summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2014-04-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds7-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq code updates from Thomas Gleixner: "The irq department proudly presents: - Another tree wide sweep of irq infrastructure abuse. Clear winner of the trainwreck engineering contest was: #include "../../../kernel/irq/settings.h" - Tree wide update of irq_set_affinity() callbacks which miss a cpu online check when picking a single cpu out of the affinity mask. - Tree wide consolidation of interrupt statistics. - Updates to the threaded interrupt infrastructure to allow explicit wakeup of the interrupt thread and a variant of synchronize_irq() which synchronizes only the hard interrupt handler. Both are needed to replace the homebrewn thread handling in the mmc/sdhci code. - New irq chip callbacks to allow proper support for GPIO based irqs. The GPIO based interrupts need to request/release GPIO resources from request/free_irq. - A few new ARM interrupt chips. No revolutionary new hardware, just differently wreckaged variations of the scheme. - Small improvments, cleanups and updates all over the place" I was hoping that that trainwreck engineering contest was a April Fools' joke. But no. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) irqchip: sun7i/sun6i: Disable NMI before registering the handler ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller ARM: sun7i/sun6i: irqchip: Update the documentation ARM: sun7i/sun6i: dts: Add NMI irqchip support ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller genirq: Export symbol no_action() arm: omap: Fix typo in ams-delta-fiq.c m68k: atari: Fix the last kernel_stat.h fallout irqchip: sun4i: Simplify sun4i_irq_ack irqchip: sun4i: Use handle_fasteoi_irq for all interrupts genirq: procfs: Make smp_affinity values go+r softirq: Add linux/irq.h to make it compile again m68k: amiga: Add linux/irq.h to make it compile again irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0 irqchip: sun4i: Fix a comment about mask register initialization irqchip: sun4i: Fix irq 0 not working genirq: Add a new IRQCHIP_EOI_THREADED flag genirq: Document IRQCHIP_ONESHOT_SAFE flag ARM: sunxi: dt: Convert to the new irq controller compatibles irqchip: sunxi: Change compatibles ...
2014-04-01Merge branch 'compat' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 compat wrapper rework from Heiko Carstens: "S390 compat system call wrapper simplification work. The intention of this work is to get rid of all hand written assembly compat system call wrappers on s390, which perform proper sign or zero extension, or pointer conversion of compat system call parameters. Instead all of this should be done with C code eg by using Al's COMPAT_SYSCALL_DEFINEx() macro. Therefore all common code and s390 specific compat system calls have been converted to the COMPAT_SYSCALL_DEFINEx() macro. In order to generate correct code all compat system calls may only have eg compat_ulong_t parameters, but no unsigned long parameters. Those patches which change parameter types from unsigned long to compat_ulong_t parameters are separate in this series, but shouldn't cause any harm. The only compat system calls which intentionally have 64 bit parameters (preadv64 and pwritev64) in support of the x86/32 ABI haven't been changed, but are now only available if an architecture defines __ARCH_WANT_COMPAT_SYS_PREADV64/PWRITEV64. System calls which do not have a compat variant but still need proper zero extension on s390, like eg "long sys_brk(unsigned long brk)" will get a proper wrapper function with the new s390 specific COMPAT_SYSCALL_WRAPx() macro: COMPAT_SYSCALL_WRAP1(brk, unsigned long, brk); which generates the following code (simplified): asmlinkage long sys_brk(unsigned long brk); asmlinkage long compat_sys_brk(long brk) { return sys_brk((u32)brk); } Given that the C file which contains all the COMPAT_SYSCALL_WRAP lines includes both linux/syscall.h and linux/compat.h, it will generate build errors, if the declaration of sys_brk() doesn't match, or if there exists a non-matching compat_sys_brk() declaration. In addition this will intentionally result in a link error if somewhere else a compat_sys_brk() function exists, which probably should have been used instead. Two more BUILD_BUG_ONs make sure the size and type of each compat syscall parameter can be handled correctly with the s390 specific macros. I converted the compat system calls step by step to verify the generated code is correct and matches the previous code. In fact it did not always match, however that was always a bug in the hand written asm code. In result we get less code, less bugs, and much more sanity checking" * 'compat' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits) s390/compat: add copyright statement compat: include linux/unistd.h within linux/compat.h s390/compat: get rid of compat wrapper assembly code s390/compat: build error for large compat syscall args mm/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types net/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types ipc/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types fs/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types ipc/compat: convert to COMPAT_SYSCALL_DEFINE fs/compat: convert to COMPAT_SYSCALL_DEFINE security/compat: convert to COMPAT_SYSCALL_DEFINE mm/compat: convert to COMPAT_SYSCALL_DEFINE net/compat: convert to COMPAT_SYSCALL_DEFINE kernel/compat: convert to COMPAT_SYSCALL_DEFINE fs/compat: optional preadv64/pwrite64 compat system calls ipc/compat_sys_msgrcv: change msgtyp type from long to compat_long_t s390/compat: partial parameter conversion within syscall wrappers s390/compat: automatic zero, sign and pointer conversion of syscalls s390/compat: add sync_file_range and fallocate compat syscalls ...
2014-03-31Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Bigger changes: - sched/idle restructuring: they are WIP preparation for deeper integration between the scheduler and idle state selection, by Nicolas Pitre. - add NUMA scheduling pseudo-interleaving, by Rik van Riel. - optimize cgroup context switches, by Peter Zijlstra. - RT scheduling enhancements, by Thomas Gleixner. The rest is smaller changes, non-urgnt fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) sched: Clean up the task_hot() function sched: Remove double calculation in fix_small_imbalance() sched: Fix broken setscheduler() sparc64, sched: Remove unused sparc64_multi_core sched: Remove unused mc_capable() and smt_capable() sched/numa: Move task_numa_free() to __put_task_struct() sched/fair: Fix endless loop in idle_balance() sched/core: Fix endless loop in pick_next_task() sched/fair: Push down check for high priority class task into idle_balance() sched/rt: Fix picking RT and DL tasks from empty queue trace: Replace hardcoding of 19 with MAX_NICE sched: Guarantee task priority in pick_next_task() sched/idle: Remove stale old file sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED cpuidle/arm64: Remove redundant cpuidle_idle_call() cpuidle/powernv: Remove redundant cpuidle_idle_call() sched, nohz: Exclude isolated cores from load balancing sched: Fix select_task_rq_fair() description comments workqueue: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE ...
2014-03-31Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The biggest change is the MCS spinlock generalization changes from Tim Chen, Peter Zijlstra, Jason Low et al. There's also lockdep fixes/enhancements from Oleg Nesterov, in particular a false negative fix related to lockdep_set_novalidate_class() usage" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) locking/mutex: Fix debug checks locking/mutexes: Add extra reschedule point locking/mutexes: Introduce cancelable MCS lock for adaptive spinning locking/mutexes: Unlock the mutex without the wait_lock locking/mutexes: Modify the way optimistic spinners are queued locking/mutexes: Return false if task need_resched() in mutex_can_spin_on_owner() locking: Move mcs_spinlock.h into kernel/locking/ m68k: Skip futex_atomic_cmpxchg_inatomic() test futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test Revert "sched/wait: Suppress Sparse 'variable shadowing' warning" lockdep: Change lockdep_set_novalidate_class() to use _and_name lockdep: Change mark_held_locks() to check hlock->check instead of lockdep_no_validate lockdep: Don't create the wrong dependency on hlock->check == 0 lockdep: Make held_lock->check and "int check" argument bool locking/mcs: Allow architecture specific asm files to be used for contended case locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order sched/wait: Suppress Sparse 'variable shadowing' warning hung_task/Documentation: Fix hung_task_warnings description locking/mcs: Allow architectures to hook in to contended paths locking/mcs: Micro-optimize the MCS code, add extra comments ...
2014-03-20MIPS: Make local_irq_disable macro safe for non-Mipsr2Jim Quinlan1-0/+11
For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [ralf@linux-mips.org: This patch is sorting out the part that were missed by e97c5b6098 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of <asm/asm-offsets.h> at the top of <asm/asmmacro.h>]. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-20MIPS: Octeon: Fix warning in of_device_alloc on cn3xxxAndreas Herrmann1-10/+12
Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Reported-by: Yang Wei <wei.yang@windriver.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-20MIPS: ftrace: Tweak safe_load()/safe_store() macrosViller Hsiao1-10/+10
Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a4671094 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao <villerhsiao@gmail.com> Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-19MIPS: BCM47XX: Check all (32) GPIOs when looking for a pinRafał Miłecki1-1/+1
Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Rafał Miłecki <zajec5@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-18MIPS: Fix possible build error with transparent hugepages enabledAlex Smith1-6/+6
If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-17MIPS: mark O32+FP64 experimental for nowPaul Burton1-3/+9
Commit 597ce1723e0f "MIPS: Support for 64-bit FP with O32 binaries" introduced support for setting Status.FR=1 for O32 binaries with the EF_MIPS_FP64 ELF header flag set. Whilst this flag is currently supported by binutils it does introduce an ABI break within userland. Objects built with EF_MIPS_FP64 cannot be safely linked with those built without it since code in either object may assume behaviour specific to a value of FR. More recently there has been discussion around avoiding further fragmentation of the O32 ABI whilst still allowing the use of FR=1 and features such as MSA which depend upon it. Details of the plan to allow this are still being worked on, and whilst the kernel will need the ability to handle FR=1 with O32 tasks it is unclear what else it may need to provide to a userland which seeks to avoid another ABI break. In order to prevent the proliferation of userland which may rely upon the current EF_MIPS_FP64 behaviour this patch marks the kernel support for it experimental & disables it by default. Under current proposals it is likely that this support can simply be enabled again later, but possibly after the introduction of further interfaces with userland and support for the MIPS R5 UFR feature. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6549/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-17MIPS: ftrace: Fix icache flush range errorViller Hsiao1-3/+2
In 32-bit mode, the start address passed to flush_icache_range is shifted by 4 bytes before the second safe_store_code() call. This causes system crash from time to time because the first 4 bytes might not be flushed properly. This bug exists since linux-3.8. Also remove obsoleted comment while at it. Signed-off-by: Viller Hsiao <villerhsiao@gmail.com> Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6586/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-17MIPS: Fix syscall tracing interfaceLars Persson1-2/+2
Fix pointer computation for stack-based arguments. Signed-off-by: Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6620/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-17MIPS: asm: syscall: Fix copying system call argumentsMarkos Chandras1-2/+1
The syscall_get_arguments function expects the arguments to be copied to the '*args' argument but instead a local variable was used to hold the system call argument. As a result of which, this variable was never passed to the filter and any filter testing the system call arguments would fail. This is fixed by passing the '*args' variable as the destination memory for the system call arguments. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6402/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-15MIPS: Octeon: Fix fall through on bar type OCTEON_DMA_BAR_TYPE_SMALLColin Ian King1-0/+1
Bar type OCTEON_DMA_BAR_TYPE_SMALL assigns lo and hi addresses and then falls through to OCTEON_DMA_BAR_TYPE_BIG that re-assignes lo and hi addresses with totally different values. Add a break so we don't fall through. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-14MIPS: FPU: Fix conflict of register usageHuacai Chen1-4/+4
In _restore_fp_context/_restore_fp_context32, t0 is used for both CP0_Status and CP1_FCSR. This is a mistake and cause FP exeception on boot, so fix it. Signed-off-by: Huacai Chen <chenhc@lemote.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Andreas Barth <aba@ayous.org> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-14MIPS: Replace CONFIG_MIPS64 and CONFIG_MIPS32_R2Paul Bolle3-7/+7
Commit 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries") introduced references to two undefined Kconfig macros. CONFIG_MIPS32_R2 should clearly be replaced with CONFIG_CPU_MIPS32_R2. And CONFIG_MIPS64 should be replaced with CONFIG_64BIT. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6522/ Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-12mips: Validate online cpus in irq_set_affinity() callbacksThomas Gleixner2-2/+2
The [user space] interface does not filter out offline cpus. It merily guarantees that the mask contains at least one online cpu. So the selector in the irq chip implementation needs to make sure to pick only an online cpu because otherwise: Offline Core 1 Set affinity to 0xe (is valid due to online mask 0xd) cpumask_first will pick core 1, which is offline Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20140304203100.744800502@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-12MIPS: math-emu: Fix prefx detection and COP1X function field definitionDeng-Cheng Zhu2-5/+5
When running applications which contain the instruction "prefx" on FPU-less CPUs, a message "Illegal instruction" will be seen. This instruction is supposed to be ignored by the FPU emulator. However, its current detection and function field encoding are incorrect. This patch fix the issue. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Steven.Hill@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6608/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-11sched: Remove unused mc_capable() and smt_capable()Bjorn Helgaas1-4/+0
Remove mc_capable() and smt_capable(). Neither is used. Both were added by 5c45bf279d37 ("sched: mc/smt power savings sched policy"). Uses of both were removed by 8e7fbcbc22c1 ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: http://lkml.kernel.org/r/20140304210737.16893.54289.stgit@bhelgaas-glaptop.roam.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-07MIPS: APRP: Choose the correct VPE loader by fixing the linkingDeng-Cheng Zhu1-1/+1
Now we have CONFIG_MIPS_VPE_LOADER and CONFIG_MIPS_VPE_LOADER_[CMP|MT]. The latter two are used by the 2 exclusive flavors. The vpe_run in malta-amon.c is for CMP APRP. Without the fix, this vpe_run will be used in MT APRP. Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Patchwork: https://patchwork.linux-mips.org/patch/6589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-06MIPS: APRP: Unregister rtlx interrupt hook at module exitDeng-Cheng Zhu2-0/+6
If the aprp_hook is not assigned back to NULL, it will still be called after module exits. This is not wanted. Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Patchwork: https://patchwork.linux-mips.org/patch/6590/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-06MIPS: APRP: Fix the linking of rtlx interrupt hookDeng-Cheng Zhu1-2/+2
There are 2 errors with the existing aprp_hook linking: - The prefix CONFIG_ is missing; - The hook should be linked exclusively in the cases of MT and CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Patchwork: https://patchwork.linux-mips.org/patch/6588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-06MIPS: bcm47xx: Include missing errno.h for ENXIOMarkos Chandras1-0/+1
Fixes the following build problen on allmodconfig: arch/mips/bcm47xx/board.c: In function 'bcm47xx_board_detect': arch/mips/bcm47xx/board.c:291:14: error: 'ENXIO' undeclared (first use in this function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6571/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-06MIPS: Alchemy: Fix unchecked kstrtoul return valueManuel Lauss2-6/+2
enabled __must_check logic triggers a build error for mtx1 and gpr in the prom init code. Fix by checking the kstrtoul() return value. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/6574/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-06MIPS: Fix randconfig build error.Ralf Baechle1-0/+3
CC arch/mips/kernel/ptrace.o In file included from arch/mips/kernel/ptrace.c:42:0: arch/mips/kernel/ptrace.c: In function ‘mips_get_syscall_arg’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/syscall.h:60:1: error: control reaches end of non-void function [-Werror=return-type] cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/ptrace.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Fixed by marking the end of mips_get_syscall_arg() as unreachable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-04mips: Use the core irq stats functionThomas Gleixner5-5/+5
Let the core do the irq_desc resolution. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: mips <inux-mips@linux-mips.org> Link: http://lkml.kernel.org/r/20140223212737.517340416@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04compat: let architectures define __ARCH_WANT_COMPAT_SYS_GETDENTS64Heiko Carstens1-1/+0
For architecture dependent compat syscalls in common code an architecture must define something like __ARCH_WANT_<WHATEVER> if it wants to use the code. This however is not true for compat_sys_getdents64 for which architectures must define __ARCH_OMIT_COMPAT_SYS_GETDENTS64 if they do not want the code. This leads to the situation where all architectures, except mips, get the compat code but only x86_64, arm64 and the generic syscall architectures actually use it. So invert the logic, so that architectures actively must do something to get the compat code. This way a couple of architectures get rid of otherwise dead code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-02-10locking/mcs: Allow architecture specific asm files to be used for contended caseTim Chen1-0/+1
This patch allows each architecture to add its specific assembly optimized arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for MCS lock and unlock functions. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: George Spelvin <linux@horizon.com> Cc: Rik vanRiel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: MichelLespinasse <walken@google.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESK Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-10locking/mcs: Order the header files in Kbuild of each architecture in ↵Tim Chen1-2/+2
alphabetical order We perform a clean up of the Kbuid files in each architecture. We order the files in each Kbuild in alphabetical order by running the below script. for i in arch/*/include/asm/Kbuild do cat $i | gawk '/^generic-y/ { i = 3; do { for (; i <= NF; i++) { if ($i == "\\") { getline; i = 1; continue; } if ($i != "") hdr[$i] = $i; } break; } while (1); next; } // { print $0; } END { n = asort(hdr); for (i = 1; i <= n; i++) print "generic-y += " hdr[i]; }' > ${i}.sorted; mv ${i}.sorted $i; done Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: George Spelvin <linux@horizon.com> Cc: MichelLespinasse <walken@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> [ Fixed build bug. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-06MIPS: fpu.h: Fix build when CONFIG_BUG is not setAaro Koskinen1-0/+2
__enable_fpu produces a build failure when CONFIG_BUG is not set: In file included from arch/mips/kernel/cpu-probe.c:24:0: arch/mips/include/asm/fpu.h: In function '__enable_fpu': arch/mips/include/asm/fpu.h:77:1: error: control reaches end of non-void function [-Werror=return-type] This is regression introduced in 3.14-rc1. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Paul Burton <paul.burton@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-02-04MIPS: Wire up sched_setattr/sched_getattr syscallsJames Hogan5-6/+20
Wire up for MIPS the new sched_setattr and sched_getattr system calls added in commit d50dde5a10f3 (sched: Add new scheduler syscalls to support an extended scheduling parameters ABI) merged in v3.14-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6502/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-02-04MIPS: Alchemy: Fix DB1100 GPIO registrationManuel Lauss1-5/+2
With CONFIG_GPIOLIB=y gpios need to be requested before they can be modified. Request the SD carddetect pins, and drop the SPI direction setup, as the driver does that for us anyway. This gets rid of a lot of WARN_ON()s triggered by GPIO core, and restores functionality of the touschreen controller. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/6497/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds215-3287/+6077
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-0/+13
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-25Merge branch 'for-linus' of ↵Linus Torvalds2-30/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespaces work from Eric Biederman: "The work to convert the kernel to use kuid_t and kgid_t has been finished since 3.12 so it is time to remove the scaffolding that allowed the work to progress incrementally. The first patch on this branch just removes the scaffolding, ensuring we will always get compile errors if people accidentally try the userspace and the kernel uid and gid types. The second patch an overlooked and unused chunk of mips code that that fails to build after the first patch. The code hasn't been in linux-next for long (as I was out of it and could not sheppared the cold properly) but the patch has been around for a long time just waiting for the day when I had finished the uid/gid conversions. Putting the code in linux-next did find the compile failure on mips so I took the time to get that fix reviewed and included. Beyond that I am not too worried about errors because all these two patches do is delete a modest amount of code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: MIPS: VPE: Remove vpe_getuid and vpe_getgid userns: userns: Remove UIDGID_STRICT_TYPE_CHECKS
2014-01-25Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Just a swath of driver fixes and cleanups, no new drivers this time (although ALPS now supports one of the newer protocols, more to come)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: wacom - add support for DTU-1031 Input: wacom - fix wacom->shared guards for dual input devices Input: edt_ft5x06 - use devm_* functions where appropriate Input: hyperv-keyboard - pass through 0xE1 prefix Input: logips2pp - fix spelling s/reciver/receiver/ Input: delete non-required instances of include <linux/init.h> Input: twl4030-keypad - convert to using managed resources Input: twl6040-vibra - remove unneeded check for CONFIG_OF Input: twl4030-keypad - add device tree support Input: twl6040-vibra - add missing of_node_put Input: twl4030-vibra - add missing of_node_put Input: i8042 - cleanup SERIO_I8042 dependencies Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on x86 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on unicore32 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on sparc Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO for SH_CAYMAN Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on powerpc Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on mips Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on IA64 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on ARM/Footbridge ...
2014-01-25mips: select ARCH_MIGHT_HAVE_PC_SERIOMark Salter1-0/+1
Architectures which might use an i8042 for serial IO to keyboard, mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> CC: linux-mips@linux-mips.org Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6232/
2014-01-25mips: delete non-required instances of include <linux/init.h>Paul Gortmaker57-57/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2014-01-25MIPS: KVM: remove shadow_tlb codeJames Hogan3-138/+0
The kvm_mips_init_shadow_tlb() function is called from kvm_arch_vcpu_init() and initialises entries 0 to current_cpu_data.tlbsize-1 of the virtual cpu's shadow_tlb[64] array. However newer cores with FTLBs can have a tlbsize > 64, for example the ProAptiv I'm testing on has a total tlbsize of 576. This causes kvm_mips_init_shadow_tlb() to overflow the shadow_tlb[64] array and overwrite the comparecount_timer among other things, causing a lock up when starting a KVM guest. Aside from kvm_mips_init_shadow_tlb() which only initialises it, the shadow_tlb[64] array is only actually used by the following functions: - kvm_shadow_tlb_put() & kvm_shadow_tlb_load() These are never called. The only call sites are #if 0'd out. - kvm_mips_dump_shadow_tlbs() This is never called. It was originally added for trap & emulate, but turned out to be unnecessary so it was disabled. So instead of fixing the shadow_tlb initialisation code, lets just remove the shadow_tlb[64] array and the above functions entirely. The only functional change here is the removal of broken shadow_tlb initialisation. The rest just deletes dead code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Gleb Natapov <gleb@redhat.com> Cc: kvm@vger.kernel.org Cc: Sanjay Lal <sanjayl@kymasys.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6384/
2014-01-25MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHIJames Hogan1-3/+1
When KVM is enabled and TLB invalidation is supported, kvm_mips_flush_host_tlb() can cause a machine check exception due to multiple matching TLB entries. This can occur on shutdown even when KVM hasn't been actively used. Commit adb78de9eae8 (MIPS: mm: Move UNIQUE_ENTRYHI macro to a header file) created a common UNIQUE_ENTRYHI in asm/tlb.h but it didn't update the copy of UNIQUE_ENTRYHI in kvm_tlb.c to use it. Commit 36b175451399 (MIPS: tlb: Set the EHINV bit for TLBINVF cores when invalidating the TLB) later added TLB invalidation (EHINV) support to the common UNIQUE_ENTRYHI. Therefore make kvm_tlb.c use the EHINV aware UNIQUE_ENTRYHI implementation in asm/tlb.h too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Gleb Natapov <gleb@redhat.com> Cc: kvm@vger.kernel.org Cc: Sanjay Lal <sanjayl@kymasys.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6383/
2014-01-25mips/ide: flush dcache also if icache does not snoop dcacheSebastian Andrzej Siewior1-3/+3
If this is not done then the new just read data which remains in dcache will not make it into icache on time. Thus the CPU loads invalid data and executes crap. The result is that the user is not able to execute anything from its IDE based media while reading plain data is still working well. This problem has been reported as Debian #404951 http://bugs.debian.org/404951 http://comments.gmane.org/gmane.linux.ide/45092 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/2820/
2014-01-25MIPS: BCM47XX: fix position of cpu_wait disablingHauke Mehrtens1-9/+25
The disabling of cpu_wait was done too early, before the detection was done. This moves the code to a position where it actually works. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6352/
2014-01-25MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT valueFlorian Fainelli1-0/+1
Broadcom BCM63xx DSL SoCs have a L1-cache line size of 16 bytes (shift value of 4) instead of the currently configured 32 bytes L1-cache line size. Reported-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org>
2014-01-25MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N>Florian Fainelli1-3/+4
All platforms that require a special MIPS_L1_CACHE_SHIFT value have been updated, such that we can now make MIPS_L1_CACHE_SHIFT default to the appropriate integer value based on the select MIPS_L1_CACHE_SHIFT_<N> variable. Signed-off-by: Florian Fainelli <florian@openwrt.org>
2014-01-25MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>Florian Fainelli3-0/+21
In order to avoid keeping an ever growing list of chips which need to select a specific MIPS_L1_CACHE_SHIFT value introduce multiple internal and non-exposed Kconfig symbols for the various MIPS_L1_CACHE_SHIFT values out there and update the relevant Kconfig symbols to select them. Signed-off-by: Florian Fainelli <florian@openwrt.org>
2014-01-25MIPS: ZBOOT: gather string functions into string.cAntony Pavlov3-24/+30
In the worst case this adds less then 128 bytes of code but on the other hand this makes code organization more clear. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <blogic@openwrt.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6344/
2014-01-25arch/mips/pci: don't check resource with devm_ioremap_resourceWolfram Sang1-3/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6349/
2014-01-25arch/mips/lantiq/xway: don't check resource with devm_ioremap_resourceWolfram Sang1-4/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6348/
2014-01-25MIPS: BCM47XX: fix sparse warnings in board.cHauke Mehrtens1-10/+10
This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-25MIPS: BCM47XX: add board detection for Linksys WRT54GS V1Hauke Mehrtens2-0/+2
This adds board detection for Linksys WRT54GS V1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6317/
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 03:55:30 +0300