| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch series now has evolved to contain several related changes.
1. Updated the assorted cleanup series by Palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
3. Included Anup's cleanup and IPI stat patch.
All the patch series have been combined to avoid conflicts as a lot of
common code is changed different patch sets. Atish has mostly addressed
review comments and fixed checkpatch errors from Palmer's and Anup's
series.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.
Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.
This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
setup_initrd() overwrites initrd_start and initrd_end if __initramfs_size
is larger than 0, which is always true even if there is no embedded
initramfs. This prevents booting qemu with "-initrd" parameter.
Overwriting initrd_start and initrd_end is not necessary since
__initramfs_start and __initramfs_size are used directly in
populate_rootfs() to load the built-in initramfs, so just drop
that code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This code lives entirely within the RISC-V arch code. I've left it
within an "#ifdef CONFIG_EARLY_PRINTK" despite always having
EARLY_PRINTK support on RISC-V just in case someone wants to remove
it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
All RISC-V platforms today lack an IOMMU. However, legacy PCI devices
sometimes require DMA-memory to be in the low 32 bits. To make this work,
we enable the software-based bounce buffers from swiotlb. They only impose
overhead when the device in question cannot address the full 64-bit address
space, so a perfect fit.
This patch assumes that DMA is coherent with the processor and the PCI
bus. It also assumes that the processor and devices share a common
address space. This is true for all RISC-V platforms so far.
[changelog stolen from an earlier patch by Palmer Dabbelt that did the
more complicated swiotlb wireup before the recent consolidation]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The sbi_ prefix would seem to indicate an SBI interface, and save is not
very specific. After applying this patch, reading head.S makes more sense.
Signed-off-by: Michael Clark <michaeljclark@mac.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This patch allows devices that require memory that can be addressed
using 32-bit addresses to work easily on RISC-V systems. The newly
improved dma-direct ops will tap into this pool automatically for
32-bit addressing.
Based on an earlier patch from Wesley W. Terpstra.
CC: Wesley W. Terpstra <terpstra@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This is just some cruft left over from before the port converted to
device tree. The right way to handle memory regions is to specify them
in the device tree, which BBL (our simplest bootloader) is already
capable of doing. This patch simply removes the cruft.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
builtin_cmdline handling is present in drivers/of/fdt.c so the
duplicate logic in arch/riscv/setup.c results in duplication of
the builtin command line. e.g. CONFIG_CMDLINE="root=/dev/vda ro"
gets appended twice and gives "root=/dev/vda ro root=/dev/vda ro"
Before this patch:
[ 0.000000] Kernel command line: root=/dev/vda ro root=/dev/vda ro
After this patch:
[ 0.000000] Kernel command line: root=/dev/vda ro
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This is code that probably should never have made it into the kernel in
the first place: it depends on a driver that hadn't been reviewed yet.
During the HVC_SBI_RISCV review process a better way of doing this was
suggested, but that means this code is defunct. It's compile-time
disabled in 4.15 because the driver isn't in, so I think it's safe to
just remove this for now.
CC: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
These are the ones needed by current allmodconfig, so add them instead
of everything other architectures are exporting -- the rest can be
added on demand later if needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Needed by some modules (exported by other architectures).
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This contains the various __init C functions, the initial assembly
kernel entry point, and the code to reset the system. When a file was
init-related this patch contains the entire file.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
