| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rather than bifurcate the call depending on whether or not HV is
possible, and have the HV entry test for PR, just make a single
common point which does the demultiplexing. This makes it simpler
to add another type of exit handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210528090752.3542186-2-npiggin@gmail.com
|
|
Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definitions
behind a configuration option, which will allow us to make some
more radical changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Directly including linux/irqdomain.h was hiding all sort of sins,
which have now been fixed. Drop the spurious include.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h
Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.
The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.
A followup patch will remove irq_domain_add_legacy_isa.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A bunch of PPC files are missing the inclusion of linux/of.h and
linux/irqdomain.h, relying on transitive inclusion from another
file.
As we are about to break this dependency, make sure these dependencies
are explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
|
|
To aid debugging PS3 boot problems change the log level
of several PS3 device errors from pr_debug to pr_warn.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb5c1c10da0bbdeb27c8b069187b4f58e429e837.1622746428.git.geoff@infradead.org
|
|
To aid debugging, add a new PS3 kernel config option
PS3_VERBOSE_RESULT that, when enabled, will print more
verbose messages for the result of LV1 hypercalls.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0ce4b6969a08094a747bd382dbfd30b72ebc192d.1622746428.git.geoff@infradead.org
|
|
Change the PS3 linker script to align the DTB at 8 bytes,
the same alignment as that of the of the 'generic' powerpc
linker script.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/245897ed65e402686a4b114ba618e935cb5c6506.1622822173.git.geoff@infradead.org
|
|
Add a new sysfs entry /sys/firmware/ps3/fw-version that exports
the PS3's firmware version.
The firmware version is available through an LV1 hypercall, and we've
been printing it to the boot log, but haven't provided an easy way for
user utilities to get it.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/41509b2da647cd34b1331cc4756c8774b1e284eb.1622822173.git.geoff@infradead.org
|
|
A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^
1 error generated.
Undefine this macro so that the runtime patching introduced by
commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1386
Link: https://github.com/llvm/llvm-project/commit/62b5df7fe2b3fda1772befeda15598fbef96a614
Link: https://lore.kernel.org/r/20210528182752.1852002-1-nathan@kernel.org
|
|
Wire up the quotactl_fd syscall.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix our KVM reverse map real-mode handling since we enabled huge
vmalloc (in some configurations).
Revert a recent change to our IOMMU code which broke some devices.
Fix KVM handling of FSCR on P7/P8, which could have possibly let a
guest crash it's Qemu.
Fix kprobes validation of prefixed instructions across page boundary.
Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas,
Frederic Barrat, Naveen N. Rao, and Nicholas Piggin"
* tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs"
KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
powerpc: Fix reverse map real-mode address lookup with huge vmalloc
powerpc/kprobes: Fix validation of prefixed instructions across page boundary
|
|
Commit b26e8f27253a ("powerpc/mem: Move cache flushing functions into
mm/cacheflush.c") removed asm/sparsemem.h which is required when
CONFIG_MEMORY_HOTPLUG is selected to get the declaration of
create_section_mapping().
Add it back.
Fixes: b26e8f27253a ("powerpc/mem: Move cache flushing functions into mm/cacheflush.c")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3e5b63bb3daab54a1eb9c20221c2e9528c4db9b3.1622883330.git.christophe.leroy@csgroup.eu
|
|
Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
FSCR. The logic explained in that patch actually applies there to the
old path well: a context switch can be made before kvmppc_vcpu_run_hv
restores the host FSCR and returns.
Now both the p9 and the p7/8 paths now save and restore their FSCR, it
no longer needs to be restored at the end of kvmppc_vcpu_run_hv
Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526125851.3436735-1-npiggin@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Kprobes has a counter 'nmissed', that is used to count the number of
times a probe handler was not called. This generally happens when we hit
a kprobe while handling another kprobe.
However, if one of the probe handlers causes a fault, we are currently
incrementing 'nmissed'. The comment in fault handler indicates that this
can be used to account faults taken by the probe handlers. But, this has
never been the intention as is evident from the comment above 'nmissed'
in 'struct kprobe':
/*count the number of times this probe was temporarily disarmed */
unsigned long nmissed;
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210601120150.672652-1-naveen.n.rao@linux.vnet.ibm.com
|
|
The reason for kprobe::fault_handler(), as given by their comment:
* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.
Is just plain bad. Those other handlers are ran from non-preemptible
context and had better use _nofault() functions. Also, there is no
upstream usage of this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210525073213.561116662@infradead.org
|
|
This reverts commit 3c0468d4451eb6b4f6604370639f163f9637a479.
That commit was breaking alignment guarantees for the DMA address when
allocating coherent mappings, as described in
Documentation/core-api/dma-api-howto.rst
It was also noticed by Mellanox' driver:
[ 1515.763621] mlx5_core c002:01:00.0: mlx5_frag_buf_alloc_node:146:(pid 13402): unexpected map alignment: 0x0800000000c61000, page_shift=16
[ 1515.763635] mlx5_core c002:01:00.0: mlx5_cqwq_create:181:(pid
13402): mlx5_frag_buf_alloc_node() failed, -12
Fixes: 3c0468d4451e ("powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526144540.117795-1-fbarrat@linux.ibm.com
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
|
|
Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
FSCR. The logic explained in that patch actually applies there to the
old path well: a context switch can be made before kvmppc_vcpu_run_hv
restores the host FSCR and returns.
Now both the p9 and the p7/8 paths now save and restore their FSCR, it
no longer needs to be restored at the end of kvmppc_vcpu_run_hv
Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526125851.3436735-1-npiggin@gmail.com
|
|
real_vmalloc_addr() does not currently work for huge vmalloc, which is
what the reverse map can be allocated with for radix host, hash guest.
Extract the hugepage aware equivalent from eeh code into a helper, and
convert existing sites including this one to use it.
Fixes: 8abddd968a30 ("powerpc/64s/radix: Enable huge vmalloc mappings")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526120005.3432222-1-npiggin@gmail.com
|
|
When checking if the probed instruction is the suffix of a prefixed
instruction, we access the instruction at the previous word. If the
probed instruction is the very first word of a module, we can end up
trying to access an invalid page.
Fix this by skipping the check for all instructions at the beginning of
a page. Prefixed instructions cannot cross a 64-byte boundary and as
such, we don't expect to encounter a suffix as the very first word in a
page for kernel text. Even if there are prefixed instructions crossing
a page boundary (from a module, for instance), the instruction will be
illegal, so preventing probing on the suffix of such prefix instructions
isn't worthwhile.
Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0df9a032a05576a2fa8e97d1b769af2ff0eafbd6.1621416666.git.naveen.n.rao@linux.vnet.ibm.com
|
|
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.
Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is inspired by commit 262de4102c7bb8 (kvm: exit halt polling on
need_resched() as well). Due to PPC implements an arch specific halt
polling logic, we have to the need_resched() check there as well. This
patch adds a helper function that can be shared between book3s and generic
halt-polling loops.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Jim Mattson <jmattson@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-1-git-send-email-wanpengli@tencent.com>
[Make the function inline. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can
use the obj-y syntax.
Add an empty file if it is missing in arch/$(SRCARCH)/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that all architectures implement ARCH_ATOMIC, we can make it
mandatory, removing the Kconfig symbol and logic for !ARCH_ATOMIC.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-33-mark.rutland@arm.com
|
|
We'd like all architectures to convert to ARCH_ATOMIC, as once all
architectures are converted it will be possible to make significant
cleanups to the atomics headers, and this will make it much easier to
generically enable atomic functionality (e.g. debug logic in the
instrumented wrappers).
As a step towards that, this patch migrates powerpc to ARCH_ATOMIC. The
arch code provides arch_{atomic,atomic64,xchg,cmpxchg}*(), and common
code wraps these with optional instrumentation to provide the regular
functions.
While atomic_try_cmpxchg_lock() is not part of the common atomic API, it
is given an `arch_` prefix for consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-28-mark.rutland@arm.com
|
|
The asm-generic implementations of cmpxchg_local() and cmpxchg64_local()
use a `_generic` suffix to distinguish themselves from arch code or
wrappers used elsewhere.
Subsequent patches will add ARCH_ATOMIC support to these
implementations, and will distinguish more functions with a `generic`
portion. To align with how ARCH_ATOMIC uses an `arch_` prefix, it would
be helpful to use a `generic_` prefix rather than a `_generic` suffix.
In preparation for this, this patch renames the existing functions to
make `generic` a prefix rather than a suffix. There should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210525140232.53872-12-mark.rutland@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
|
|
Log buffer entries that are too long for dump_log_buf()'s small
local buffer are:
* silently discarded when a single-line entry is too long;
kmsg_dump_get_line() returns true but sets &len to 0.
* silently truncated to the last fitting new line when a multi-line
entry is too long, e.g. register dumps from __show_regs(); this
seems undetectable via the kmsg_dump API.
xmon_printf()'s internal buffer is already 1KB; enlarge
dump_log_buf()'s own buffer to match and make it statically
allocated. Verified that this allows complete printing of register
dumps on ppc64le with both CONFIG_PRINTK_TIME=y and
CONFIG_PRINTK_CALLER=y.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514162420.2911458-1-nathanl@linux.ibm.com
|
|
Commit 51c9c0843993 ("powerpc/kprobes: Implement Optprobes")
implemented a powerpc specific version of optinsn in order
to workaround the 32Mb limitation for direct branches.
Instead of implementing a dedicated powerpc version, use the
common optinsn and override the allocation and freeing functions.
This also indirectly remove the CLANG warning about
is_kprobe_ppc_optinsn_slot() not being use, and the powerpc will
now benefit from commit 5b485629ba0d ("kprobes, extable: Identify
kprobes trampolines as kernel text area")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec5e85f9f9abcfecc959a03495f4a7858eb4d203.1620896780.git.christophe.leroy@csgroup.eu
|
|
Until clang-12, clang would attempt to assemble 32b powerpc assembler in
64b emulation mode when using a 64b target triple with -m32, leading to
errors during the build of the compat VDSO. Simply disable all of
CONFIG_COMPAT; users should upgrade to the latest release of clang for
proper support.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1160
Link: https://github.com/llvm/llvm-project/commits/2288319733cd5f525bf7e24dece08bfcf9d0ff9e
Link: https://groups.google.com/g/clang-built-linux/c/ayNmi3HoNdY/m/XJAGj_G2AgAJ
Link: https://lore.kernel.org/r/20210518205858.2440344-1-ndesaulniers@google.com
|
|
While looking at -Wundef warnings, the #if CONFIG_EEH stood out as a
possible candidate to convert to #ifdef CONFIG_EEH.
It seems that based on Kconfig dependencies it's not possible to build
this file without CONFIG_EEH enabled, but based on upstream discussion,
it's not clear yet that CONFIG_EEH should be enabled by default.
For now, simply fix the -Wundef warning.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/570
Link: https://lore.kernel.org/lkml/67f6cd269684c9aa8463ff4812c3b4605e6739c3.camel@perches.com/
Link: https://lore.kernel.org/lkml/CAOSf1CGoN5R0LUrU=Y=UWho1Z_9SLgCX8s3SbFJXwJXc5BYz4A@mail.gmail.com/
Link: https://lore.kernel.org/r/20210518204044.2390064-1-ndesaulniers@google.com
|
|
This adds selftests for setb instruction.
Signed-off-by: Sathvika Vasireddy <sathvika@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b05b61ccb5f10279d46fed490796f32ea2ccc270.1620727160.git.sathvika@linux.vnet.ibm.com
|
|
This adds emulation support for the following instruction:
* Set Boolean (setb)
Signed-off-by: Sathvika Vasireddy <sathvika@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7b735b0c898da0db2af8628a64df2f5114596f22.1620727160.git.sathvika@linux.vnet.ibm.com
|
|
Make it easier to generate a 32 or 64-bit specific randconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Requested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210428132700.3426100-1-mpe@ellerman.id.au
|
|
We don't need the 'lmbs_available' variable to count the valid LMBs and
to check if we have less than 'lmbs_to_remove'. We must ensure that the
entire LMB range must be removed, so we can error out immediately if any
LMB in the range is marked as reserved.
Add a couple of comments explaining the reasoning behind the differences
we have in this function in contrast to what it is done in its sister
function, dlpar_memory_remove_by_count().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-5-danielhb413@gmail.com
|
|
After marking the LMBs as reserved depending on dlpar_remove_lmb() rc,
we evaluate whether we need to add the LMBs back or if we can release
the LMB DRCs. In both cases, a for_each_drmem_lmb() loop without a break
condition is used. This means that we're going to cycle through all LMBs
of the partition even after we're done with what we were going to do.
This patch adds break conditions in both loops to avoid this. The
'lmbs_removed' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
that the operation we're doing (adding back LMBs or releasing DRCs) is
completed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-4-danielhb413@gmail.com
|
|
DRCONF_MEM_RESERVED is a flag that represents the "Reserved Memory"
status in LOPAR v2.10, section 4.2.8. If a LMB is marked as reserved,
quoting LOPAR, "is not to be used or altered by the base OS". This flag
is read only in the kernel, being set by the firmware/hypervisor in the
DT. As an example, QEMU will set this flag in hw/ppc/spapr.c,
spapr_dt_dynamic_memory().
lmb_is_removable() does not check for DRCONF_MEM_RESERVED. This function
is used in dlpar_remove_lmb() as a guard before the removal logic. Since
it is failing to check for !RESERVED, dlpar_remove_lmb() will fail in a
later stage instead of failing in the validation when receiving a
reserved LMB as input.
lmb_is_removable() is also used in dlpar_memory_remove_by_count() to
evaluate if we have enough LMBs to complete the request. The missing
!RESERVED check in this case is causing dlpar_memory_remove_by_count()
to miscalculate the number of elegible LMBs for the removal, and can
make it error out later on instead of failing in the validation with the
'not enough LMBs to satisfy request' message.
Making a DRCONF_MEM_RESERVED check in lmb_is_removable() fixes all these
issues.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-3-danielhb413@gmail.com
|
|
As previously done in dlpar_cpu_remove() for CPUs, this patch changes
dlpar_memory_remove_by_ic() to unisolate the LMB DRC when the LMB is
failed to be removed. The hypervisor, seeing a LMB DRC that was supposed
to be removed being unisolated instead, can do error recovery on its
side.
This change is done in dlpar_memory_remove_by_ic() only because, as of
today, only QEMU is using this code path for error recovery (via the
PSERIES_HP_ELOG_ID_DRC_IC event). phyp treats it as a no-op.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-2-danielhb413@gmail.com
|
|
The statement of the last "if (xxx)" branch is the same as the "else"
branch. Delete it to simplify code.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510131924.3907-1-thunder.leizhen@huawei.com
|
|
dlpar_memory_remove() is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514071041.17432-1-yuehaibing@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
|
|
The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.
Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-2-npiggin@gmail.com
|
|
The immediate problem is that after commit
0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.
The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().
This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop unrelated cleanup & cleanup change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520032919.358935-1-aik@ozlabs.ru
|
