summaryrefslogtreecommitdiff
path: root/arch/riscv/include
AgeCommit message (Collapse)AuthorFilesLines
2021-02-19RISC-V: Implement ASID allocatorAnup Patel3-0/+18
Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-19RISC-V: remove unneeded semicolonChengyang Fan1-1/+1
Remove a superfluous semicolon after function definition. Signed-off-by: Chengyang Fan <cy.fan@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWXSebastien Van Cauwenberghe1-3/+3
Allows the sections to be aligned on smaller boundaries and therefore results in a smaller kernel image size. Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03riscv: virt_addr_valid must check the address belongs to linear mappingAlexandre Ghiti1-1/+4
virt_addr_valid macro checks that a virtual address is valid, ie that the address belongs to the linear mapping and that the corresponding physical page exists. Add the missing check that ensures the virtual address belongs to the linear mapping, otherwise __virt_to_phys, when compiled with CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a kernel bug by syzbot. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add dump stack in show_regsKefeng Wang2-0/+3
Like commit 1149aad10b1e ("arm64: Add dump_backtrace() in show_regs"), dump the stack in riscv show_regs as common code expects. Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Enable per-task stack canariesGuo Ren1-1/+2
This enables the use of per-task stack canary values if GCC has support for emitting the stack canary reference relative to the value of tp, which holds the task struct pointer in the riscv kernel. After compare arm64 and x86 implementations, seems arm64's is more flexible and readable. The key point is how gcc get the offset of stack_canary from gs/el0_sp. x86: Use a fix offset from gs, not flexible. struct fixed_percpu_data { /* * GCC hardcodes the stack canary as %gs:40. Since the * irq_stack is the object at %gs:0, we reserve the bottom * 48 bytes of the irq stack for the canary. */ char gs_base[40]; // :( unsigned long stack_canary; }; arm64: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=xxx riscv: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=xxx GCC's implementation has been merged: commit c931e8d5a96463427040b0d11f9c4352ac22b2b0 Author: Cooper Qu <cooper.qu@linux.alibaba.com> Date: Mon Jul 13 16:15:08 2020 +0800 RISC-V: Add support for TLS stack protector canary access In the end, these codes are inserted by gcc before return: * 0xffffffe00020b396 <+120>: ld a5,1008(tp) # 0x3f0 * 0xffffffe00020b39a <+124>: xor a5,a5,a4 * 0xffffffe00020b39c <+126>: mv a0,s5 * 0xffffffe00020b39e <+128>: bnez a5,0xffffffe00020b61c <_do_fork+766> 0xffffffe00020b3a2 <+132>: ld ra,136(sp) 0xffffffe00020b3a4 <+134>: ld s0,128(sp) 0xffffffe00020b3a6 <+136>: ld s1,120(sp) 0xffffffe00020b3a8 <+138>: ld s2,112(sp) 0xffffffe00020b3aa <+140>: ld s3,104(sp) 0xffffffe00020b3ac <+142>: ld s4,96(sp) 0xffffffe00020b3ae <+144>: ld s5,88(sp) 0xffffffe00020b3b0 <+146>: ld s6,80(sp) 0xffffffe00020b3b2 <+148>: ld s7,72(sp) 0xffffffe00020b3b4 <+150>: addi sp,sp,144 0xffffffe00020b3b6 <+152>: ret ... * 0xffffffe00020b61c <+766>: auipc ra,0x7f8 * 0xffffffe00020b620 <+770>: jalr -1764(ra) # 0xffffffe000a02f38 <__stack_chk_fail> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Cooper Qu <cooper.qu@linux.alibaba.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add support for function error injectionGuo Ren1-0/+6
Inspired by the commit 42d038c4fb00 ("arm64: Add support for function error injection"), this patch supports function error injection for riscv. This patch mainly support two functions: one is regs_set_return_value() which is used to overwrite the return value; the another function is override_function_with_return() which is to override the probed function returning and jump to its caller. Test log: cd /sys/kernel/debug/fail_function echo sys_clone > inject echo 100 > probability echo 1 > interval ls / [ 313.176875] FAULT_INJECTION: forcing a failure. [ 313.176875] name fail_function, interval 1, probability 100, space 0, times 1 [ 313.184357] CPU: 0 PID: 87 Comm: sh Not tainted 5.8.0-rc5-00007-g6a758cc #117 [ 313.187616] Call Trace: [ 313.189100] [<ffffffe0002036b6>] walk_stackframe+0x0/0xc2 [ 313.191626] [<ffffffe00020395c>] show_stack+0x40/0x4c [ 313.193927] [<ffffffe000556c60>] dump_stack+0x7c/0x96 [ 313.194795] [<ffffffe0005522e8>] should_fail+0x140/0x142 [ 313.195923] [<ffffffe000299ffc>] fei_kprobe_handler+0x2c/0x5a [ 313.197687] [<ffffffe0009e2ec4>] kprobe_breakpoint_handler+0xb4/0x18a [ 313.200054] [<ffffffe00020357e>] do_trap_break+0x36/0xca [ 313.202147] [<ffffffe000201bca>] ret_from_exception+0x0/0xc [ 313.204556] [<ffffffe000201bbc>] ret_from_syscall+0x0/0x2 -sh: can't fork: Invalid argument Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add uprobes supportedGuo Ren3-1/+44
This patch adds support for uprobes on riscv architecture. Just like kprobe, it support single-step and simulate instructions. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add kprobes supportedGuo Ren2-0/+64
This patch enables "kprobe & kretprobe" to work with ftrace interface. It utilized software breakpoint as single-step mechanism. Some instructions which can't be single-step executed must be simulated in kernel execution slot, such as: branch, jal, auipc, la ... Some instructions should be rejected for probing and we use a blacklist to filter, such as: ecall, ebreak, ... We use ebreak & c.ebreak to replace origin instruction and the kprobe handler prepares an executable memory slot for out-of-line execution with a copy of the original instruction being probed. In execution slot we add ebreak behind original instruction to simulate a single-setp mechanism. The patch is based on packi's work [1] and csky's work [2]. - The kprobes_trampoline.S is all from packi's patch - The single-step mechanism is new designed for riscv without hw single-step trap - The simulation codes are from csky - Frankly, all codes refer to other archs' implementation [1] https://lore.kernel.org/linux-riscv/20181113195804.22825-1-me@packi.ch/ [2] https://lore.kernel.org/linux-csky/20200403044150.20562-9-guoren@kernel.org/ Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Co-developed-by: Patrick Stählin <me@packi.ch> Signed-off-by: Patrick Stählin <me@packi.ch> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Patrick Stählin <me@packi.ch> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15RISC-V: Implement ptrace regs and stack APIPatrick Stählin1-0/+29
Needed for kprobes support. Copied and adapted from arm64 code. Guo Ren fixup pt_regs type for linux-5.8-rc1. Signed-off-by: Patrick Stählin <me@packi.ch> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Reviewed-by: Zong Li <zong.li@sifive.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add numa support for riscv64 platformAtish Patra3-0/+35
Use the generic numa implementation to add NUMA support for RISC-V. This is based on Greentime's patch[1] but modified to use generic NUMA implementation and few more fixes. [1] https://lkml.org/lkml/2020/1/10/233 Co-developed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Add support pte_protnone and pmd_protnone if CONFIG_NUMA_BALANCINGGreentime Hu1-0/+20
These two functions are used to distinguish between PROT_NONENUMA protections and hinting fault protections. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Separate memory init from paging initAtish Patra1-0/+1
Currently, we perform some memory init functions in paging init. But, that will be an issue for NUMA support where DT needs to be flattened before numa initialization and memblock_present can only be called after numa initialization. Move memory initialization related functions to a separate function. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-13riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALLGuo Ren1-1/+1
The patch fix commit: ad5d112 ("riscv: use vDSO common flow to reduce the latency of the time-related functions"). The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL or vgettimeofday won't work. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-10riscv: Drop a duplicated PAGE_KERNEL_EXECKefeng Wang1-1/+0
commit b91540d52a08 ("RISC-V: Add EFI runtime services") add a duplicated PAGE_KERNEL_EXEC, kill it. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08riscv: Fix builtin DTB handlingDamien Le Moal1-38/+0
All SiPeed K210 MAIX boards have the exact same vendor, arch and implementation IDs, preventing differentiation to select the correct device tree to use through the SOC_BUILTIN_DTB_DECLARE() macro. This result in this macro to be useless and mandates changing the code of the sysctl driver to change the builtin device tree suitable for the target board. Fix this problem by removing the SOC_BUILTIN_DTB_DECLARE() macro since it is used only for the K210 support. The code searching the builtin DTBs using the vendor, arch an implementation IDs is also removed. Support for builtin DTB falls back to the simpler and more traditional handling of builtin DTB using the CONFIG_BUILTIN_DTB option, similarly to other architectures. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08riscv: Cleanup sbi function stubs when RISCV_SBI disabledKefeng Wang1-7/+3
Fix sbi_init() function declaration mismatch between RISCV_SBI enable and disable, as it always returned 0, make it void function. Drop some stubs which won't be used if RISCV_SBI disabled. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-30local64.h: make <asm/local64.h> mandatoryRandy Dunlap1-1/+0
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-18Merge tag 'riscv-for-linus-5.11-mw0' of ↵Linus Torvalds4-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "We have a handful of new kernel features for 5.11: - Support for the contiguous memory allocator. - Support for IRQ Time Accounting - Support for stack tracing - Support for strict /dev/mem - Support for kernel section protection I'm being a bit conservative on the cutoff for this round due to the timing, so this is all the new development I'm going to take for this cycle (even if some of it probably normally would have been OK). There are, however, some fixes on the list that I will likely be sending along either later this week or early next week. There is one issue in here: one of my test configurations (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the .text.init alignment patch. With any luck we'll sort out the issue, but given how many bugs get fixed all over the place and how unrelated those features seem my guess is that we're just running into something that's been lurking for a while and has already been fixed in the newer QEMU (though I wouldn't be surprised if it's one of these implicit assumptions we have in the boot flow). If it was hardware I'd be strongly inclined to look more closely, but given that users can upgrade their simulators I'm less worried about it" * tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() riscv: Fixed kernel test robot warning riscv: kernel: Drop unused clean rule riscv: provide memmove implementation RISC-V: Move dynamic relocation section under __init RISC-V: Protect all kernel sections including init early RISC-V: Align the .init.text section RISC-V: Initialize SBI early riscv: Enable ARCH_STACKWALK riscv: Make stack walk callback consistent with generic code riscv: Cleanup stacktrace riscv: Add HAVE_IRQ_TIME_ACCOUNTING riscv: Enable CMA support riscv: Ignore Image.* and loader.bin riscv: Clean up boot dir riscv: Fix compressed Image formats build RISC-V: Add kernel image sections to the resource tree
2020-12-16Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+4
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe: "This sits on top of of the core entry/exit and x86 entry branch from the tip tree, which contains the generic and x86 parts of this work. Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL. With that done, we can get rid of JOBCTL_TASK_WORK from task_work and signal.c, and also remove a deadlock work-around in io_uring around knowing that signal based task_work waking is invoked with the sighand wait queue head lock. The motivation for this work is to decouple signal notify based task_work, of which io_uring is a heavy user of, from sighand. The sighand lock becomes a huge contention point, particularly for threaded workloads where it's shared between threads. Even outside of threaded applications it's slower than it needs to be. Roman Gershman <romger@amazon.com> reported that his networked workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all spent hammering on the sighand lock, showing 57% of the CPU time there [1]. There are further cleanups possible on top of this. One example is TIF_PATCH_PENDING, where a patch already exists to use TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more consolidation, but the work stands on its own as well" [1] https://github.com/axboe/liburing/issues/215 * tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits) io_uring: remove 'twa_signal_ok' deadlock work-around kernel: remove checking for TIF_NOTIFY_SIGNAL signal: kill JOBCTL_TASK_WORK io_uring: JOBCTL_TASK_WORK is no longer used by task_work task_work: remove legacy TWA_SIGNAL path sparc: add support for TIF_NOTIFY_SIGNAL riscv: add support for TIF_NOTIFY_SIGNAL nds32: add support for TIF_NOTIFY_SIGNAL ia64: add support for TIF_NOTIFY_SIGNAL h8300: add support for TIF_NOTIFY_SIGNAL c6x: add support for TIF_NOTIFY_SIGNAL alpha: add support for TIF_NOTIFY_SIGNAL xtensa: add support for TIF_NOTIFY_SIGNAL arm: add support for TIF_NOTIFY_SIGNAL microblaze: add support for TIF_NOTIFY_SIGNAL hexagon: add support for TIF_NOTIFY_SIGNAL csky: add support for TIF_NOTIFY_SIGNAL openrisc: add support for TIF_NOTIFY_SIGNAL sh: add support for TIF_NOTIFY_SIGNAL um: add support for TIF_NOTIFY_SIGNAL ...
2020-12-16Merge tag 'seccomp-v5.11-rc1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The major change here is finally gaining seccomp constant-action bitmaps, which internally reduces the seccomp overhead for many real-world syscall filters to O(1), as discussed at Plumbers this year. - Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook) - Fix bogus __user annotations (Jann Horn) - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)" * tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Update kernel config seccomp: Remove bogus __user annotations seccomp/cache: Report cache data through /proc/pid/seccomp_cache xtensa: Enable seccomp architecture tracking sh: Enable seccomp architecture tracking s390: Enable seccomp architecture tracking riscv: Enable seccomp architecture tracking powerpc: Enable seccomp architecture tracking parisc: Enable seccomp architecture tracking csky: Enable seccomp architecture tracking arm: Enable seccomp architecture tracking arm64: Enable seccomp architecture tracking selftests/seccomp: Compare bitmap vs filter overhead x86: Enable seccomp architecture tracking seccomp/cache: Add "emulator" to check if filter is constant allow seccomp/cache: Lookup syscall allowlist bitmap for fast path
2020-12-16Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds1-20/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-12-15arch, mm: make kernel_page_present() always availableMike Rapoport1-0/+1
For architectures that enable ARCH_HAS_SET_MEMORY having the ability to verify that a page is mapped in the kernel direct map can be useful regardless of hibernation. Add RISC-V implementation of kernel_page_present(), update its forward declarations and stubs to be a part of set_memory API and remove ugly ifdefery in inlcude/linux/mm.h around current declarations of kernel_page_present(). Link: https://lkml.kernel.org/r/20201109192128.960-5-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Len Brown <len.brown@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15arch, mm: restore dependency of __kernel_map_pages() on DEBUG_PAGEALLOCMike Rapoport1-2/+0
The design of DEBUG_PAGEALLOC presumes that __kernel_map_pages() must never fail. With this assumption is wouldn't be safe to allow general usage of this function. Moreover, some architectures that implement __kernel_map_pages() have this function guarded by #ifdef DEBUG_PAGEALLOC and some refuse to map/unmap pages when page allocation debugging is disabled at runtime. As all the users of __kernel_map_pages() were converted to use debug_pagealloc_map_pages() it is safe to make it available only when DEBUG_PAGEALLOC is set. Link: https://lkml.kernel.org/r/20201109192128.960-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Len Brown <len.brown@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-12Merge tag 'riscv-for-linus-5.10-rc8' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "Just one fix. It's nothing critical, just a randconfig that wasn't building. That said, it does seem pretty safe and is technically a regression so I'm sending it along for 5.10: - define get_cycles64() all the time, as it's used by most configurations" * tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Define get_cycles64() regardless of M-mode
2020-12-12riscv: add support for TIF_NOTIFY_SIGNALJens Axboe1-1/+4
Wire up TIF_NOTIFY_SIGNAL handling for riscv. Cc: linux-riscv@lists.infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-11RISC-V: Define get_cycles64() regardless of M-modePalmer Dabbelt1-2/+2
The timer driver uses get_cycles64() unconditionally to obtain the current time. A recent refactoring lost the common definition for some configs, which is now the only one we need. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-11riscv: provide memmove implementationNylon Chen1-4/+4
The memmove used by the kernel feature like KASAN. Signed-off-by: Nick Hu <nickhu@andestech.com> Signed-off-by: Nick Hu <nick650823@gmail.com> Signed-off-by: Nylon Chen <nylon7@andestech.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-09efi: stub: get rid of efi_get_max_fdt_addr()Ard Biesheuvel1-6/+0
Now that ARM started following the example of arm64 and RISC-V, and no longer imposes any restrictions on the placement of the FDT in memory at boot, we no longer need per-arch implementations of efi_get_max_fdt_addr() to factor out the differences. So get rid of it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
2020-11-29Merge tag 'riscv-for-linus-5.10-rc6' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "I've collected a handful of fixes over the past few weeks: - A fix to un-break the build-id argument to the vDSO build, which is necessary for the LLVM linker. - A fix to initialize the jump label subsystem, without which it (and all the stuff that uses it) doesn't actually function. - A fix to include <asm/barrier.h> from <vdso/processor.h>, without which some drivers won't compile" * tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: fix barrier() use in <vdso/processor.h> RISC-V: Add missing jump label initialization riscv: Explicitly specify the build id style in vDSO Makefile again
2020-11-26RISC-V: Protect all kernel sections including init earlyAtish Patra2-0/+6
Currently, .init.text & .init.data are intermixed which makes it impossible apply different permissions to them. .init.data shouldn't need exec permissions while .init.text shouldn't have write permission. Moreover, the strict permission are only enforced /init starts. This leaves the kernel vulnerable from possible buggy built-in modules. Keep .init.text & .data in separate sections so that different permissions are applied to each section. Apply permissions to individual sections as early as possible. This improves the kernel protection under CONFIG_STRICT_KERNEL_RWX. We also need to restore the permissions for the entire _init section after it is freed so that those pages can be used for other purpose. Signed-off-by: Atish Patra <atish.patra@wdc.com> Tested-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-25RISC-V: fix barrier() use in <vdso/processor.h>Randy Dunlap1-0/+2
riscv's <vdso/processor.h> uses barrier() so it should include <asm/barrier.h> Fixes this build error: CC [M] drivers/net/ethernet/emulex/benet/be_main.o In file included from ./include/vdso/processor.h:10, from ./arch/riscv/include/asm/processor.h:11, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: ./arch/riscv/include/asm/vdso/processor.h: In function 'cpu_relax': ./arch/riscv/include/asm/vdso/processor.h:14:2: error: implicit declaration of function 'barrier' [-Werror=implicit-function-declaration] 14 | barrier(); This happens with a total of 5 networking drivers -- they all use <linux/prefetch.h>. rv64 allmodconfig now builds cleanly after this patch. Fixes fallout from: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-21riscv: Make stack walk callback consistent with generic codeKefeng Wang1-1/+1
In order to use generic arch_stack_walk() code, make stack walk callback consistent with it. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-21riscv: Cleanup stacktraceKefeng Wang1-0/+17
1. add asm/stacktrace.h for walk_stackframe and struct stackframe 2. remove unnecessary blank lines in stacktrace.c 3. fix warning "no previous prototype for ‘fill_callchain’" Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-20riscv: Enable seccomp architecture trackingYiFei Zhu1-0/+10
To enable seccomp constant action bitmaps, we need to have a static mapping to the audit architecture and system call table size. Add these for riscv. Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/58ef925d00505cbb77478fa6bd2b48ab2d902460.1605101222.git.yifeifz2@illinois.edu
2020-11-16arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann1-0/+2
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-06riscv: uaccess: fix __put_kernel_nofault()Changbin Du1-1/+1
The copy_from_kernel_nofault() is broken on riscv because the 'dst' and 'src' are mistakenly reversed in __put_kernel_nofault() macro. copy_to_kernel_nofault: ... 0xffffffe0003159b8 <+30>: sd a4,0(a1) # a1 aka 'src' Fixes: d464118cdc ("riscv: implement __get_kernel_nofault and __put_user_nofault") Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-27riscv: use asm-generic/mmu_context.h for no-op implementationsNicholas Piggin1-20/+2
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches1-2/+2
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'riscv-for-linus-5.10-mw1' of ↵Linus Torvalds2-92/+91
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "Just a single patch set: the remainder of Christoph's work to remove set_fs, including the RISC-V portion" * tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove address space overrides using set_fs() riscv: implement __get_kernel_nofault and __put_user_nofault riscv: refactor __get_user and __put_user riscv: use memcpy based uaccess for nommu again asm-generic: make the set_fs implementation optional asm-generic: add nommu implementations of __{get,put}_kernel_nofault asm-generic: improve the nommu {get,put}_user handling uaccess: provide a generic TASK_SIZE_MAX definition
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-20Merge tag 'riscv-for-linus-5.10-mw0' of ↵Linus Torvalds10-3/+132
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of cleanups and new features: - A handful of cleanups for our page fault handling - Improvements to how we fill out cacheinfo - Support for EFI-based systems" * tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) RISC-V: Add page table dump support for uefi RISC-V: Add EFI runtime services RISC-V: Add EFI stub support. RISC-V: Add PE/COFF header for EFI stub RISC-V: Implement late mapping page table allocation functions RISC-V: Add early ioremap support RISC-V: Move DT mapping outof fixmap RISC-V: Fix duplicate included thread_info.h riscv/mm/fault: Set FAULT_FLAG_INSTRUCTION flag in do_page_fault() riscv/mm/fault: Fix inline placement in vmalloc_fault() declaration riscv: Add cache information in AUX vector riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO riscv: Set more data to cacheinfo riscv/mm/fault: Move access error check to function riscv/mm/fault: Move FAULT_FLAG_WRITE handling in do_page_fault() riscv/mm/fault: Simplify mm_fault_error() riscv/mm/fault: Move fault error handling to mm_fault_error() riscv/mm/fault: Simplify fault error handling riscv/mm/fault: Move vmalloc fault handling to vmalloc_fault() riscv/mm/fault: Move bad area handling to bad_area() ...
2020-10-04riscv: remove address space overrides using set_fs()Christoph Hellwig2-32/+1
Stop providing the possibility to override the address space using set_fs() now that there is no need for that any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-04riscv: implement __get_kernel_nofault and __put_user_nofaultChristoph Hellwig1-0/+20
Implement the non-faulting kernel access helpers directly instead of abusing the uaccess routines under set_fs(KERNEL_DS). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-04riscv: refactor __get_user and __put_userChristoph Hellwig1-42/+52
Add new __get_user_nocheck and __put_user_nocheck that switch on the size and call the actual inline assembly helpers, and move the uaccess enable / disable into the actual __get_user and __put_user. This prepares for natively implementing __get_kernel_nofault and __put_kernel_nofault. Also don't bother with the deprecated register keyword for the error return. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-04riscv: use memcpy based uaccess for nommu againChristoph Hellwig1-18/+18
This reverts commit adccfb1a805ea84d2db38eb53032533279bdaa97. Now that the generic uaccess by mempcy code handles unaligned addresses the generic code can be used for all RISC-V CPUs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-03RISC-V: Add EFI runtime servicesAtish Patra3-0/+26
This patch adds EFI runtime service support for RISC-V. Signed-off-by: Atish Patra <atish.patra@wdc.com> [ardb: - Remove the page check] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-03RISC-V: Add EFI stub support.Atish Patra1-0/+35
Add a RISC-V architecture specific stub code that actually copies the actual kernel image to a valid address and jump to it after boot services are terminated. Enable UEFI related kernel configs as well for RISC-V. Signed-off-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com [ardb: - move hartid fetch into check_platform_features() - use image_size not reserve_size - select ISA_C - do not use dram_base] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-03RISC-V: Add PE/COFF header for EFI stubAtish Patra1-0/+13
Linux kernel Image can appear as an EFI application With appropriate PE/COFF header fields in the beginning of the Image header. An EFI application loader can directly load a Linux kernel Image and an EFI stub residing in kernel can boot Linux kernel directly. Add the necessary PE/COFF header. Signed-off-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20200421033336.9663-3-atish.patra@wdc.com [ardb: - use C prefix for c.li to ensure the expected opcode is emitted - align all image sections according to PE/COFF section alignment ] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 14:39:19 +0300