summaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)AuthorFilesLines
2018-03-20dma/direct: Handle the memory encryption bit in common codeChristoph Hellwig2-7/+7
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add the memory encryption mask to the non-prefixed versions. Use the __-prefixed versions directly instead of clearing the mask again in various places. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20MIPS: Drop spurious __unused in struct compat_flockJames Hogan1-1/+0
MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it has an extra short __unused before pad[4], which combined with alignment increases the size to 40 bytes compared with struct flock's 36 bytes. Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock struct to userland, which results in corruption of the userland word after the struct flock when running 32-bit userlands on 64-bit kernels. This was observed to cause a bus error exception when starting Firefox on Debian 8 (Jessie). Reported-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: James Hogan <jhogan@kernel.org> Tested-by: Peter Mamonov <pmamonov@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.13+ Patchwork: https://patchwork.linux-mips.org/patch/18646/
2018-02-12unify {de,}mangle_poll(), get rid of kernel-side POLL...Al Viro1-18/+1
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07Merge tag 'mips_4.16' of ↵Linus Torvalds6-390/+383
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.16. Rough overview: (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console (2) Support for the Ranchu board (used by Android emulator) (3) Various cleanups and misc improvements More detailed summary: Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of 'MEM_RESERVED'" * tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits) MIPS: Malta: Sanitize mouse and keyboard configuration. MIPS: Update defconfigs after previous patch. MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead MIPS: Generic: Support GIC in EIC mode MIPS: generic: Fix Makefile alignment MIPS: generic: Fix ranchu_of_match[] termination MIPS: generic: Fix machine compatible matching MIPS: Loongson fix name confict - MEM_RESERVED MIPS: bcm47xx: enable ZBOOT support MIPS: Fix trailing semicolon MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers. MIPS: MSA: Update helpers to use new asm macros MIPS: XPA: Standardise readx/writex accessors MIPS: XPA: Allow use of $0 (zero) to MTHC0 MIPS: XPA: Use XPA instructions in assembly MIPS: VZ: Pass GC0 register names in $n format MIPS: VZ: Update helpers to use new asm macros ...
2018-02-05MIPS: generic: Fix machine compatible matchingJames Hogan1-1/+1
We now have a platform (Ranchu) in the "generic" platform which matches based on the FDT compatible string using mips_machine_is_compatible(), however that function doesn't stop at a blank struct of_device_id::compatible as that is an array in the struct, not a pointer to a string. Fix the loop completion to check the first byte of the compatible array rather than the address of the compatible array in the struct. Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18580/
2018-02-02Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-01Merge branch 'work.whack-a-mole' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull asm/uaccess.h whack-a-mole from Al Viro: "It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop cropping up..." * 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h riscv: use linux/uaccess.h, not asm/uaccess.h... ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
2018-02-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+3
Merge updates from Andrew Morton: - misc fixes - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) mm: remove PG_highmem description tools, vm: new option to specify kpageflags file mm/swap.c: make functions and their kernel-doc agree mm, memory_hotplug: fix memmap initialization mm: correct comments regarding do_fault_around() mm: numa: do not trap faults on shared data section pages. hugetlb, mbind: fall back to default policy if vma is NULL hugetlb, mempolicy: fix the mbind hugetlb migration mm, hugetlb: further simplify hugetlb allocation API mm, hugetlb: get rid of surplus page accounting tricks mm, hugetlb: do not rely on overcommit limit during migration mm, hugetlb: integrate giga hugetlb more naturally to the allocation path mm, hugetlb: unify core page allocation accounting and initialization mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes mm/memcontrol.c: make local symbol static mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd() include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer mm/compaction.c: fix comment for try_to_compact_pages() mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it zsmalloc: use U suffix for negative literals being shifted ...
2018-02-01mips: use generic_pmdp_establish as pmdp_establishKirill A. Shutemov1-0/+3
MIPS doesn't support hardware dirty/accessed bits. generic_pmdp_establish() is suitable in this case. Link: http://lkml.kernel.org/r/20171213105756.69879-6-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+4
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds6-25/+17
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-31Merge branch 'misc.poll' of ↵Linus Torvalds1-1/+18
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-31Merge branch 'siginfo-linus' of ↵Linus Torvalds2-158/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-24MIPS: Loongson fix name confict - MEM_RESERVEDHuacai Chen1-1/+1
MEM_RESERVED is used as a value of enum mem_type in include/linux/ edac.h. This will make failure to build for Loongson in some case: for example with CONFIG_RAS enabled. So here rename MEM_RESERVED to SYSTEM_RAM_RESERVED in Loongson code. Signed-off-by: YunQiang Su <yunqiang.su@imgtec.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17724/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-24MIPS: Fix trailing semicolonLuis de Bethencourt1-1/+1
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Fixes: d0f0f63ac137 ("MIPS: Rewrite csum_fold to plain C.") Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18517/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-22MIPS: MSA: Update helpers to use new asm macrosJames Hogan1-44/+19
Update MSA control register access helpers to use the new helpers for parsing register names and creating custom assembly macro instructions. This allows the move via $at to be dropped (saving a total of about 20 bytes of kernel code). Note, this does not alter the equivalent code in .S files, which still uses the $at trick. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17776/
2018-01-22MIPS: XPA: Standardise readx/writex accessorsJames Hogan1-10/+10
Now that we are using assembler macros to implement XPA instructions on toolchains which don't support them, pass Cop0 register names to the __{readx,writex}_32bit_c0_register macros in $n format rather than register numbers. Also pass a register select which may be useful in future (for example for MemoryMapID field of WatchHi registers on I6500). This is to make them consistent with the normal Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17777/
2018-01-22MIPS: XPA: Allow use of $0 (zero) to MTHC0James Hogan1-2/+2
Tweak __writex_32bit_c0_register() to allow the compiler to use $0 (the zero register) as an input to the mthc0 instruction. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17774/
2018-01-22MIPS: XPA: Use XPA instructions in assemblyJames Hogan1-10/+16
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of directly encoding them with the _ASM_INSN* macros, and transparently implement these instructions as assembler macros if the toolchain doesn't support them natively, using the recently introduced assembler macro helpers. The old direct encodings were restricted to using the register $at, so this allows the extra register moves to go away (saving a grand total of 24 bytes). Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17775/
2018-01-22MIPS: VZ: Pass GC0 register names in $n formatJames Hogan1-188/+188
Now that we are using assembler macros to implement VZ instructions on toolchains which don't support them, pass VZ guest Cop0 register names to the __{read,write}_{32bit,ulong,64bit}_gc0_register macros in $n format rather than register numbers. This is to make them consistent with the normal root Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17773/
2018-01-22MIPS: VZ: Update helpers to use new asm macrosJames Hogan1-127/+37
Update VZ guest register & guest TLB access helpers to use the new assembly macros for parsing register names and creating custom assembly macro instructions, which has a number of advantages: - Better code can be generated on toolchains which don't support VZ, more closely matching those which do, since there is no need to bounce values via the $at register. Some differences still remain due to the inability to safely fill branch delay slots and R6 compact branch forbidden slots with explicitly encoded instructions, resulting in some extra NOPs added by the assembler. - Some code duplication between toolchains which do and don't support VZ instructions is removed, since the helpers are only implemented once. When the toolchain doesn't implement the instruction an assembly macro implements it instead. - Instruction encodings are kept together in the source. On a generic kernel with KVM VZ support enabled this change saves about 2.5KiB of kernel code when TOOLCHAIN_SUPPORTS_VIRT=n, bringing it down to about 0.5KiB more than when TOOLCHAIN_SUPPORTS_VIRT=y on r6, and just 68 bytes more on r2. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17772/
2018-01-22MIPS: Add helpers for assembler macro instructionsJames Hogan1-0/+83
Implement a parse_r assembler macro in asm/mipsregs.h to parse a register in $n form, and a few C macros for defining assembler macro instructions. These can be used to more transparently support older binutils versions which don't support for example the msa, virt, xpa, or crc instructions. In particular they overcome the difficulty of turning a register name in $n form into an instruction encoding suitable for giving to .word / .hword, which is particularly problematic when needed from inline assembly where the compiler is responsible for register allocation. Traditionally this had required the use of $at and an extra MOV instruction, but for CRC instructions with multiple GP register operands that approach becomes more difficult. Three assembler macro creation helpers are added: - _ASM_MACRO_0(OP, ENC) This is to define an assembler macro for an instruction which has no operands, for example the VZ TLBGR instruction. - _ASM_MACRO_2R(OP, R1, R2, ENC) This is to define an assembler macro for an instruction which has 2 register operands, for example the CFCMSA instruction. - _ASM_MACRO_3R(OP, R1, R2, R3, ENC) This is to define an assembler macro for an instruction which has 3 register operands, for example the crc32 instructions. - _ASM_MACRO_2R_1S(OP, R1, R2, SEL3, ENC) This is to define an assembler macro for a Cop0 move instruction, with 2 register operands and an optional register select operand which defaults to 0, for example the VZ MFGC0 instruction. Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17770/
2018-01-19MIPS: platform: add machtype IDs for more Ingenic SoCsPaul Cercueil1-0/+2
Add a machtype ID for the JZ4780 SoC, which was missing, and one for the newly supported JZ4770 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18485/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-16signal: Unify and correct copy_siginfo_to_user32Eric W. Biederman1-2/+0
Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16signal: unify compat_siginfo_tAl Viro1-71/+0
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in linux/compat.h CONFIG_X86_X32 is set when the user requests X32 support. CONFIG_X86_X32_ABI is set when the user requests X32 support and the tool-chain has X32 allowing X32 support to be built. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-01-15mips/netlogic: remove swiotlb supportChristoph Hellwig1-3/+0
nlm_swiotlb_dma_ops is unused code, so the whole swiotlb support is dead. If it gets resurrected at some point it should use the generic swiotlb_dma_ops instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com>
2018-01-12signal/mips: switch mips to generic siginfoAl Viro1-85/+1
... having taught the latter that si_errno and si_code might be swapped. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-01-10dma-mapping: move dma_mark_clean to dma-direct.hChristoph Hellwig1-2/+0
And unlike the other helpers we don't require a <asm/dma-direct.h> as this helper is a special case for ia64 only, and this keeps it as simple as possible. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10dma-mapping: move swiotlb arch helpers to a new headerChristoph Hellwig5-20/+17
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10mips: fix an off-by-one in dma_capableChristoph Hellwig1-1/+1
This makes it match the generic version. Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10Construct init thread stack in the linker script rather than by unionDavid Howells1-3/+0
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-10MIPS: mipsregs.h: Make read_c0_prid use const accessorJames Hogan1-1/+1
Make read_c0_prid() use the new constant accessor macros so that it can potentially be optimised or removed by the compiler. This is particularly important under virtualisation, where even with hardware assisted virtualisation (VZ), access to the PRid register may need to be emulated by the hypervisor. In particular this helps eliminate the read of the PRid register in the rather frequently called add_interrupt_randomness() (which calls into arch/mips/include/asm/timex.h) when the prid is unused but the read can't be removed due to the inline asm being marked __volatile__. Reported-by: Yann LeDu <Yann.LeDu@imgtec.com> Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17923/
2018-01-10MIPS: mipsregs.h: Add read const Cop0 macrosJames Hogan1-10/+27
Some Cop0 registers are constant and have no side effects when read. There is no need for the inline asm to read these to be marked __volatile__, and doing so prevents them from being removed by the compiler. Add a few new accessor macros to handle these registers more efficiently (especially for the sake of running in a guest where redundant access to the register may trap to the hypervisor): __read_const_32bit_c0_register() __read_const_64bit_c0_register() __read_const_ulong_c0_register() Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17922/
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd1-1/+0
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-19bcm63xx_enet: use platform data for dma channel numbersJonas Gorski1-0/+4
To reduce the reliance on device ids, pass the dma channel numbers to the enet devices as platform data. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+1
Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
2017-12-05Merge tag 'tty-4.15-rc3' of ↵Linus Torvalds2-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serdev and serial fixes for 4.15-rc3. They resolve some reported problems: - a number of serdev fixes to resolve crashes - MIPS build fixes for their serial port - a new 8250 device id All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MIPS: Add custom serial.h with BASE_BAUD override for generic kernel serdev: ttyport: fix tty locking in close serdev: ttyport: fix NULL-deref on hangup serdev: fix receive_buf return value when no callback serdev: ttyport: add missing receive_buf sanity checks serial: 8250_early: Only set divisor if valid clk & baud serial: 8250_pci: Add Amazon PCI serial device ID
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner1-0/+1
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.hAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-30mm: switch to 'define pmd_write' instead of __HAVE_ARCH_PMD_WRITEDan Williams1-1/+1
In response to compile breakage introduced by a series that added the pud_write helper to x86, Stephen notes: did you consider using the other paradigm: In arch include files: #define pud_write pud_write static inline int pud_write(pud_t pud) ..... Then in include/asm-generic/pgtable.h: #ifndef pud_write tatic inline int pud_write(pud_t pud) { .... } #endif If you had, then the powerpc code would have worked ... ;-) and many of the other interfaces in include/asm-generic/pgtable.h are protected that way ... Given that some architecture already define pmd_write() as a macro, it's a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE. Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30make kernel-side POLL... arch-independentAl Viro1-0/+17
mangle/demangle on the way to/from userland Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28MIPS: Add custom serial.h with BASE_BAUD override for generic kernelMatt Redfearn2-1/+22
Add a custom serial.h header for MIPS, allowing platforms to override the asm-generic version if required. The generic platform uses this header to set BASE_BAUD to 0. The generic platform supports multiple boards, which may have different UART clocks. Also one of the boards supported is the Boston FPGA board, where the UART clock depends on the loaded FPGA bitfile. As such there is no way that the generic kernel can set a compile time default BASE_BAUD. Commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") changed the behavior of of_setup_earlycon such that any baud rate set in the device tree is now set in the earlycon structure. The UART driver will then calculate a divisor based on BASE_BAUD and set it. With MIPS generic kernels this resulted in garbage output due to the incorrect uart clock rate being used to calculate a divisor. This commit, combined with "serial: 8250_early: Only set divisor if valid clk & baud" prevents the earlycon code setting a bad divisor and restores earlycon output. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28define __poll_t, annotate constantsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-18Merge tag 'locks-v4.15-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking update from Jeff Layton: "A couple of fixes for a patch that went into v4.14, and the bug report just came in a few days ago.. It passes my (minimal) testing, and has been in linux-next for a few days now. I also would like to get my address changed in MAINTAINERS to clear that hurdle" * tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall fcntl: don't leak fd reference when fixup_compat_flock fails MAINTAINERS: s/jlayton@poochiereds.net/jlayton@kernel.org/
2017-11-17Merge branch 'misc.compat' of ↵Linus Torvalds1-33/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat and uaccess updates from Al Viro: - {get,put}_compat_sigset() series - assorted compat ioctl stuff - more set_fs() elimination - a few more timespec64 conversions - several removals of pointless access_ok() in places where it was followed only by non-__ variants of primitives * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) coredump: call do_unlinkat directly instead of sys_unlink fs: expose do_unlinkat for built-in callers ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs() ipmi: get rid of pointless access_ok() pi433: sanitize ioctl cxlflash: get rid of pointless access_ok() mtdchar: get rid of pointless access_ok() r128: switch compat ioctls to drm_ioctl_kernel() selection: get rid of field-by-field copyin VT_RESIZEX: get rid of field-by-field copyin i2c compat ioctls: move to ->compat_ioctl() sched_rr_get_interval(): move compat to native, get rid of set_fs() mips: switch to {get,put}_compat_sigset() sparc: switch to {get,put}_compat_sigset() s390: switch to {get,put}_compat_sigset() ppc: switch to {get,put}_compat_sigset() parisc: switch to {get,put}_compat_sigset() get_compat_sigset() get rid of {get,put}_compat_itimerspec() io_getevents: Use timespec64 to represent timeouts ...
2017-11-17Merge tag 'libnvdimm-for-4.15' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>" * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
2017-11-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-7/+1
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-16mm, arch: remove empty_bad_page*Michal Hocko1-7/+1
empty_bad_page() and empty_bad_pte_table() seem to be relics from old days which is not used by any code for a long time. I have tried to find when exactly but this is not really all that straightforward due to many code movements - traces disappear around 2.4 times. Anyway no code really references neither empty_bad_page nor empty_bad_pte_table. We only allocate the storage which is not used by anybody so remove them. Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Ralf Baechle <ralf@linus-mips.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David Howells <dhowells@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge tag 'mips_4.15' of ↵Linus Torvalds10-38/+51
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.15. Fixes: - ralink: Fix MT7620 PCI build issues (4.5) - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP (4.1) - Fix MIPS64 FP save/restore on 32-bit kernels (4.0) - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19) - ralink: Fix MT7628 pinmux (3.19) - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17) - Fix n32 core dumping as o32 since regset support (3.13) - ralink: Drop obsolete USB_ARCH_HAS_HCD select Build system: - Default to "generic" (multiplatform) system type instead of IP22 - Use generic little endian MIPS32 r2 configuration as default defconfig instead of ip22_defconfig FPU emulation: - Fix exception generation for certain R6 FPU instructions SMP: - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id spaces Miscellaneous: - Add iomem resource for kernel bss section for kexec/kdump - Atomics: Nudge writes on bit unlock - DT files: Standardise "ok" -> "okay" Minor cleanups: - Define virt_to_pfn() - Make thread_saved_pc static - Simplify 32-bit sign extension in __read_64bit_c0_split() - DMA: Use vma_pages() helper - FPU emulation: Replace unsigned with unsigned int - MM: Removed unused lastpfn - Alchemy: Make clk_ops const - Lasat: Use setup_timer() helper - ralink: Use BIT() in MT7620 PCI driver Platform support: BMIPS: - Enable HARDIRQS_SW_RESEND Broadcom BCM63XX: - Add clkdev lookup support - Update clk driver, UART driver, DTs to handle named refclk from DTs - Split apart various clocks to more closely match hardware - Add ethernet clocks Cavium Octeon: - Remove usage of cvmx_wait() in favour of __delay() ImgTec Pistachio: - DT: Drop deprecated dwmmc num-slots property Ingenic JZ4780: - Add NFS root to Ci20 defconfig - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog driver with this SoC Generic (multiplatform): - Migrate xilfpga (MIPSfpga) platform to the generic platform Lantiq xway: - Fix ASC0/ASC1 clocks" * tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits) MIPS: Add iomem resource for kernel bss section. MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP MIPS: BMIPS: Enable HARDIRQS_SW_RESEND MIPS: pci: Make use of the BIT() macro inside the mt7620 driver MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver MIPS: pci: Remove duplicate define in mt7620 driver MIPS: ralink: Fix typo in mt7628 pinmux function MIPS: ralink: Fix MT7628 pinmux MIPS: Fix odd fp register warnings with MIPS64r2 watchdog: jz4780: Allow selection of jz4740-wdt driver MIPS/ptrace: Update syscall nr on register changes MIPS/ptrace: Pick up ptrace/seccomp changed syscalls MIPS: Fix an n32 core file generation regset support regression MIPS: Fix MIPS64 FP save/restore on 32-bit kernels MIPS: page.h: Define virt_to_pfn() MIPS: Xilfpga: Switch to using generic defconfigs MIPS: generic: Add support for MIPSfpga MIPS: Set defconfig target to a generic system for 32r2el MIPS: Kconfig: Set default MIPS system type as generic MIPS: DTS: Remove num-slots from Pistachio SoC ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 08:11:48 +0300