summaryrefslogtreecommitdiff
path: root/arch/s390/kernel/entry.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-10-10s390/kprobes: move insn_page to text segmentHeiko Carstens1-0/+2
Move the in-kernel kprobes insn page to text segment. Rationale: having that page in rw data segment is suboptimal, since as soon as a kprobe is set, this will split the 1:1 kernel mapping for a single page which get new permissions. Note: there is always at least one kprobe present for the kretprobe trampoline; so the mapping will always be split into smaller 4k mappings because of this. Moving the kprobes insn page into text segment makes sure that the page is mapped RO/X in any case, and avoids that the 1:1 mapping is split. The kprobe insn_page is defined as a dummy function which is filled with "br %r14" instructions. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-02s390: remove orphaned extern variables declarationsVasily Gorbik1-1/+0
arch/s390/kernel/entry.h: suspend_zero_pages - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") arch/s390/include/asm/setup.h: vmhalt_cmd - only declaration left after commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface") arch/s390/include/asm/setup.h: vmpoff_cmd - only declaration left after commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390: remove orphaned function declarationsVasily Gorbik1-3/+0
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390: add 3f program exception handlerJanosch Frank1-0/+1
Program exception 3f (secure storage violation) can only be detected when the CPU is running in SIE with a format 4 state description, e.g. running a protected guest. Because of this and because user space partly controls the guest memory mapping and can trigger this exception, we want to send a SIGSEGV to the process running the guest and not panic the kernel. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # 5.7 Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers") Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390/mm: add (non)secure page access exceptions handlersVasily Gorbik1-0/+2
Add exceptions handlers performing transparent transition of non-secure pages to secure (import) upon guest access and secure pages to non-secure (export) upon hypervisor access. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> [frankja@linux.ibm.com: adding checks for failures] Signed-off-by: Janosch Frank <frankja@linux.ibm.com> [imbrenda@linux.ibm.com: adding a check for gmap fault] Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-22s390: fix __EMIT_BUG() macroSven Schnelle1-0/+1
Setting a kprobe on getname_flags() failed: $ echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events -bash: echo: write error: Invalid argument Debugging the kprobes code showed that the address of getname_flags() is contained in the __bug_table. Kprobes doesn't allow to set probes at BUG() locations. $ objdump -j __bug_table -x build/fs/namei.o [..] 0000000000000108 R_390_PC32 .text+0x00000000000075a8 000000000000010c R_390_PC32 .L223+0x0000000000000004 I was expecting getname_flags() to start with a BUG(), but: 7598: e3 20 10 00 00 04 lg %r2,0(%r1) 759e: c0 f4 00 00 00 00 jg 759e <putname+0x7e> 75a0: R_390_PLT32DBL kmem_cache_free+0x2 75a4: a7 f4 00 01 j 75a6 <putname+0x86> 00000000000075a8 <getname_flags>: 75a8: c0 04 00 00 00 00 brcl 0,75a8 <getname_flags> 75ae: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15) 75b4: b9 04 00 ef lgr %r14,%r15 75b8: e3 f0 ff a8 ff 71 lay %r15,-88(%r15) So the BUG() is actually the last opcode of the previous function. Fix this by switching to using the MONITOR CALL (MC) instruction, and set the entry in __bug_table to the beginning of that MC. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-14PM: hibernate: powerpc: Expose pfn_is_nosave() prototypeMathieu Malaterre1-1/+0
The declaration for pfn_is_nosave is only available in kernel/power/power.h. Since this function can be override in arch, expose it globally. Having a prototype will make sure to avoid warning (sometime treated as error with W=1) such as: arch/powerpc/kernel/suspend.c:18:5: error: no previous prototype for 'pfn_is_nosave' [-Werror=missing-prototypes] This moves the declaration into a globally visible header file and add missing include to avoid a warning on powerpc. Also remove the duplicated prototypes since not required anymore. Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-02s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTRMartin Schwidefsky1-1/+1
Make the call chain more reliable by tagging the ftrace stack entries with the stack pointer that is associated with the return address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390: add support for virtually mapped kernel stacksMartin Schwidefsky1-0/+3
With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25s390/boot: make head.S and als.c be part of the decompressor onlyVasily Gorbik1-1/+0
Since uncompressed kernel image does not have to be bootable anymore, move head.S, head_kdump.S and als.c to boot/ folder and compile them in just in the decompressor. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390/early: move functions which may not access bss section to extra fileHeiko Carstens1-0/+1
Move functions which may not access bss section to extra file. This makes it easier to verify that all early functions which may not rely on an initialized bss section are not accessing it. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-13Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09s390/sthyi: add s390_sthyi system callQingFeng Hao1-0/+1
Add a syscall of s390_sthyi to implement STHYI instruction in LPAR which reuses the implementation for KVM by Janosch Frank - commit 95ca2cb57985 ("KVM: s390: Add sthyi emulation"). STHYI(Store Hypervisor Information) is an emulated z/VM instruction that provides a guest with basic information about the layers it is running on. This includes information about the cpu configuration of both the machine and the lpar, as well as their names, machine model and machine type. This information enables an application to determine the maximum capacity of CPs and IFLs available to software. For the arguments of s390_sthyi, code shall be 0 and flags is reserved for future use, info is the output argument to store the required hypervisor info. Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22s390: add a system call for guarded storageMartin Schwidefsky1-0/+2
This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-23s390: restore address space when returning to user spaceHeiko Carstens1-0/+1
Unbalanced set_fs usages (e.g. early exit from a function and a forgotten set_fs(USER_DS) call) may lead to a situation where the secondary asce is the kernel space asce when returning to user space. This would allow user space to modify kernel space at will. This would only be possible with the above mentioned kernel bug, however we can detect this and fix the secondary asce before returning to user space. Therefore a new TIF_ASCE_SECONDARY which is used within set_fs. When returning to user space check if TIF_ASCE_SECONDARY is set, which would indicate a bug. If it is set print a message to the console, fixup the secondary asce, and then return to user space. This is similar to what is being discussed for x86 and arm: "[RFC] syscalls: Restore address limit after a syscall". Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-07-31s390/als: convert architecture level set code to CHeiko Carstens1-0/+2
There is no reason to have this code in assembly language. Therefore convert it to C. Note that this code needs special treatment: it is called very early and one of the side effects is that e.g. the bss section is not cleared. Therefore the preferred way for static variables is to put them on the stack which has a size of 16KB. There is no functional change with this patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-05-10s390: add missing declarationsHeiko Carstens1-0/+4
arch_dup_task_struct and the per cpu variable mt_cycles are globally visible, but do not have any header file with a declaration. Therefore add it so we have proper type checking in place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/udelay: make udelay have busy loop semanticsHeiko Carstens1-1/+0
When using systemtap it was observed that our udelay implementation is rather suboptimal if being called from a kprobe handler installed by systemtap. The problem observed when a kprobe was installed on lock_acquired(). When the probe was hit the kprobe handler did call udelay, which set up an (internal) timer and reenabled interrupts (only the clock comparator interrupt) and waited for the interrupt. This is an optimization to avoid that the cpu is busy looping while waiting that enough time passes. The problem is that the interrupt handler still does call irq_enter()/irq_exit() which then again can lead to a deadlock, since some accounting functions may take locks as well. If one of these locks is the same, which caused lock_acquired() to be called, we have a nice deadlock. This patch reworks the udelay code for the interrupts disabled case to immediately leave the low level interrupt handler when the clock comparator interrupt happens. That way no C code is being called and the deadlock cannot happen anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/fpu: always enable the vector facility if it is availableHendrik Brueckner1-2/+0
If the kernel detects that the s390 hardware supports the vector facility, it is enabled by default at an early stage. To force it off, use the novx kernel parameter. Note that there is a small time window, where the vector facility is enabled before it is forced to be off. With enabling the vector facility by default, the FPU save and restore functions can be improved. They do not longer require to manage expensive control register updates to enable or disable the vector enablement control for particular processes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-08s390/signal: add sys_sigreturn and sys_rt_sigreturn declarationsHeiko Carstens1-1/+3
Get rid of sparse warnings like this one: arch/s390/kernel/signal.c:244:1: warning: symbol 'sys_sigreturn' was not declared. Should it be static? Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-11-19s390/kernel: add system calls for PCI memory accessAlexey Ishchuk1-0/+2
Add the new __NR_s390_pci_mmio_write and __NR_s390_pci_mmio_read system calls to allow user space applications to access device PCI I/O memory pages on s390x platform. [ Martin Schwidefsky: some code beautification ] Signed-off-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09s390: add support for vector extensionMartin Schwidefsky1-0/+3
The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09s390/idle: consolidate idle functions and definitionsMartin Schwidefsky1-1/+1
Move the C functions and definitions related to the idle state handling to arch/s390/include/asm/idle.h and arch/s390/kernel/idle.c. The function s390_get_idle_time is renamed to arch_cpu_idle_time and vtime_stop_cpu to enabled_wait. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25s390/uprobes: architecture backend for uprobesJan Willeke1-0/+1
Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-06s390: Use get_signal() signal_setup_done()Richard Weinberger1-2/+2
Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-03-06s390/compat: get rid of compat wrapper assembly codeHeiko Carstens1-5/+0
Now that all compat syscalls have been converted to use the COMPAT_SYSCALL_DEFINE macros, we don't need to compat syscall wrapper assembly code anymore. So remove it and fix up the system call table accordingly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-03-04s390/compat: convert system call wrappers to C part 15Heiko Carstens1-0/+1
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-03-04s390/compat: convert system call wrappers to C part 05Heiko Carstens1-0/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-11-04s390/mm,tlb: correct tlb flush on page table upgradeMartin Schwidefsky1-1/+0
The IDTE instruction used to flush TLB entries for a specific address space uses the address-space-control element (ASCE) to identify affected TLB entries. The upgrade of a page table adds a new top level page table which changes the ASCE. The TLB entries associated with the old ASCE need to be flushed and the ASCE for the address space needs to be replaced synchronously on all CPUs which currently use it. The concept of a lazy ASCE update with an exception handler is broken. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07s390: make various functions static, add declarations to header filesHeiko Carstens1-12/+6
Make various functions static, add declarations to header files to fix a couple of sparse findings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-06-26s390/irq: store interrupt information in pt_regsMartin Schwidefsky1-1/+1
Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/hibernate: Save and restore absolute zero pagesMichael Holzheu1-0/+1
Since commit 5f954c34 ([S390] hibernation: fix lowcore handling) the absolute zero lowcore is lost during suspend/resume. For example, this leads to the problem that the re-IPL device for kdump is no longer set after resume. With this patch during suspend a buffer is allocated in the new PM notifier "suspend_pm_cb" and then the absolute zero lowcore is saved to that buffer. The resume code then copies back this buffer to absolute zero and afterwards the PM notifier releases the memory. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-04s390: switch to generic old sigaction()Al Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-04s390: switch to generic old sigsuspendAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-04s390: switch to generic sigaltstackAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
2012-11-29take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.hAl Viro1-4/+0
now it can be done... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-23s390/traps: preinitialize program check tableHeiko Carstens1-1/+20
Preinitialize the program check table, so we can put it into the read-only data section. Also use only four byte entries for the table, since each program check handler resides within the first 2GB. Therefore this reduces the size of the table by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-01s390: fold execve_tail() into start_thread(), convert to generic sys_execve()Al Viro1-3/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-20s390/vtimer: rework virtual timer interfaceMartin Schwidefsky1-3/+1
The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-01pull clearing RESTORE_SIGMASK into block_sigmask()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-11[S390] irq: external interrupt code passingHeiko Carstens1-1/+2
The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11[S390] rework idle codeMartin Schwidefsky1-1/+4
Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11[S390] rework smp codeMartin Schwidefsky1-1/+8
Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27[S390] cleanup trap handlingMartin Schwidefsky1-5/+5
Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse warnings about missing prototypesMartin Schwidefsky1-2/+11
Add prototypes and includes for functions used in different modules. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24[S390] cleanup program check handler prototypesMartin Schwidefsky1-4/+3
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] ptrace cleanupMartin Schwidefsky1-1/+1
Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>