summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2011-03-14omap4: mux: Remove duplicate mux modesTony Lindgren1-276/+6
Remove duplicate mux modes to make the binary smaller: text data bss dec hex filename 9378 24472 0 33850 843a mux44xx.o 9378 19104 0 28482 6f42 mux44xx.o Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-14omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flagDavid Cohen2-11/+5
Currently IOVMM driver sets IOVMF_DA_FIXED/IOVMF_DA_ANON flags according to input 'da' address when mapping memory: da == 0: IOVMF_DA_ANON da != 0: IOVMF_DA_FIXED It prevents IOMMU to map first page with fixed 'da'. To avoid such issue, IOVMM will not automatically set IOVMF_DA_FIXED. It should now come from the user throught 'flags' parameter when mapping memory. As IOVMF_DA_ANON and IOVMF_DA_FIXED are mutually exclusive, IOVMF_DA_ANON can be removed. The driver will now check internally if IOVMF_DA_FIXED is set or not. Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-14omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is setMichael Jones1-6/+7
commit c7f4ab26e3bcdaeb3e19ec658e3ad9092f1a6ceb allowed mapping the NULL address if da_start==0, which would then not get unmapped. Disallow this again if IOVMF_DA_ANON is set. And spell variable 'alignment' correctly. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-14plat-nomadik: make GPIO interrupts work with cpuidle ApSleepRabin Vincent2-17/+100
Enable wakeups by default for any GPIO interrupts and in the suspend/resume path narrow this down to only the the real wakeup interrupts. This approach is based on the assumption that cpuidle ApSleep will be entered more often than system suspend. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> [Fixup for genirq changes to struct irq_data on 2.6.38] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-u300: define a dummy filter function for coh901318Linus Walleij1-0/+7
All platform data has to be made conditional on as to avoid cluttering the code with other #ifdef:s. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij5-16/+81
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add hrefv60 GPIO pinsBibek Basu2-90/+200
This will centralize all GPIO pin muxing for the different boards in the MOP500 family to a single file. It also kills off the deprecated support for the ED (Early Drop) ASIC, this should never be spotted in the open and ST-Ericsson have internally deprecated this hardware. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Rebasing and kill old ASIC support] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent4-63/+84
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: fix compilation warningLinus Walleij1-5/+2
The compiler warns that [rf]wimsc may be used uninitialized in this function - the warning is actually false since the uses are in identical if()-clauses, but it can't hurt very much to read out the values to be modified early anyway and rid the warning. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: get rid of unused GPIO PM codeRabin Vincent2-79/+3
The NOMADIK_GPIO_PM config option is disabled by default, not user visible, and never selected by any other option: the code is therefore unused. The GPIO registers need not be saved and restored since their values are preserved when vAPE (on DB8500) is powered down. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: change sleep/wakeup setting in GPIO SLPM registerRikard Olsson1-1/+1
This patch fixes a bug when setting SLPM register for DB8500. When calling__nmk_gpio_set_slpm(...) offset to GPIO is now used instead of the GPIO number itself. Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: implement safe switch sequence for Alt-CRabin Vincent2-40/+172
Setting pinmux alternative C for a GPIO pin is actually not so easy since it ivolves setting value "1" in two registers, and since the combined result will take effect for intermediate values (01 or 10) this will cause glitches while you wrote one register but have not yet written the other. This patch implements a series of kludges including an optional machine-specific callback to avoid glitches when changing pin mux mode to alternative C. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: set altfunc to GPIO when enabling the sleep configRabin Vincent1-0/+2
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: type secondary IRQ correctlyVirupax Sadashivpetimath1-1/+1
Coverity found that we were checking an unsigned variable for >= zero. Type it correctly so that the check works as intended. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: pull-up/down settings for GPIO resumeJonas Aaberg2-24/+60
Suspend/resume didn't take care of pull-up and pull-down settings and writing back the DAT register at resume can change pull up/down settings, depending on pin input value. Output values are now also restored. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support secondary GPIO interruptsRabin Vincent2-6/+46
When GPIOs wake up the system from sleep mode, the normal GPIO interrupt handler does not hit and the normal interrupt status register does not contain the status. Instead the secondary GPIO handler does, and the interrupt status needs to be retrieved from the wakeup status saved by the suspend/resume code. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: implement suspend/resume for GPIORabin Vincent1-2/+49
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: add custom dbg_show for GPIORabin Vincent1-0/+92
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support varying number of GPIOs per blockRabin Vincent3-3/+4
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Added constant 32-pin assignment in platform data] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij8-33/+288
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-u300: config U300 PL180 PL011 PL022 for DMALinus Walleij3-29/+183
This will configure the platform data for the PL180, PL011 and PL022 PrimeCells found in the U300 to use DMA with the generic PrimeCell DMA engine for COH 901 318. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-u300: use mmci driver for GPIO card detectLinus Walleij1-135/+13
The mmci driver can handle a GPIO pin for card detect, using IRQs and all just fine, so switch to using that. Delete the old bogus input device hack, if userspace need to detect MMC cards it should use udev like everyone else. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db5500 devicesMian Yousaf Kaukab3-0/+44
- DMA tx and rx maps for usb channels are set to be configured at runtime - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db8500 devicesMian Yousaf Kaukab4-2/+64
- DMA tx and rx maps for usb channels are set to be configured at runtime - GPIO configurations for usb are added - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: update MUSB clock configurationsMian Yousaf Kaukab1-2/+2
MUSB driver has been updated to separate out BSP layer from its generic parts, as separate driver. This patch configures the clock with the new platform driver name. Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab3-1/+186
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix inverted SD-card GPIO pinPhilippe Langlais1-2/+2
The levelshifter pins were set to inverted values, fix this up. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: set sd/mmc clock rate to 100MHzPhilippe Langlais1-1/+1
The clock speed for the SD/MMC clock was incorrect, rectify it. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: Add Rohm BH1780GLI Light Sensor to i2c_board_infoLee Jones1-0/+4
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for LP5521 leds driverPhilippe Langlais1-1/+67
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for SFH7741 proximity sensor driverPhilippe Langlais2-0/+53
Proximity sensor is managed as an input event (SW_PROXIMITY). Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> [Named GPIO pin] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: delete old keypad board fileLinus Walleij2-230/+0
We register keypads per-UIB now, remove this. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add U8500 UIB platform dataSundar Iyer2-0/+100
The U8500 UIB contains a Synaptics RMI touchpanel and a matrix keyboard via the TC35893 port expander device. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add ST-UIB platform dataSundar Iyer2-0/+184
The ST-UIB contains a matrix keypad interfaced with the STMPE1601 port expander and a ROHM BU2101 touch panel. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: dynamic UIB (user interface boards) detectionRabin Vincent6-4/+173
Add support for dynamic detection of the UIB used (at the cost of one i2c error on the lesser-used UIB) and also provide an override via a command line parameter if needed. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix ux500 build errorSundar Iyer1-2/+2
Include ab8500 regulators for DB8500 SoC by default and fix build issues Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Small fixup for changed boardfiles] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add a few AB8500 regulator consumers v3Linus Walleij1-0/+62
Try to make the regulators a little bit more useful by adding some of the most basic consumers we're going to have in the end. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Rabin Vincent <rabin@rab.in> Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add DB5500 PMU resourcesLinus Walleij1-3/+25
This adds the PMU resources necessary to get perf working with the DB5500 ASIC. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-12Merge branch 'master' of ↵Russell King39-116/+222
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-tcc into devel-stable
2011-03-12Merge branch 'next-exynos4-pm' into for-nextKukjin Kim8-18/+724
Conflicts: arch/arm/mach-exynos4/include/mach/regs-pmu.h
2011-03-12ARM: EXYNOS4: Update HRT for supporting PMJaecheol Lee1-0/+16
This patch updates HRT driver for supporting PM. The resume function of PWM4 timer which is used clocksource is needed when kernel is resuming for restarting. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: EXYNOS4: Suspend to RAM SupportJaecheol Lee5-0/+547
This patch adds support suspend to ram for EXYNOS4210. As a note, this includes function of outer cache flush because it is used before entering PM. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: EXYNOS4: Add PMU and CMU Registers for PMJaecheol Lee2-11/+154
This patch adds definitions of PMU and CMU registers for EXYNOS4 PM. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12Merge branch 'next-exynos4' into next-exynos4-pmKukjin Kim75-1528/+3060
2011-03-12ARM: S5P: Add platform definitions for FIMC3Sylwester Nawrocki8-0/+76
Add support for fourth FIMC platform device definition and define resources for FIMC modules on EXYNOS4 machines. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Update defconfig for HRT supportSangbeom Kim6-2/+16
This patch updates s5pv210_defconfig and s5p64x0_defconfig for HRT support and CONFIG_S5P_HRT is used for its configuration. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Update machine of S5P64X0 and S5PV210 for HRTSangbeom Kim7-7/+21
This patch adds support HRT for machines of S5P64X0 and S5PV210. Basically, PWM Timer3 is used for clockevent and PWM Timer4 is used for clocksource. Since PWM Timer3 is used for other purpose, PWM Timer2 is used on SMDKV210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: HRT supportSangbeom Kim3-0/+489
This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clock source of S5P64X0 and S5PV210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: tegra: Add support for Tegra USB PHYsBenoit Goby4-0/+885
Interface used by Tegra's gadget driver and ehci driver to power on and configure the USB PHYs. Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selectedTony Lindgren3-0/+6
Fix compile when CONFIG_OMAP_MUX is not selected Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-12-24 09:17:39 +0300