summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2024-01-25riscv: tlb: fix __p*d_free_tlb()Jisheng Zhang1-3/+17
If non-leaf PTEs I.E pmd, pud or p4d is modified, a sfence.vma is a must for safe, imagine if an implementation caches the non-leaf translation in TLB, although I didn't meet this HW so far, but it's possible in theory. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: c5e9b2c2ae82 ("riscv: Improve tlb_flush()") Link: https://lore.kernel.org/r/20231219175046.2496-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24Merge patch series "riscv: Increase mmap_rnd_bits_max on Sv48/57"Palmer Dabbelt1-0/+6
Sami Tolvanen <samitolvanen@google.com> says: We noticed that 64-bit RISC-V kernels limit mmap_rnd_bits to 24 even if the hardware supports a larger virtual address space size [1]. These two patches allow mmap_rnd_bits_max to be changed during init, and bumps up the maximum randomness if we end up setting up 4/5-level paging at boot. * b4-shazam-merge: riscv: mm: Update mmap_rnd_bits_max mm: Change mmap_rnd_bits_max to __ro_after_init Link: https://lore.kernel.org/r/20230929211155.3910949-4-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv: mm: Update mmap_rnd_bits_maxSami Tolvanen1-0/+6
ARCH_MMAP_RND_BITS_MAX is based on Sv39, which leaves a few potential bits of mmap randomness on the table if we end up enabling 4/5-level paging. Update mmap_rnd_bits_max to take the final address space size into account. This increases mmap_rnd_bits_max from 24 to 33 with Sv48/57. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230929211155.3910949-6-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-24riscv, bpf: Fix unpredictable kernel crash about RV64 struct_opsPu Lehui1-2/+3
We encountered a kernel crash triggered by the bpf_tcp_ca testcase as show below: Unable to handle kernel paging request at virtual address ff60000088554500 Oops [#1] ... CPU: 3 PID: 458 Comm: test_progs Tainted: G OE 6.8.0-rc1-kselftest_plain #1 Hardware name: riscv-virtio,qemu (DT) epc : 0xff60000088554500 ra : tcp_ack+0x288/0x1232 epc : ff60000088554500 ra : ffffffff80cc7166 sp : ff2000000117ba50 gp : ffffffff82587b60 tp : ff60000087be0040 t0 : ff60000088554500 t1 : ffffffff801ed24e t2 : 0000000000000000 s0 : ff2000000117bbc0 s1 : 0000000000000500 a0 : ff20000000691000 a1 : 0000000000000018 a2 : 0000000000000001 a3 : ff60000087be03a0 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000021 a7 : ffffffff8263f880 s2 : 000000004ac3c13b s3 : 000000004ac3c13a s4 : 0000000000008200 s5 : 0000000000000001 s6 : 0000000000000104 s7 : ff2000000117bb00 s8 : ff600000885544c0 s9 : 0000000000000000 s10: ff60000086ff0b80 s11: 000055557983a9c0 t3 : 0000000000000000 t4 : 000000000000ffc4 t5 : ffffffff8154f170 t6 : 0000000000000030 status: 0000000200000120 badaddr: ff60000088554500 cause: 000000000000000c Code: c796 67d7 0000 0000 0052 0002 c13b 4ac3 0000 0000 (0001) 0000 ---[ end trace 0000000000000000 ]--- The reason is that commit 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") changes the func_addr of arch_prepare_bpf_trampoline in struct_ops from NULL to non-NULL, while we use func_addr on RV64 to differentiate between struct_ops and regular trampoline. When the struct_ops testcase is triggered, it emits wrong prologue and epilogue, and lead to unpredictable issues. After commit 2cd3e3772e41, we can use BPF_TRAMP_F_INDIRECT to distinguish them as it always be set in struct_ops. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240123023207.1917284-1-pulehui@huaweicloud.com
2024-01-23Revert "RISC-V: mark hibernation as nonportable"Conor Dooley1-4/+1
Revert commit ed309ce52218 ("RISC-V: mark hibernation as nonportable") as it appears the broken versions of OpenSBI have not made it to production on any systems that support hibernation. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230802-chef-throng-d9de8b672a49@wendy Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23Merge patch series "RISC-V crypto with reworked asm files"Palmer Dabbelt22-0/+3271
Eric Biggers <ebiggers@kernel.org> says: This patchset, which applies to v6.8-rc1, adds cryptographic algorithm implementations accelerated using the RISC-V vector crypto extensions (https://github.com/riscv/riscv-crypto/releases/download/v1.0.0/riscv-crypto-spec-vector.pdf) and RISC-V vector extension (https://github.com/riscv/riscv-v-spec/releases/download/v1.0/riscv-v-spec-1.0.pdf). The following algorithms are included: AES in ECB, CBC, CTR, and XTS modes; ChaCha20; GHASH; SHA-2; SM3; and SM4. In general, the assembly code requires a 64-bit RISC-V CPU with VLEN >= 128, little endian byte order, and vector unaligned access support. The ECB, CTR, XTS, and ChaCha20 code is designed to naturally scale up to larger VLEN values. Building the assembly code requires tip-of-tree binutils (future 2.42) or tip-of-tree clang (future 18.x). All algorithms pass testing in QEMU, using CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y. Much of the assembly code is derived from OpenSSL code that was added by https://github.com/openssl/openssl/pull/21923. It's been cleaned up for integration with the kernel, e.g. reducing code duplication, eliminating use of .inst and perlasm, and fixing a few bugs. This patchset incorporates the work of multiple people, including Jerry Shih, Heiko Stuebner, Christoph Müllner, Phoebe Chen, Charalampos Mitrodimas, and myself. This patchset went through several versions from Heiko (last version https://lore.kernel.org/linux-crypto/20230711153743.1970625-1-heiko@sntech.de), then several versions from Jerry (last version: https://lore.kernel.org/linux-crypto/20231231152743.6304-1-jerry.shih@sifive.com), then finally several versions from me. Thanks to everyone who has contributed to this patchset or its prerequisites. * b4-shazam-merge: crypto: riscv - add vector crypto accelerated SM4 crypto: riscv - add vector crypto accelerated SM3 crypto: riscv - add vector crypto accelerated SHA-{512,384} crypto: riscv - add vector crypto accelerated SHA-{256,224} crypto: riscv - add vector crypto accelerated GHASH crypto: riscv - add vector crypto accelerated ChaCha20 crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS} RISC-V: hook new crypto subdir into build-system RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTO RISC-V: add helper function to read the vector VLEN Link: https://lore.kernel.org/r/20240122002024.27477-1-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated SM4Jerry Shih4-0/+244
Add an implementation of SM4 using the Zvksed extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-11-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated SM3Jerry Shih4-0/+250
Add an implementation of SM3 using the Zvksh extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-10-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated SHA-{512,384}Jerry Shih4-0/+350
Add an implementation of SHA-512 and SHA-384 using the Zvknhb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Signed-off-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-9-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated SHA-{256,224}Jerry Shih4-0/+376
Add an implementation of SHA-256 and SHA-224 using the Zvknha or Zvknhb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and greatly reducing code duplication. Co-developed-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Signed-off-by: Charalampos Mitrodimas <charalampos.mitrodimas@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-8-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated GHASHJerry Shih4-0/+253
Add an implementation of GHASH using the zvkg extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', reducing code duplication, and eliminating unnecessary endianness conversions. Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-7-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated ChaCha20Jerry Shih4-0/+409
Add an implementation of ChaCha20 using the Zvkb extension. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using a regular .S file instead of the so-called perlasm, using the assembler instead of bare '.inst', and reducing code duplication. Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-6-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS}Jerry Shih7-0/+1364
Add implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS, as well as bare (single-block) AES, using the RISC-V vector crypto extensions. The assembly code is derived from OpenSSL code (openssl/openssl#21923) that was dual-licensed so that it could be reused in the kernel. Nevertheless, the assembly has been significantly reworked for integration with the kernel, for example by using regular .S files instead of the so-called perlasm, using the assembler instead of bare '.inst', greatly reducing code duplication, supporting AES-192, and making the code use the same AES key structure as the C code. Co-developed-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-5-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23RISC-V: hook new crypto subdir into build-systemHeiko Stuebner3-0/+7
Create a crypto subdirectory for added accelerated cryptography routines and hook it into the riscv Kbuild and the main crypto Kconfig. Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-4-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTOEric Biggers1-0/+7
Add a kconfig symbol that indicates whether the toolchain supports the vector crypto extensions. This is needed by the RISC-V crypto code. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-3-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23RISC-V: add helper function to read the vector VLENHeiko Stuebner1-0/+11
VLEN describes the length of each vector register and some instructions need specific minimal VLENs to work correctly. The vector code already includes a variable riscv_v_vsize that contains the value of "32 vector registers with vlenb length" that gets filled during boot. vlenb is the value contained in the CSR_VLENB register and the value represents "VLEN / 8". So add riscv_vector_vlen() to return the actual VLEN value for in-kernel users when they need to check the available VLEN. Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jerry Shih <jerry.shih@sifive.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240122002024.27477-2-ebiggers@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-23riscv: dts: starfive: jh7110: Add PWM node and pins configurationWilliam Qiu2-0/+31
Add OpenCores PWM controller node and add PWM pins configuration on VisionFive 2 board. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-23riscv: dts: starfive: jh7100: Add PWM node and pins configurationWilliam Qiu2-0/+33
Add OpenCores PWM controller node and add PWM pins configuration on VisionFive 1 board. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-22RISC-V: build: Allow LTO to be selectedWende Tan3-0/+11
Allow LTO to be selected for RISC-V, only when LLD >= 14, since there is an issue [1] in prior LLD versions that prevents LLD to generate proper machine code for RISC-V when writing `nop`s. To avoid boot failures in QEMU [2], '-mattr=+c' and '-mattr=+relax' need to be passed via '-mllvm' to ld.lld, as there appears to be an issue with LLVM's target-features and LTO [3], which can result in incorrect relocations to branch targets [4]. Once this is fixed in LLVM, it can be made conditional on affected ld.lld versions. Disable LTO for arch/riscv/kernel/pi, as llvm-objcopy expects an ELF object file when manipulating the files in that subfolder, rather than LLVM bitcode. [1] https://github.com/llvm/llvm-project/issues/50505, resolved by LLVM commit e63455d5e0e5 ("[MC] Use local MCSubtargetInfo in writeNops") [2] https://github.com/ClangBuiltLinux/linux/issues/1942 [3] https://github.com/llvm/llvm-project/issues/59350 [4] https://github.com/llvm/llvm-project/issues/65090 Tested-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Co-developed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231017-riscv-lto-v4-1-e7810b24e805@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-22riscv: remove unneeded #include <asm-generic/export.h>Masahiro Yamada1-1/+0
Commit 62694797f56b ("use linux/export.h rather than asm-generic/export.h") replaced deprecated <asm-generic/export.h> inclusions. Commit c2a658d41924 ("riscv: lib: vectorize copy_to_user/copy_from_user") introduced a new instance of #include <asm-generic/export.h>. arch/riscv/lib/uaccess_vector.S does not use EXPORT_SYMBOL, hence this include directive is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240120213312.3033528-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-20Merge tag 'riscv-for-linus-6.8-mw4' of ↵Linus Torvalds50-170/+2141
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ...
2024-01-19RISC-V: KVM: Allow Zfa extension for Guest/VMAnup Patel2-0/+3
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zfa extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VMAnup Patel2-0/+6
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zvfh[min] extensions for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zihintntl extension for Guest/VMAnup Patel2-0/+3
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zihintntl extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zfh[min] extensions for Guest/VMAnup Patel2-0/+6
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zfh[min] extensions for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow vector crypto extensions for Guest/VMAnup Patel2-0/+30
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable vector crypto extensions for Guest/VM. This includes extensions Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow scalar crypto extensions for Guest/VMAnup Patel2-0/+30
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable scalar crypto extensions for Guest/VM. This includes extensions Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19RISC-V: KVM: Allow Zbc extension for Guest/VMAnup Patel2-0/+3
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zbc extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-01-19Merge tag 'iommu-updates-v6.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Fix race conditions in device probe path - Retire IOMMU bus_ops - Support for passing custom allocators to page table drivers - Clean up Kconfig around IOMMU_SVA - Support for sharing SVA domains with all devices bound to a mm - Firmware data parsing cleanup - Tracing improvements for iommu-dma code - Some smaller fixes and cleanups ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Document Adreno clocks for Qualcomm's SM8350 SoC - SMMUv2: - Implement support for the ->domain_alloc_paging() callback - Ensure Secure context is restored following suspend of Qualcomm SMMU implementation - SMMUv3: - Disable stalling mode for the "quiet" context descriptor - Minor refactoring and driver cleanups Intel VT-d driver: - Cleanup and refactoring AMD IOMMU driver: - Improve IO TLB invalidation logic - Small cleanups and improvements Rockchip IOMMU driver: - DT binding update to add Rockchip RK3588 Apple DART driver: - Apple M1 USB4/Thunderbolt DART support - Cleanups Virtio IOMMU driver: - Add support for iotlb_sync_map - Enable deferred IO TLB flushes" * tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits) iommu: Don't reserve 0-length IOVA region iommu/vt-d: Move inline helpers to header files iommu/vt-d: Remove unused vcmd interfaces iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through() iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly iommu/sva: Fix memory leak in iommu_sva_bind_device() dt-bindings: iommu: rockchip: Add Rockchip RK3588 iommu/dma: Trace bounce buffer usage when mapping buffers iommu/arm-smmu: Convert to domain_alloc_paging() iommu/arm-smmu: Pass arm_smmu_domain to internal functions iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED iommu/arm-smmu: Convert to a global static identity domain iommu/arm-smmu: Reorganize arm_smmu_domain_add_master() iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent() iommu/arm-smmu-v3: Add a type for the STE iommu/arm-smmu-v3: disable stall for quiet_cd iommu/qcom: restore IOMMU state if needed iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible iommu/arm-smmu-qcom: Add missing GMU entry to match table ...
2024-01-19Merge tag 'percpu-for-6.8' of ↵Linus Torvalds5-1/+18
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu updates from Dennis Zhou: "Enable percpu page allocator for RISC-V. There are RISC-V configurations with sparse NUMA configurations and small vmalloc space causing dynamic percpu allocations to fail as the backing chunk stride is too far apart" * tag 'percpu-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: riscv: Enable pcpu page first chunk allocator mm: Introduce flush_cache_vmap_early()
2024-01-19riscv: lib: Check if output in asm goto supportedCharlie Jenkins1-0/+2
The output field of an asm goto statement is not supported by all compilers. If it is not supported, fallback to the non-optimized code. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: a04c192eabfb ("riscv: Add checksum library") Link: https://lore.kernel.org/r/20240118-csum_remove_output_operands_asm_goto-v2-1-5d1b73cf93d4@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-19riscv: Fix build error on rv32 + XIPAlexandre Ghiti1-0/+4
commit 66f1e6809397 ("riscv: Make XIP bootable again") restricted page offset to the sv39 page offset instead of the default sv57, which makes sense since probably the platforms that target XIP kernels do not support anything else than sv39 and we do not try to find out the largest address space supported on XIP kernels (ie set_satp_mode()). But PAGE_OFFSET_L3 is not defined for rv32, so fix the build error by restoring the previous behaviour which picks CONFIG_PAGE_OFFSET for rv32. Fixes: 66f1e6809397 ("riscv: Make XIP bootable again") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-riscv/344dca85-5c48-44e1-bc64-4fa7973edd12@infradead.org/T/#u Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20240118212120.2087803-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18Merge tag 'driver-core-6.8-rc1' of ↵Linus Torvalds2-16/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing major in here this release cycle, just lots of small cleanups and some tweaks on kernfs that in the very end, got reverted and will come back in a safer way next release cycle. Included in here are: - more driver core 'const' cleanups and fixes - fw_devlink=rpm is now the default behavior - kernfs tiny changes to remove some string functions - cpu handling in the driver core is updated to work better on many systems that add topologies and cpus after booting - other minor changes and cleanups All of the cpu handling patches have been acked by the respective maintainers and are coming in here in one series. Everything has been in linux-next for a while with no reported issues" * tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits) Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock" kernfs: convert kernfs_idr_lock to an irq safe raw spinlock class: fix use-after-free in class_register() PM: clk: make pm_clk_add_notifier() take a const pointer EDAC: constantify the struct bus_type usage kernfs: fix reference to renamed function driver core: device.h: fix Excess kernel-doc description warning driver core: class: fix Excess kernel-doc description warning driver core: mark remaining local bus_type variables as const driver core: container: make container_subsys const driver core: bus: constantify subsys_register() calls driver core: bus: make bus_sort_breadthfirst() take a const pointer kernfs: d_obtain_alias(NULL) will do the right thing... driver core: Better advertise dev_err_probe() kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy() initramfs: Expose retained initrd as sysfs file fs/kernfs/dir: obey S_ISGID kernel/cgroup: use kernfs_create_dir_ns() ...
2024-01-18riscv: optimize ELF relocation function in riscvMaxim Kochetkov1-4/+16
The patch can optimize the running times of insmod command by modify ELF relocation function. In the 5.10 and latest kernel, when install the riscv ELF drivers which contains multiple symbol table items to be relocated, kernel takes a lot of time to execute the relocation. For example, we install a 3+MB driver need 180+s. We focus on the riscv architecture handle R_RISCV_HI20 and R_RISCV_LO20 type items relocation function in the arch\riscv\kernel\module.c and find that there are two-loops in the function. If we modify the begin number in the second for-loops iteration, we could save significant time for installation. We install the same 3+MB driver could just need 2s. Signed-off-by: Amma Lee <lixiaoyun@binary-semi.com> Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231214063906.13612-1-fido_max@inbox.ru Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18RISC-V: Implement archrandom when Zkr is availableSamuel Ortiz2-0/+81
The Zkr extension is ratified and provides 16 bits of entropy seed when reading the SEED CSR. We can implement arch_get_random_seed_longs() by doing multiple csrrw to that CSR and filling an unsigned long with valid entropy bits. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Samuel Ortiz <sameo@rivosinc.com> Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231130111704.1319081-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Optimize hweight API with Zbb extensionXiao Wang2-1/+81
The Hamming Weight of a number is the total number of bits set in it, so the cpop/cpopw instruction from Zbb extension can be used to accelerate hweight() API. Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231112095244.4015351-1-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efiMasahiro Yamada1-0/+2
A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image GZIP arch/riscv/boot/Image.gz AS arch/riscv/boot/loader.o AS arch/riscv/boot/loader.o Kernel: arch/riscv/boot/Image is ready PAD arch/riscv/boot/vmlinux.bin GZIP arch/riscv/boot/vmlinuz Kernel: arch/riscv/boot/loader is ready OBJCOPY arch/riscv/boot/loader.bin Kernel: arch/riscv/boot/loader.bin is ready Kernel: arch/riscv/boot/Image.gz is ready OBJCOPY arch/riscv/boot/vmlinuz.o LD arch/riscv/boot/vmlinuz.efi.elf OBJCOPY arch/riscv/boot/vmlinuz.efi Kernel: arch/riscv/boot/vmlinuz.efi is ready The log "OBJCOPY arch/riscv/boot/Image" is displayed 5 times. (also "AS arch/riscv/boot/loader.o" twice.) It indicates that 5 threads simultaneously enter arch/riscv/boot/ and write to arch/riscv/boot/Image. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image PAD arch/riscv/boot/vmlinux.bin truncate: Invalid number: 'arch/riscv/boot/vmlinux.bin' make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/riscv/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/riscv/boot/vmlinux.bin' make[1]: *** [arch/riscv/Makefile:167: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... Kernel: arch/riscv/boot/Image is ready GZIP arch/riscv/boot/Image.gz AS arch/riscv/boot/loader.o AS arch/riscv/boot/loader.o Kernel: arch/riscv/boot/loader is ready OBJCOPY arch/riscv/boot/loader.bin Kernel: arch/riscv/boot/loader.bin is ready Kernel: arch/riscv/boot/Image.gz is ready make: *** [Makefile:234: __sub-make] Error 2 Image.gz, loader, vmlinuz.efi depend on Image. loader.bin depends on loader. Such dependencies are not specified in arch/riscv/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231119100024.2370992-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18Merge patch series "riscv: ftrace: Miscellaneous ftrace improvements"Palmer Dabbelt4-55/+195
Björn Töpel <bjorn@kernel.org> says: This series includes a three ftrace improvements for RISC-V: 1. Do not require to run recordmcount at build time (patch 1) 2. Simplification of the function graph functionality (patch 2) 3. Enable DYNAMIC_FTRACE_WITH_DIRECT_CALLS (patch 3 and 4) The series has been tested on Qemu/rv64 virt/Debian sid with the following test configs: CONFIG_FTRACE_SELFTEST=y CONFIG_FTRACE_STARTUP_TEST=y CONFIG_SAMPLE_FTRACE_DIRECT=m CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m CONFIG_SAMPLE_FTRACE_OPS=m All tests pass. * b4-shazam-merge: samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY Link: https://lore.kernel.org/r/20231130121531.1178502-1-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]Song Shuai1-0/+2
Add RISC-V variants of the ftrace-direct* samples. Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Signed-off-by: Song Shuai <suagrfillet@gmail.com> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231130121531.1178502-5-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS supportSong Shuai3-0/+18
Select the DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the register_ftrace_direct[_multi] interfaces allowing users to register the customed trampoline (direct_caller) as the mcount for one or more target functions. And modify_ftrace_direct[_multi] are also provided for modifying direct_caller. To make the direct_caller and the other ftrace hooks (e.g. function/fgraph tracer, k[ret]probes) co-exist, a temporary register is nominated to store the address of direct_caller in ftrace_regs_caller. After the setting of the address direct_caller by direct_ops->func and the RESTORE_REGS in ftrace_regs_caller, direct_caller will be jumped to by the `jr` inst. Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support for RISC-V. Signed-off-by: Song Shuai <suagrfillet@gmail.com> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231130121531.1178502-4-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: ftrace: Make function graph use ftrace directlySong Shuai3-56/+175
Similar to commit 0c0593b45c9b ("x86/ftrace: Make function graph use ftrace directly") and commit c4a0ebf87ceb ("arm64/ftrace: Make function graph use ftrace directly"), RISC-V has no need for a special graph tracer hook. The graph_ops::func function can be used to install the return_hooker. This cleanup only changes the FTRACE_WITH_REGS implementation, leaving the mcount-based implementation is unaffected. Perform the simplification, and also cleanup the register save/restore macros. Signed-off-by: Song Shuai <suagrfillet@gmail.com> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231130121531.1178502-3-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRYSong Shuai1-0/+1
In commit afc76b8b8011 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT") RISC-V added support for -fpatchable-function-entry, which removes the need for recordmcount. Select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY to tell the build system not to run recordmcount. Link: https://lore.kernel.org/linux-riscv/CAAYs2=j3Eak9vU6xbAw0zPuoh00rh8v5C2U3fePkokZFibWs2g@mail.gmail.com/T/#t Link: https://lore.kernel.org/linux-riscv/Y4jtfrJt+%2FQ5nMOz@spud/ Signed-off-by: Song Shuai <suagrfillet@gmail.com> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231130121531.1178502-2-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18Merge patch series "RISC-V: Disable DWARF5 with known broken LLVM versions"Palmer Dabbelt2-3/+15
Nathan Chancellor <nathan@kernel.org> says: This series disables DWARF5 for LLVM versions where it is known to be broken due to linker relaxation. * b4-shazam-merge: lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6 Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-0-aedf00a382ac@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Restrict DWARF5 when building with LLVM to known working versionsNathan Chancellor1-0/+9
LLVM prior to 18.0.0 would generate incorrect debug info for DWARF5 due to linker relaxation, which was worked around in clang by defaulting RISC-V to DWARF4 [1]. Unfortunately, this workaround does not work for the kernel because the DWARF version can be independently changed from the default in Kconfig. Do not allow DWARF5 to be selected for RISC-V when using linker relaxation (ld.lld >= 15.0.0) and a version of LLVM that does not have the fixes (the integrated assembler [2] and ld.lld [3] < 18.0.0) necessary to generate the correct debug info. Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6 [1] Link: https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a [2] Link: https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77 [3] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-2-aedf00a382ac@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Hoist linker relaxation disabling logic into KconfigNathan Chancellor2-3/+6
Certain configurations may need to be disabled if linker relaxation is in use, such as DWARF5 with ld.lld < 18. Hoist the logic of whether or not linker relaxation is in use into Kconfig so decisions can be made at configuration time. Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-1-aedf00a382ac@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18Merge patch series "riscv: Add fine-tuned checksum functions"Palmer Dabbelt5-4/+510
Charlie Jenkins <charlie@rivosinc.com> says: Each architecture generally implements fine-tuned checksum functions to leverage the instruction set. This patch adds the main checksum functions that are used in networking. Tested on QEMU, this series allows the CHECKSUM_KUNIT tests to complete an average of 50.9% faster. This patch takes heavy use of the Zbb extension using alternatives patching. To test this patch, enable the configs for KUNIT, then CHECKSUM_KUNIT. I have attempted to make these functions as optimal as possible, but I have not ran anything on actual riscv hardware. My performance testing has been limited to inspecting the assembly, running the algorithms on x86 hardware, and running in QEMU. ip_fast_csum is a relatively small function so even though it is possible to read 64 bits at a time on compatible hardware, the bottleneck becomes the clean up and setup code so loading 32 bits at a time is actually faster. * b4-shazam-merge: kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-0-1c50de5f2167@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Add checksum libraryCharlie Jenkins3-0/+338
Provide a 32 and 64 bit version of do_csum. When compiled for 32-bit will load from the buffer in groups of 32 bits, and when compiled for 64-bit will load in groups of 64 bits. Additionally provide riscv optimized implementation of csum_ipv6_magic. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Xiao Wang <xiao.w.wang@intel.com> Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-4-1c50de5f2167@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Add checksum headerCharlie Jenkins1-0/+82
Provide checksum algorithms that have been designed to leverage riscv instructions such as rotate. In 64-bit, can take advantage of the larger register to avoid some overflow checking. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Xiao Wang <xiao.w.wang@intel.com> Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-3-1c50de5f2167@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18riscv: Add static key for misaligned accessesCharlie Jenkins2-3/+89
Support static branches depending on the value of misaligned accesses. This will be used by a later patch in the series. At any point in time, this static branch will only be enabled if all online CPUs are considered "fast". Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-2-1c50de5f2167@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds20-95/+708
Pull kvm updates from Paolo Bonzini: "Generic: - Use memdup_array_user() to harden against overflow. - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures. - Clean up Kconfigs that all KVM architectures were selecting - New functionality around "guest_memfd", a new userspace API that creates an anonymous file and returns a file descriptor that refers to it. guest_memfd files are bound to their owning virtual machine, cannot be mapped, read, or written by userspace, and cannot be resized. guest_memfd files do however support PUNCH_HOLE, which can be used to switch a memory area between guest_memfd and regular anonymous memory. - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify per-page attributes for a given page of guest memory; right now the only attribute is whether the guest expects to access memory via guest_memfd or not, which in Confidential SVMs backed by SEV-SNP, TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM). x86: - Support for "software-protected VMs" that can use the new guest_memfd and page attributes infrastructure. This is mostly useful for testing, since there is no pKVM-like infrastructure to provide a meaningfully reduced TCB. - Fix a relatively benign off-by-one error when splitting huge pages during CLEAR_DIRTY_LOG. - Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE. - Use more generic lockdep assertions in paths that don't actually care about whether the caller is a reader or a writer. - let Xen guests opt out of having PV clock reported as "based on a stable TSC", because some of them don't expect the "TSC stable" bit (added to the pvclock ABI by KVM, but never set by Xen) to be set. - Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL. - Advertise flush-by-ASID support for nSVM unconditionally, as KVM always flushes on nested transitions, i.e. always satisfies flush requests. This allows running bleeding edge versions of VMware Workstation on top of KVM. - Sanity check that the CPU supports flush-by-ASID when enabling SEV support. - On AMD machines with vNMI, always rely on hardware instead of intercepting IRET in some cases to detect unmasking of NMIs - Support for virtualizing Linear Address Masking (LAM) - Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state prior to refreshing the vPMU model. - Fix a double-overflow PMU bug by tracking emulated counter events using a dedicated field instead of snapshotting the "previous" counter. If the hardware PMC count triggers overflow that is recognized in the same VM-Exit that KVM manually bumps an event count, KVM would pend PMIs for both the hardware-triggered overflow and for KVM-triggered overflow. - Turn off KVM_WERROR by default for all configs so that it's not inadvertantly enabled by non-KVM developers, which can be problematic for subsystems that require no regressions for W=1 builds. - Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL "features". - Don't force a masterclock update when a vCPU synchronizes to the current TSC generation, as updating the masterclock can cause kvmclock's time to "jump" unexpectedly, e.g. when userspace hotplugs a pre-created vCPU. - Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths, partly as a super minor optimization, but mostly to make KVM play nice with position independent executable builds. - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on CONFIG_HYPERV as a minor optimization, and to self-document the code. - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation" at build time. ARM64: - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base granule sizes. Branch shared with the arm64 tree. - Large Fine-Grained Trap rework, bringing some sanity to the feature, although there is more to come. This comes with a prefix branch shared with the arm64 tree. - Some additional Nested Virtualization groundwork, mostly introducing the NV2 VNCR support and retargetting the NV support to that version of the architecture. - A small set of vgic fixes and associated cleanups. Loongarch: - Optimization for memslot hugepage checking - Cleanup and fix some HW/SW timer issues - Add LSX/LASX (128bit/256bit SIMD) support RISC-V: - KVM_GET_REG_LIST improvement for vector registers - Generate ISA extension reg_list using macros in get-reg-list selftest - Support for reporting steal time along with selftest s390: - Bugfixes Selftests: - Fix an annoying goof where the NX hugepage test prints out garbage instead of the magic token needed to run the test. - Fix build errors when a header is delete/moved due to a missing flag in the Makefile. - Detect if KVM bugged/killed a selftest's VM and print out a helpful message instead of complaining that a random ioctl() failed. - Annotate the guest printf/assert helpers with __printf(), and fix the various bugs that were lurking due to lack of said annotation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits) x86/kvm: Do not try to disable kvmclock if it was not enabled KVM: x86: add missing "depends on KVM" KVM: fix direction of dependency on MMU notifiers KVM: introduce CONFIG_KVM_COMMON KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache RISC-V: KVM: selftests: Add get-reg-list test for STA registers RISC-V: KVM: selftests: Add steal_time test support RISC-V: KVM: selftests: Add guest_sbi_probe_extension RISC-V: KVM: selftests: Move sbi_ecall to processor.c RISC-V: KVM: Implement SBI STA extension RISC-V: KVM: Add support for SBI STA registers RISC-V: KVM: Add support for SBI extension registers RISC-V: KVM: Add SBI STA info to vcpu_arch RISC-V: KVM: Add steal-update vcpu request RISC-V: KVM: Add SBI STA extension skeleton RISC-V: paravirt: Implement steal-time support RISC-V: Add SBI STA extension definitions RISC-V: paravirt: Add skeleton for pv-time support RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr() ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 09:03:17 +0300