summaryrefslogtreecommitdiff
path: root/arch/mips/bcm47xx
AgeCommit message (Collapse)AuthorFilesLines
2010-08-05MIPS: BCM47xx: Fix nvram_getenv return value.Hauke Mehrtens1-2/+2
Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on success and -9 if the value was not found. If the input was wrong -8 will be returned by cfe_getenv. Change nvram_getenv to do the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1520/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Migrate to new platform makefile style.Ralf Baechle1-0/+7
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Really fix 128MB RAM problemHauke Mehrtens1-8/+14
The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp. 84a6fcb368a080620d12fc4d79e07902dbee7335 (kernel.org) was wrong. The BCM47xx architecture maps the ram into a 128MB address space. It will be spaced there as often as goes into the 128MB. Detection tries to find the position where the same memory is found. When reading beyond 128MB the processor will throw an exception. If 128MB RAM is installed, it will not find a memory alias because it tries to read beyond the 128MB border. Now it just assumes 128MB installed ram if it can not find an alias. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1508/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: BCM47xx: Add NVRAM support devicesWaldemar Brodkorb3-13/+122
When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails, because of following error message: ... [ 0.424000] b44: b44.c:v2.0 [ 0.424000] b44: Invalid MAC address found in EEPROM [ 0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting [ 0.436000] b44: probe of ssb0:1 failed with error -22 ... The router uses a CFE bootloader, but most of the needed environment variables for network card initialization, are not available from CFE via printenv and even though not via cfe_getenv(). The required environment variables are saved in a special partition in flash memory. The attached patch implement nvram_getenv and enables bootup via NFS root on my router. Most of the patch is extracted from the OpenWrt subversion repository and stripped down and cleaned up to just fix this issue. [Ralf: sorted out header file inclusions. Lots of unneded headers and such that should have been included.] Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Reviewed-by: Phil Sutter <phil@nwl.cc> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/1359/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Nuke trailing blank linesRalf Baechle4-4/+0
Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-22MIPS: BCM47xx: Fix 128MB RAM supportHauke Mehrtens1-0/+8
Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the DDR address space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Replace all usages of CL_SIZE by COMMAND_LINE_SIZEDmitri Vorobiev1-5/+5
The MIPS-specific macro CL_SIZE is merely aliasing the macro COMMAND_LINE_SIZE. Other architectures use the latter; also, COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so let's use it, and remove the alias. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13MIPS: Make local arrays with CL_SIZE static __initdataAtsushi Nemoto1-1/+1
Since commit 22242681cff52bfb7cba5d2a37b91802be7a4e4c ("MIPS: Extend COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this size will cause an build failure with default CONFIG_FRAME_WARN settings. Although current users of such array variables are all early bootstrap code and not likely to cause real stack overflow (thread_info corruption), it is preferable to to declare these arrays static with __initdata. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add reset button supportAurelien Jarno1-0/+37
This patch adds support for the reset button of WGT634U machine, using GPIO interrupts. Based on a patch from Michel Lespinasse. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno2-53/+37
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add machine detection messageAurelien Jarno1-0/+3
This adds a printk message when a WGT634U machine is detected. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19[MIPS] BCM47XX: Use new SSB SPROM data structureAurelien Jarno2-7/+7
Switch the BCM47XX code to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19[MIPS] WGT634U: Register MTD as platform device.Aurelien Jarno1-3/+66
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] Kill duplicated setup_irq() for cp0 timerAtsushi Nemoto1-7/+0
Also many plat_timer_setup() can be killed too. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12[MIPS] Deforest the function pointer jungle in the time code.Ralf Baechle2-3/+1
Hard to follow who is pointing what to where and why so it's simply getting in the way of the time code renovation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12[MIPS] GPIO LED driver for the WGT634U machineAurelien Jarno2-1/+65
Add LED support to the WGT634U machine. It uses the new gpio-led driver and a platform driver for the pin definitions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12[MIPS] Add gpio support to the BCM47XX platformAurelien Jarno2-1/+80
Add GPIO support to the BCM47XX platform. It will be used by a GPIO LED driver. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12[MIPS] Add CFE support to BCM47XXAurelien Jarno2-5/+159
Add CFE support to the BCM47XX code. That includes querying CFE environment variables as well as using CFE to print messages before the serial port is initialized (early printk). Signed-off-by: Aurelien Jarno <aurel32@farad.aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12[MIPS] Add support for BCM47XX CPUs.Aurelien Jarno6-0/+297
Note that the BCM4710 does not support the wait instruction, this is not a mistake in the code. It originally comes from the OpenWrt patches. Cc: Michael Buesch <mb@bu3sch.de> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Florian Schirmer <jolt@tuxbox.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 05:30:30 +0300