summaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28MIPS: Loongson64: Define PCI_IOBASEJiaxun Yang1-0/+8
PCI_IOBASE is used to create VM maps for PCI I/O ports, it is required by generic PCI drivers to make memory mapped I/O range work. To deal with legacy drivers that have fixed I/O ports range we reserved 0x10000 in PCI_IOBASE, should be enough for i8259 i8042 stuff. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: mm: add page valid judgement in function pte_modifyBibo Mao1-2/+5
If original PTE has _PAGE_ACCESSED bit set, and new pte has no _PAGE_NO_READ bit set, we can add _PAGE_SILENT_READ bit to enable page valid bit. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27mm/memory.c: Add memory read privilege on page fault handlingBibo Mao1-0/+2
Here add pte_sw_mkyoung function to make page readable on MIPS platform during page fault handling. This patch improves page fault latency about 10% on my MIPS machine with lmbench lat_pagefault case. It is noop function on other arches, there is no negative influence on those architectures. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27mm/memory.c: Update local TLB if PTE entry existsBibo Mao1-0/+23
If two threads concurrently fault at the same page, the thread that won the race updates the PTE and its local TLB. For now, the other thread gives up, simply does nothing, and continues. It could happen that this second thread triggers another fault, whereby it only updates its local TLB while handling the fault. Instead of triggering another fault, let's directly update the local TLB of the second thread. Function update_mmu_tlb is used here to update local TLB on the second thread, and it is defined as empty on other arches. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: Do not flush tlb page when updating PTE entryBibo Mao1-0/+5
It is not necessary to flush tlb page on all CPUs if suitable PTE entry exists already during page fault handling, just updating TLB is fine. Here redefine flush_tlb_fix_spurious_fault as empty on MIPS system. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: BCM63xx: fix 6328 boot selection bitÁlvaro Fernández Rojas1-2/+2
MISC_STRAP_BUS_BOOT_SEL_SHIFT is 18 according to Broadcom's GPL source code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-25MIPS: BCM63XX: fix BCM6358 GPIO countDaniel González Cabanelas1-3/+3
The BCM6358 SoC has only 38 available GPIOs. Fix it. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-24MIPS: SGI-IP30: Reorder the macros in war.hJoshua Kinard1-3/+2
Fix the ordering of the macros in arch/mips/mach-ip30/war.h to match those in arch/mips/mach-ip27/war.h. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-24MIPS: emulate CPUCFG instruction on older Loongson64 coresWANG Xuerui2-0/+72
CPUCFG is the instruction for querying processor characteristics on newer Loongson processors, much like CPUID of x86. Since the instruction is supposedly designed to provide a unified way to do feature detection (without having to, for example, parse /proc/cpuinfo which is too heavyweight), it is important to provide compatibility for older cores without native support. Fortunately, most of the fields can be synthesized without changes to semantics. Performance is not really big a concern, because feature detection logic is not expected to be invoked very often in typical userland applications. The instruction can't be emulated on LOONGSON_2EF cores, according to FlyGoat's experiments. Because the LWC2 opcode is assigned to other valid instructions on 2E and 2F, no RI exception is raised for us to intercept. So compatibility is only extended back furthest to Loongson-3A1000. Loongson-2K is covered too, as it is basically a remix of various blocks from the 3A/3B models from a kernel perspective. This is lightly based on Loongson's work on their Linux 3.10 fork, for being the authority on the right feature flags to fill in, where things aren't otherwise discoverable. Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-24MIPS: Tidy up CP0.Config6 bits definitionHuacai Chen1-13/+24
CP0.Config6 is a Vendor-defined register whose bits definitions are different from one to another. Recently, Xuerui's Loongson-3 patch and Serge's P5600 patch make the definitions inconsistency and unclear. To make life easy, this patch tidy the definition up: 1, Add a _MTI_ infix for proAptiv/P5600 feature bits; 2, Add a _LOONGSON_ infix for Loongson-3 feature bits; 3, Add bit6/bit7 definition for Loongson-3 which will be used later. All existing users of these macros are updated. Cc: WANG Xuerui <git@xen0n.name> Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22mips: Add CONFIG/CONFIG6/Cause reg fields macroSerge Semin1-0/+19
There are bit fields which persist in the MIPS CONFIG and CONFIG6 registers, but haven't been described in the generic mipsregs.h header so far. In particular, the generic CONFIG bitfields are BE - endian mode, BM - burst mode, SB - SimpleBE, OCP interface mode indicator, UDI - user-defined "CorExtend" instructions, DSP - data scratch pad RAM present, ISP - instruction scratch pad RAM present, etc. The core-specific CONFIG6 bitfields are JRCD - jump register cache prediction disable, R6 - MIPSr6 extensions enable, IFUPerfCtl - IFU performance control, SPCD - sleep state performance counter, DLSB - disable load/store bonding. A new exception code reported in the ExcCode field of the Cause register: 30 - Parity/ECC error exception happened on either fetch, load or cache refill. Lets add them to the mipsregs.h header to be used in future platform code, which have them utilized. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22mips: Add CP0 Write Merge config supportSerge Semin3-1/+14
CP0 config register may indicate whether write-through merging is allowed. Currently there are two types of the merging available: SysAD Valid and Full modes. Whether each of them are supported by the core is implementation dependent. Moreover whether the ability to change the mode also depends on the chip family instance. Taking into account all of this we created a dedicated mm_config() method to detect and enable merging if it's supported. It is called for MIPS-type processors at CPU-probe stage and attempts to detect whether the write merging is available. If it's known to be supported and switchable, then switch on the full mode. Otherwise just perform the CP0.Config.MM field analysis. In addition there are platforms like InterAptiv/ProAptiv, which do have the MM bit field set by default, but having write-through cacheing unsupported makes write-merging also unsupported. In this case we just ignore the MM field value. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22mips: Fix cpu_has_mips64r1/2 activation for MIPS32 CPUsSerge Semin1-2/+4
Commit 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA allows") updated the cpu_has_mips* macro to be replaced with a constant expression where it's possible. By mistake it wasn't done correctly for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to be replaced with conditional expression __isa_range_or_flag(), which means either ISA revision being within the range or the corresponding CPU options flag was set at the probe stage or both being true at the same time. But the ISA level value doesn't indicate whether the ISA is MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5 architectures the __isa_range() macro will activate the cpu_has_mips64rX flags, which is incorrect. In order to fix the problem we make sure the 64bits CPU support is enabled by means of checking the flag cpu_has_64bits aside with proper ISA range and specific Revision flag being set. Fixes: 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA allows") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22mips: Add MIPS Warrior P5600 supportSerge Semin1-0/+2
This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features and system level features like up to six P5600 calculation cores, CM2 with L2 cache, IOCU/IOMMU (though might be unused depending on the system-specific IP core configuration), GIC, CPC, virtualisation module, eJTAG and PDtrace. As being MIPS32 Release 5 based core it provides all the features available by the CPU_MIPS32_R5 config, while adding a few more like UCA attribute support, availability of CPU-freq (by means of L2/CM clock ratio setting), EI/VI GIC modes detection at runtime. In addition to this if P5600 architecture is enabled modern GNU GCC provides a specific tuning for P5600 processors with respect to the classic MIPS32 Release 5. First of all branch-likely avoidance is activated only when the code is compiled with the speed optimization (avoidance is always enabled for the pure MIPS32 Release 5 architecture). Secondly the madd/msub avoidance is enabled since madd/msub utilization isn't profitable due to overhead of getting the result out of the HI/LO registers. Multiply-accumulate instructions are activated and utilized together with the necessary code reorder when multiply-add/multiply-subtract statements are met. Finally load/store bonding is activated by default. All of these optimizations may make the code relatively faster than if just MIP32 release 5 architecture was requested. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22mips: Add MIPS Release 5 supportSerge Semin11-31/+64
There are five MIPS32/64 architecture releases currently available: from 1 to 6 except fourth one, which was intentionally skipped. Three of them can be called as major: 1st, 2nd and 6th, that not only have some system level alterations, but also introduced significant core/ISA level updates. The rest of the MIPS architecture releases are minor. Even though they don't have as much ISA/system/core level changes as the major ones with respect to the previous releases, they still provide a set of updates (I'd say they were intended to be the intermediate releases before a major one) that might be useful for the kernel and user-level code, when activated by the kernel or compiler. In particular the following features were introduced or ended up being available at/after MIPS32/64 Release 5 architecture: + the last release of the misaligned memory access instructions, + virtualisation - VZ ASE - is optional component of the arch, + SIMD - MSA ASE - is optional component of the arch, + DSP ASE is optional component of the arch, + CP0.Status.FR=1 for CP1.FIR.F64=1 (pure 64-bit FPU general registers) must be available if FPU is implemented, + CP1.FIR.Has2008 support is required so CP1.FCSR.{ABS2008,NAN2008} bits are available. + UFR/UNFR aliases to access CP0.Status.FR from user-space by means of ctc1/cfc1 instructions (enabled by CP0.Config5.UFR), + CP0.COnfig5.LLB=1 and eretnc instruction are implemented to without accidentally clearing LL-bit when returning from an interrupt, exception, or error trap, + XPA feature together with extended versions of CPx registers is introduced, which needs to have mfhc0/mthc0 instructions available. So due to these changes GNU GCC provides an extended instructions set support for MIPS32/64 Release 5 by default like eretnc/mfhc0/mthc0. Even though the architecture alteration isn't that big, it still worth to be taken into account by the kernel software. Finally we can't deny that some optimization/limitations might be found in future and implemented on some level in kernel or compiler. In this case having even intermediate MIPS architecture releases support would be more than useful. So the most of the changes provided by this commit can be split into either compile- or runtime configs related. The compile-time related changes are caused by adding the new CONFIG_CPU_MIPS32_R5/CONFIG_CPU_MIPSR5 configs and concern the code activating MIPSR2 or MIPSR6 already implemented features (like eretnc/LLbit, mthc0/mfhc0). In addition CPU_HAS_MSA can be now freely enabled for MIPS32/64 release 5 based platforms as this is done for CPU_MIPS32_R6 CPUs. The runtime changes concerns the features which are handled with respect to the MIPS ISA revision detected at run-time by means of CP0.Config.{AT,AR} bits. Alas these fields can be used to detect either r1 or r2 or r6 releases. But since we know which CPUs in fact support the R5 arch, we can manually set MIPS_CPU_ISA_M32R5/MIPS_CPU_ISA_M64R5 bit of c->isa_level and then use cpu_has_mips32r5/cpu_has_mips64r5 where it's appropriate. Since XPA/EVA provide too complex alterationss and to have them used with MIPS32 Release 2 charged kernels (for compatibility with current platform configs) they are left to be setup as a separate kernel configs. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-21mips: MAAR: Use more precise address maskSerge Semin1-1/+1
Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR pair register address field either takes [12:31] bits for non-XPA systems and [12:55] otherwise. In any case the current address mask is just wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits of physical address value. This shall cover the 64-bits architecture and systems with XPA enabled, and won't cause any problem for non-XPA 32-bit systems, since address values exceeding the architecture specific MAAR mask will be just truncated with setting zeros in the unsupported upper bits. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-20Merge tag 'noinstr-x86-kvm-2020-05-16' of ↵Paolo Bonzini2-61/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
2020-05-19mips: MAAR: Add XPA mode supportSerge Semin2-2/+25
When XPA mode is enabled the normally 32-bits MAAR pair registers are extended to be of 64-bits width as in pure 64-bits MIPS architecture. In this case the MAAR registers can enable the speculative loads/stores for addresses of up to 39-bits width. But in this case the process of the MAAR initialization changes a bit. The upper 32-bits of the registers are supposed to be accessed by mean of the dedicated instructions mfhc0/mthc0 and there is a CP0.MAAR.VH bit which should be set together with CP0.MAAR.VL as indication of the boundary validity. All of these peculiarities were taken into account in this commit so the speculative loads/stores would work when XPA mode is enabled. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-18MIPS: SGI-IP30: Remove R5432_CP0_INTERRUPT_WAR from war.hJoshua Kinard1-1/+0
Remove an old macro that no longer exists anywhere else in the tree that snuck in when IP30 support was added Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-17mips/mm: Add page soft dirty trackingGuoyun Sun2-4/+64
User space checkpoint and restart tool (CRIU) needs the page's change to be soft tracked. This allows to do a pre checkpoint and then dump only touched pages. Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-17MIPS: define more Loongson CP0.Config6 and CP0.Diag feature bitsWANG Xuerui1-0/+6
These are exposed to userland alternatively via the new CPUCFG instruction on Loongson-3A R4 and above. Add definitions for readback on older cores. Signed-off-by: WANG Xuerui <git@xen0n.name> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-17MIPS: Loongson64: define offsets and known revisions for some CPUCFG featuresWANG Xuerui1-0/+19
Add the constants for easier and maintainable composition of CPUCFG values. Signed-off-by: WANG Xuerui <git@xen0n.name> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-17MIPS: Loongson64: fix typos in loongson_regs.hWANG Xuerui1-5/+5
Fix some symbol names to align with Loongson's User Manual wording. Also correct the comment in csr_readq() suggesting the wrong instruction in use. Fixes: 6a6f9b7dafd50efc ("MIPS: Loongson: Add CFUCFG&CSR support") Signed-off-by: WANG Xuerui <git@xen0n.name> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-15kvm: add halt-polling cpu usage statsDavid Matlack1-0/+2
Two new stats for exposing halt-polling cpu usage: halt_poll_success_ns halt_poll_fail_ns Thus sum of these 2 stats is the total cpu time spent polling. "success" means the VCPU polled until a virtual interrupt was delivered. "fail" means the VCPU had to schedule out (either because the maximum poll time was reached or it needed to yield the CPU). To avoid touching every arch's kvm_vcpu_stat struct, only update and export halt-polling cpu usage stats if we're on x86. Exporting cpu usage as a u64 and in nanoseconds means we will overflow at ~500 years, which seems reasonably large. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Jon Cargille <jcargill@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200508182240.68440-1-jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15MIPS: SGI-IP27: Use the _AC() macro in spaces.hJoshua Kinard1-5/+7
The attached patch wraps several of the macros in IP27's spaces.h header file with the _AC() macro. This matches most of the other spaces.h files in the MIPS tree. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-12floppy: split the base port from the register in I/O accessesWilly Tarreau2-8/+8
Currently we have architecture-specific fd_inb() and fd_outb() functions or macros, taking just a port which is in fact made of a base address and a register. The base address is FDC-specific and derived from the local or global "fdc" variable through the FD_IOPORT macro used in the base address calculation. This change splits this by explicitly passing the FDC's base address and the register separately to fd_outb() and fd_inb(). It affects the following archs: - x86, alpha, mips, powerpc, parisc, arm, m68k: simple remap of port -> base+reg - sparc32: use of reg only, since the base address was already masked out and the FDC controller is known from a static struct. - sparc64: like x86 for PCI, like sparc32 for 82077 Some archs use inline functions and others macros. This was not unified in order to minimize the number of changes to review. For the same reason checkpatch still spews a few warnings about things that were already there before. The parisc still uses hard-coded register values and could be cleaned up by taking the register definitions. The sparc per-controller inb/outb functions could further be refined to explicitly take an FDC register instead of a port in argument but it was not needed yet and may be cleaned later. Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-09MIPS: Remove NEC MARKEINS/EMMAThomas Bogendoerfer3-291/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-09MIPS: Remove PMC MSP71xx platformThomas Bogendoerfer12-2064/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-09MIPS: Remove support for LASATThomas Bogendoerfer10-702/+0
All LASAT has probably gone bad, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-08MIPS: Loongson: Add DMA support for LS7ATiezhu Yang1-0/+5
In the current market, the most used bridge chip on the Loongson platform are RS780E and LS7A, the RS780E bridge chip is already supported by the mainline kernel. If use the default implementation of __phys_to_dma() and __dma_to_phys() in dma-direct.h when CONFIG_ARCH_HAS_PHYS_TO_DMA is not set, it works well used with LS7A on the Loongson single-way and multi-way platform, and also works well used with RS780E on the Loongson single-way platform, but the DMA address will be wrong on the non-node0 used with RS780E on the Loongson multi-way platform. Just as the description in the code comment, the devices get node id from 40 bit of HyperTransport bus, so we extract 2 bit node id (bit 44~45) from 48 bit address space of Loongson CPU and embed it into HyperTransport bus (bit 37-38), this operation can be done only at the software level used with RS780E on the Loongson multi-way platform, because it has no hardware function to translate address of node id, this is a hardware compatibility problem. Device | | DMA address | Host Bridge | | HT bus address (40 bit) | CPU | | physical address (48 bit) | RAM The LS7A has dma_node_id_offset field in the DMA route config register, the hardware can use the dma_node_id_offset to translate address of node id automatically, so we can get correct address when just use the dma_pfn_offset field in struct device. For the above reasons, in order to maintain downward compatibility to support the RS780E bridge chip, it is better to use the platform dependent implementation of __phys_to_dma() and __dma_to_phys(). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-08MIPS: inst.h: Stop including asm.h to avoid various build failuresHuacai Chen1-89/+95
Commit d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") causes a lot of build failures because macros in asm.h conflict with various subsystems. Some of these conflictions has been fixed (such as LONG, PANIC and PRINT) by adjusting asm.h, but some of them is nearly impossible to fix (such as PTR and END). The only reason of including asm.h in inst.h is that we need the PTR macro which is used by unaligned load/store helpers. So in this patch we define a new PTR_STR macro and use it to replace STR(PTR), then we can stop including asm.h to avoid various build failures. Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07MIPS: asm: Rename some macros to avoid build errorsHuacai Chen1-10/+10
Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to avoid build errors (all users are updated as well): 1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c 2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/ mac80211/debugfs_sta.c Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07MIPS: Use fallthrough for arch/mipsLiangliang Huang3-3/+3
Convert the various /* fallthrough */ comments to the pseudo-keyword fallthrough; Done via script: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Liangliang Huang <huangll@lemote.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07MIPS: Remove dead code in pci.hJason Yan1-3/+0
This code has been marked dead for more than 10 years. Seems no need to keep it now. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-30MIPS: perf: Add hardware perf events support for new Loongson-3Huacai Chen1-0/+1
New Loongson-3 means Loongson-3A R2 (Loongson-3A2000) and newer CPUs. Loongson-3 processors have three types of PMU types (so there are three event maps): Loongson-3A1000/Loonngson-3B1000/Loongson-3B1500 is Type-1, Loongson-3A2000/Loongson-3A3000 is Type-2, Loongson-3A4000+ is Type-3. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-30MIPS: ingenic: Drop obsolete code, merge the rest in setup.cPaul Cercueil4-220/+1
Drop a bootload of 10-years-old dirty code, that is not used anymore, as it has been replaced with clean code over the ages. Merge the very few bits left inside setup.c, so that everything is clean and tidy now. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-29MIPS: Loongson64: Switch the order of RS780E and LS7ALiangliang Huang1-2/+2
Sort the members of enum in alphabetical order is better to avoid duplicate mistakes (because the list may be grow very large), so fix it by exchanging the order. Signed-off-by: Liangliang Huang <huangll@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-28MIPS: Loongson: Get host bridge informationTiezhu Yang1-0/+6
Read the address of host bridge configuration space to get the vendor ID and device ID of host bridge, and then we can distinguish various types of host bridge such as LS7A or RS780E. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-26MIPS: Kernel: Identify Loongson-2K processorsJiaxun Yang1-0/+4
Loongson-2K (Loongson64 Reduced) is a family of SoC shipped with gs264e core. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-26MIPS: Rename the "Fill" cache ops to avoid build failureHuacai Chen1-1/+1
MIPS define a "Fill" macro as a cache operation in cacheops.h, this will cause build failure under some special configurations because in seq_file.c there is a "Fill" label. To avoid this failure we rename the "Fill" macro to "Fill_I" which has the same coding style as other cache operations in cacheops.h (we think renaming the "Fill" macro is more reasonable than renaming the "Fill" label). Callers of "Fill" macro is also updated. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-24MIPS: arch_send_call_function_single_ipi() calling conventions changeLiangliang Huang1-1/+1
Use mp_ops->send_ipi_single() instead of mp_ops->send_ipi_mask() in arch_send_call_function_single_ipi(). send_ipi_single() can send IPI signal to a special cpu more efficiently. Signed-off-by: Liangliang Huang <huangll@lemote.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-24MIPS: Loongson-3: Add some unaligned instructions emulationHuacai Chen1-0/+26
1, Add unaligned gslq, gssq, gslqc1, gssqc1 emulation; 2, Add unaligned gsl{h, w, d}x, gss{h, w, d}x emulation; 3, Add unaligned gslwxc1, gsswxc1, gsldxc1, gssdxc1 emulation. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-24MIPS: Move unaligned load/store helpers to inst.hHuacai Chen2-0/+777
Move unaligned load/store helpers from unaligned.c to inst.h, then other parts of the kernel can use these helpers. Use __ASSEMBLY__ to guard the definition of "LONG" in asm.h to avoid build error on IPxx platforms. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-24MIPS: Fix the declaration conflict of mm_isBranchInstr()Huacai Chen2-4/+3
mm_isBranchInstr() is declared both in branch.h and in fpu_emulator.h but the two declarations are conflict. If both of them are included by a same file, they will cause a build error: ./arch/mips/include/asm/branch.h:33:19: error: static declaration of 'mm_isBranchInstr' follows non-static declaration static inline int mm_isBranchInstr(struct pt_regs *regs, ^ ./arch/mips/include/asm/fpu_emulator.h:177:5: note: previous declaration of 'mm_isBranchInstr' was here int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, Fix this error by removing both isBranchInstr() and mm_isBranchInstr() in fpu_emulator.h, and declaring both of them in branch.h. Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-23arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>Masahiro Yamada2-61/+66
As the bug report [1] pointed out, <linux/vermagic.h> must be included after <linux/module.h>. I believe we should not impose any include order restriction. We often sort include directives alphabetically, but it is just coding style convention. Technically, we can include header files in any order by making every header self-contained. Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in <asm/module.h>, which is not included from <linux/vermagic.h>. Hence, the straight-forward fix-up would be as follows: |--- a/include/linux/vermagic.h |+++ b/include/linux/vermagic.h |@@ -1,5 +1,6 @@ | /* SPDX-License-Identifier: GPL-2.0 */ | #include <generated/utsrelease.h> |+#include <linux/module.h> | | /* Simply sanity version stamp for modules. */ | #ifdef CONFIG_SMP This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC definitions into <asm/vermagic.h>. With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal, and the location of MODULE_ARCH_VERMAGIC definitions will be consistent. For arc and ia64, MODULE_PROC_FAMILY is only used for defining MODULE_ARCH_VERMAGIC. I squashed it. For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely because they contained nothing but MODULE_ARCH_VERMAGIC definition. Kbuild will automatically generate <asm/modules.h> at build-time, wrapping <asm-generic/module.h>. [1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org>
2020-04-21MIPS: Cleanup code about plat_mem_setup()Tiezhu Yang1-1/+1
In the current code, plat_mem_setup() is called by arch_mem_init() instead of setup_arch() and has been declared in asm/bootinfo.h, so modify the code comment to reflect the reality and remove the useless duplicate declartion in arch/mips/kernel/setup.c. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-20MIPS: Loongson64: Remove dead RTC codeJiaxun Yang1-36/+0
RTC is now enabled by devicetree. So platform code is no longer needed. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-19MIPS: move ioremap_prot und iounmap out of lineChristoph Hellwig1-83/+3
Neither of these interfaces is anywhere near the fast path. Move them out of line and avoid exposing implementation details to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-19MIPS: split out the 64-bit ioremap implementationChristoph Hellwig1-28/+37
Split out the mips64 ioremap implementation entirely, as it will never use page table based remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-19MIPS: merge __ioremap_mode into ioremap_protChristoph Hellwig1-17/+13
There is no reason to have two ioremap with flags interfaces. Merge the historic mips __ioremap_mode into ioremap_prot which is a generic kernel interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 09:23:55 +0300