summaryrefslogtreecommitdiff
path: root/arch/riscv/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2021-02-23riscv: Update Canaan Kendryte K210 device treeDamien Le Moal3-51/+413
Update the Canaan Kendryte K210 base device tree k210.dtsi to define all supported peripherals of the SoC, their clocks and reset lines. The device tree file k210.dts is renamed to k210_generic.dts and becomes the default value selection of the configuration option SOC_CANAAN_K210_DTB_BUILTIN_SOURCE. No device beside the serial console is defined by this device tree. This makes this generic device tree suitable for use with a builtin initramfs with all known K210 based boards. These changes result in the K210_CLK_ACLK clock ID to be unused and removed from the dt-bindings k210-clk.h header file. Most updates to the k210.dtsi file come from Sean Anderson's work on U-Boot support for the K210. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-11Revert "dts: phy: add GPIO number and active state used for phy reset"Palmer Dabbelt1-1/+0
VSC8541 phys need a special reset sequence, which the driver doesn't currentlny support. As a result enabling the reset via GPIO essentially guarnteees that the device won't work correctly. We've been relying on bootloaders to reset the device for years, with this revert we'll go back to doing so until we can sort out how to get the reset sequence into the kernel. This reverts commit a0fa9d727043da2238432471e85de0bdb8a8df65. Fixes: a0fa9d727043 ("dts: phy: add GPIO number and active state used for phy reset") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Fix Canaan Kendryte K210 device treeDamien Le Moal1-5/+0
Remove the clocks property from the cpu and clint nodes as these are ignored. Also remove the clock-frequency property from the cpu nodes as riscv relies on the timebase-frequency property. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Use vendor name for K210 SoC supportDamien Le Moal5-6/+6
Rename configuration options and directories related to the Kendryte K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte" branding name. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-14dts: phy: add GPIO number and active state used for phy resetSagar Shrikant Kadam1-0/+1
The GEMGXL_RST line on HiFive Unleashed is pulled low and is using GPIO number 12. Add these reset-gpio details to dt-node using which the linux phylib can reset the phy. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-14dts: phy: fix missing mdio device and probe failure of vsc8541-01 deviceSagar Shrikant Kadam1-0/+1
HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is identified as a Revision B device as described in device identification registers. In order to use this phy in the unmanaged mode, it requires a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin as documented here [1]. Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset. If due to some reason the phy device hasn't received the reset by the prior stages before the linux macb driver comes into the picture, the MACB mii bus gets probed but the mdio scan fails and is not even able to read the phy ID registers. It gives an error message: "libphy: MACB_mii_bus: probed mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing." Thus adding the device OUI (Organizationally Unique Identifier) to the phy device node helps to probe the phy device. [1]: VSC8541-01 datasheet: https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08riscv: Fix builtin DTB handlingDamien Le Moal2-3/+4
All SiPeed K210 MAIX boards have the exact same vendor, arch and implementation IDs, preventing differentiation to select the correct device tree to use through the SOC_BUILTIN_DTB_DECLARE() macro. This result in this macro to be useless and mandates changing the code of the sysctl driver to change the builtin device tree suitable for the target board. Fix this problem by removing the SOC_BUILTIN_DTB_DECLARE() macro since it is used only for the K210 support. The code searching the builtin DTBs using the vendor, arch an implementation IDs is also removed. Support for builtin DTB falls back to the simpler and more traditional handling of builtin DTB using the CONFIG_BUILTIN_DTB option, similarly to other architectures. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08riscv: dts: add initial board data for the SiFive HiFive UnmatchedYash Shah2-1/+255
Add initial board data for the SiFive HiFive Unmatched A00. This patch is dependent on Zong's Patchset[0]. [0]: https://lore.kernel.org/linux-riscv/20201130082330.77268-4-zong.li@sifive.com/T/#u Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08riscv: dts: add initial support for the SiFive FU740-C000 SoCYash Shah1-0/+293
Add initial support for the SiFive FU540-C000 SoC. FU740-C000 is built around the SiFIve U7 Core Complex and a TileLink interconnect. This file is expected to grow as more device drivers are added to the kernel. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-19riscv: Fix Kendryte K210 device treeDamien Le Moal1-2/+4
The Kendryte K210 SoC CLINT is compatible with Sifive clint v0 (sifive,clint0). Fix the Kendryte K210 device tree clint entry to be inline with the sifive timer definition documented in Documentation/devicetree/bindings/timer/sifive,clint.yaml. The device tree clint entry is renamed similarly to u-boot device tree definition to improve compatibility with u-boot defined device tree. To ensure correct initialization, the interrup-cells attribute is added and the interrupt-extended attribute definition fixed. This fixes boot failures with Kendryte K210 SoC boards. Note that the clock referenced is kept as K210_CLK_ACLK, which does not necessarilly match the clint MTIME increment rate. This however does not seem to cause any problem for now. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-18riscv: K210: Add a built-in device treePalmer Dabbelt2-1/+5
The K210's bootloader does not provide a device tree. Give the ability to providea builtin one with the SOC_KENDRYTE_K210_BUILTIN_DTB option. If selected, this option result in the definition of a builtin DTB entry in the k210 sysctl driver. If defined, the builtin DTB entry points to the default k210.dts device tree file and is keyed with the vendor ID 0x4B5, the arch ID 0xE59889E6A5A04149 ("Canaan AI" in UTF-8 coded Chinese) and the impl ID 0x4D41495832303030 ("MAIX200"). These values are reported by the SiPEED MAIXDUINO board, the SiPEED MAIX Go board and the SiPEED Dan Dock board. [Thanks to Damien for the K210 IDs] Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds4-0/+149
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-04-03riscv: Add Kendryte K210 device treeDamien Le Moal4-0/+149
Add a generic device tree for Kendryte K210 SoC based boards. This is for now a very simple device tree describing the core elements of the SoC. This is suitable (and tested) for the Kendryte KD233 development board, the Sipeed MAIX M1 Dan Dock board and the Sipeed MAIXDUINO board. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-29riscv: dts: Add DT support for SiFive FU540 GPIO driverYash Shah2-1/+18
Add the gpio DT node in SiFive FU540 soc-specific DT file. Enable the gpio node in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-03riscv: dts: Add DT support for SiFive L2 cache controllerYash Shah1-0/+15
Add the L2 cache controller DT node in SiFive FU540 soc-specific DT file Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-15riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00Green Wan1-0/+7
Add PDMA support to (arch/riscv/boot/dts/sifive/fu540-c000.dtsi) Signed-off-by: Green Wan <green.wan@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-14riscv: dts: HiFive Unleashed: add default chosen/stdout-pathPaul Walmsley1-0/+1
Add a default "stdout-path" to the kernel DTS file, as is present in many of the board DTS files elsewhere in the kernel tree. With this line present, earlyconsole can be enabled by simply passing "earlycon" on the kernel command line. No specific device details are necessary, since the kernel will use the stdout-path as the default. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2019-09-20riscv: dts: sifive: Drop "clock-frequency" property of cpu nodesBin Meng1-3/+0
The "clock-frequency" property of cpu nodes isn't required. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-20riscv: dts: sifive: Add ethernet0 to the aliases nodeBin Meng1-0/+1
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19riscv: dts: Add DT support for SiFive FU540 PWM driverYash Shah2-0/+26
Add the PWM DT node in SiFive FU540 soc-specific DT file. Enable the PWM nodes in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: added chip-specific compatible string; dropped reg-names string from pwm1] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-31riscv: dts: fu540-c000: drop "timebase-frequency"Paul Walmsley1-1/+0
On FU540-based systems, the "timebase-frequency" (RTCCLK) is sourced from an external crystal located on the PCB. Thus the timebase-frequency DT property should be defined by the board that uses the SoC, not the SoC itself. Drop the superfluous timebase-frequency property from the SoC DT data. (It's already present in the board DT data.) Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-23riscv: dts: Add DT node for SiFive FU540 Ethernet controller driverYash Shah2-0/+24
DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Cc: Andrew Lunn <andrew@lunn.ch> [paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's suggestion] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-01arch: riscv: add config option for building SiFive's SoC resourceLoys Ollivier1-1/+1
Create a config option for building SiFive SoC specific resources e.g. SiFive device tree, platform drivers... Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26riscv: dts: Re-organize the DT nodesYash Shah2-0/+19
As per the convention for any SOC device with external connection, define only device DT node in SOC DTSi file with status = "disabled" and enable device in Board DTS file with status = "okay" Reported-by: Anup Patel <anup@brainfault.org> Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-17riscv: dts: add initial board data for the SiFive HiFive UnleashedPaul Walmsley2-0/+67
Add initial board data for the SiFive HiFive Unleashed A00. Currently the data populated in this DT file describes the board DRAM configuration and the external clock sources that supply the PRCI. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Loys Ollivier <lollivier@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org
2019-06-17riscv: dts: add initial support for the SiFive FU540-C000 SoCPaul Walmsley1-0/+215
Add initial support for the SiFive FU540-C000 SoC. This is a 28nm SoC based around the SiFive U54-MC core complex and a TileLink interconnect. This file is expected to grow as more device drivers are added to the kernel. This patch includes a fix to the QSPI memory map due to a documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds entries for the I2C controller, and merges all DT changes that formerly were made dynamically by the riscv-pk BBL proxy kernel. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Loys Ollivier <lollivier@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: ShihPo Hung <shihpo.hung@sifive.com> Cc: devicetree@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org
2019-06-17arch: riscv: add support for building DTB files from DT source dataPaul Walmsley1-0/+2
Similar to ARM64, add support for building DTB files from DT source data for RISC-V boards. This patch starts with the infrastructure needed for SiFive boards. Boards from other vendors would add support here in a similar form. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Loys Ollivier <lollivier@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 17:29:03 +0300