summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2018-11-02RISC-V: refresh defconfigAnup Patel1-8/+8
This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01Merge tag 'riscv-for-linus-4.20-mw2' of ↵Linus Torvalds3-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull more RISC-V updates from Palmer Dabbelt: "This contains the follow-on patches I'd like to target for the 4.20 merge window. I'm being somewhat conservative here, as while there are a few patches on the mailing list that were posted early in the merge window I'd like to let those bake for another round -- this was a fairly big release as far as RISC-V is concerened, and we need to walk before we can run. As far as the patches that made it go: - A patch to ignore offline CPUs when calculating AT_HWCAP. This should fix GDB on the HiFive unleashed, which has an embedded core for hart 0 which is exposed to Linux as an offline CPU. - A move of EM_RISCV to elf-em.h, which is where it should have been to begin with. - I've also removed the 64-bit divide routines. I know I'm not really playing by my own rules here because I posted the patches this morning, but since they shouldn't be in the kernel I think it's better to err on the side of going too fast here. I don't anticipate any more patch sets for the merge window" * tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Move EM_RISCV into elf-em.h RISC-V: properly determine hardware caps Revert "lib: Add umoddi3 and udivmoddi4 of GCC library routines" Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"
2018-10-31lib: Remove umoddi3 and udivmoddi4Palmer Dabbelt1-1/+0
These were only necessary for an out-of-tree driver that has since been fixed to use the proper divide routines. I've simply reverted the pair of commits we made last week. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31Move EM_RISCV into elf-em.hPalmer Dabbelt1-3/+0
This should never have been inside our arch port to begin with, it's just a relic from when we were maintaining out of tree patches. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31RISC-V: properly determine hardware capsAndreas Schwab1-3/+5
On the Hifive-U platform, cpu 0 is a masked cpu with less capabilities than the other cpus. Ignore it for the purpose of determining the hardware capabilities of the system. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"Palmer Dabbelt1-1/+0
I'm removing the generic 64-bit divide support, which means this will no longer work. This reverts commit 757331db921428295948fed5e7377a436e66d34e. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-2/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename free_all_bootmem to memblock_free_allMike Rapoport1-1/+1
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_HAVE_MEMBLOCKMike Rapoport1-1/+0
All architecures use memblock for early memory management. There is no need for the CONFIG_HAVE_MEMBLOCK configuration option. [rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs] Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx [rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal] Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx [rppt@linux.vnet.ibm.com: remove stale #else and the code it protects] Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_NO_BOOTMEMMike Rapoport1-1/+0
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any kernel configuration and therefore it can be removed. [alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init] Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31treewide: remove current_text_addrNick Desaulniers1-6/+0
Prefer _THIS_IP_ defined in linux/kernel.h. Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead. This patch removes the final call site of current_text_addr, making all of the definitions dead code. [akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h] Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'riscv-for-linus-4.20-mw0' of ↵Linus Torvalds27-238/+679
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This patch set contains a lot (at least, for me) of improvements to the RISC-V kernel port: - The removal of some cacheinfo values that were bogus. - On systems with F but without D the kernel will not show the F extension to userspace, as it isn't actually supported. - Support for futexes. - Removal of some unused code. - Cleanup of some menuconfig entries. - Support for systems without a floating-point unit, and for building kernels that will never use the floating-point unit. - More fixes to the RV32I port, which regressed again. It's really time to get this into a regression test somewhere so I stop breaking it. Thanks to Zong for resurrecting it again! - Various fixes that resulted from a year old review of our original patch set that I finally got around to. - Various improvements to SMP support, largely based around having switched to logical hart numbering, as well as some interrupt improvements. This one is in the same patch set as above, thanks to Atish for sheparding everything though as my patch set was a bit of a mess. I'm pretty sure this is our largest patch set since the original kernel contribution, and it's certainly the one with the most contributors. While I don't have anything else I know I'm going to submit for the merge window, I would be somewhat surprised if I didn't screw anything up. Thanks for the help, everyone!" * tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) RISC-V: Cosmetic menuconfig changes riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig RISC-V: remove the unused return_to_handler export RISC-V: Add futex support. RISC-V: Add FP register ptrace support for gdb. RISC-V: Mask out the F extension on systems without D RISC-V: Don't set cacheinfo.{physical_line_partition,attributes} RISC-V: Show IPI stats RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo RISC-V: Use Linux logical CPU number instead of hartid RISC-V: Add logical CPU indexing for RISC-V RISC-V: Use WRITE_ONCE instead of direct access RISC-V: Use mmgrab() RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid RISC-V: Provide a cleaner raw_smp_processor_id() RISC-V: Disable preemption before enabling interrupts RISC-V: Comment on the TLB flush in smp_callin() RISC-V: Filter ISA and MMU values in cpuinfo RISC-V: Don't set cacheinfo.{physical_line_partition,attributes} ...
2018-10-25Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping updates from Thomas Gleixner: "The timers and timekeeping departement provides: - Another large y2038 update with further preparations for providing the y2038 safe timespecs closer to the syscalls. - An overhaul of the SHCMT clocksource driver - SPDX license identifier updates - Small cleanups and fixes all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) tick/sched : Remove redundant cpu_online() check clocksource/drivers/dw_apb: Add reset control clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE clocksource/drivers: Unify the names to timer-* format clocksource/drivers/sh_cmt: Add R-Car gen3 support dt-bindings: timer: renesas: cmt: document R-Car gen3 support clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines clocksource/drivers/sh_cmt: Fixup for 64-bit machines clocksource/drivers/sh_tmu: Convert to SPDX identifiers clocksource/drivers/sh_mtu2: Convert to SPDX identifiers clocksource/drivers/sh_cmt: Convert to SPDX identifiers clocksource/drivers/renesas-ostm: Convert to SPDX identifiers clocksource: Convert to using %pOFn instead of device_node.name tick/broadcast: Remove redundant check RISC-V: Request newstat syscalls y2038: signal: Change rt_sigtimedwait to use __kernel_timespec y2038: socket: Change recvmmsg to use __kernel_timespec y2038: sched: Change sched_rr_get_interval to use __kernel_timespec y2038: utimes: Rework #ifdef guards for compat syscalls ...
2018-10-24Merge branch 'siginfo-linus' of ↵Linus Torvalds2-24/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-23RISC-V: SMP cleanup and new featuresPalmer Dabbelt10-62/+245
This patch series now has evolved to contain several related changes. 1. Updated the assorted cleanup series by Palmer. The original cleanup patch series can be found here. http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html 2. Implemented decoupling linux logical CPU ids from hart id. Some of the work has been inspired from ARM64. Tested on QEMU & HighFive Unleashed board with/without SMP enabled. 3. Included Anup's cleanup and IPI stat patch. All the patch series have been combined to avoid conflicts as a lot of common code is changed different patch sets. Atish has mostly addressed review comments and fixed checkpatch errors from Palmer's and Anup's series. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Fix some RV32 bugs and build failuresPalmer Dabbelt4-2/+7
This patch set fixes up various failures in the RV32I port. The fixes are all nominally independent, but are really only testable together because the RV32I port fails to build without all of them. The patch set includes: * The removal of tishift on RV32I targets, as 128-bit integers are not supported by the toolchain. * The removal of swiotlb from RV32I targets, since all physical addresses can be mapped by all hardware on all existing RV32I targets. * The addition of ummodi3 and udivmoddi4 from an old version of GCC that was licensed under GPLv2 as generic code, along with their use on RV32I targets. * A fix to our page alignment logic within ioremap for RV32I targets. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23riscv: Add support to no-FPU systemsPalmer Dabbelt9-127/+196
This patchset adds an option, CONFIG_FPU, to enable/disable floating- point support within the kernel. The kernel's new behavior will be as follows: * with CONFIG_FPU=y All FPU codes are reserved. If no FPU is found during booting, a global flag will be set, and those functions will be bypassed with condition check to that flag. * with CONFIG_FPU=n No floating-point instructions in kernel and all related settings are excluded. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Cosmetic menuconfig changesNick Kossifidis2-36/+39
* Move the built-in cmdline configuration on a new menu entry "Boot options", it doesn't make much sense to be part of the debuging menu. * Rename "Kernel Type" menu to "Kernel features" to be more consistent with what other architectures are using, plus "type" is a bit misleading here. Signed-off-by: Nick Kossifidis <mick@ics.forth.gr> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23riscv: move GCC version check for ARCH_SUPPORTS_INT128 to KconfigMasahiro Yamada2-2/+1
This becomes much neater in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: remove the unused return_to_handler exportChristoph Hellwig1-1/+0
This export is not only not needed, but also breaks symbol versioning due to being an undeclared assembly export. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Add futex support.Jim Wilson3-1/+129
Here is an attempt to add the missing futex support. I started with the MIPS version of futex.h and modified it until I got it working. I tested it on a HiFive Unleashed running Fedora Core 29 using the fc29 4.15 version of the kernel. This was tested against the glibc testsuite, where it fixes 14 nptl related testsuite failures. That unfortunately only tests the cmpxchg support, so I also used the testcase at the end of https://lwn.net/Articles/148830/ which tests the atomic_op functionality, except that it doesn't verify that the operations are atomic, which they obviously are. This testcase runs successfully with the patch and fails without it. I'm not a kernel expert, so there could be details I got wrong here. I wasn't sure about the memory model support, so I used aqrl which seemed safest, and didn't add fences which seemed unnecessary. I'm not sure about the copyright statements, I left in Ralf Baechle's line because I started with his code. Checkpatch reports some style problems, but it is the same style as the MIPS futex.h, and the uses of ENOSYS appear correct even though it complains about them. I don't know if any of that matters. This patch was tested on qemu with the glibc nptl/tst-cond-except testcase, and the wake_op testcase from above. Signed-off-by: Jim Wilson <jimw@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Add FP register ptrace support for gdb.Jim Wilson2-0/+55
Add a variable and a macro to describe FP registers, assuming only D is supported. FP code is conditional on CONFIG_FPU. The FP regs and FCSR are copied separately to avoid copying struct padding. Tested by hand and with the gdb testsuite. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Mask out the F extension on systems without DPalmer Dabbelt1-0/+7
The RISC-V Linux port doesn't support systems that have the F extension but don't have the D extension -- we actually don't support systems without D either, but Alan's patch set is rectifying that soon. For now I think we can leave this in a semi-broken state and just wait for Alan's patch set to get merged for proper non-FPU support -- the patch set is starting to look good, so doing something in-between doesn't seem like it's worth the work. I don't think it's worth fretting about support for systems with F but not D for now: our glibc ABIs are IMAC and IMAFDC so they probably won't end up being popular. We can always extend this in the future. CC: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}Palmer Dabbelt1-7/+0
These are just hard coded in the RISC-V port, which doesn't make any sense. We should probably be setting these from device tree entries when they exist, but for now I think it's saner to just leave them all as their default values. Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Show IPI statsAnup Patel3-7/+49
This patch provides arch_show_interrupts() implementation to show IPI stats via /proc/interrupts. Now the contents of /proc/interrupts" will look like below: CPU0 CPU1 CPU2 CPU3 8: 17 7 6 14 SiFive PLIC 8 virtio0 10: 10 10 9 11 SiFive PLIC 10 ttyS0 IPI0: 170 673 251 79 Rescheduling interrupts IPI1: 1 12 27 1 Function call interrupts Signed-off-by: Anup Patel <anup@brainfault.org> [Atish - Fixed checkpatch errors] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Changes since v2: - Remove use of IPI_CALL_WAKEUP because it's being removed Changes since v1: - Add stub inline show_ipi_stats() function for !CONFIG_SMP - Make ipi_names[] dynamically sized at compile time - Minor beautification of ipi_names[] using tabs Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfoAnup Patel1-4/+6
Currently, /proc/cpuinfo show logical CPU ID as Hart ID which is in-correct. This patch shows CPU ID and Hart ID separately in /proc/cpuinfo using cpuid_to_hardid_map(). With this patch, contents of /proc/cpuinfo looks as follows: processor : 0 hart : 1 isa : rv64imafdc mmu : sv48 processor : 1 hart : 0 isa : rv64imafdc mmu : sv48 processor : 2 hart : 2 isa : rv64imafdc mmu : sv48 processor : 3 hart : 3 isa : rv64imafdc mmu : sv48 Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Use Linux logical CPU number instead of hartidAtish Patra6-25/+58
Setup the cpu_logical_map during boot. Moreover, every SBI call and PLIC context are based on the physical hartid. Use the logical CPU to hartid mapping to pass correct hartid to respective functions. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Add logical CPU indexing for RISC-VAtish Patra3-1/+46
Currently, both Linux CPU id and hart id are same. This is not recommended as it will lead to discontinuous CPU indexing in Linux. Moreover, kdump kernel will run from CPU0 which would be absent if we follow existing scheme. Implement a logical mapping between Linux CPU id and hart id to decouple these two. Always mark the boot processor as CPU0 and all other CPUs get the logical CPU id based on their booting order. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Use WRITE_ONCE instead of direct accessAtish Patra1-2/+3
The secondary harts spin on couple of per cpu variables until both of these are non-zero so it's not necessary to have any ordering here. However, WRITE_ONCE should be used to avoid tearing. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Use mmgrab()Palmer Dabbelt1-1/+2
commit f1f1007644ff ("mm: add new mmgrab() helper") added a helper that we missed out on. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Rename im_okay_therefore_i_am to found_boot_cpuPalmer Dabbelt1-4/+5
The old name was a bit odd. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartidPalmer Dabbelt3-4/+7
It's a bit confusing exactly what this function does: it actually returns the hartid of an OF processor node, failing with -1 on invalid nodes. I've changed the name to _hartid() in order to make that a bit more clear, as well as adding a comment. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> [Atish: code comment formatting update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Provide a cleaner raw_smp_processor_id()Palmer Dabbelt1-10/+4
I'm not sure how I managed to miss this the first time, but this is much better. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> [Atish: code comment formatting and other fixes] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Disable preemption before enabling interruptsAtish Patra1-1/+5
Currently, irq is enabled before preemption disabling happens. If the scheduler fired right here and cpu is scheduled then it may blow up. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> [Atish: Commit text and code comment formatting update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Comment on the TLB flush in smp_callin()Palmer Dabbelt1-0/+4
This isn't readily apparent from reading the code. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> [Atish: code comment formatting update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Filter ISA and MMU values in cpuinfoPalmer Dabbelt1-7/+61
We shouldn't be directly passing device tree values to userspace, both because there could be mistakes in device trees and because the kernel doesn't support arbitrary ISAs. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> [Atish: checkpatch fix and code comment formatting update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}Palmer Dabbelt1-7/+0
These are just hard coded in the RISC-V port, which doesn't make any sense. We should probably be setting these from device tree entries when they exist, but for now I think it's saner to just leave them all as their default values. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: No need to pass scause as arg to do_IRQ()Anup Patel2-3/+2
The scause is already part of pt_regs so no need to pass scause as separate arg to do_IRQ(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Avoid corrupting the upper 32-bit of phys_addr_t in ioremapVincent Chen1-1/+1
For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero after AND with PAGE_MASK because the data type of PAGE_MASK is unsigned long. To fix this problem, the page alignment is done by subtracting the page offset instead of AND with PAGE_MASK. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Select GENERIC_LIB_UMODDI3 on RV32Zong Li1-0/+1
On 32-bit, it need to use __umoddi3 by some drivers. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Use swiotlb on RV64 onlyZong Li1-0/+3
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23RISC-V: Build tishift only on 64-bitZong Li1-1/+2
Only RV64 supports 128 integer size. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Auto-detect whether a FPU existsAlan Kao4-7/+19
We expect that a kernel with CONFIG_FPU=y can still support no-FPU machines. To do so, the kernel should first examine the existence of a FPU, then do nothing if a FPU does exist; otherwise, it should disable/bypass all FPU-related functions. In this patch, a new global variable, has_fpu, is created and determined when parsing the hardware capability from device tree during booting. This variable is used in those FPU-related functions. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Allow to disable FPU supportAlan Kao6-3/+29
FPU codes have been separated from common part in previous patches. This patch add the CONFIG_FPU option and some stubs, so that a no-FPU configuration is allowed. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Cleanup ISA string settingAlan Kao1-11/+8
This patch cleanup the MARCH string passing to both compiler and assembler. Note that the CFLAGS should not contain "fd" before we have mechnisms like kernel_fpu_begin/end in other architectures. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Refactor FPU code in signal setup/return proceduresAlan Kao1-27/+41
FPU-related logic is separated from normal signal handling path in this patch. Kernel can easily be configured to exclude those procedures for no-FPU systems. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Extract FPU context operations from entry.SAlan Kao3-87/+107
We move __fstate_save and __fstate_restore to a new source file, fpu.S. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-03signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZEEric W. Biederman2-24/+1
Rework the defintion of struct siginfo so that the array padding struct siginfo to SI_MAX_SIZE can be placed in a union along side of the rest of the struct siginfo members. The result is that we no longer need the __ARCH_SI_PREAMBLE_SIZE or SI_PAD_SIZE definitions. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-02RISCV: Fix end PFN for low memoryAtish Patra1-1/+1
Use memblock_end_of_DRAM which provides correct last low memory PFN. Without that, DMA32 region becomes empty resulting in zero pages being allocated for DMA32. This patch is based on earlier patch from palmer which never merged into 4.19. I just edited the commit text to make more sense. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-24RISC-V: include linux/ftrace.h in asm-prototypes.hJames Cowgill1-0/+7
Building a riscv kernel with CONFIG_FUNCTION_TRACER and CONFIG_MODVERSIONS enabled results in these two warnings: MODPOST vmlinux.o WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. When exporting symbols from an assembly file, the MODVERSIONS code requires their prototypes to be defined in asm-prototypes.h (see scripts/Makefile.build). Since both of these symbols have prototypes defined in linux/ftrace.h, include this header from RISC-V's asm-prototypes.h. Reported-by: Karsten Merker <merker@debian.org> Signed-off-by: James Cowgill <jcowgill@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 11:25:06 +0300