summaryrefslogtreecommitdiff
path: root/arch/mips/ar7
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-0/+1
Pull MIPS updates from Paul Burton: "A light batch this time around but significant improvements for certain systems: - Removal of readq & writeq for MIPS32 kernels where they would simply BUG() anyway, allowing drivers or other code that #ifdefs on their presence to work properly. - Improvements for Ingenic JZ4740 systems, including support for the external memory controller & pinmuxing fixes for qi_lb60/NanoNote systems. - Improvements for Lantiq systems, in particular around SMP & IPIs. - DT updates for ralink/MediaTek MT7628a systems to probe & configure a bunch more devices. - Miscellaneous cleanups & build fixes" * tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MIPS: fix some more fall through errors in arch/mips MIPS: perf events: handle switch statement falling through warnings mips/kprobes: Export kprobe_fault_handler() MAINTAINERS: Add myself as Ingenic SoCs maintainer MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes MIPS: ralink: mt7628a.dtsi: Add pinmux DT node MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier MIPS: lantiq: Add SMP support for lantiq interrupt controller MIPS: lantiq: Shorten register names, remove unused macros MIPS: lantiq: Fix bitfield masking MIPS: lantiq: Remove unused macros MIPS: lantiq: Fix attributes of of_device_id structure MIPS: lantiq: Change variables to the same type as the source MIPS: lantiq: Move macro directly to iomem function mips: Remove q-accessors from non-64bit platforms FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h MIPS: configs: Remove useless UEVENT_HELPER_PATH ...
2019-07-16MIPS: fix some more fall through errors in arch/mipsStephen Rothwell1-0/+1
Fix these errors: arch/mips/cavium-octeon/executive/cvmx-pko.c:489:7: error: this statement may fall through [-Werror=implicit-fallthrough=] arch/mips/bcm63xx/dev-flash.c:89:3: error: this statement may fall through [-Werror=implicit-fallthrough=] arch/mips/ath79/setup.c:155:17: error: this statement may fall through [-Werror=implicit-fallthrough=] arch/mips/ar7/setup.c:50:3: error: this statement may fall through [-Werror=implicit-fallthrough=] Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Crispin <john@phrozen.org> Cc: Matthias Schiffer <mschiffer@universe-factory.net> Cc: "Petr Štetiar" <ynezz@true.cz> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 182Thomas Gleixner3-39/+3
Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 32 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.531157061@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102Thomas Gleixner5-70/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-05net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-2/+2
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-17mips: unify prom_putchar() declarationsAlexander Sverdlin1-2/+2
prom_putchar() is used centrally in early printk infrastructure therefore at least MIPS should agree on the function return type. [paul.burton@mips.com: - Include linux/types.h in asm/setup.h to gain the bool typedef before we start include asm/setup.h elsewhere. - Include asm/setup.h in all files that use or define prom_putchar(). - Also standardise on signed rather than unsigned char argument.] Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19842/ Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com>
2018-06-29MIPS: AR7: Normalize clk APIGeert Uytterhoeven1-0/+29
Coldfire still provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_round_rate(), clk_set_rate(), clk_set_parent(), or clk_get_parent() functions when a platform lacks those interfaces. This adds empty stub implementations for each of them, and I don't even try to do something useful here but instead just print a WARN() message to make it obvious what is going on if they ever end up being called. The drivers that call these won't be used on these platforms (otherwise we'd get a link error today), so the added code is harmless bloat and will warn about accidental use. Based on commit bd7fefe1f06ca6cc ("ARM: w90x900: normalize clk API"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19503/ Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-02-19MIPS: AR7: Constify gpio_ledArvind Yadav1-7/+7
gpio_leds are not supposed to change at runtime. struct gpio_led_platform_data contains a const struct gpio_led pointer since v2.6.39, so mark the gpio_led structures const too. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18007/ [jhogan@kernel.org: improve commit message] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-10MIPS: AR7: ensure the port type's FCR value is usedJonas Gorski1-1/+1
Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-11-08MIPS: AR7: Ensure that serial ports are properly set upOswald Buddenhagen1-0/+1
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08MIPS: AR7: Defer registration of GPIOJonas Gorski2-2/+4
When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-06MIPS: AR7: allow NULL clock for clk_get_rateJonas Gorski1-0/+3
Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reported-by: Mathias Kresin <dev@kresin.me> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16775/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-14MIPS: Audit and remove any unnecessary uses of module.hPaul Gortmaker5-5/+4
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2016-02-19MIPS: ar7: use gpiochip data pointerLinus Walleij1-17/+9
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Cc: Alban Bedel <albeu@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-24MIPS: ar7: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11922/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-04Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-3/+4
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel3-3/+4
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-01phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn1-2/+3
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02MIPS: AR7: Replace mac address parsingDaniel Walter1-4/+1
Replace sscanf() with mac_pton(). [ralf@linux-mips.org: Resolved conflict.] Signed-off-by: Daniel Walter <dwalter@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24mips: Convert pr_warning to pr_warnJoe Perches1-12/+12
Use the much more common pr_warn instead of pr_warning with the goal of removing pr_warning eventually. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Cc: linux-mips <linux-mips@linux-mips.org> Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/7935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-27MIPS: Restore init.h usage to arch/mips/ar7/time.cPaul Gortmaker1-0/+1
Commit 0046be10e0c502705fc74d91408eba13a73bc201 ("mips: delete non-required instances of include <linux/init.h>") inadvertently removed an include that was actually correct. Restore it. Note that it gets init.h implicitly anyway, so this is largely a cosmetic fixup; no build regressions were caused by this. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+0
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-25mips: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2013-11-26MIPS: Remove panic_timeout settingsRalf Baechle1-1/+0
Now that we have a CONFIG_PANIC_TIMEOUT=x setting, remove the mips settings. The default is 0, which means don't reboot on panic. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Shinya Kuribayashi <skuribay@pobox.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: benh@kernel.crashing.org Cc: paulus@samba.org Cc: mpe@ellerman.id.au Cc: felipe.contreras@gmail.com Cc: linux-mips@linux-mips.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d19dc75fca343ec5d9ada75a1400f57330021976.1385418410.git.jbaron@akamai.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-08MIPS: FW: Remove obsolete header file for MTI platforms.Steven J. Hill1-1/+0
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of all inclusions of it by Malta and SEAD-3 platforms. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: ar7 powertv build"]. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: unbreak powertv build"]. [ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle2-9/+9
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: AR7: use part_probe_types to specificy the partition parser to useFlorian Fainelli1-0/+3
This patch changes the physmap-flash platform data on AR7 to pass the correct partition parser: ar7part to used by the "physmap-flash" mapping driver so we get the partitions probed correctly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-17arch: Use eth_random_addrJoe Perches1-2/+2
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-11Merge branches 'next/ar7', 'next/ath79', 'next/bcm63xx', 'next/bmips', ↵Ralf Baechle3-3/+40
'next/cavium', 'next/generic', 'next/kprobes', 'next/lantiq', 'next/perf' and 'next/raza' into mips-for-linux-next
2011-12-08MIPS: AR7: add LEDs layout for the Actiontec GT701 routerFlorian Fainelli1-0/+37
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: AR7: constify some arrays in gpio and prom codeFlorian Fainelli2-3/+3
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2980/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Fix up inconsistency in panic() string argument.Ralf Baechle2-2/+2
Panic() invokes printk() to add a \n internally, so panic arguments should not themselves end in \n. Panic invocations in arch/mips and elsewhere are inconsistently sometimes terminating in \n, sometimes not. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Mark cascade and low level interrupts IRQF_NO_THREADWu Zhangjin1-1/+2
Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25MIPS: AR7: Replace __attribute__((__packed__)) with __packedFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2491/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-07-25MIPS: AR7: Remove 'space before tabs' in platform.cFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-21MIPS: AR7: Fix trailing semicolon bug in clock.cFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: AR7: Fix GPIO register size for Titan variant.Florian Fainelli1-3/+1
The 'size' variable contains the correct register size for both AR7 and Titan, but we never used it to ioremap the correct register size. This problem only shows up on Titan. [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork recognizes the problem correctly then fails to fix it ...] Reported-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/2380/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner1-2/+2
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: AR7: Convert to new irq_chip functionsThomas Gleixner1-21/+21
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2174/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: AR7: Fix loops per jiffies on TNETD7200 devicesFlorian Fainelli2-6/+6
TNETD7200 run their CPU clock faster than the default CPU clock we assume. In order to have the correct loops per jiffies settings, initialize clocks right before setting mips_hpt_frequency. As a side effect, we can no longer use msleep in clocks.c which requires other parts of the kernel to be initialized, so replace these with mdelay. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: AR7: Add support for Titan (TNETV10xx) SoC variantFlorian Fainelli3-10/+300
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by: Xin Zhen <xlonestar2000@aim.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-10-29MIPS: AR7: Initialize GPIO earlierFlorian Fainelli2-2/+3
In order to detect the Titan variant, we must initialize GPIOs earlier since detection relies on some GPIO values to be set. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1562/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells1-0/+1
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: AR7: rewrite of cpmac_get_mac()Alexander Clouter1-27/+15
Shamelessly stealing wisdom from pasemi_mac.c, I found char2hex() could be replaced with a single call to sscanf(), looks cleaner to me at least. The result is 100 bytes trimmed off the size of a compiled cpmac_get_mac() and as an extra bonus it grumbles and gracefully fails over to using random_ether_addr() when an attempt to parse an invalid MAC address is made. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Cc: florian@openwrt.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Introduce support for Platform definitionsSam Ravnborg2-1/+6
Move platform specific definitions to the platfrom directories. Each platform shall do the following: 1) include an entry in arch/mips/Kbuild.platforms 2) add relevant definitions to arch/mips/<platform>/Platform This commits changes ar7 to the new scheme as an example. Introducing a platform speecific Platfrom file has following advantages: 1) decentralization of platfrom definitions 2) simplification af arch/mips/Makefile 3) force all platfrom to build with -Werror (done in arch/mips/Kbuild) [Ralf: Remove forgotten -Werror from AR7 Makefile] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1302/ Patchwork: http://patchwork.linux-mips.org/patch/1308/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: AR7: Use correct UART port typeFlorian Fainelli1-1/+1
PORT_AR7 has the correct TRIG flag (UART_FCR_R_TRIG_00) as well as UART_CAP_AFE being set. This fixes UART on TNETD7300 revision 0x02, which would otherwise mangle some characters, no side effects on other revisions. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1246/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-22MIPS: AR7: prevent race between clock initialization and devices registrationFlorian Fainelli1-1/+1
ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by: Michael J. Evans <mjevans1983@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1212/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-22MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base addressFlorian Fainelli1-12/+3
Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 11:30:54 +0300