summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2022-02-11Merge tag 'riscv-for-linus-5.17-rc4' of ↵Linus Torvalds6-13/+23
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid undefined behavior when stack backtracing, which manifests in GCC as incorrect stack addresses - A few fixes for the XIP kernels - A fix to tracking NUMA state on CPU hotplug - Support for the recently relesaed binutils-2.38, which changed the default ISA version to one without CSRs or fence.i in 'I' extension * tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix build with binutils 2.38 riscv: cpu-hotplug: clear cpu from numa map when teardown riscv: extable: fix err reg writing in dedicated uaccess handler riscv/mm: Add XIP_FIXUP for riscv_pfn_base riscv/mm: Add XIP_FIXUP for phys_ram_base riscv: Fix XIP_FIXUP_FLASH_OFFSET riscv: eliminate unreliable __builtin_frame_address(1)
2022-02-10riscv: fix build with binutils 2.38Aurelien Jarno1-0/+6
From version 2.38, binutils default to ISA spec version 20191213. This means that the csr read/write (csrr*/csrw*) instructions and fence.i instruction has separated from the `I` extension, become two standalone extensions: Zicsr and Zifencei. As the kernel uses those instruction, this causes the following build failure: CC arch/riscv/kernel/vdso/vgettimeofday.o <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages: <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' The fix is to specify those extensions explicitely in -march. However as older binutils version do not support this, we first need to detect that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-10riscv: cpu-hotplug: clear cpu from numa map when teardownPingfan Liu1-0/+2
There is numa_add_cpu() when cpus online, accordingly, there should be numa_remove_cpu() when cpus offline. Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform") Cc: stable@vger.kernel.org [Palmer: Add missing NUMA include] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-09riscv: extable: fix err reg writing in dedicated uaccess handlerJisheng Zhang1-3/+3
Mayuresh reported commit 20802d8d477d ("riscv: extable: add a dedicated uaccess handler") breaks the writev02 test case in LTP. This is due to the err reg isn't correctly set with the errno(-EFAULT in writev02 case). First of all, the err and zero regs are reg numbers rather than reg offsets in struct pt_regs; Secondly, regs_set_gpr() should write the regs when offset isn't zero(zero means epc) Fix it by correcting regs_set_gpr() logic and passing the correct reg offset to it. Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com> Fixes: 20802d8d477d ("riscv: extable: add a dedicated uaccess handler") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-05Merge tag 'kvmarm-fixes-5.17-2' of ↵Paolo Bonzini78-796/+1877
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #2 - A couple of fixes when handling an exception while a SError has been delivered - Workaround for Cortex-A510's single-step[ erratum
2022-02-05riscv/mm: Add XIP_FIXUP for riscv_pfn_basePalmer Dabbelt1-0/+1
This manifests as a crash early in boot on VexRiscv. Signed-off-by: Myrtle Shah <gatecat@ds0.me> [Palmer: split commit] Fixes: 44c922572952 ("RISC-V: enable XIP") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-05riscv/mm: Add XIP_FIXUP for phys_ram_basePalmer Dabbelt1-0/+1
This manifests as a crash early in boot on VexRiscv. Signed-off-by: Myrtle Shah <gatecat@ds0.me> [Palmer: split commit] Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-04riscv: Fix XIP_FIXUP_FLASH_OFFSETMyrtle Shah1-6/+5
There were several problems with the calculation. Not only was an 'and' being computed into t1 but thrown away; but the 'and' itself would cause problems if the granularity of the XIP physical address was less than XIP_OFFSET - in my case I had the kernel image at 2MB in SPI flash. Fixes: f9ace4ede49b ("riscv: remove .text section size limitation for XIP") Cc: stable@vger.kernel.org Signed-off-by: Myrtle Shah <gatecat@ds0.me> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-04riscv: eliminate unreliable __builtin_frame_address(1)Changbin Du1-4/+5
I tried different pieces of code which uses __builtin_frame_address(1) (with both gcc version 7.5.0 and 10.3.0) to verify whether it works as expected on riscv64. The result is negative. What the compiler had generated is as below: 31 fp = (unsigned long)__builtin_frame_address(1); 0xffffffff80006024 <+200>: ld s1,0(s0) It takes '0(s0)' as the address of frame 1 (caller), but the actual address should be '-16(s0)'. | ... | <-+ +-----------------+ | | return address | | | previous fp | | | saved registers | | | local variables | | $fp --> | ... | | +-----------------+ | | return address | | | previous fp --------+ | saved registers | $sp --> | local variables | +-----------------+ This leads the kernel can not dump the full stack trace on riscv. [ 7.222126][ T1] Call Trace: [ 7.222804][ T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a This problem is not exposed on most riscv builds just because the '0(s0)' occasionally is the address frame 2 (caller's caller), if only ra and fp are stored in frame 1 (caller). | ... | <-+ +-----------------+ | | return address | | $fp --> | previous fp | | +-----------------+ | | return address | | | previous fp --------+ | saved registers | $sp --> | local variables | +-----------------+ This could be a *bug* of gcc that should be fixed. But as noted in gcc manual "Calling this function with a nonzero argument can have unpredictable effects, including crashing the calling program.", let's remove the '__builtin_frame_address(1)' in backtrace code. With this fix now it can show full stack trace: [ 10.444838][ T1] Call Trace: [ 10.446199][ T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a [ 10.447711][ T1] [<ffffffff800060ac>] show_stack+0x32/0x3e [ 10.448710][ T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a [ 10.449941][ T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c [ 10.450929][ T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a [ 10.451869][ T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78 [ 10.453049][ T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64 [ 10.455476][ T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be [ 10.456798][ T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30 [ 10.457853][ T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c ... Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-02RISC-V: KVM: Fix SBI implementation versionAnup Patel1-1/+2
The SBI implementation version returned by KVM RISC-V should be the Host Linux version code. Fixes: c62a76859723 ("RISC-V: KVM: Add SBI v0.2 base extension") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-02-02RISC-V: KVM: make CY, TM, and IR counters accessible in VU modeMayuresh Chitale1-0/+4
Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR. To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI). Fixes: a33c72faf2d73 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Cc: stable@vger.kernel.org Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-02-02kvm/riscv: rework guest entry logicMark Rutland1-17/+27
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_riscv_enter_exit_vcpu() helper which is marked noinstr. Fixes: 99cdc6c18c2d815e ("RISC-V: Add initial skeletal KVM support") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds1-1/+0
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22Merge tag 'riscv-for-linus-5.17-mw1' of ↵Linus Torvalds39-412/+980
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for sv48 paging - Hart ID mappings are now sparse, which enables more CPUs to come up on systems with sparse hart IDs - A handful of cleanups and fixes * tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits) RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT RISC-V: Remove redundant err variable riscv: dts: sifive unmatched: Add gpio poweroff riscv: canaan: remove useless select of non-existing config SYSCON RISC-V: Do not use cpumask data structure for hartid bitmap RISC-V: Move spinwait booting method to its own config RISC-V: Move the entire hart selection via lottery to SMP RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method RISC-V: Do not print the SBI version during HSM extension boot print RISC-V: Avoid using per cpu array for ordered booting riscv: default to CONFIG_RISCV_SBI_V01=n riscv: fix boolconv.cocci warnings riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping ...
2022-01-20RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULTPalmer Dabbelt1-1/+0
Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of eb52c0fc2331 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no longer necessary to set the second, which appears to never have had any effect for SLOB=y anyway. This was suggested by savedefconfig. Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Remove redundant err variableMinghao Chi1-3/+1
Return value from user_regset_copyin() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: dts: sifive unmatched: Add gpio poweroffRon Economos1-0/+5
Some of the GPIO pins on the Unmatched are wire up to control the power of the board, indicate that in the device tree. Signed-off-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Do not use cpumask data structure for hartid bitmapAtish Patra11-136/+130
Currently, SBI APIs accept a hartmask that is generated from struct cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it is not the correct data structure for hartids as it can be higher than NR_CPUs for platforms with sparse or discontguous hartids. Remove all association between hartid mask and struct cpumask. Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes) Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes) Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Move spinwait booting method to its own configAtish Patra5-5/+30
The spinwait booting method should only be used for platforms with older firmware without SBI HSM extension or M-mode firmware because spinwait method can't support cpu hotplug, kexec or sparse hartid. It is better to move the entire spinwait implementation to its own config which can be disabled if required. It is enabled by default to maintain backward compatibility and M-mode Linux. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Move the entire hart selection via lottery to SMPAtish Patra1-2/+6
The booting hart selection via lottery is only useful for SMP systems. Moreover, the lottery selection is only necessary for systems using spinwait booting method. It is better to keep the entire lottery selection together so that it can be disabled in future. Move the lottery selection code to under CONFIG_SMP. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Use __cpu_up_stack/task_pointer only for spinwait methodAtish Patra5-23/+30
The __cpu_up_stack/task_pointer array is only used for spinwait method now. The per cpu array based lookup is also fragile for platforms with discontiguous/sparse hartids. The spinwait method is only used for M-mode Linux or older firmwares without SBI HSM extension. For general Linux systems, ordered booting method is preferred anyways to support cpu hotplug and kexec. Make sure that __cpu_up_stack/task_pointer is only used for spinwait method. Take this opportunity to rename it to __cpu_spinwait_stack/task_pointer to emphasize the purpose as well. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Do not print the SBI version during HSM extension boot printAtish Patra1-1/+1
The HSM extension information log also prints the SBI version v0.2. This is misleading as the underlying firmware SBI version may be different from v0.2. Remove the unncessary printing of SBI version. Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Avoid using per cpu array for ordered bootingAtish Patra4-15/+58
Currently both order booting and spinwait approach uses a per cpu array to update stack & task pointer. This approach will not work for the following cases. 1. If NR_CPUs are configured to be less than highest hart id. 2. A platform has sparse hartid. This issue can be fixed for ordered booting as the booting cpu brings up one cpu at a time using SBI HSM extension which has opaque parameter that is unused until now. Introduce a common secondary boot data structure that can store the stack and task pointer. Secondary harts will use this data while booting up to setup the sp & tp. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: default to CONFIG_RISCV_SBI_V01=nHeinrich Schuchardt1-1/+0
The SBI 0.1 specification is obsolete. The current version is 0.3. Hence we should not rely by default on SBI 0.1 being implemented. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-8/+2
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ...
2022-01-20mm: percpu: generalize percpu related configKefeng Wang1-8/+2
Patch series "mm: percpu: Cleanup percpu first chunk function". When supporting page mapping percpu first chunk allocator on arm64, we found there are lots of duplicated codes in percpu embed/page first chunk allocator. This patchset is aimed to cleanup them and should no function change. The currently supported status about 'embed' and 'page' in Archs shows below, embed: NEED_PER_CPU_PAGE_FIRST_CHUNK page: NEED_PER_CPU_EMBED_FIRST_CHUNK embed page ------------------------ arm64 Y Y mips Y N powerpc Y Y riscv Y N sparc Y Y x86 Y Y ------------------------ There are two interfaces about percpu first chunk allocator, extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the pcpu_embed/page_first_chunk(). 1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be provided when archs supported NUMA. 2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too, a generic pcpu_populate_pte() which marked '__weak' is provided, if you need a different function to populate pte on the arch(like x86), please provide its own implementation. [1] https://github.com/kevin78/linux.git percpu-cleanup This patch (of 4): The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/ NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have duplicate definitions on platforms that subscribe it. Move them into mm, drop these redundant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-20riscv: fix boolconv.cocci warningskernel test robot1-2/+1
arch/riscv/mm/init.c:48:11-16: WARNING: conversion to bool not needed here Remove unneeded conversion to bool Semantic patch information: Relational and logical operators evaluate to bool, explicit conversion is overly verbose and unneeded. Generated by: scripts/coccinelle/misc/boolconv.cocci Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20RISC-V: Introduce sv48 support without relocatable kernelPalmer Dabbelt17-188/+705
This patchset allows to have a single kernel for sv39 and sv48 without being relocatable. The idea comes from Arnd Bergmann who suggested to do the same as x86, that is mapping the kernel to the end of the address space, which allows the kernel to be linked at the same address for both sv39 and sv48 and then does not require to be relocated at runtime. This implements sv48 support at runtime. The kernel will try to boot with 4-level page table and will fallback to 3-level if the HW does not support it. Folding the 4th level into a 3-level page table has almost no cost at runtime. Note that kasan region had to be moved to the end of the address space since its location must be known at compile-time and then be valid for both sv39 and sv48 (and sv57 that is coming). * riscv-sv48-v3: riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping riscv: Get rid of MAXPHYSMEM configs Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Explicit comment about user virtual address space sizeAlexandre Ghiti1-0/+9
Define precisely the size of the user accessible virtual space size for sv32/39/48 mmu types and explain why the whole virtual address space is split into 2 equal chunks between kernel and user space. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfoAlexandre Ghiti1-11/+12
Now that the mmu type is determined at runtime using SATP characteristic, use the global variable pgtable_l4_enabled to output mmu type of the processor through /proc/cpuinfo instead of relying on device tree infos. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Implement sv48 supportAlexandre Ghiti12-44/+512
By adding a new 4th level of page table, give the possibility to 64bit kernel to address 2^48 bytes of virtual address: in practice, that offers 128TB of virtual address space to userspace and allows up to 64TB of physical memory. If the underlying hardware does not support sv48, we will automatically fallback to a standard 3-level page table by folding the new PUD level into PGDIR level. In order to detect HW capabilities at runtime, we use SATP feature that ignores writes with an unsupported mode. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Allow to dynamically define VA_BITSAlexandre Ghiti4-14/+14
With 4-level page table folding at runtime, we don't know at compile time the size of the virtual address space so we must set VA_BITS dynamically so that sparsemem reserves the right amount of memory for struct pages. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Introduce functions to switch pt_opsAlexandre Ghiti1-23/+51
This simply gathers the different pt_ops initialization in functions where a comment was added to explain why the page table operations must be changed along the boot process. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Split early kasan mapping to prepare sv48 introductionAlexandre Ghiti3-51/+67
Now that kasan shadow region is next to the kernel, for sv48, this region won't be aligned on PGDIR_SIZE and then when populating this region, we'll need to get down to lower levels of the page table. So instead of reimplementing the page table walk for the early population, take advantage of the existing functions used for the final population. Note that kasan swapper initialization must also be split since memblock is not initialized at this point and as the last PGD is shared with the kernel, we'd need to allocate a PUD so postpone the kasan final population after the kernel population is done. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Move KASAN mapping next to the kernel mappingAlexandre Ghiti5-25/+32
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config, this value must remain constant whatever the size of the virtual address space, which is only possible by pushing this region at the end of the address space next to the kernel mapping. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-20riscv: Get rid of MAXPHYSMEM configsAlexandre Ghiti4-26/+2
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was preempted by !MMU case right before. In addition, the move of the kernel mapping at the end of the address space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET at the same address as the kernel mapping. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Conor Dooley <Conor.Dooley@microchip.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: bpf: Fix eBPF's exception tablesJisheng Zhang1-1/+1
eBPF's exception tables needs to be modified to relative synchronously. Suggested-by: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: 1f77ed9422cb ("riscv: switch to relative extable and other improvements") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: mm: init: try best to remove #ifdef CONFIG_XIP_KERNEL usageJisheng Zhang1-8/+3
Currently, the #ifdef CONFIG_XIP_KERNEL usage can be divided into the following three types: The first one is for functions/declarations only used in XIP case. The second one is for XIP_FIXUP case. Something as below: |foo_type foo; |#ifdef CONFIG_XIP_KERNEL |#define foo (*(foo_type *)XIP_FIXUP(&foo)) |#endif Usually, it's better to let the foo macro sit with the foo var together. But if various foos are defined adjacently, we can save some #ifdef CONFIG_XIP_KERNEL usage by grouping them together. The third one is for different implementations for XIP, usually, this is a #ifdef...#else...#endif case. This patch moves the pt_ops macro to adjacent #ifdef CONFIG_XIP_KERNEL and group first type usage cases into one. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: mm: init: try IS_ENABLED(CONFIG_XIP_KERNEL) instead of #ifdefJisheng Zhang1-9/+7
Try our best to replace the conditional compilation using "#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to simplify the code and to increase compile coverage. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: mm: init: remove _pt_ops and use pt_ops directlyJisheng Zhang1-4/+2
Except "pt_ops", other global vars when CONFIG_XIP_KERNEL=y is defined as below: |foo_type foo; |#ifdef CONFIG_XIP_KERNEL |#define foo (*(foo_type *)XIP_FIXUP(&foo)) |#endif Follow the same way for pt_ops to unify the style and to simplify code. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: mm: init: try best to use IS_ENABLED(CONFIG_64BIT) instead of #ifdefJisheng Zhang1-27/+16
Try our best to replace the conditional compilation using "#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to simplify the code and to increase compile coverage. Now we can also remove the __maybe_unused used in max_mapped_addr declaration. We also remove the BUG_ON check of mapping the last 4K bytes of the addressable memory since this is always true for every kernel actually. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: mm: init: remove unnecessary "#ifdef CONFIG_CRASH_DUMP"Jisheng Zhang1-2/+0
The is_kdump_kernel() returns false for !CRASH_DUMP case, so we don't need the #ifdef CONFIG_CRASH_DUMP for is_kdump_kernel() checking. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19Merge branch 'kvm-pi-raw-spinlock' into HEADPaolo Bonzini3-61/+54
Bring in fix for VT-d posted interrupts before further changing the code in 5.17. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19Merge tag 'riscv-for-linus-5.17-mw0' of ↵Linus Torvalds40-358/+493
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the DA9063 as used on the HiFive Unmatched. - Support for relative extables, which puts us in line with other architectures and save some space in vmlinux. - A handful of kexec fixes/improvements, including the ability to run crash kernels from PCI-addressable memory on the HiFive Unmatched. - Support for the SBI SRST extension, which allows systems that do not have an explicit driver in Linux to reboot. - A handful of fixes and cleanups, including to the defconfigs and device trees. * tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits) RISC-V: Use SBI SRST extension when available riscv: mm: fix wrong phys_ram_base value for RV64 RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign riscv: errata: alternative: mark vendor_patch_func __initdata riscv: head: make secondary_start_common() static riscv: remove cpu_stop() riscv: try to allocate crashkern region from 32bit addressible memory riscv: use hart id instead of cpu id on machine_kexec riscv: Don't use va_pa_offset on kdump riscv: dts: sifive: fu540-c000: Fix PLIC node riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values riscv: dts: sifive: Group tuples in register properties riscv: dts: sifive: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Fix clock controller node riscv: dts: microchip: mpfs: Fix reference clock node riscv: dts: microchip: mpfs: Fix PLIC node riscv: dts: microchip: mpfs: Drop empty chosen node riscv: dts: canaan: Group tuples in interrupt properties ...
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-17Merge branch 'signal-for-v5.17' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
2022-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds17-211/+690
Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ...
2022-01-15include: move find.h from asm_generic to linuxYury Norov1-1/+0
find_bit API and bitmap API are closely related, but inclusion paths are different - include/asm-generic and include/linux, correspondingly. In the past it made a lot of troubles due to circular dependencies and/or undefined symbols. Fix this by moving find.h under include/linux. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-01-15mm: remove redundant check about FAULT_FLAG_ALLOW_RETRY bitQi Zheng1-1/+1
Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times") allowed VM_FAULT_RETRY for multiple times, the FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page fault path, so the following check is no longer needed: flags & FAULT_FLAG_ALLOW_RETRY So just remove it. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Peter Xu <peterx@redhat.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 05:51:40 +0300