summaryrefslogtreecommitdiff
path: root/arch/riscv/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-03-16riscv: fix build with binutils 2.38Aurelien Jarno1-0/+6
From version 2.38, binutils default to ISA spec version 20191213. This means that the csr read/write (csrr*/csrw*) instructions and fence.i instruction has separated from the `I` extension, become two standalone extensions: Zicsr and Zifencei. As the kernel uses those instruction, this causes the following build failure: CC arch/riscv/kernel/vdso/vgettimeofday.o <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages: <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' The fix is to specify those extensions explicitely in -march. However as older binutils version do not support this, we first need to detect that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-09-11riscv: move the (z)install rules to arch/riscv/MakefileMasahiro Yamada1-2/+5
Currently, the (z)install targets in arch/riscv/Makefile descend into arch/riscv/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/riscv/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-05Merge tag 'riscv-for-linus-5.15-mw0' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - support PC-relative instructions (auipc and branches) in kprobes - support for forced IRQ threading - support for the hlt/nohlt kernel command line options, via the generic idle loop - show the edge/level triggered behavior of interrupts in /proc/interrupts - a handful of cleanups to our address mapping mechanisms - support for allocating gigantic hugepages via CMA - support for the undefined behavior sanitizer (UBSAN) - a handful of cleanups to the VDSO that allow the kernel to build with LLD. - support for hugepage migration * tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) riscv: add support for hugepage migration RISC-V: Fix VDSO build for !MMU riscv: use strscpy to replace strlcpy riscv: explicitly use symbol offsets for VDSO riscv: Enable Undefined Behavior Sanitizer UBSAN riscv: Keep the riscv Kconfig selects sorted riscv: Support allocating gigantic hugepages using CMA riscv: fix the global name pfn_base confliction error riscv: Move early fdt mapping creation in its own function riscv: Simplify BUILTIN_DTB device tree mapping handling riscv: Use __maybe_unused instead of #ifdefs around variable declarations riscv: Get rid of map_size parameter to create_kernel_page_table riscv: Introduce va_kernel_pa_offset for 32-bit kernel riscv: Optimize kernel virtual address conversion macro dt-bindings: riscv: add starfive jh7100 bindings riscv: Enable GENERIC_IRQ_SHOW_LEVEL riscv: Enable idle generic idle loop riscv: Allow forced irq threading riscv: Implement thread_struct whitelist for hardened usercopy riscv: kprobes: implement the branch instructions ...
2021-08-26RISC-V: Fix VDSO build for !MMUPalmer Dabbelt1-0/+2
We don't have a VDSO for the !MMU configurations, so don't try to build one. Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25riscv: explicitly use symbol offsets for VDSOSaleem Abdulrasool1-0/+4
The current implementation of the `__rt_sigaction` reference computed an absolute offset relative to the mapped base of the VDSO. While this can be handled in the medlow model, the medany model cannot handle this as it is meant to be position independent. The current implementation relied on the BFD linker relaxing the PC-relative relocation into an absolute relocation as it was a near-zero address allowing it to be referenced relative to `zero`. We now extract the offsets and create a generated header allowing the build with LLVM and lld to succeed as we no longer depend on the linker rewriting address references near zero. This change was largely modelled after the ARM64 target which does something similar. Signed-off-by: Saleem Abdulrasool <abdulras@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-10kbuild: check CONFIG_AS_IS_LLVM instead of LLVM_IASMasahiro Yamada1-1/+1
LLVM_IAS is the user interface to set the -(no-)integrated-as flag, and it should be used only for that purpose. LLVM_IAS is checked in some places to determine the assembler type, but it is not precise. For example, $ make CC=gcc LLVM_IAS=1 ... will use the GNU assembler (i.e. binutils) since LLVM_IAS=1 is effective only when $(CC) is clang. Of course, 'CC=gcc LLVM_IAS=1' is an odd combination, but the build system can be more robust against such insane input. Commit ba64beb17493a ("kbuild: check the minimum assembler version in Kconfig") introduced CONFIG_AS_IS_GNU/LLVM, which is more precise because Kconfig checks the version string from the assembler in use. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2021-07-10Merge tag 'kbuild-v5.14' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Increase the -falign-functions alignment for the debug option. - Remove ugly libelf checks from the top Makefile. - Make the silent build (-s) more silent. - Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified. - Various script cleanups * tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits) scripts: add generic syscallnr.sh scripts: check duplicated syscall number in syscall table sparc: syscalls: use pattern rules to generate syscall headers parisc: syscalls: use pattern rules to generate syscall headers nds32: add arch/nds32/boot/.gitignore kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set kbuild: modpost: Explicitly warn about unprototyped symbols kbuild: remove trailing slashes from $(KBUILD_EXTMOD) kconfig.h: explain IS_MODULE(), IS_ENABLED() kconfig: constify long_opts scripts/setlocalversion: simplify the short version part scripts/setlocalversion: factor out 12-chars hash construction scripts/setlocalversion: add more comments to -dirty flag detection scripts/setlocalversion: remove workaround for old make-kpkg scripts/setlocalversion: remove mercurial, svn and git-svn supports kbuild: clean up ${quiet} checks in shell scripts kbuild: sink stdout from cmd for silent build init: use $(call cmd,) for generating include/generated/compile.h kbuild: merge scripts/mkmakefile to top Makefile sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild ...
2021-06-13riscv32: Use medany C model for modulesKhem Raj1-1/+1
When CONFIG_CMODEL_MEDLOW is used it ends up generating riscv_hi20_rela relocations in modules which are not resolved during runtime and following errors would be seen [ 4.802714] virtio_input: target 00000000c1539090 can not be addressed by the 32-bit offset from PC = 39148b7b [ 4.854800] virtio_input: target 00000000c1539090 can not be addressed by the 32-bit offset from PC = 9774456d Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-29riscv: Use -mno-relax when using lld linkerKhem Raj1-0/+9
lld does not implement the RISCV relaxation optimizations like GNU ld therefore disable it when building with lld, Also pass it to assembler when using external GNU assembler ( LLVM_IAS != 1 ), this ensures that relevant assembler option is also enabled along. if these options are not used then we see following relocations in objects 0000000000000000 R_RISCV_ALIGN *ABS*+0x0000000000000002 These are then rejected by lld ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN requires unimplemented linker relaxation; recompile with -mno-relax but the .o is already compiled with -mno-relax Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26kbuild: require all architectures to have arch/$(SRCARCH)/KbuildMasahiro Yamada1-1/+0
arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can use the obj-y syntax. Add an empty file if it is missing in arch/$(SRCARCH)/. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-26RISC-V: enable XIPVitaly Wool1-1/+7
Introduce XIP (eXecute In Place) support for RISC-V platforms. It allows code to be executed directly from non-volatile storage directly addressable by the CPU, such as QSPI NOR flash which can be found on many RISC-V platforms. This makes way for significant optimization of RAM footprint. The XIP kernel is not compressed since it has to run directly from flash, so it will occupy more space on the non-volatile storage. The physical flash address used to link the kernel object files and for storing it has to be known at compile time and is represented by a Kconfig option. XIP on RISC-V will for the time being only work on MMU-enabled kernels. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> [Alex: Rebase on top of "Move kernel mapping outside the linear mapping" ] Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> [Palmer: disable XIP for allyesconfig] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-26riscv: Introduce alternative mechanism to apply errata solutionVincent Chen1-0/+1
Introduce the "alternative" mechanism from ARM64 and x86 to apply the CPU vendors' errata solution at runtime. The main purpose of this patch is to provide a framework. Therefore, the implementation is quite basic for now so that some scenarios could not use this schemei, such as patching code to a module, relocating the patching code and heterogeneous CPU topology. Users could use the macro ALTERNATIVE to apply an errata to the existing code flow. In the macro ALTERNATIVE, users need to specify the manufacturer information(vendorid, archid, and impid) for this errata. Therefore, kernel will know this errata is suitable for which CPU core. During the booting procedure, kernel will select the errata required by the CPU core and then patch it. It means that the kernel only applies the errata to the specified CPU core. In this case, the vendor's errata does not affect each other at runtime. The above patching procedure only occurs during the booting phase, so we only take the overhead of the "alternative" mechanism once. This "alternative" mechanism is enabled by default to ensure that all required errata will be applied. However, users can disable this feature by the Kconfig "CONFIG_RISCV_ERRATA_ALTERNATIVE". Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Enable per-task stack canariesGuo Ren1-0/+10
This enables the use of per-task stack canary values if GCC has support for emitting the stack canary reference relative to the value of tp, which holds the task struct pointer in the riscv kernel. After compare arm64 and x86 implementations, seems arm64's is more flexible and readable. The key point is how gcc get the offset of stack_canary from gs/el0_sp. x86: Use a fix offset from gs, not flexible. struct fixed_percpu_data { /* * GCC hardcodes the stack canary as %gs:40. Since the * irq_stack is the object at %gs:0, we reserve the bottom * 48 bytes of the irq stack for the canary. */ char gs_base[40]; // :( unsigned long stack_canary; }; arm64: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=xxx riscv: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=xxx GCC's implementation has been merged: commit c931e8d5a96463427040b0d11f9c4352ac22b2b0 Author: Cooper Qu <cooper.qu@linux.alibaba.com> Date: Mon Jul 13 16:15:08 2020 +0800 RISC-V: Add support for TLS stack protector canary access In the end, these codes are inserted by gcc before return: * 0xffffffe00020b396 <+120>: ld a5,1008(tp) # 0x3f0 * 0xffffffe00020b39a <+124>: xor a5,a5,a4 * 0xffffffe00020b39c <+126>: mv a0,s5 * 0xffffffe00020b39e <+128>: bnez a5,0xffffffe00020b61c <_do_fork+766> 0xffffffe00020b3a2 <+132>: ld ra,136(sp) 0xffffffe00020b3a4 <+134>: ld s0,128(sp) 0xffffffe00020b3a6 <+136>: ld s1,120(sp) 0xffffffe00020b3a8 <+138>: ld s2,112(sp) 0xffffffe00020b3aa <+140>: ld s3,104(sp) 0xffffffe00020b3ac <+142>: ld s4,96(sp) 0xffffffe00020b3ae <+144>: ld s5,88(sp) 0xffffffe00020b3b0 <+146>: ld s6,80(sp) 0xffffffe00020b3b2 <+148>: ld s7,72(sp) 0xffffffe00020b3b4 <+150>: addi sp,sp,144 0xffffffe00020b3b6 <+152>: ret ... * 0xffffffe00020b61c <+766>: auipc ra,0x7f8 * 0xffffffe00020b620 <+770>: jalr -1764(ra) # 0xffffffe000a02f38 <__stack_chk_fail> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Cooper Qu <cooper.qu@linux.alibaba.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNTGuo Ren1-0/+2
This patch changes the current detour mechanism of dynamic ftrace which has been discussed during LPC 2020 RISCV-MC [1]. Before the patch, we used mcount for detour: <funca>: addi sp,sp,-16 sd ra,8(sp) sd s0,0(sp) addi s0,sp,16 mv a5,ra mv a0,a5 auipc ra,0x0 -> nop jalr -296(ra) <_mcount@plt> ->nop ... After the patch, we use nop call site area for detour: <funca>: nop -> REG_S ra, -SZREG(sp) nop -> auipc ra, 0x? nop -> jalr ?(ra) nop -> REG_L ra, -SZREG(sp) ... The mcount mechanism is mixed with gcc function prologue which is not very clear. The patchable function entry just put 16 bytes nop before the front of the function prologue which could be filled with a separated detour mechanism. [1] https://www.linuxplumbersconf.org/event/7/contributions/807/ Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15riscv: Use vendor name for K210 SoC supportDamien Le Moal1-1/+1
Rename configuration options and directories related to the Kendryte K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte" branding name. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-09riscv: Clean up boot dirKefeng Wang1-0/+3
Let's remove all files under riscv boot dir by using archclean rule. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-09riscv: Fix compressed Image formats buildKefeng Wang1-0/+3
make[1]: *** No rule to make target `Image.lzma'. Stop. When make ARCH=riscv Image.lzma, it won't work, let's fix it. Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-03RISC-V: Add EFI stub support.Atish Patra1-0/+1
Add a RISC-V architecture specific stub code that actually copies the actual kernel image to a valid address and jump to it after boot services are terminated. Enable UEFI related kernel configs as well for RISC-V. Signed-off-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com [ardb: - move hartid fetch into check_platform_features() - use image_size not reserve_size - select ISA_C - do not use dram_base] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-24kbuild: preprocess module linker scriptMasahiro Yamada1-3/+0
There was a request to preprocess the module linker script like we do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512) The difference between vmlinux.lds and module.lds is that the latter is needed for external module builds, thus must be cleaned up by 'make mrproper' instead of 'make clean'. Also, it must be created by 'make modules_prepare'. You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by 'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to arch/$(SRCARCH)/include/asm/module.lds.h, which is included from scripts/module.lds.S. scripts/module.lds is fine because 'make clean' keeps all the build artifacts under scripts/. You can add arch-specific sections in <asm/module.lds.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org>
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-04-03riscv: create a loader.bin boot image for Kendryte SoCChristoph Hellwig1-3/+3
Create the loader.bin bootable image file that can be loaded into Kendryte K210 based boards using the kflash.py tool with the command: kflash.py/kflash.py -t arch/riscv/boot/loader.bin Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen1-2/+4
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-18riscv: provide a flat image loaderChristoph Hellwig1-4/+9
This allows just loading the kernel at a pre-set address without qemu going bonkers trying to map the ELF file. Contains a contribution from Aurabindo Jayamohanan to reuse the PAGE_OFFSET definition. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: fixed checkpatch issue; minor commit message fix] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-04riscv: Add perf callchain supportMao Han1-0/+3
This patch add support for perf callchain sampling on riscv platforms. The return address of leaf function is retrieved from pt_regs as it is not saved in the outmost frame. Signed-off-by: Mao Han <han_mao@c-sky.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: linux-riscv <linux-riscv@lists.infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Guo Ren <guoren@kernel.org> Tested-by: Greentime Hu <greentime.hu@sifive.com> [paul.walmsley@sifive.com: fixed some 'checkpatch.pl --strict' issues; fixed patch description spelling] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-31riscv: add arch/riscv/KbuildMasahiro Yamada1-1/+1
Use the standard obj-y form to specify the sub-directories under arch/riscv/. No functional change intended. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-21kbuild: rebuild modules when module linker scripts are updatedMasahiro Yamada1-1/+1
Currently, the timestamp of module linker scripts are not checked. Add them to the dependency of modules so they are correctly rebuilt. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17riscv: drop unneeded -Wall additionMasahiro Yamada1-2/+0
The top level Makefile adds -Wall globally: KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ For riscv, I see two "-Wall" added for compiling each object. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-09kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIGMasahiro Yamada1-2/+0
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile, the default path arch/*/defconfig was used. The last users of the default are gone by the following commits: - Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to arch/s390/configs/defconfig") - Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig") Let's set arch/*/configs/defconfig as a new default. This saves KBUILD_DEFCONFIG for some architectures. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-04-26riscv: remove CONFIG_RISCV_ISA_AChristoph Hellwig1-3/+2
This option is always enabled, and not supporting the A extensions would create a complete ABI trainwreck, so there is no point in even slightly encouraging such an idea by keeping this unselectable code around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-05bpf, riscv: add BPF JIT for RV64GBjörn Töpel1-1/+1
This commit adds a BPF JIT for RV64G. The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64). At the moment the RISC-V Linux port does not support CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes. The implementation does not support "far branching" (>4KiB). Test results: # modprobe test_bpf test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed] # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier ... Summary: 761 PASSED, 507 SKIPPED, 2 FAILED Note that "test_verifier" was run with one build with CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise many of the the tests that require unaligned access were skipped. CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 0 No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS: # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled # ./test_verifier | grep -c 'NOTE.*unknown align' 59 The two failing test_verifier tests are: "ld_abs: vlan + abs, test 1" "ld_abs: jump around ld_abs" This is due to that "far branching" involved in those tests. All tests where done on QEMU (QEMU emulator version 3.1.50 (v3.1.0-688-g8ae951fbc106)). Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-20RISC-V: Build flat and compressed kernel imagesAnup Patel1-1/+14
This patch extends Linux RISC-V build system to build and install: Image - Flat uncompressed kernel image Image.gz - Flat and GZip compressed kernel image Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command. The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-13riscv: add missing vdso_install targetDavid Abdurachmanov1-0/+4
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23riscv: Add support to no-FPU systemsPalmer Dabbelt1-11/+8
This patchset adds an option, CONFIG_FPU, to enable/disable floating- point support within the kernel. The kernel's new behavior will be as follows: * with CONFIG_FPU=y All FPU codes are reserved. If no FPU is found during booting, a global flag will be set, and those functions will be bypassed with condition check to that flag. * with CONFIG_FPU=n No floating-point instructions in kernel and all related settings are excluded. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23riscv: move GCC version check for ARCH_SUPPORTS_INT128 to KconfigMasahiro Yamada1-2/+0
This becomes much neater in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Allow to disable FPU supportAlan Kao1-1/+1
FPU codes have been separated from common part in previous patches. This patch add the CONFIG_FPU option and some stubs, so that a no-FPU configuration is allowed. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-23Cleanup ISA string settingAlan Kao1-11/+8
This patch cleanup the MARCH string passing to both compiler and assembler. Note that the CFLAGS should not contain "fd" before we have mechnisms like kernel_fpu_begin/end in other architectures. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Nick Hu <nickhu@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-2/+2
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-19Merge tag 'riscv-for-linus-4.19-mw0' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some major improvements to the RISC-V port, including the necessary interrupt controller and timer support to actually make it to userspace. Support for three devices has been added: - the ISA-mandated timers on RISC-V systems. - the ISA-mandated first-level interrupt controller on RISC-V systems, which is handled as part of our core arch code because it's very small and tightly tied to the ISA. - SiFive's platform-level interrupt controller, which talks to the actual devices. In addition to these new devices, there are a handful of cleanups all over the RISC-V tree: - build fixes for various configurations: * A fix to the vDSO build's makefile so it respects CFLAGS. * The addition of __lshrti3, a libgcc derived function necessary for some 32-bit configurations. * !SMP && PERF_EVENTS - Cleanups to the arch code to remove the remnants of old versions of the drivers that were just properly submitted. * Some dead code from the timer driver, most of which wasn't ever even compiled. * Cleanups of some interrupt #defines, which are now local to the interrupt handling code. - Fixes to ptrace(), which while not being sufficient to fully make GDB work are at least sufficient to get simple GDB tasks to work. - Early printk support via RISC-V's architecturally mandated SBI console device. - A fix to our early debug trap handler to ensure it's always aligned. These patches have all been through a fairly extensive review process, but as this enables a whole pile of functionality (ie, userspace) I'm confident we'll need to submit a few more patches. The only concrete issues I know about are the sys_riscv_flush_icache patches, but as I managed to screw those up on Friday I figured it'd be best to let them bake another week. This tag boots a Fedora root filesystem on QEMU's master branch for me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on the HiFive Unleashed. Thanks to Christoph Hellwig and the other guys at WD for getting the new drivers in shape!" * tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller dt-bindings: interrupt-controller: RISC-V local interrupt controller RISC-V: Fix !CONFIG_SMP compilation error irqchip: add a SiFive PLIC driver RISC-V: Add the directive for alignment of stvec's value clocksource: new RISC-V SBI timer driver RISC-V: implement low-level interrupt handling RISC-V: add a definition for the SIE SEIE bit RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h RISC-V: simplify software interrupt / IPI code RISC-V: remove timer leftovers RISC-V: Add early printk support via the SBI console RISC-V: Don't increment sepc after breakpoint. RISC-V: implement __lshrti3. RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
2018-08-13RISC-V: implement __lshrti3.Alex Guo1-0/+3
Signed-off-by: Alex Guo <xfguo@jlsemi.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-19kbuild: remove redundant LDFLAGS clearing in arch/*/MakefileMasahiro Yamada1-1/+0
Since commit ce99d0bf312d ("kbuild: clear LDFLAGS in the top Makefile"), the top-level Makefile caters to this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2018-06-11riscv: add riscv-specific predefines to CHECKFLAGSLuc Van Oostenryck1-0/+3
RISC-V uses the macro __riscv_xlen, predefined by GCC, to make the distinction between 32 or 64 bit code. However, sparse doesn't know anything about this macro which lead to wrong warnings and failures. Fix this by adding a define of __riscv_xlen to CHECKFLAGS and add one for __riscv too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-03RISC-V: Fixes to module loadingPalmer Dabbelt1-0/+5
This cleans up the module support that was commited earlier to work with what's actually emitted from our GCC port as it lands upstream. Most of the work here is adding new relocations to the kernel. There's some limitations on module loading imposed by the kernel: * The kernel doesn't support linker relaxation, which is necessary to support R_RISCV_ALIGN. In order to get reliable module building you're going to need to a GCC that supports the new '-mno-relax', which IIRC isn't going to be out until 8.1.0. It's somewhat unlikely that R_RISCV_ALIGN will appear in a module even without '-mno-relax' support, so issues shouldn't be common. * There is no large code model for RISC-V, which means modules must be loaded within a 32-bit signed offset of the kernel. We don't currently have any mechanism for ensuring this memory remains free or moving pages around, so issues here might be common. I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
2018-04-03RISC-V: Add sections of PLT and GOT for kernel moduleZong Li1-0/+5
The address of external symbols will locate more than 32-bit offset in 64-bit kernel with sv39 or sv48 virtual addressing. Module loader emits the GOT and PLT entries for data symbols and function symbols respectively. The PLT entry is a trampoline code for jumping to the 64-bit real address. The GOT entry is just the data symbol address. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-03riscv/ftrace: Add RECORD_MCOUNT supportAlan Kao1-0/+3
Now recordmcount.pl recognizes RISC-V object files. For the mechanism to work, we have to disable the linker relaxation. Cc: Greentime Hu <greentime@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-09-27RISC-V: Build InfrastructurePalmer Dabbelt1-0/+72
This patch contains all the build infrastructure that actually enables the RISC-V port. This includes Makefiles, linker scripts, and Kconfig files. It also contains the only top-level change, which adds RISC-V to the list of architectures that need a sed run to produce the ARCH variable when building locally. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 22:01:15 +0300