmem allocator. This
results in the memmap getting initialized (refcount=1, PG_reserved), but
the pages are never freed to the page allocator.
So these pages look like allocated pages that are unmovable (esp.
PG_reserved), and therefore, memory offlining fails early, when trying to
isolate the page range.
We only have to care about the exchange area, make that clear.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Link: https://lore.kernel.org/r/20200424083904.8587-1-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
commit 657480d9c015 ("s390: support KPROBES_ON_FTRACE")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508140724.11324-1-yuehaibing@huawei.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
initrd_start must not point at the location the initrd is loaded into
the crashkernel memory but at the location it will be after the
crashkernel memory is swapped with the memory at 0.
Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader")
Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Tested-by: Lianbo Jiang <lijiang@redhat.com>
Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
POSIX defines faccessat() as having a fourth "flags" argument, while the
linux syscall doesn't have it. Glibc tries to emulate AT_EACCESS and
AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken.
Add a new faccessat(2) syscall with the added flags argument and implement
both flags.
The value of AT_EACCESS is defined in glibc headers to be the same as
AT_REMOVEDIR. Use this value for the kernel interface as well, together
with the explanatory comment.
Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can
be useful and is trivial to implement.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Because of late module patching, a livepatch module needs to be able to
apply some of its relocations well after it has been loaded. Instead of
playing games with module_{dis,en}able_ro(), use existing text poking
mechanisms to apply relocations after module loading.
So far only x86, s390 and Power have HAVE_LIVEPATCH but only the first
two also have STRICT_MODULE_RWX.
This will allow removal of the last module_disable_ro() usage in
livepatch. The ultimate goal is to completely disallow making
executable mappings writable.
[ jpoimboe: Split up patches. Use mod state to determine whether
memcpy() can be used. Test and add fixes. ]
Cc: linux-s390@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> # s390
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Conflicts were all overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate sysfs and structs with reipl entries for nvme ipl type.
This allows specifying a target nvme device when rebooting/reipling.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Recognize IPL Block's Ipl Type of "nvme". Populate related structs and sysfs
entries.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
s390 uses the UTS_MACHINE defined arch/s390/Makefile as follows:
UTS_MACHINE := s390x
We do not need to pass the fixed string from the command line.
Hard-code user_regset_view::name, like many other architectures do.
Link: https://lkml.kernel.org/r/20200413013113.8529-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST
set but CONFIG_KVM unset.
This patch fixes the issue by making the needed variable always available.
Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com
Fixes: a0f60f843199 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Philipp Rudo <prudo@linux.ibm.com>
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth
Vijayan common io code.
- Extend cpuinfo to include topology information.
- Add new extended counters for IBM z15 and sampling buffer allocation
rework in perf code.
- Add control over zeroing out memory during system restart.
- CCA protected key block version 2 support and other
fixes/improvements in crypto code.
- Convert to new fallthrough; annotations.
- Replace zero-length arrays with flexible-arrays.
- QDIO debugfs and other small improvements.
- Drop 2-level paging support optimization for compat tasks. Varios mm
cleanups.
- Remove broken and unused hibernate / power management support.
- Remove fake numa support which does not bring any benefits.
- Exclude offline CPUs from CPU topology masks to be more consistent
with other architectures.
- Prevent last branching instruction address leaking to userspace.
- Other small various fixes and improvements all over the code.
* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
s390/mm: cleanup init_new_context() callback
s390/mm: cleanup virtual memory constants usage
s390/mm: remove page table downgrade support
s390/qdio: set qdio_irq->cdev at allocation time
s390/qdio: remove unused function declarations
s390/ccwgroup: remove pm support
s390/ap: remove power management code from ap bus and drivers
s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
s390/mm: cleanup arch_get_unmapped_area() and friends
s390/ism: remove pm support
s390/cio: use fallthrough;
s390/vfio: use fallthrough;
s390/zcrypt: use fallthrough;
s390: use fallthrough;
s390/cpum_sf: Fix wrong page count in error message
s390/diag: fix display of diagnose call statistics
s390/ap: Remove ap device suspend and resume callbacks
s390/pci: Improve handling of unset UID
s390/pci: Fix zpci_alloc_domain() over allocation
s390/qdio: pass ISC as parameter to chsc_sadc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
|
|
Convert the various uses of fallthrough comments to fallthrough;
Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:
cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
mode is full
The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.
Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:
cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
mode is full
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Show the full diag statistic table and not just parts of it.
The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hibernation is known to be broken for many years on s390. Given that
there aren't any real use cases, remove the code instead of spending
time to fix and maintain it.
Without hibernate support it doesn't make too much sense to keep power
management support; therefore remove it completely.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In the past there were no per-CPU information in /proc/cpuinfo
other than CPU frequency. Hence, for machines without CPU MHz
feature there were nothing to show. Now CPU topology and IDs
still could be shown, so do not skip this information from the
output.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: moved comparison]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
/proc/cpuinfo should not print information about CPU 0 when it is offline.
Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Show number of online CPUs within a package (which is
the socket in case of s390). For what it worth, present
that value as "siblings" field - just like x86 does.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Show number of cores that run at least one SMT thread
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Re-IPL for both CCW and FCP is currently done by using diag 308 with the
"Load Clear" subcode, which means that all memory will be cleared.
This can increase re-IPL duration considerably on very large machines.
For CCW devices, there is also a "Load Normal" subcode that was only used
for dump kernels so far. For FCP devices, a similar "Load Normal" subcode
was introduced with z14. The "Load Normal" diag 308 subcode allows to
re-IPL without clearing memory.
This patch adds a new "clear" sysfs attribute to /sys/firmware/reipl for
both the ccw and fcp subdirectories, which can be set to either "0" or "1"
to disable or enable re-IPL with memory clearing. The default value is "0",
which disables memory clearing.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The CPU topology masks on s390 contain also bits of CPUs which
are offline. Currently this is already a problem, since common
code scheduler expects e.g. cpu_smt_mask() to reflect reality.
This update changes the described behaviour and s390 starts to
behave like all other architectures.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Variable cpus_with_topology is a leftover that became
unneeded once the fake NUMA support has been removed.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Show CPU physical address as reported by STAP instruction
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Philipp Rudo <prudo@linux.ibm.com> (s390)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This update adjusts /proc/cpuinfo format to meet some user level
programs expectations. It also makes the layout consistent with
x86 where CPU topology is presented as blocks of key-value pairs.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add CPU measurement counter facility event description for IBM z15.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
That information, e.g. the maximum number of guests or installed
Ultravisor facilities, is interesting for QEMU, Libvirt and
administrators.
Let's provide an easily parsable API to get that information.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Add exceptions handlers performing transparent transition of non-secure
pages to secure (import) upon guest access and secure pages to
non-secure (export) upon hypervisor access.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
[frankja@linux.ibm.com: adding checks for failures]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
[imbrenda@linux.ibm.com: adding a check for gmap fault]
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This provides the basic ultravisor calls and page table handling to cope
with secure guests:
- provide arch_make_page_accessible
- make pages accessible after unmapping of secure guests
- provide the ultravisor commands convert to/from secure
- provide the ultravisor commands pin/unpin shared
- provide callbacks to make pages secure (inacccessible)
- we check for the expected pin count to only make pages secure if the
host is not accessing them
- we fence hugetlbfs for secure pages
- add missing radix-tree include into gmap.h
The basic idea is that a page can have 3 states: secure, normal or
shared. The hypervisor can call into a firmware function called
ultravisor that allows to change the state of a page: convert from/to
secure. The convert from secure will encrypt the page and make it
available to the host and host I/O. The convert to secure will remove
the host capability to access this page.
The design is that on convert to secure we will wait until writeback and
page refs are indicating no host usage. At the same time the convert
from secure (export to host) will be called in common code when the
refcount or the writeback bit is already set. This avoids races between
convert from and to secure.
Then there is also the concept of shared pages. Those are kind of secure
where the host can still access those pages. We need to be notified when
the guest "unshares" such a page, basically doing a convert to secure by
then. There is a call "pin shared page" that we use instead of convert
from secure when possible.
We do use PG_arch_1 as an optimization to minimize the convert from
secure/pin shared.
Several comments have been added in the code to explain the logic in
the relevant places.
Co-developed-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Before being able to host protected virtual machines, donate some of
the memory to the ultravisor. Besides that the ultravisor might impose
addressing limitations for memory used to back protected VM storage. Treat
that limit as protected virtualization host's virtual memory limit.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Add "prot_virt" command line option which controls if the kernel
protected VMs support is enabled at early boot time. This has to be
done early, because it needs large amounts of memory and will disable
some features like STP time sync for the lpar.
Extend ultravisor info definitions and expose it via uv_info struct
filled in during startup.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
It turned out that fake numa support is rather useless on s390, since
there are no scenarios where there is any performance or other benefit
when used.
However it does provide maintenance cost and breaks from time to time.
Therefore remove it.
CONFIG_NUMA is still supported with a very small backend and only one
node. This way userspace applications which require NUMA interfaces
continue to work.
Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node),
since there is quite a bit of kernel code which assumes that more than
one node is possible if CONFIG_NUMA is enabled.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Adjust sampling buffer allocation depending on
frequency and correct comments. Investigation on the
interrupt handler revealed that almost always one interupt
services one SDB, even when running with the maximum frequency
of 100000. Very rarely there have been 2 SBD serviced per
interrupt.
Therefore reduce the number of SBD per CPU. Each SDB is one
page in size. The new formula results in
freq:4000 n_sdb:32 new:16
freq:10000 n_sdb:80 new:16
freq:20000 n_sdb:159 new:17
freq:40000 n_sdb:318 new:19
freq:50000 n_sdb:397 new:20
freq:62500 n_sdb:497 new:22
freq:83333 n_sdb:662 new:24
freq:100000 n_sdb:794 new:25
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
|
|
Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On the s390 platform memblock.physmem array is being built by directly
calling into memblock_add_range() which is a low level function not
intended to be used outside of memblock. Hence lets conditionally add
helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is
enabled. Also use MAX_NUMNODES instead of 0 as node ID similar to
memblock_add() and memblock_reserve(). Make memblock_add_range() a
static function as it is no longer getting used outside of memblock.
Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of using our own kprobes-on-ftrace handling convert the
code to support KPROBES_ON_FTRACE.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread management updates from Christian Brauner:
"Sargun Dhillon over the last cycle has worked on the pidfd_getfd()
syscall.
This syscall allows for the retrieval of file descriptors of a process
based on its pidfd. A task needs to have ptrace_may_access()
permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and
Andy) on the target.
One of the main use-cases is in combination with seccomp's user
notification feature. As a reminder, seccomp's user notification
feature was made available in v5.0. It allows a task to retrieve a
file descriptor for its seccomp filter. The file descriptor is usually
handed of to a more privileged supervising process. The supervisor can
then listen for syscall events caught by the seccomp filter of the
supervisee and perform actions in lieu of the supervisee, usually
emulating syscalls. pidfd_getfd() is needed to expand its uses.
There are currently two major users that wait on pidfd_getfd() and one
future user:
- Netflix, Sargun said, is working on a service mesh where users
should be able to connect to a dns-based VIP. When a user connects
to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be
redirected to an envoy process. This service mesh uses seccomp user
notifications and pidfd to intercept all connect calls and instead
of connecting them to 1.2.3.4:80 connects them to e.g.
127.0.0.1:8080.
- LXD uses the seccomp notifier heavily to intercept and emulate
mknod() and mount() syscalls for unprivileged containers/processes.
With pidfd_getfd() more uses-cases e.g. bridging socket connections
will be possible.
- The patchset has also seen some interest from the browser corner.
Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a
broker process. In the future glibc will start blocking all signals
during dlopen() rendering this type of sandbox impossible. Hence,
in the future Firefox will switch to a seccomp-user-nofication
based sandbox which also makes use of file descriptor retrieval.
The thread for this can be found at
https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html
With pidfd_getfd() it is e.g. possible to bridge socket connections
for the supervisee (binding to a privileged port) and taking actions
on file descriptors on behalf of the supervisee in general.
Sargun's first version was using an ioctl on pidfds but various people
pushed for it to be a proper syscall which he duely implemented as
well over various review cycles. Selftests are of course included.
I've also added instructions how to deal with merge conflicts below.
There's also a small fix coming from the kernel mentee project to
correctly annotate struct sighand_struct with __rcu to fix various
sparse warnings. We've received a few more such fixes and even though
they are mostly trivial I've decided to postpone them until after -rc1
since they came in rather late and I don't want to risk introducing
build warnings.
Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is
needed to avoid allocation recursions triggerable by storage drivers
that have userspace parts that run in the IO path (e.g. dm-multipath,
iscsi, etc). These allocation recursions deadlock the device.
The new prctl() allows such privileged userspace components to avoid
allocation recursions by setting the PF_MEMALLOC_NOIO and
PF_LESS_THROTTLE flags. The patch carries the necessary acks from the
relevant maintainers and is routed here as part of prctl()
thread-management."
* tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim
sched.h: Annotate sighand_struct with __rcu
test: Add test for pidfd getfd
arch: wire up pidfd_getfd syscall
pid: Implement pidfd_getfd syscall
vfs, fdtable: Add fget_task helper
|
