summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
AgeCommit message (Collapse)AuthorFilesLines
2013-11-05powerpc/boot: Properly handle the base "of" boot wrapperBenjamin Herrenschmidt1-0/+4
The wrapper script needs an explicit rule for the "of" boot wrapper (generic wrapper, similar to pseries). Before 0c9fa29149d3726e14262aeb0c8461a948cc9d56 it was hanlded implicitly by the statement: platformo=$object/"$platform".o But now that epapr.o needs to be added, that doesn't work and an explicit rule must be added. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/boot: Don't change link address for OF-based platformsPaul Mackerras1-0/+4
Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") adjusts the wrapper address unnecessarily for platforms that use arch/powerpc/boot/of.c, since the code there allocates space for the kernel wherever it can find it and doesn't necessarily load the kernel at address 0. Changing the link address is actually harmful since it can cause the zImage to overlap with Open Firmware and thus fail to boot. To fix this, we set make_space to n for all of the platforms that use of.o. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-29powerpc/dts/c293pcie: Add range field for IFC NANDPrabhakar Kushwaha1-0/+1
C290PCIe has NAND flash present on IFC Chip Select(CS) 1. So Add "ranges" field for NAND flash on CS1. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/b4860emu: Add device tree file for b4860emuYork Sun1-0/+218
B4860EMU is a emualtor target with minimum peripherals. It is based on B4860QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/t4240emu: Add device tree file for t4240emuYork Sun1-0/+268
T4240EMU is an emulator target with minimum peripherals. It is based on T4240QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc: Add I2C bus multiplexer node for B4 and T4240QDSHongtao Jia2-47/+73
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used. The sub-nodes are also reorganized according to right I2C topology. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/dts: Correct sdhci quirk for bsc9131Haijun.Zhang1-1/+1
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12" to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/eSDCH: Specify voltage for T4240QDSHaijun.Zhang1-0/+4
Freescale T4240QDS reference board has extra voltage shifters added to allow 3.3V operation, so add 3.3v voltage support for T4240QDS. 1.8v and 3.3v is recommand for eMMC and SDHC card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/e500v2: Include Power ISA propertiesLijun Pan1-0/+3
bsc9131 device tree does not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/e6500: Include Power ISA propertiesLijun Pan2-0/+4
b4420 and b4860 device trees do not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-29powerpc/dts: fix sRIO error interrupt for b4860Minghuan Lian1-1/+1
For B4 platform, MPIC EISR register is in reversed bitmap order, instead of "Error interrupt source 0-31. Bit 0 represents SRC0." the correct ordering is "Error interrupt source 0-31. Bit 0 represents SRC31." This patch is to fix sRIO EISR bit value of error interrupt in dts node. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-11powerpc: Add ability to build little endian kernelsIan Munsie1-1/+2
This patch allows the kbuild system to successfully compile a kernel for the little endian PowerPC64 architecture. A subsequent patch will add the CONFIG_CPU_LITTLE_ENDIAN kernel config option which must be set to build such a kernel. If cross compiling, CROSS_COMPILE must point to a suitable toolchain (compiled for the powerpc64le-linux and powerpcle-linux targets). Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-25powerpc/zImage: make the "OF" wrapper support ePAPR bootBenjamin Herrenschmidt5-9/+33
This makes the "OF" zImage wrapper (zImage.pseries, zImage.pmac, zImage.maple) work if booted via a flat device-tree (ePAPR boot mode), and thus potentially usable with kexec. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-05Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt4-3/+4
From Anatolij: << There are cleanups for some mpc5121 specific drivers and DTS files in preparation to switch mpc5121 clock support to a clock driver based on common clock framework. Additionally Sebastian fixed the mpc52xx PIC driver so that it builds when using older gcc versions. >>
2013-08-24powerpc/85xx: Add C293PCIE board supportMingkai Hu1-0/+223
C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24powerpc/85xx: Add silicon device tree for C293Mingkai Hu2-0/+256
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24powerpc/85xx: Add SEC6.0 device treeMingkai Hu1-0/+56
Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24powerpc/85xx: Add P1023RDB board supportChunhe Lan1-0/+234
P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24dts: mpc512x: prepare for preprocessor supportGerhard Sittig4-3/+4
prepare C preprocessor support when processing MPC512x DTS files - switch from DTS syntax to CPP syntax for include specs - create a symlink such that DTS processing can reference includes Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-21powerpc: Convert some mftb/mftbu into mfsprScott Wood2-5/+8
Some CPUs (such as e500v1/v2) don't implement mftb and will take a trap. mfspr should work on everything that has a timebase, and is the preferred instruction according to ISA v2.06. Currently we get away with mftb on 85xx because the assembler converts it to mfspr due to -Wa,-me500. However, that flag has other effects that are undesireable for certain targets (e.g. lwsync is converted to sync), and is hostile to multiplatform kernels. Thus we would like to stop setting it for all e500-family builds. mftb/mftbu instances which are in 85xx code or common code are converted. Instances which will never run on 85xx are left alone. Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-14powerpc: Ignore zImage.epaprMark Brown1-0/+1
This is another file we can generate so add it to the list. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-08powerpc/85xx: add the P1020RDB-PD DTS supportHaijun.Zhang1-0/+280
Overview of P1020RDB-PD device: - DDR3 2GB - NOR flash 64MB - NAND flash 128MB - SPI flash 16MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 1 USB ports - TDM ports - PCIe Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Xie Xiaobo-R63061 <X.Xie@freescale.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-08powerpc/dts: add MPIC v4.3 dts nodeMinghuan Lian3-2/+151
For the latest platform T4 and B4, MPIC controller has been updated to v4.3. This patch adds a new file to describe the latest MPIC. The MSI blocks number is increased to four, the registers number of each block is increased to sixteen. MSIIR1 has been added to access these sixteen MSI registers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-08powerpc/fsl-booke: Rename b4qds.dts -> b4qds.dtsi.Ian Campbell3-2/+2
This file is a common include for B4860 and B4420 but is not a valid DTS itself: DTC arch/powerpc/boot/b4qds.dtb Error: arch/powerpc/boot/dts/b4qds.dts:35.1-2 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [arch/powerpc/boot/b4qds.dtb] Error 1 make: *** [b4qds.dtb] Error 2 I spotted in build tests of device-tree.git, announcement https://lkml.org/lkml/2013/4/24/209, which builds *.dts. Probably no one would do this this in real life on linux.git but it still seems worth fixing. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Shaveta Leekha <shaveta@freescale.com> Cc: Minghuan Lian <Minghuan.Lian@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-25powerpc: Add T4 LAC device tree binding & defsJoe Liccese2-0/+201
The Interlaken is a narrow, high speed channelized chip-to-chip interface. To facilitate interoperability between a data path device and a look-aside co-processor, the Interlaken Look-Aside protocol is defined for short transaction-related transfers. Although based on the Interlaken protocol, Interlaken Look-Aside is not directly compatible with Interlaken and can be considered a different operation mode. The Interlaken LA controller connects internal platform to Interlaken serial interface. It accepts LA command through software portals, which are system memory mapped 4KB spaces. The LA commands are then translated into the Interlaken control words and data words, which are sent on TX side to TCAM through SerDes lanes. Signed-off-by: Joe Liccese <joe.liccese@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-20powerpc: Update currituck pci/usb fixup for new board revisionAlistair Popple1-0/+5
The currituck board uses a different IRQ for the pci usb host controller depending on the board revision. This patch adds support for newer board revisions by retrieving the board revision from the FPGA and mapping the appropriate IRQ. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-05Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-04-30Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt33-23/+2130
From Kumar Gala: << Add support for T4 and B4 SoC families from Freescale, e6500 altivec support, some various board fixes and other minor cleanups. >>
2013-04-29powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4Kevin Hao2-0/+5
The reg property in the pci bridge device node is used to bind this device node to the pci bridge device. Then all the pci devices under this bridge could use the interrupt maps defined in this device node to do the irq translation. So if this property is missed, the pci traditional irq mechanism will not work. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-29powerpc/dts: Fix the dts for p1025rdb 36bitZhicheng Fan1-0/+5
Fix the following errors: Error: p1025rdb.dtsi:326.2-3 label or path, 'qe', not found Error: p1021si-post.dtsi:242.2-3 label or path, 'qe', not found FATAL ERROR: Syntax error parsing input tree Signed-off-by: Zhicheng Fan <B32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-12mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin1-0/+2
Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-11powerpc/85xx: Fix MPC8536DS 36-bit device treeKumar Gala1-3/+3
The localbus node should be in at 0xfffe05000 not 0xffe05000. Also fixed the names of the localbus and pci nodes to reflect the addresses they are actually at. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: Add property for 'era' in SEC dts crypto nodeVakul Garg7-0/+7
The crypto node now contains a new property 'fsl,sec-era'. This is required so that applications can retrieve era info without having to be able to read SEC's register space. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: removed qoriq-sec4.1-0.dtsi.Vakul Garg1-109/+0
Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/512x: add ifm ac14xx boardAnatolij Gustschin2-1/+393
Add dts file for ac14xx board and its board compatible string to the generic mpc512x board match list. Also add phandle to the dma DT node since there is a change (for MPC5121 SDHC DMA support) merged via linux-mmc tree with reference to the dma controller node in the sdhc node. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10powerpc/mpc512x: add platform code for MPC5125.Matteo Facchinetti3-2/+235
Tested on MPC5125 Tower evaluation board with mpc512x_defconfig compile configuration. In detail, supports for: - PSC / UART - RTC - ETH - DIU - I2C Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10powerpc/fsl-booke: Add initial B4860QDS and B4420QDS board device treeShaveta Leekha3-0/+280
B4860QDS and B4420QDS share same QDS board * common board features have been added in b4qds.dts * various board differences are in respective files of B4860 and B4420 Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420Shaveta Leekha5-0/+663
B4860 and B4420 are similar that share some commonalities * common features have been added in b4si-pre.dtsi and b4si-post.dtsi * differences are added in respective silicon files of B4860 and B4420 There are several things missing from the device trees of B4860 and B4420: * DPAA related nodes (Qman, Bman, Fman, Rman) * DSP related nodes/information * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, quad timers nodes Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-09powerpc/fsl-booke: Minor fixes to T4240 Si device treeKumar Gala2-13/+13
* Fix cpu unit address to match reg * Update compatible for rcpm & clockgen to be 2.0 instead of 2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-03powerpc/85xx: add SEC-5.3 device treeShaveta Leekha1-0/+118
Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-18powerpc/fsl-booke: Update T4240 device config node in device treeKumar Gala1-1/+1
As the T4240 is based on corenet chassis v2.0 spec we update the global utilities (GUTS) device config compatiable to reflect this. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-18powerpc/fsl-booke: Update DCSR EPU device tree entries for existing SoCsStephen George5-5/+5
Identifies the epu as compatible with Chassis v1 Debug IP. Signed-off-by: Stephen George <Stephen.George@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-18powerpc/fsl-booke: Added device tree DCSR entries for T4240 Chassis v2 Debug IPStephen George3-12/+148
Signed-off-by: Stephen George <Stephen.George@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-13powerpc/85xx: Reserve a partition of NOR flash for QE ucode firmwareJiucheng Xu1-2/+10
Due to the partition of JFFS2 overlaps with QE ucode firmware, So JFFS2 will break QE ucode. Shrink JFFS2's partition to reserve the space of QE ucode firmware. Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-13powerpc/85xx: Add first usb controller node for Qonverge platformsRamneek Mehresh1-0/+41
Add first usb controller node for qonverge qoriq platforms like B4860, etc Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-13powerpc/fsl-booke: Add initial T4240QDS board device treeKumar Gala1-0/+220
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-13powerpc/fsl-booke: Add initial silicon device tree for T4240Kumar Gala5-0/+557
Enable a baseline T4240 SoC to boot. There are several things missing from the device trees for T4240: * Proper PAMU topology information * DPAA related nodes (Qman, Bman, Fman, Rman, DCE) * Prefetch Manager * Thermal monitor unit * Interlaken Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-06powerpc/85xx: Added SEC-5.0 device tree.Vakul Garg1-0/+109
Add device tree for SEC (crypto engine) version 5.0 used on T4240. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-06powerpc: add missing deo arch category to e500mc/e5500 dtsStuart Yoder2-0/+2
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-06powerpc/e6500: Add architecture categories for e6500 coresStuart Yoder1-0/+65
-also define a binding for fsl,eref-* properties Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-18 01:34:19 +0300