summaryrefslogtreecommitdiff
path: root/arch/parisc/kernel/setup.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23Merge branch 'parisc-4.20-1' of ↵Linus Torvalds1-0/+81
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Lots of small fixes and enhancements, most noteably: - Many TLB and cache flush optimizations (Dave) - Fixed HPMC/crash handler on 64-bit kernel (Dave and myself) - Added alternative infrastructre. The kernel now live-patches itself for various situations, e.g. replace SMP code when running on one CPU only or drop cache flushes when system has no cache installed. - vmlinuz now contains a full copy of the compressed vmlinux file. This simplifies debugging the currently booted kernel. - Unused driver removal (Christoph) - Reduced warnings of Dino PCI bridge when running in qemu - Removed gcc version check (Masahiro)" * 'parisc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (23 commits) parisc: Retrieve and display the PDC PAT capabilities parisc: Optimze cache flush algorithms parisc: Remove pte_inserted define parisc: Add PDC PAT cell_info() and pd_get_pdc_revisions() functions parisc: Drop two instructions from pte lookup code parisc: Use zdep for shlw macro on PA1.1 and PA2.0 parisc: Add alternative coding infrastructure parisc: Include compressed vmlinux file in vmlinuz boot kernel extract-vmlinux: Check for uncompressed image as fallback parisc: Fix address in HPMC IVA parisc: Fix exported address of os_hpmc handler parisc: Fix map_pages() to not overwrite existing pte entries parisc: Purge TLB entries after updating page table entry and set page accessed flag in TLB handler parisc: Release spinlocks using ordered store parisc: Ratelimit dino stuck interrupt warnings parisc: dino: Utilize DINO_MASK_IRQ() macro parisc: Clean up crash header output parisc: Add SYSTEM_INFO and REGISTER TOC PAT functions parisc: Remove PTE load and fault check from L2_ptep macro parisc: Reorder TLB flush timing calculation ...
2018-10-17parisc: Add alternative coding infrastructureHelge Deller1-0/+81
This patch adds the necessary code to patch a running kernel at runtime to improve performance. The current implementation offers a few optimizations variants: - When running a SMP kernel on a single UP processor, unwanted assembler statements like locking functions are overwritten with NOPs. When multiple instructions shall be skipped, one branch instruction is used instead of multiple nop instructions. - In the UP case, some pdtlb and pitlb instructions are patched to become pdtlb,l and pitlb,l which only flushes the CPU-local tlb entries instead of broadcasting the flush to other CPUs in the system and thus may improve performance. - fic and fdc instructions are skipped if no I- or D-caches are installed. This should speed up qemu emulation and cacheless systems. - If no cache coherence is needed for IO operations, the relevant fdc and sync instructions in the sba and ccio drivers are replaced by nops. - On systems which share I- and D-TLBs and thus don't have a seperate instruction TLB, the pitlb instruction is replaced by a nop. Live-patching is done early in the boot process, just after having run the system inventory. No drivers are running and thus no external interrupts should arrive. So the hope is that no TLB exceptions will occur during the patching. If this turns out to be wrong we will probably need to do the patching in real-mode. Signed-off-by: Helge Deller <deller@gmx.de>
2018-09-20dma-mapping: merge direct and noncoherent opsChristoph Hellwig1-1/+1
All the cache maintainance is already stubbed out when not enabled, but merging the two allows us to nicely handle the case where cache maintainance is required for some devices, but not others. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
2018-08-13parisc: use generic dma_noncoherent_opsChristoph Hellwig1-1/+1
Switch to the generic noncoherent direct mapping implementation. Fix sync_single_for_cpu to do skip the cache flush unless the transfer is to the device to match the more tested unmap_single path which should have the same cache coherency implications. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: merge pcx_dma_ops and pcxl_dma_opsChristoph Hellwig1-5/+3
The only difference is that pcxl supports dma coherent allocations, while pcx only supports non-consistent allocations and otherwise fails. But dma_alloc* is not in the fast path, and merging these two allows an easy migration path to the generic dma-noncoherent implementation, so do it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-07PCI: remove PCI_DMA_BUS_IS_PHYSChristoph Hellwig1-5/+0
This was used by the ide, scsi and networking code in the past to determine if they should bounce payloads. Now that the dma mapping always have to support dma to all physical memory (thanks to swiotlb for non-iommu systems) there is no need to this crude hack any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv) Reviewed-by: Jens Axboe <axboe@kernel.dk>
2017-11-17parisc: Add CPU topology supportHelge Deller1-0/+2
Add topology support, including multi-core scheduler support on PA8800/PA8900 CPUs and enhanced output in /proc/cpuinfo, e.g. lscpu now reports on a single-socket, dual-core machine: Architecture: parisc64 CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 CPU family: PA-RISC 2.0 Model name: PA8800 (Mako) Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Move init_per_cpu() into init sectionHelge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2017-09-22parisc: Move start_parisc() into init sectionHelge Deller1-2/+2
Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-20sched/clock: Fix hotplug crashPeter Zijlstra1-0/+2
Mike reported that he could trigger the WARN_ON_ONCE() in set_sched_clock_stable() using hotplug. This exposed a fundamental problem with the interface, we should never mark the TSC stable if we ever find it to be unstable. Therefore set_sched_clock_stable() is a broken interface. The reason it existed is that not having it is a pain, it means all relevant architecture code needs to call clear_sched_clock_stable() where appropriate. Of the three architectures that select HAVE_UNSTABLE_SCHED_CLOCK ia64 and parisc are trivial in that they never called set_sched_clock_stable(), so add an unconditional call to clear_sched_clock_stable() to them. For x86 the story is a lot more involved, and what this patch tries to do is ensure we preserve the status quo. So even is Cyrix or Transmeta have usable TSC they never called set_sched_clock_stable() so they now get an explicit mark unstable. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9881b024b7d7 ("sched/clock: Delay switching sched_clock to stable") Link: http://lkml.kernel.org/r/20170119133633.GB6536@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-25parisc: Fix races in parisc_setup_cache_timing()John David Anglin1-0/+4
Helge reported to me the following startup crash: [ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13) [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 9000/785/J5000 [ 0.000000] Total Memory: 2048 MB [ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) [ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB) [ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB) [ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB) [ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB) [ 0.768910] Brought up 1 CPUs [ 0.992465] NET: Registered protocol family 16 [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 [ 3.000419] _______________________________ [ 3.000419] < Your System ate a SPARC! Gah! > [ 3.000419] ------------------------------- [ 3.000419] \ ^__^ [ 3.000419] (__)\ )\/\ [ 3.000419] U ||----w | [ 3.000419] || || [ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000 [ 9.528040] [ 10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158 [ 10.868052] IIR: 43ffff80 ISR: 0000000000340000 IOR: 000001ff54150960 [ 10.960029] CPU: 1 CR30: 00000000bfd50000 CR31: 0000000011111111 [ 11.052057] ORIG_R28: 000000004021e3b4 [ 11.100045] IAOQ[0]: irq_exit+0x94/0x120 [ 11.152062] IAOQ[1]: irq_exit+0x98/0x120 [ 11.208031] RP(r2): irq_exit+0xb8/0x120 [ 11.256074] Backtrace: [ 11.288067] [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598 [ 11.368058] [<0000000040109528>] smp_callin+0x2c0/0x2f0 [ 11.436308] [<00000000402b53fc>] update_curr+0x18c/0x2d0 [ 11.508055] [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030 [ 11.584040] [<00000000402b3cc0>] set_next_entity+0x80/0xd30 [ 11.660069] [<00000000402c1594>] pick_next_task_fair+0x614/0x720 [ 11.740085] [<000000004020dd34>] __schedule+0x394/0xa60 [ 11.808054] [<000000004020e488>] schedule+0x88/0x118 [ 11.876039] [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0 [ 11.948090] [<000000004028fc4c>] kthread+0x1ec/0x248 [ 12.016053] [<0000000040205020>] end_fault_vector+0x20/0xc0 [ 12.092239] [<00000000402050c0>] _switch_to_ret+0x0/0xf40 [ 12.164044] [ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 12.244040] Backtrace: [ 12.244040] [<000000004021c480>] show_stack+0x68/0x80 [ 12.244040] [<00000000406f332c>] dump_stack+0xec/0x168 [ 12.244040] [<000000004021c74c>] die_if_kernel+0x25c/0x430 [ 12.244040] [<000000004022d320>] handle_unaligned+0xb48/0xb50 [ 12.244040] [ 12.632066] ---[ end trace 9ca05a7215c7bbb2 ]--- [ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task! We have the insn 0x43ffff80 in IIR but from IAOQ we should have: 4025d150: 0f f3 20 df ldd,s r19(r31),r31 4025d154: 0f 9f 00 9c ldw r31(ret0),ret0 4025d158: bf 80 20 58 cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc> Cpu0 has just completed running parisc_setup_cache_timing: [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 From the backtrace, cpu1 is in smp_callin: void __init smp_callin(void) { int slave_id = cpu_now_booting; smp_cpu_init(slave_id); preempt_disable(); flush_cache_all_local(); /* start with known state */ flush_tlb_all_local(NULL); local_irq_enable(); /* Interrupts have been off until now */ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); So, it has just flushed its caches and the TLB. It would seem either the flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel memory. The attached patch reworks parisc_setup_cache_timing to remove the races in setting the cache and TLB flush thresholds. It also corrects the number of bytes flushed in the TLB calculation. The patch flushes the cache and TLB on cpu0 before starting the secondary processors so that they are started from a known state. Tested with a few reboots on c8000. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-07parisc: Increase KERNEL_INITIAL_SIZE for 32-bit SMP kernelsHelge Deller1-0/+8
Increase the initial kernel default page mapping size for SMP kernels to 32MB and add a runtime check which panics early if the kernel is bigger than the initial mapping size. This fixes boot crashes of 32bit SMP kernels. Due to the introduction of huge page support in kernel 4.4 and it's required initial kernel layout in memory, a 32bit SMP kernel usually got bigger (in layout, not size) than 16MB. Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Helge Deller <deller@gmx.de>
2015-11-22parisc: Add Huge Page and HUGETLBFS supportHelge Deller1-1/+10
This patch adds huge page support to allow userspace to allocate huge pages and to use hugetlbfs filesystem on 32- and 64-bit Linux kernels. A later patch will add kernel support to map kernel text and data on huge pages. The only requirement is, that the kernel needs to be compiled for a PA8X00 CPU (PA2.0 architecture). Older PA1.X CPUs do not support variable page sizes. 64bit Kernels are compiled for PA2.0 by default. Technically on parisc multiple physical huge pages may be needed to emulate standard 2MB huge pages. Signed-off-by: Helge Deller <deller@gmx.de>
2015-11-22parisc: Initialize the fault vector earlier in the boot process.Helge Deller1-0/+3
A fault vector on parisc needs to be 2K aligned. Furthermore the checksum of the fault vector needs to sum up to 0 which is being calculated and written at runtime. Up to now we aligned both PA20 and PA11 fault vectors on the same 4K page in order to easily write the checksum after having mapped the kernel read-only (by mapping this page only as read-write). But when we want to map the kernel text and data on huge pages this makes things harder. So, simplify it by aligning both fault vectors on 2K boundries and write the checksum before we map the page read-only. Signed-off-by: Helge Deller <deller@gmx.de>
2013-11-08parisc: correctly display number of active CPUsHelge Deller1-2/+6
In case we fail to power up other CPUs in a SMP system, the kernel currently shows a wrong number of online CPUs. This change makes the output more verbose on how many of the CPUs are online. Example: CPU(s): 1 out of 2 PA8800 (Mako) at 900.000000 MHz online. Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-09Merge 3.10-rc5 into tty-nextGreg Kroah-Hartman1-1/+2
2013-06-01parisc: kernel: using strlcpy() instead of strcpy()Chen Gang1-1/+2
'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-21TTY:vt: convert remain take_over_console's users to do_take_over_consoleWang YanQing1-1/+1
Impact: 1:convert all remain take_over_console to do_take_over_console 2:update take_over_console to do_take_over_console in comment Commit dc9641895abb ("vt: delete unneeded functions register_con_driver|take_over_console") delete take_over_console, but forget to convert remain take_over_console's users to new API do_take_over_console, this patch fix it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07parisc: fix partly 16/64k PAGE_SIZE bootHelge Deller1-0/+2
This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the assembler PTE lookup code and the assembler TEMPALIAS code. Furthermore some data alignments for PAGE_SIZE have been limited to 4K (or less) to not waste too much memory with greater page sizes. As a side note, the palo loader can (currently) only handle up to 10 ELF segments which is fixed with tighter aligning as well. My testings indicated that the ldci command in the sba iommu coding needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page size was only set to 4K for my machine (C3000). All this fixes partly the boot, but there are still quite some caching problems left. Examples are e.g. the symbios logic driver which is failing: sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED. and the tulip network driver which doesn't seem to work correctly either: Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1 link partner capability of 05e1 ..... timed out! Beside those kernel fixes glibc will need fixes too to be able to handle >4K page sizes. Signed-off-by: Helge Deller <deller@gmx.de>
2011-11-01parisc: Add export.h to files needing EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker1-0/+1
These guys were getting it implicitly via module.h before, when module.h was everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2009-07-03parisc: remove CVS keywordsAlexander Beregalov1-2/+1
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-01-05parisc: Replace NR_CPUS in parisc codeHelge Deller1-3/+3
parisc: Replace most arrays sized by NR_CPUS with percpu variables. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-01-05parisc: remove dead BIO_VMERGE_BOUNDARY and BIO_VMERGE_MAX_SIZE definitionsFUJITA Tomonori1-5/+0
The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY and BIO_VMERGE_MAX_SIZE definitions are meaningless now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-10-10parisc: initialize unwinder much earlierJames Bottomley1-0/+2
The unwinder was being initialized way too late to be any use debugging early boot crashes. Instead of relying on module_init initcalls to initialize it, let's do it explicitly as early as we can. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-10-10parisc: hijack jump to start_kernelKyle McMartin1-1/+26
Bang in our own start_parisc call, which initializes the PDC width, and turns on the FPU. Previously, if CONFIG_PRINTK_TIME was on, we'd attempt to use the FPU before we had enabled it, resulting in a difficult to diagnose panic. This patch causes init_per_cpu to redundantly set these for cpu0, but this is harmless.
2008-02-08procfs: constify function pointer tablesJan Engelhardt1-1/+1
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23[PARISC] spelling fixes: arch/parisc/Simon Arlott1-1/+1
Spelling fixes in arch/parisc/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-05-23[PARISC] Let PA-8900 processors bootKyle McMartin1-0/+1
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-05-23parisc: make command_line[] staticAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-27[PARISC] Remove __read_mostly annotation from command_lineKyle McMartin1-1/+1
Who cares if it's in the read mostly section when it's going to be discarded anyway? Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds1-3/+3
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits) [PARISC] Use symbolic last syscall in __NR_Linux_syscalls [PARISC] Add missing statfs64 and fstatfs64 syscalls Revert "[PARISC] Optimize TLB flush on SMP systems" [PARISC] Compat signal fixes for 64-bit parisc [PARISC] Reorder syscalls to match unistd.h Revert "[PATCH] make kernel/signal.c:kill_proc_info() static" [PARISC] fix sys_rt_sigqueueinfo [PARISC] fix section mismatch warnings in harmony sound driver [PARISC] do not export get_register/set_register [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code [PARISC] convert to use CONFIG_64BIT instead of __LP64__ [PARISC] use CONFIG_64BIT instead of __LP64__ [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro [PARISC] more ENTRY(), ENDPROC(), END() conversions [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc [PARISC] Fixes /proc/cpuinfo cache output on B160L [PARISC] implement standard ENTRY(), END() and ENDPROC() [PARISC] kill ENTRY_SYS_CPUS [PARISC] clean up debugging printks in smp.c [PARISC] factor syscall_restart code out of do_signal ... Fix conflict in include/linux/sched.h due to kill_proc_info() being made publicly available to PARISC again.
2007-02-17[PARISC] use CONFIG_64BIT instead of __LP64__Helge Deller1-3/+3
- additionally update my copyright timestamps Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-12[PATCH] Dynamic kernel command-line: pariscAlon Bar-Lev1-4/+4
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-28[PARISC] OS_ID_LINUX == 0x0006Kyle McMartin1-1/+1
We were assigned an OS_ID of 0x0006. Consistently use OS_ID_LINUX instead of using the magic number. Also update the OS_ID_ defines in asm/pdc.h to reflect this. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-28[PARISC] pdc_stable version 0.30Thibaut Varene1-0/+5
pdc_stable v0.30: This patch introduces 3 more files to the /sys/firmware/stable tree: - diagnostic, which contains a cryptic hex string - osdep1, a 16 bytes os-dependent storage area always available - osdep2, another os-dependent storage area which existence/size depends on hversion. This patch also adds code to setup the "Linux" signature in stable storage. That is to say that starting with this patch, the kernel will now sign its OSID (0x0006, thx LaMont) in Stable Storage upon boot, whether pdc_stable is enabled or not. Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-11[PARISC] Add __read_mostly section for pariscHelge Deller1-5/+5
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-04-17Linux-2.6.12-rc2Linus Torvalds1-0/+368
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 17:15:06 +0300