summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2020-03-31RISC-V: Support cpu hotplugAtish Patra7-2/+180
This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-31RISC-V: Add supported for ordered booting method using HSMAtish Patra6-3/+121
Currently, all harts have to jump Linux in RISC-V. This complicates the multi-stage boot process as every transient stage also has to ensure all harts enter to that stage and jump to Linux afterwards. It also obstructs a clean Kexec implementation. SBI HSM extension provides alternate solutions where only a single hart need to boot and enter Linux. The booting hart can bring up secondary harts one by one afterwards. Add SBI HSM based cpu_ops that implements an ordered booting method in RISC-V. This change is also backward compatible with older firmware not implementing HSM extension. If a latest kernel is used with older firmware, it will continue to use the default spinning booting method. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Add SBI HSM extension definitionsAtish Patra1-0/+14
SBI specification defines HSM extension that allows to start/stop a hart by a supervisor anytime. The specification is available at https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc Add those definitions here. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Export SBI error to linux error mapping functionAtish Patra2-1/+4
All SBI related extensions will not be implemented in sbi.c to avoid bloating. Thus, sbi_err_map_linux_errno() will be used in other files implementing that specific extension. Export the function so that it can be used later. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Add cpu_ops and modify default booting methodAtish Patra5-21/+147
Currently, all non-booting harts start booting after the booting hart updates the per-hart stack pointer. This is done in a way that, it's difficult to implement any other booting method without breaking the backward compatibility. Define a cpu_ops method that allows to introduce other booting methods in future. Modify the current booting method to be compatible with cpu_ops. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Move relocate and few other functions out of __initAtish Patra2-72/+86
The secondary hart booting and relocation code are under .init section. As a result, it will be freed once kernel booting is done. However, ordered booting protocol and CPU hotplug always requires these functions to be present to bringup harts after initial kernel boot. Move the required functions to a different section and make sure that they are in memory within first 2MB offset as trampoline page directory only maps first 2MB. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Implement new SBI v0.2 extensionsAtish Patra3-4/+270
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. Implement the replacement extensions and few additional new SBI function calls that makes way for a better SBI interface in future. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Introduce a new config for SBI v0.1Atish Patra3-23/+118
We now have SBI v0.2 which is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. Introduce a new config and move all SBI v0.1 code under that config. This allows to implement the new replacement SBI extensions cleanly and remove v0.1 extensions easily in future. Currently, the config is enabled by default. Once all M-mode software, with v0.1, is no longer in use, this config option and all relevant code can be easily removed. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Add SBI v0.2 extension definitionsAtish Patra1-0/+21
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. This patch just defines these new extensions. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Add basic support for SBI v0.2Atish Patra3-73/+314
The SBI v0.2 introduces a base extension which is backward compatible with v0.1. Implement all helper functions and minimum required SBI calls from v0.2 for now. All other base extension function will be added later as per need. As v0.2 calling convention is backward compatible with v0.1, remove the v0.1 helper functions and just use v0.2 calling convention. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31RISC-V: Mark existing SBI as 0.1 SBI.Atish Patra1-19/+22
As per the new SBI specification, current SBI implementation version is defined as 0.1 and will be removed/replaced in future. Each of the function call in 0.1 is defined as a separate extension which makes easier to replace them one at a time. Rename existing implementation to reflect that. This patch is just a preparatory patch for SBI v0.2 and doesn't introduce any functional changes. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31Merge tag 'irq-core-2020-03-30' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ...
2020-03-31Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
2020-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-78/+95
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28Merge branch 'uaccess.futex' of ↵Thomas Gleixner1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into locking/core Pull uaccess futex cleanups for Al Viro: Consolidate access_ok() usage and the futex uaccess function zoo.
2020-03-28futex: arch_futex_atomic_op_inuser() calling conventions changeAl Viro1-3/+2
Move access_ok() in and pagefault_enable()/pagefault_disable() out. Mechanical conversion only - some instances don't really need a separate access_ok() at all (e.g. the ones only using get_user()/put_user(), or architectures where access_ok() is always true); we'll deal with that in followups. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-27RISC-V: Move all address space definition macros to one placeAtish Patra1-37/+41
We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set. --------------------------------------------------------------- ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’: ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared (first use in this function); did you mean ‘mem_map’? #define __pfn_to_page(pfn) (vmemmap + (pfn)) ^~~~~~~ ./include/asm-generic/memory_model.h:82:21: note: in expansion of macro ‘__pfn_to_page’ #define pfn_to_page __pfn_to_page ^~~~~~~~~~~~~ ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro ‘pfn_to_page’ return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT); --------------------------------------------------------------- Fix the compliation errors by moving all the address space definition macros before including pgtable-64.h. Fixes: 8ad8b72721d0 (riscv: Add KASAN support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26RISC-V: Only select essential drivers for SOC_VIRT configAnup Patel3-16/+30
The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: Use macro definition instead of magic numberZong Li1-1/+1
The KERN_VIRT_START defines the start virtual address of kernel space. Use this macro instead of magic number. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: Add support to dump the kernel page tablesZong Li5-0/+340
In a similar manner to arm64, x86, powerpc, etc., it can traverse all page tables, and dump the page table layout with the memory types and permissions. Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export the page table layout to userspace. Signed-off-by: Zong Li <zong.li@sifive.com> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: patch code by fixmap mappingZong Li1-9/+4
On strict kernel memory permission, the ftrace have to change the permission of text for dynamic patching the intructions. Use riscv_patch_text_nosync() to patch code instead of probe_kernel_write. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: introduce interfaces to patch kernel codeZong Li4-1/+137
On strict kernel memory permission, we couldn't patch code without writable permission. Preserve two holes in fixmap area, so we can map the kernel code temporarily to fixmap area, then patch the instructions. We need two pages here because we support the compressed instruction, so the instruction might be align to 2 bytes. When patching the 32-bit length instruction which is 2 bytes alignment, it will across two pages. Introduce two interfaces to patch kernel code: riscv_patch_text_nosync: - patch code without synchronization, it's caller's responsibility to synchronize all CPUs if needed. riscv_patch_text: - patch code and always synchronize with stop_machine() Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add macro to get instruction lengthZong Li2-1/+10
Extract the calculation of instruction length for common use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add STRICT_KERNEL_RWX supportZong Li3-0/+53
The commit contains that make text section as non-writable, rodata section as read-only, and data section as non-executable. The init section should be changed to non-executable. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add alignment for text, rodata and data sectionsZong Li2-1/+17
The kernel mapping will tried to optimize its mapping by using bigger size. In rv64, it tries to use PMD_SIZE, and tryies to use PGDIR_SIZE in rv32. To ensure that the start address of these sections could fit the mapping entry size, make them align to the biggest alignment. Define a macro SECTION_ALIGN because the HPAGE_SIZE or PMD_SIZE, etc., are invisible in linker script. This patch is prepared for STRICT_KERNEL_RWX support. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: move exception table immediately after RO_DATAZong Li1-2/+4
Move EXCEPTION_TABLE immediately after RO_DATA. Make it easy to set the attribution of the sections which should be read-only at a time. Add _data to specify the start of data section with write permission. This patch is prepared for STRICT_KERNEL_RWX support. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC supportZong Li2-0/+16
ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap pages for debugging purposes. Implement the __kernel_map_pages functions to fill the poison pattern. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add ARCH_HAS_SET_DIRECT_MAP supportZong Li3-0/+28
Add set_direct_map_*() functions for setting the direct map alias for the page to its default permissions and to an invalid state that cannot be cached in a TLB. (See d253ca0c ("x86/mm/cpa: Add set_direct_map_*() functions")) Add a similar implementation for RISC-V. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26riscv: add ARCH_HAS_SET_MEMORY supportZong Li4-1/+176
Add set_memory_ro/rw/x/nx architecture hooks to change the page attribution. Use own set_memory.h rather than generic set_memory.h (i.e. include/asm-generic/set_memory.h), because we want to add other function prototypes here. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada3-0/+3
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19riscv: fix the IPI missing issue in nommu modeGreentime Hu2-5/+5
This patch fixes the IPI(inner processor interrupt) missing issue. It failed because it used hartid_mask to iterate for_each_cpu(), however the cpu_mask and hartid_mask may not be always the same. It will never send the IPI to hartid 4 because it will be skipped in for_each_cpu loop in my case. We can reproduce this case in Qemu sifive_u machine by this command. qemu-system-riscv64 -nographic -smp 5 -m 1G -M sifive_u -kernel \ arch/riscv/boot/loader It will hang in csd_lock_wait(csd) because the csd_unlock(csd) is not called. It is not called because hartid 4 doesn't receive the IPI to release this lock. The caller hart doesn't send the IPI to hartid 4 is because of hartid 4 is skipped in for_each_cpu(). It will be skipped is because "(cpu) < nr_cpu_ids" is not true. The hartid is 4 and nr_cpu_ids is 4. Therefore it should use cpumask in for_each_cpu() instead of hartid_mask. /* Send a message to all CPUs in the map */ arch_send_call_function_ipi_mask(cfd->cpumask_ipi); if (wait) { for_each_cpu(cpu, cfd->cpumask) { call_single_data_t *csd; csd = per_cpu_ptr(cfd->csd, cpu); csd_lock_wait(csd); } } for ((cpu) = -1; \ (cpu) = cpumask_next((cpu), (mask)), \ (cpu) < nr_cpu_ids;) It could boot to login console after this patch applied. Fixes: b2d36b5668f6 ("riscv: provide native clint access for M-mode") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-19riscv: uaccess should be used in nommu modeGreentime Hu3-20/+19
It might have the unaligned access exception when trying to exchange data with user space program. In this case, it failed in tty_ioctl(). Therefore we should enable uaccess.S for NOMMU mode since the generic code doesn't handle the unaligned access cases. 0x8013a212 <tty_ioctl+462>: ld a5,460(s1) [ 0.115279] Oops - load address misaligned [#1] [ 0.115284] CPU: 0 PID: 29 Comm: sh Not tainted 5.4.0-rc5-00020-gb4c27160d562-dirty #36 [ 0.115294] epc: 000000008013a212 ra : 000000008013a212 sp : 000000008f48dd50 [ 0.115303] gp : 00000000801cac28 tp : 000000008fb80000 t0 : 00000000000000e8 [ 0.115312] t1 : 000000008f58f108 t2 : 0000000000000009 s0 : 000000008f48ddf0 [ 0.115321] s1 : 000000008f8c6220 a0 : 0000000000000001 a1 : 000000008f48dd28 [ 0.115330] a2 : 000000008fb80000 a3 : 00000000801a7398 a4 : 0000000000000000 [ 0.115339] a5 : 0000000000000000 a6 : 000000008f58f0c6 a7 : 000000000000001d [ 0.115348] s2 : 000000008f8c6308 s3 : 000000008f78b7c8 s4 : 000000008fb834c0 [ 0.115357] s5 : 0000000000005413 s6 : 0000000000000000 s7 : 000000008f58f2b0 [ 0.115366] s8 : 000000008f858008 s9 : 000000008f776818 s10: 000000008f776830 [ 0.115375] s11: 000000008fb840a8 t3 : 1999999999999999 t4 : 000000008f78704c [ 0.115384] t5 : 0000000000000005 t6 : 0000000000000002 [ 0.115391] status: 0000000200001880 badaddr: 000000008f8c63ec cause: 0000000000000004 [ 0.115401] ---[ end trace 00d490c6a8b6c9ac ]--- This failure could be fixed after this patch applied. [ 0.002282] Run /init as init process Initializing random number generator... [ 0.005573] random: dd: uninitialized urandom read (512 bytes read) done. Welcome to Buildroot buildroot login: root Password: Jan 1 00:00:00 login[62]: root login on 'ttySIF0' ~ # Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-16irqchip/sifive-plic: Enable/Disable external interrupts upon cpu online/offlineAtish Patra1-1/+1
Currently, PLIC threshold is only initialized once in the beginning. However, threshold can be set to disabled if a CPU is marked offline with CPU hotplug feature. This will not allow to change the irq affinity to a CPU that just came online. Add PLIC specific CPU hotplug callbacks and enable the threshold when a CPU comes online. Take this opportunity to move the external interrupt enable code from trap init to PLIC driver as well. On cpu offline path, the driver performs the exact opposite operations i.e. disable the interrupt and the threshold. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20200302231146.15530-2-atish.patra@wdc.com
2020-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller6-602/+2004
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-03-13 The following pull-request contains BPF updates for your *net-next* tree. We've added 86 non-merge commits during the last 12 day(s) which contain a total of 107 files changed, 5771 insertions(+), 1700 deletions(-). The main changes are: 1) Add modify_return attach type which allows to attach to a function via BPF trampoline and is run after the fentry and before the fexit programs and can pass a return code to the original caller, from KP Singh. 2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher objects to be visible in /proc/kallsyms so they can be annotated in stack traces, from Jiri Olsa. 3) Extend BPF sockmap to allow for UDP next to existing TCP support in order in order to enable this for BPF based socket dispatch, from Lorenz Bauer. 4) Introduce a new bpftool 'prog profile' command which attaches to existing BPF programs via fentry and fexit hooks and reads out hardware counters during that period, from Song Liu. Example usage: bpftool prog profile id 337 duration 3 cycles instructions llc_misses 4228 run_cnt 3403698 cycles (84.08%) 3525294 instructions # 1.04 insn per cycle (84.05%) 13 llc_misses # 3.69 LLC misses per million isns (83.50%) 5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition of a new bpf_link abstraction to keep in particular BPF tracing programs attached even when the applicaion owning them exits, from Andrii Nakryiko. 6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering and which returns the PID as seen by the init namespace, from Carlos Neira. 7) Refactor of RISC-V JIT code to move out common pieces and addition of a new RV32G BPF JIT compiler, from Luke Nelson. 8) Add gso_size context member to __sk_buff in order to be able to know whether a given skb is GSO or not, from Willem de Bruijn. 9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output implementation but can be called from tracepoint programs, from Eelco Chaudron. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06RISC-V: Move all address space definition macros to one placeAtish Patra1-37/+41
If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the following compilation error. --------------------------------------------------------------- ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’: ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared (first use in this function); did you mean ‘mem_map’? #define __pfn_to_page(pfn) (vmemmap + (pfn)) ^~~~~~~ ./include/asm-generic/memory_model.h:82:21: note: in expansion of macro ‘__pfn_to_page’ #define pfn_to_page __pfn_to_page ^~~~~~~~~~~~~ ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro ‘pfn_to_page’ return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT); --------------------------------------------------------------- Fix the compliation errors by moving all the address space definition macros before including pgtable-64.h. Fixes: 8ad8b72721d0 (riscv: Add KASAN support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-06riscv: fix seccomp reject syscall code pathTycho Andersen3-21/+8
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-06riscv: Use p*d_leaf macros to define p*d_hugeAlexandre Ghiti1-4/+2
The newly introduced p*d_leaf macros allow to check if an entry of the page table map to a physical page instead of the next level. To avoid duplication of code, use those macros to determine if a page table entry points to a hugepage. Suggested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel3-0/+4
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel3-0/+4
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel2-29/+2
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel1-0/+20
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv, bpf: Add RV32G eBPF JITLuke Nelson4-2/+1366
This is an eBPF JIT for RV32G, adapted from the JIT for RV64G and the 32-bit ARM JIT. There are two main changes required for this to work compared to the RV64 JIT. First, eBPF registers are 64-bit, while RV32G registers are 32-bit. BPF registers either map directly to 2 RISC-V registers, or reside in stack scratch space and are saved and restored when used. Second, many 64-bit ALU operations do not trivially map to 32-bit operations. Operations that move bits between high and low words, such as ADD, LSH, MUL, and others must emulate the 64-bit behavior in terms of 32-bit instructions. This patch also makes related changes to bpf_jit.h, such as adding RISC-V instructions required by the RV32 JIT. Supported features: The RV32 JIT supports the same features and instructions as the RV64 JIT, with the following exceptions: - ALU64 DIV/MOD: Requires loops to implement on 32-bit hardware. - BPF_XADD | BPF_DW: There's no 8-byte atomic instruction in RV32. These features are also unsupported on other BPF JITs for 32-bit architectures. Testing: - lib/test_bpf.c test_bpf: Summary: 378 PASSED, 0 FAILED, [349/366 JIT'ed] test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED The tests that are not JITed are all due to use of 64-bit div/mod or 64-bit xadd. - tools/testing/selftests/bpf/test_verifier.c Summary: 1415 PASSED, 122 SKIPPED, 43 FAILED Tested both with and without BPF JIT hardening. This is the same set of tests that pass using the BPF interpreter with the JIT disabled. Verification and synthesis: We developed the RV32 JIT using our automated verification tool, Serval. We have used Serval in the past to verify patches to the RV64 JIT. We also used Serval to superoptimize the resulting code through program synthesis. You can find the tool and a guide to the approach and results here: https://github.com/uw-unsat/serval-bpf/tree/rv32-jit-v5 Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Björn Töpel <bjorn.topel@gmail.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20200305050207.4159-3-luke.r.nels@gmail.com
2020-03-05riscv, bpf: Factor common RISC-V JIT codeLuke Nelson4-601/+639
This patch factors out code that can be used by both the RV64 and RV32 BPF JITs to a common bpf_jit.h and bpf_jit_core.c. Move struct definitions and macro-like functions to header. Rename rv_sb_insn/rv_uj_insn to rv_b_insn/rv_j_insn to match the RISC-V specification. Move reusable functions emit_body() and bpf_int_jit_compile() to bpf_jit_core.c with minor simplifications. Rename emit_insn() and build_{prologue,epilogue}() to be prefixed with "bpf_jit_" as they are no longer static. Rename bpf_jit_comp.c to bpf_jit_comp64.c to be more explicit. Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Björn Töpel <bjorn.topel@gmail.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20200305050207.4159-2-luke.r.nels@gmail.com
2020-03-05riscv: Fix range looking for kernel image memblockAlexandre Ghiti1-1/+1
When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal1-0/+1
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03RISC-V: Stop using LOCAL for the uaccess fixupsPalmer Dabbelt1-4/+2
LLVM's integrated assembler doesn't support the LOCAL directive, which we're using when generating our uaccess fixup tables. Luckily the table fragment is small enough that there's only one internal symbol, so using a relative symbol reference doesn't really complicate anything. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03RISC-V: Inline the assembly register save/restore macrosPalmer Dabbelt1-82/+61
These are only used once, and when reading the code I've always found them to be more of a headache than a benefit. While they were never worth removing before, LLVM's integrated assembler doesn't support LOCAL so rather that trying to figure out how to refactor the macros it seems saner to just inline them. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03RISC-V: Stop relying on GCC's register allocator's hueristicsPalmer Dabbelt3-7/+10
GCC allows users to hint to the register allocation that a variable should be placed in a register by using a syntax along the lines of function(...) { register long in_REG __asm__("REG"); } We've abused this a bit throughout the RISC-V port to access fixed registers directly as C variables. In practice it's never going to blow up because GCC isn't going to allocate these registers, but it's not a well defined syntax so we really shouldn't be relying upon this. Luckily there is a very similar but well defined syntax that allows us to still access these registers directly as C variables, which is to simply declare the register variables globally. For fixed variables this doesn't change the ABI. LLVM disallows this ambiguous syntax, so this isn't just strictly a formatting change. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03RISC-V: Stop putting .sbss in .sdataPalmer Dabbelt1-1/+0
I don't know why we were doing this, as it's been there since the beginning. After d841f729e655 ("riscv: force hart_lottery to put in .sdata section") my guess would be that it made the kernel boot and we forgot to fix it more cleanly. The default .bss segment already contains the .sbss section, so we don't need to do anything additional to ensure the symbols in .sbss continue to work. Tested-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 19:47:04 +0300