summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2021-01-30powerpc: Always enable queued spinlocks for 64s, disable for othersNicholas Piggin1-6/+2
Queued spinlocks have shown to have good performance and fairness properties even on smaller (2 socket) POWER systems. This selects them automatically for 64s. For other platforms they are de-selected, the standard spinlock is far simpler and smaller code, and single chips with a handful of cores is unlikely to show any improvement. CONFIG_EXPERT still allows this to be changed, e.g., to help debug performance or correctness issues. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210118123451.1452206-1-npiggin@gmail.com
2021-01-30powerpc/vas: Fix IRQ name allocationCédric Le Goater2-3/+9
The VAS device allocates a generic interrupt to handle page faults but the IRQ name doesn't show under /proc. This is because it's on stack. Allocate the name. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org
2021-01-30powerpc/iommu/debug: Add debugfs entries for IOMMU tablesAlexey Kardashevskiy1-0/+46
This adds a folder per LIOBN under /sys/kernel/debug/iommu with IOMMU table parameters. This is enabled by CONFIG_IOMMU_DEBUGFS. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210113102014.124452-1-aik@ozlabs.ru
2021-01-30powerpc/pseries/eeh: Make pseries_send_allow_unfreeze() staticCédric Le Goater1-2/+1
Only used locally. It fixes this W=1 compile error : ../arch/powerpc/platforms/pseries/eeh_pseries.c:697:5: error: no previous prototype for ‘pseries_send_allow_unfreeze’ [-Werror=missing-prototypes] 697 | int pseries_send_allow_unfreeze(struct pci_dn *pdn, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-24-clg@kaod.org
2021-01-30powerpc/pcidn: Make IOV setup routines staticCédric Le Goater1-8/+7
These are only used locally. It fixes these W=1 compile errors : ../arch/powerpc/platforms/pseries/pci.c:58:5: error: no previous prototype for ‘pseries_send_map_pe’ [-Werror=missing-prototypes] 58 | int pseries_send_map_pe(struct pci_dev *pdev, | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:91:6: error: no previous prototype for ‘pseries_set_pe_num’ [-Werror=missing-prototypes] 91 | void pseries_set_pe_num(struct pci_dev *pdev, u16 vf_index, __be16 pe_num) | ^~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:105:5: error: no previous prototype for ‘pseries_associate_pes’ [-Werror=missing-prototypes] 105 | int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:149:5: error: no previous prototype for ‘pseries_pci_sriov_enable’ [-Werror=missing-prototypes] 149 | int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:192:5: error: no previous prototype for ‘pseries_pcibios_sriov_enable’ [-Werror=missing-prototypes] 192 | int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:199:5: error: no previous prototype for ‘pseries_pcibios_sriov_disable’ [-Werror=missing-prototypes] 199 | int pseries_pcibios_sriov_disable(struct pci_dev *pdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-23-clg@kaod.org
2021-01-30powerpc/pseries: Make IOV setup routines staticCédric Le Goater1-4/+4
These are only used locally. It fixes these W=1 compile errors : ../arch/powerpc/platforms/pseries/setup.c:610:17: error: no previous prototype for ‘pseries_get_iov_fw_value’ [-Werror=missing-prototypes] 610 | resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, | ^~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/setup.c:646:6: error: no previous prototype for ‘of_pci_set_vf_bar_size’ [-Werror=missing-prototypes] 646 | void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes) | ^~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/setup.c:668:6: error: no previous prototype for ‘of_pci_parse_iov_addrs’ [-Werror=missing-prototypes] 668 | void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes) | ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-22-clg@kaod.org
2021-01-30KVM: PPC: Book3S HV: Declare some prototypesCédric Le Goater1-0/+7
This fixes these W=1 compile errors: ../arch/powerpc/kvm/book3s_hv_builtin.c:425:6: error: no previous prototype for ‘kvmppc_read_intr’ [-Werror=missing-prototypes] 425 | long kvmppc_read_intr(void) | ^~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_hv_builtin.c:652:6: error: no previous prototype for ‘kvmppc_bad_interrupt’ [-Werror=missing-prototypes] 652 | void kvmppc_bad_interrupt(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_hv_builtin.c:695:6: error: no previous prototype for ‘kvmhv_p9_set_lpcr’ [-Werror=missing-prototypes] 695 | void kvmhv_p9_set_lpcr(struct kvm_split_mode *sip) | ^~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_hv_builtin.c:740:6: error: no previous prototype for ‘kvmhv_p9_restore_lpcr’ [-Werror=missing-prototypes] 740 | void kvmhv_p9_restore_lpcr(struct kvm_split_mode *sip) | ^~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_hv_builtin.c:768:6: error: no previous prototype for ‘kvmppc_set_msr_hv’ [-Werror=missing-prototypes] 768 | void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr) | ^~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_hv_builtin.c:817:6: error: no previous prototype for ‘kvmppc_inject_interrupt_hv’ [-Werror=missing-prototypes] 817 | void kvmppc_inject_interrupt_hv(struct kvm_vcpu *vcpu, int vec, u64 srr1_flags) Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-21-clg@kaod.org
2021-01-30KVM: PPC: Book3S HV: Include prototypesCédric Le Goater1-0/+1
It fixes these W=1 compile errors : CC [M] arch/powerpc/kvm/book3s_64_mmu_hv.o ../arch/powerpc/kvm/book3s_64_mmu_hv.c:879:5: error: no previous prototype for ‘kvm_unmap_hva_range_hv’ [-Werror=missing-prototypes] 879 | int kvm_unmap_hva_range_hv(struct kvm *kvm, unsigned long start, unsigned long end) | ^~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:888:6: error: no previous prototype for ‘kvmppc_core_flush_memslot_hv’ [-Werror=missing-prototypes] 888 | void kvmppc_core_flush_memslot_hv(struct kvm *kvm, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:970:5: error: no previous prototype for ‘kvm_age_hva_hv’ [-Werror=missing-prototypes] 970 | int kvm_age_hva_hv(struct kvm *kvm, unsigned long start, unsigned long end) | ^~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:1011:5: error: no previous prototype for ‘kvm_test_age_hva_hv’ [-Werror=missing-prototypes] 1011 | int kvm_test_age_hva_hv(struct kvm *kvm, unsigned long hva) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:1019:6: error: no previous prototype for ‘kvm_set_spte_hva_hv’ [-Werror=missing-prototypes] 1019 | void kvm_set_spte_hva_hv(struct kvm *kvm, unsigned long hva, pte_t pte) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-20-clg@kaod.org
2021-01-30KVM: PPC: Make the VMX instruction emulation routines staticCédric Le Goater1-4/+4
These are only used locally. It fixes these W=1 compile errors : ../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes] 1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes] 1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes] 1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes] 1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~ Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
2021-01-30powerpc/watchdog: Declare soft_nmi_interrupt() prototypeCédric Le Goater2-0/+2
soft_nmi_interrupt() usage requires PPC_WATCHDOG to be configured. Check the CONFIG definition to declare the prototype. It fixes this W=1 compile error : ../arch/powerpc/kernel/watchdog.c:250:6: error: no previous prototype for ‘soft_nmi_interrupt’ [-Werror=missing-prototypes] 250 | void soft_nmi_interrupt(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-18-clg@kaod.org
2021-01-30powerpc/mm: Declare arch_report_meminfo() prototype.Cédric Le Goater1-0/+3
It fixes this W=1 compile error : ../arch/powerpc/mm/book3s64/pgtable.c:411:6: error: no previous prototype for ‘arch_report_meminfo’ [-Werror=missing-prototypes] 411 | void arch_report_meminfo(struct seq_file *m) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-17-clg@kaod.org
2021-01-30powerpc/mm/hugetlb: Make pseries_alloc_bootmem_huge_page() staticCédric Le Goater1-1/+1
pseries_alloc_bootmem_huge_page() is only used locally in alloc_bootmem_huge_page() and does not need to be external. It fixes this W=1 compile error : ../arch/powerpc/mm/hugetlbpage.c:220:12: error: no previous prototype for ‘pseries_alloc_bootmem_huge_page’ [-Werror=missing-prototypes] 220 | int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-16-clg@kaod.org
2021-01-30powerpc/mm: Declare preload_new_slb_context() prototypeCédric Le Goater1-0/+1
It fixes this W=1 compile error : ../arch/powerpc/mm/book3s64/slb.c:380:6: error: no previous prototype for ‘preload_new_slb_context’ [-Werror=missing-prototypes] 380 | void preload_new_slb_context(unsigned long start, unsigned long sp) | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-15-clg@kaod.org
2021-01-30powerpc/mm: Move hpte_insert_repeating() prototypeCédric Le Goater2-4/+2
It fixes this W=1 compile error : ../arch/powerpc/mm/book3s64/hash_utils.c:1867:6: error: no previous prototype for ‘hpte_insert_repeating’ [-Werror=missing-prototypes] 1867 | long hpte_insert_repeating(unsigned long hash, unsigned long vpn, | ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-14-clg@kaod.org
2021-01-30powerpc/mm: Declare some prototypesCédric Le Goater1-0/+2
It fixes this W=1 compile error : ../arch/powerpc/mm/book3s64/hash_utils.c:1515:5: error: no previous prototype for ‘__hash_page’ [-Werror=missing-prototypes] 1515 | int __hash_page(unsigned long trap, unsigned long ea, unsigned long dsisr, | ^~~~~~~~~~~ ../arch/powerpc/mm/book3s64/hash_utils.c:1850:6: error: no previous prototype for ‘low_hash_fault’ [-Werror=missing-prototypes] 1850 | void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc) | ^~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-13-clg@kaod.org
2021-01-30powerpc/optprobes: Make patch_imm64_load_insns() staticCédric Le Goater1-1/+1
patch_imm64_load_insns() is only used locally in arch_prepare_optimized_kprobe() and does not need to be external. It fixes this W=1 compile error : ../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm64_load_insns’ [-Werror=missing-prototypes] 149 | void patch_imm64_load_insns(unsigned int val, kprobe_opcode_t *addr) Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-12-clg@kaod.org
2021-01-30powerpc/optprobes: Remove unused routine patch_imm32_load_insns()Cédric Le Goater1-19/+0
Commit 650b55b707fd ("powerpc: Add prefixed instructions to instruction data type") removed the use of patch_imm32_load_insns(). Clean it up to fix this W=1 compile error : ../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm32_load_insns’ [-Werror=missing-prototypes] 149 | void patch_imm32_load_insns(unsigned int val, kprobe_opcode_t *addr) Fixes: 650b55b707fd ("powerpc: Add prefixed instructions to instruction data type") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-11-clg@kaod.org
2021-01-30powerpc/smp: Make debugger_ipi_callback() staticCédric Le Goater1-1/+1
debugger_ipi_callback() is a local routine used as a NMI IPI handler and does not need to be external. It fixes this W=1 compile error : ../arch/powerpc/kernel/smp.c:579:6: error: no previous prototype for ‘debugger_ipi_callback’ [-Werror=missing-prototypes] 579 | void debugger_ipi_callback(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-10-clg@kaod.org
2021-01-30powerpc/smp: Include tick_broadcast() prototypeCédric Le Goater1-0/+1
It fixes this W=1 compile error : ../arch/powerpc/kernel/smp.c:569:6: error: no previous prototype for ‘tick_broadcast’ [-Werror=missing-prototypes] 569 | void tick_broadcast(const struct cpumask *mask) | ^~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-9-clg@kaod.org
2021-01-30powerpc/mce: Include prototypesCédric Le Goater1-0/+1
It fixes these W=1 compile errors : ../arch/powerpc/kernel/mce.c:591:14: error: no previous prototype for ‘machine_check_early’ [-Werror=missing-prototypes] 591 | long notrace machine_check_early(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kernel/mce.c:725:6: error: no previous prototype for ‘hmi_exception_realmode’ [-Werror=missing-prototypes] 725 | long hmi_exception_realmode(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-8-clg@kaod.org
2021-01-30powerpc/setup_64: Make some routines staticCédric Le Goater1-3/+4
The following routines are only called by local services and do not need to be external symbols. It fixes these W=1 errors : ../arch/powerpc/kernel/setup_64.c:261:13: error: no previous prototype for ‘record_spr_defaults’ [-Werror=missing-prototypes] 261 | void __init record_spr_defaults(void) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kernel/setup_64.c:1011:6: error: no previous prototype for ‘entry_flush_enable’ [-Werror=missing-prototypes] 1011 | void entry_flush_enable(bool enable) | ^~~~~~~~~~~~~~~~~~ ../arch/powerpc/kernel/setup_64.c:1023:6: error: no previous prototype for ‘uaccess_flush_enable’ [-Werror=missing-prototypes] 1023 | void uaccess_flush_enable(bool enable) | ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-7-clg@kaod.org
2021-01-30powerpc/pmem: Include pmem prototypesCédric Le Goater1-0/+1
It fixes this W=1 compile error : ../arch/powerpc/lib/pmem.c:51:6: error: no previous prototype for ‘arch_wb_cache_pmem’ [-Werror=missing-prototypes] 51 | void arch_wb_cache_pmem(void *addr, size_t size) | ^~~~~~~~~~~~~~~~~~ ../arch/powerpc/lib/pmem.c:58:6: error: no previous prototype for ‘arch_invalidate_pmem’ [-Werror=missing-prototypes] 58 | void arch_invalidate_pmem(void *addr, size_t size) | ^~~~~~~~~~~~~~~~~~~~ Fixes: 32ce3862af3c ("powerpc/lib: Implement PMEM API") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-6-clg@kaod.org
2021-01-30powerpc/pseries/ras: Make init_ras_hotplug_IRQ() staticCédric Le Goater1-1/+1
init_ras_hotplug_IRQ() is a local routine used by a machine init call and it doesn't need to be external. It fixes this W=1 compile error: ../arch/powerpc/platforms/pseries/ras.c:125:12: error: no previous prototype for ‘init_ras_hotplug_IRQ’ [-Werror=missing-prototypes] 125 | int __init init_ras_hotplug_IRQ(void) | ^~~~~~~~~~~~~~~~~~~~ Fixes: c9dccf1d074a ("powerpc/pseries: Enable RAS hotplug events later") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-5-clg@kaod.org
2021-01-30powerpc/pseries/eeh: Make pseries_pcibios_bus_add_device() staticCédric Le Goater1-1/+1
pseries_pcibios_bus_add_device() is a local routine defining the pcibios_bus_add_device() handler of the pseries machine in eeh_pseries_init(). It doesn't need to be external. It fixes this W=1 compile error: ../arch/powerpc/platforms/pseries/eeh_pseries.c:46:6: error: no previous prototype for ‘pseries_pcibios_bus_add_device’ [-Werror=missing-prototypes] 46 | void pseries_pcibios_bus_add_device(struct pci_dev *pdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: dae7253f9f78 ("powerpc/pseries: Add pseries SR-IOV Machine dependent calls") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-4-clg@kaod.org
2021-01-30powerpc/pseries/ras: Remove unused variable 'status'Cédric Le Goater1-9/+4
The last use of 'status' was removed in 2012. Remove the variable to fix this W=1 compile error. ../arch/powerpc/platforms/pseries/ras.c: In function ‘ras_epow_interrupt’: ../arch/powerpc/platforms/pseries/ras.c:318:6: error: variable ‘status’ set but not used [-Werror=unused-but-set-variable] 318 | int status; | ^~~~~~ Fixes: 55fc0c561742 ("powerpc/pseries: Parse and handle EPOW interrupts") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-3-clg@kaod.org
2021-01-30powerpc/mm: Include __find_linux_pte() prototypeCédric Le Goater1-0/+1
It fixes this W=1 compile error : ../arch/powerpc/mm/pgtable.c:337:8: error: no previous prototype for ‘__find_linux_pte’ [-Werror=missing-prototypes] 337 | pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea, | ^~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-2-clg@kaod.org
2021-01-30powerpc/perf/hv-24x7: Dont create sysfs event files for dummy eventsKajol Jain1-0/+15
The hv_24x7 performance monitoring unit creates a list of supported events from the event catalog obtained via HCALL. The hv_24x7 catalog could also contain invalid or dummy events with names like RESERVED*. These events do not have any hardware counters backing them. Add a check to string compare the event names to filter such events out. Result on power9 machine: Before this patch: ..... hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event] hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event] hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event] hv_24x7/RESERVED_NEST1,chip=?/ [Kernel PMU event] hv_24x7/RESERVED_NEST10,chip=?/ [Kernel PMU event] hv_24x7/RESERVED_NEST11,chip=?/ [Kernel PMU event] hv_24x7/RESERVED_NEST12,chip=?/ [Kernel PMU event] hv_24x7/RESERVED_NEST13,chip=?/ [Kernel PMU event] ...... dmesg: [ 0.000362] printk: console [hvc0] enabled [ 0.815452] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs After this patch: ...... hv_24x7/PM_XLINK2_OUT_ODD_AVLBL_CYC,chip=?/ [Kernel PMU event] hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event] hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event] hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event] hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event] hv_24x7/TOD,chip=?/ [Kernel PMU event] ...... dmesg: [ 0.000357] printk: console [hvc0] enabled [ 0.808592] hv-24x7: read 1530 catalog entries, created 509 event attrs (0 failures), 275 descs Signed-off-by: Kajol Jain <kjain@linux.ibm.com> [mpe: Simplify ignore_event(), minor change log formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201228085204.18026-1-kjain@linux.ibm.com
2021-01-30powerpc/64s/kuap: Use mmu_has_feature()Michael Ellerman1-2/+2
In commit 8150a153c013 ("powerpc/64s: Use early_mmu_has_feature() in set_kuap()") we switched the KUAP code to use early_mmu_has_feature(), to avoid a bug where we called set_kuap() before feature patching had been done, leading to recursion and crashes. That path, which called probe_kernel_read() from printk(), has since been removed, see commit 2ac5a3bf7042 ("vsprintf: Do not break early boot with probing addresses"). Additionally probe_kernel_read() no longer invokes any KUAP routines, since commit fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault") and c33165253492 ("powerpc: use non-set_fs based maccess routines"). So it should now be safe to use mmu_has_feature() in the KUAP routines, because we shouldn't invoke them prior to feature patching. This is essentially a revert of commit 8150a153c013 ("powerpc/64s: Use early_mmu_has_feature() in set_kuap()"), but we've since added a second usage of early_mmu_has_feature() in get_kuap(), so we convert that to use mmu_has_feature() as well. Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Depends-on: c33165253492 ("powerpc: use non-set_fs based maccess routines"). Link: https://lore.kernel.org/r/20201217005306.895685-1-mpe@ellerman.id.au
2021-01-29arch: powerpc: Remove oprofileViresh Kumar12-4637/+0
The previous commit already disabled building oprofile, lets remove the oprofile directory now. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-29arch: powerpc: Stop building and using oprofileViresh Kumar28-347/+1
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. This commits stops building oprofile for powerpc and removes any reference to it from directories in arch/powerpc/ apart from arch/powerpc/oprofile, which will be removed in the next commit (this is broken into two commits as the size of the commit became very big, ~5k lines). Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't removed as it was also used by other parts of the code. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-4/+73
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+2
Merge misc fixes from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (pagealloc, memcg, kasan, memory-failure, and highmem), ubsan, proc, and MAINTAINERS" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add a couple more files to the Clang/LLVM section proc_sysctl: fix oops caused by incorrect command parameters powerpc/mm/highmem: use __set_pte_at() for kmap_local() mips/mm/highmem: use set_pte() for kmap_local() mm/highmem: prepare for overriding set_pte_at() sparc/mm/highmem: flush cache and TLB mm: fix page reference leak in soft_offline_page() ubsan: disable unsigned-overflow check for i386 kasan, mm: fix resetting page_alloc tags for HW_TAGS kasan, mm: fix conflicts with init_on_alloc/free kasan: fix HW_TAGS boot parameters kasan: fix incorrect arguments passing in kasan_add_zero_shadow kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow mm: fix numa stats for thp migration mm: memcg: fix memcg file_dirty numa stat mm: memcg/slab: optimize objcg stock draining mm: fix initialization of struct page for holes in memory layout x86/setup: don't remove E820_TYPE_RAM for pfn 0
2021-01-24powerpc/mm/highmem: use __set_pte_at() for kmap_local()Thomas Gleixner1-0/+2
The original PowerPC highmem mapping function used __set_pte_at() to denote that the mapping is per CPU. This got lost with the conversion to the generic implementation. Override the default map function. Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24fs: add mount_setattr()Christian Brauner1-0/+1
This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24fs: make helpers idmap mount awareChristian Brauner1-1/+2
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24attr: handle idmapped mountsChristian Brauner1-1/+1
When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous ↵Nicholas Piggin1-12/+16
interrupt When an asynchronous interrupt calls irq_exit, it checks for softirqs that may have been created, and runs them. Running softirqs enables local irqs, which can replay pending interrupts causing recursion in replay_soft_interrupts. This abridged trace shows how this can occur: ! NIP replay_soft_interrupts LR interrupt_exit_kernel_prepare Call Trace: interrupt_exit_kernel_prepare (unreliable) interrupt_return --- interrupt: ea0 at __rb_reserve_next NIP __rb_reserve_next LR __rb_reserve_next Call Trace: ring_buffer_lock_reserve trace_function function_trace_call ftrace_call __do_softirq irq_exit timer_interrupt ! replay_soft_interrupts interrupt_exit_kernel_prepare interrupt_return --- interrupt: ea0 at arch_local_irq_restore This can not be prevented easily, because softirqs must not block hard irqs, so it has to be dealt with. The recursion is bounded by design in the softirq code because softirq replay disables softirqs and loops around again to check for new softirqs created while it ran, so that's not a problem. However it does mess up interrupt replay state, causing superfluous interrupts when the second replay_soft_interrupts clears a pending interrupt, leaving it still set in the first call in the 'happened' local variable. Fix this by not caching a copy of irqs_happened across interrupt handler calls. Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210123061244.2076145-1-npiggin@gmail.com
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+23
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20powerpc/64s: fix scv entry fallback flush vs interruptNicholas Piggin6-4/+71
The L1D flush fallback functions are not recoverable vs interrupts, yet the scv entry flush runs with MSR[EE]=1. This can result in a timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting the EXRFI save area, which ends up corrupting userspace registers for scv return. Fix this by disabling RI and EE for the scv entry fallback flush. Fixes: f79643787e0a0 ("powerpc/64s: flush L1D on kernel entry") Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
2021-01-16Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-5/+20
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-01-16 1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support, that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman. 2) Add support for using kernel module global variables (__ksym externs in BPF programs) retrieved via module's BTF, from Andrii Nakryiko. 3) Generalize BPF stackmap's buildid retrieval and add support to have buildid stored in mmap2 event for perf, from Jiri Olsa. 4) Various fixes for cross-building BPF sefltests out-of-tree which then will unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker. 5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann. 6) Clean up driver's XDP buffer init and split into two helpers to init per- descriptor and non-changing fields during processing, from Lorenzo Bianconi. 7) Minor misc improvements to libbpf & bpftool, from Ian Rogers. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits) perf: Add build id data in mmap2 event bpf: Add size arg to build_id_parse function bpf: Move stack_map_get_build_id into lib bpf: Document new atomic instructions bpf: Add tests for new BPF atomic operations bpf: Add bitwise atomic instructions bpf: Pull out a macro for interpreting atomic ALU operations bpf: Add instructions for atomic_[cmp]xchg bpf: Add BPF_FETCH field / create atomic_fetch_add instruction bpf: Move BPF_STX reserved field check into BPF_STX verifier code bpf: Rename BPF_XADD and prepare to encode other atomics in .imm bpf: x86: Factor out a lookup table for some ALU opcodes bpf: x86: Factor out emission of REX byte bpf: x86: Factor out emission of ModR/M for *(reg + off) tools/bpftool: Add -Wall when building BPF programs bpf, libbpf: Avoid unused function warning on bpf_tail_call_static selftests/bpf: Install btf_dump test cases selftests/bpf: Fix installation of urandom_read selftests/bpf: Move generated test files to $(TEST_GEN_FILES) selftests/bpf: Fix out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15bpf: Rename BPF_XADD and prepare to encode other atomics in .immBrendan Jackman1-5/+20
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
2021-01-14powerpc/vdso: Fix clock_gettime_fallback for vdso32Andreas Schwab1-1/+15
The second argument of __kernel_clock_gettime64 points to a struct __kernel_timespec, with 64-bit time_t, so use the clock_gettime64 syscall in the fallback function for the 32-bit VDSO. Similarly, clock_getres_fallback should use the clock_getres_time64 syscall, though it isn't yet called from the 32-bit VDSO. Fixes: d0e3fc69d00d ("powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> [chleroy: Moved into a single #ifdef __powerpc64__ block] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0c0ab0eb3cc80687c326f76ff0dd5762b8812ecc.1610452505.git.christophe.leroy@csgroup.eu
2021-01-12powerpc: Fix alignment bug within the init sectionsAriel Marcovitch1-0/+8
This is a bug that causes early crashes in builds with an .exit.text section smaller than a page and an .init.text section that ends in the beginning of a physical page (this is kinda random, which might explain why this wasn't really encountered before). The init sections are ordered like this: .init.text .exit.text .init.data Currently, these sections aren't page aligned. Because the init code might become read-only at runtime and because the .init.text section can potentially reside on the same physical page as .init.data, the beginning of .init.data might be mapped read-only along with .init.text. Then when the kernel tries to modify a variable in .init.data (like kthreadd_done, used in kernel_init()) the kernel panics. To avoid this, make _einittext page aligned and also align .exit.text to make sure .init.data is always seperated from the text segments. Fixes: 060ef9d89d18 ("powerpc32: PAGE_EXEC required for inittext") Signed-off-by: Ariel Marcovitch <ariel.marcovitch@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210102201156.10805-1-ariel.marcovitch@gmail.com
2021-01-06Kconfig: regularize selection of CONFIG_BINFMT_ELFAl Viro1-1/+0
with mips converted to use of fs/config_binfmt_elf.c, there's no need to keep selects of that thing all over arch/* - we can simply turn into def_bool y if COMPAT && BINFMT_ELF (in fs/Kconfig.binfmt) and get rid of all selects. Several architectures got those selects wrong (e.g. you could end up with sparc64 sans BINFMT_ELF, with select violating dependencies, etc.) Randy Dunlap has spotted some of those; IMO this is simpler than his fix, but it depends upon the stuff that would need to be backported, so we might end up using his variant for -stable. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06elf_prstatus: collect the common part (everything before pr_reg) into a structAl Viro1-3/+3
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating the beginning of compat_elf_prstatus, take these fields into a separate structure (compat_elf_prstatus_common), so that it could be reused. Due to the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we need the same shape change done to native struct elf_prstatus, gathering the fields prior to pr_reg into a new structure (struct elf_prstatus_common). Fortunately, offset of pr_reg is always a multiple of 16 with no padding right before it, so it's possible to turn all the stuff prior to it into a single member without disturbing the layout. [build fix from Geert Uytterhoeven folded in] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06powerpc: Handle .text.{hot,unlikely}.* in linker scriptNathan Chancellor1-1/+1
Commit eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections") added ".text.unlikely.*" and ".text.hot.*" due to an LLVM change [1]. After another LLVM change [2], these sections are seen in some PowerPC builds, where there is a orphan section warning then build failure: $ make -skj"$(nproc)" \ ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- LLVM=1 O=out \ distclean powernv_defconfig zImage.epapr ld.lld: warning: kernel/built-in.a(panic.o):(.text.unlikely.) is being placed in '.text.unlikely.' ... ld.lld: warning: address (0xc000000000009314) of section .text is not a multiple of alignment (256) ... ERROR: start_text address is c000000000009400, should be c000000000008000 ERROR: try to enable LD_HEAD_STUB_CATCH config option ERROR: see comments in arch/powerpc/tools/head_check.sh ... Explicitly handle these sections like in the main linker script so there is no more build failure. [1]: https://reviews.llvm.org/D79600 [2]: https://reviews.llvm.org/D92493 Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections") Cc: stable@vger.kernel.org Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1218 Link: https://lore.kernel.org/r/20210104205952.1399409-1-natechancellor@gmail.com
2021-01-04powerpc/32s: Fix RTAS machine check with VMAP stackChristophe Leroy1-0/+9
When we have VMAP stack, exception prolog 1 sets r1, not r11. When it is not an RTAS machine check, don't trash r1 because it is needed by prolog 1. Fixes: da7bb43ab9da ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU") Fixes: d2e006036082 ("powerpc/32: Use SPRN_SPRG_SCRATCH2 in exception prologs") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Squash in fixup for RTAS machine check from Christophe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bc77d61d1c18940e456a2dee464f1e2eda65a3f0.1608621048.git.christophe.leroy@csgroup.eu
2020-12-30local64.h: make <asm/local64.h> mandatoryRandy Dunlap1-1/+0
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds7-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-23Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-12/+111
Pull dma-mapping updates from Christoph Hellwig: - support for a partial IOMMU bypass (Alexey Kardashevskiy) - add a DMA API benchmark (Barry Song) - misc fixes (Tiezhu Yang, tangjianqiang) * tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping: selftests/dma: add test application for DMA_MAP_BENCHMARK dma-mapping: add benchmark support for streaming DMA APIs dma-contiguous: fix a typo error in a comment dma-pool: no need to check return value of debugfs_create functions powerpc/dma: Fallback to dma_ops when persistent memory present dma-mapping: Allow mixing bypass and mapped DMA operation
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 13:34:22 +0300