summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2017-12-26ARM: dts: imx: rdu1: cosmetic changes to the audio nodesLucas Stach1-3/+3
This renames the audio device to "Front" in order to match the RDU2 naming, which makes it easier for a unified userspace to deal with both boards. Also rename the phandle for the headphone amplifier to more closely resemble the RDU2 DTS. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-wandboard-revd1: Make EDID functionalFabio Estevam1-0/+5
There are 0 ohm resistors that allow selecting the EDID I2C port to be I2C1 or I2C2. On revd1 the 0 ohm resistors are populated in such a way that the I2C2 is used as DDC I2C bus, so fix it accordingly. Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx: name the interrupts for the fec ethernet driverTroy Kisky5-4/+13
imx7s/imx7d has the ptp interrupt newly added as well. For imx7, "int0" is the interrupt for queue 0 and ENET_MII "int1" is for queue 1 "int2" is for queue 2 For imx6sx, "int0" handles all 3 queues and ENET_MII And of course, the "pps" interrupt is for the PTP_CLOCK_PPS interrupts This will help document what each interrupt does. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: RDU2: add i210 nodeLucas Stach1-0/+12
This is needed for the bootloader to patch in the correct MAC address. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg ↵Marco Franchi1-4/+10
property The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has a unit name, but no reg property Fix this warning by adding reg property from such node and, consequently, includes a mdio node into the fec node, with the 'address-cells' and 'size-cells' to avoid these other following warnings: Warning (reg_format): "reg" property in /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Tested-by: Lothar Waßmann <LW@karo-electronics.de> Acked-by: Lothar Waßmann <LW@karo-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: Add support for QSPI with ls1021a SoCSZ Lin1-0/+14
Add QSPI node support, and this function is disabled by default This setting could be overwritten in board-level definitions Signed-off-by: SZ Lin <sz.lin@moxa.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-23Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"Tony Lindgren1-4/+0
This reverts commit 4ece93c020e3ee19767b1c111be39fe7e32f8bf2. The device tree binding for these is still being discussed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-23ARM: davinci: Use PTR_ERR_OR_ZERO()Vasyl Gomonovych2-3/+3
Fix ptr_ret.cocci warnings: arch/arm/mach-davinci/devices-da8xx.c:255:8-14: WARNING: PTR_ERR_OR_ZERO can be used arch/arm/mach-davinci/devices-da8xx.c:300:8-14: WARNING: PTR_ERR_OR_ZERO can be used arch/arm/mach-davinci/dm646x.c:952:8-14: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-23ARM: davinci: make davinci_soc_info structures constBhumika Goyal6-6/+6
Make davinci_soc_info structures const as they are either passed to the function davinci_common_init having the argument as const or their field cpu_clks of type struct clk_lookup * is passed to the function davinci_clk_init. So, the fields are never modified and the structures can be const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> [nsekhar@ti.com: minor commit message adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-23ARM: davinci: make argument to davinci_common_init() as constBhumika Goyal2-2/+2
Make the function argument of the function davinci_common_init as const as it's memory contents are only copied during a memcpy call. So, the fields of the structure to which the argument soc_info points to never gets modified and therefore the argument can be made const. Add const to the prototype too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-22Merge branch 'docs-next' of git://git.lwn.net/linux into patchworkMauro Carvalho Chehab58-102/+126
* 'docs-next' of git://git.lwn.net/linux: (888 commits) w1_netlink.h: add support for nested structs scripts: kernel-doc: apply filtering rules to warnings scripts: kernel-doc: improve nested logic to handle multiple identifiers scripts: kernel-doc: handle nested struct function arguments scripts: kernel-doc: print the declaration name on warnings scripts: kernel-doc: get rid of $nested parameter scripts: kernel-doc: parse next structs/unions scripts: kernel-doc: replace tabs by spaces scripts: kernel-doc: change default to ReST format scripts: kernel-doc: improve argument handling scripts: kernel-doc: get rid of unused output formats docs: get rid of kernel-doc-nano-HOWTO.txt docs: kernel-doc.rst: add documentation about man pages docs: kernel-doc.rst: improve typedef documentation docs: kernel-doc.rst: improve structs chapter docs: kernel-doc.rst: improve function documentation section docs: kernel-doc.rst: improve private members description docs: kernel-doc.rst: better describe kernel-doc arguments docs: fix process/submit-checklist.rst Sphinx warning docs: ftrace-uses.rst fix varios code-block directives ...
2017-12-22arm64: allow ID map to be extended to 52 bitsKristina Martsenko1-0/+5
Currently, when using VA_BITS < 48, if the ID map text happens to be placed in physical memory above VA_BITS, we increase the VA size (up to 48) and create a new table level, in order to map in the ID map text. This is okay because the system always supports 48 bits of VA. This patch extends the code such that if the system supports 52 bits of VA, and the ID map text is placed that high up, then we increase the VA size accordingly, up to 52. One difference from the current implementation is that so far the condition of VA_BITS < 48 has meant that the top level table is always "full", with the maximum number of entries, and an extra table level is always needed. Now, when VA_BITS = 48 (and using 64k pages), the top level table is not full, and we simply need to increase the number of entries in it, instead of creating a new table level. Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> [catalin.marinas@arm.com: reduce arguments to __create_hyp_mappings()] [catalin.marinas@arm.com: reworked/renamed __cpu_uses_extended_idmap_level()] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-22arm64: handle 52-bit addresses in TTBRKristina Martsenko1-0/+2
The top 4 bits of a 52-bit physical address are positioned at bits 2..5 in the TTBR registers. Introduce a couple of macros to move the bits there, and change all TTBR writers to use them. Leave TTBR0 PAN code unchanged, to avoid complicating it. A system with 52-bit PA will have PAN anyway (because it's ARMv8.1 or later), and a system without 52-bit PA can only use up to 48-bit PAs. A later patch in this series will add a kconfig dependency to ensure PAN is configured. In addition, when using 52-bit PA there is a special alignment requirement on the top-level table. We don't currently have any VA_BITS configuration that would violate the requirement, but one could be added in the future, so add a compile-time BUG_ON to check for it. Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> [catalin.marinas@arm.com: added TTBR_BADD_MASK_52 comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22arm: dts: owl-s500: Add SparkyAndreas Färber2-1/+45
Add a Device Tree for the Allo.com Sparky SBC. Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net> [AF: Adjusted SPDX-License-Identifier style] Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu58-102/+126
Merge the crypto tree to pick up inside-secure fixes.
2017-12-22ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685Linus Walleij1-1/+62
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel to the DIR-685 device tree. This brings graphics to this funky router and it is possible to even run a console on its tiny screen. Incidentally this requires us to disable the access to the parallel (NOR) flash, as the communication pins to the panel are shared with the flash memory. To access the flash, a separate kernel with the panel disabled and the flash enabled should be booted. The pin control selecting whether to use the lines cannot be altered at runtime due to hardware constraints. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Add PCI to WBD111 and WBD222Linus Walleij2-0/+44
These two boards have mini-PCI card slots, so enable PCI on both of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Flags D-Link DIR-685 I2C bus gpiosLinus Walleij1-2/+2
These GPIOs are used in open drain mode, so make sure to flag them as such. Use the new separate scl/sda line GPIO bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU coreBiju Das1-0/+1
Add the missing clock to CA7 CPU1 node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-22ARM: dts: tango4: remove bogus interrupt-controller propertyArnd Bergmann1-1/+0
dtc points out that the parent node of the interrupt controllers is not actually an interrupt controller itself, and lacks an #interrupt-cells property: arch/arm/boot/dts/tango4-vantage-1172.dtb: Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/interrupt-controller@6e000 This removes the annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-22ARM: dts: ls1021a: fix incorrect clock referencesArnd Bergmann2-2/+2
dtc warns about two 'clocks' properties that have an extraneous '1' at the end: arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1]) Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1]) The clocks that get referenced here are fixed-rate, so they do not take any argument, and dtc interprets the next cell as a phandle, which is invalid. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21Merge tag 'v4.16-rockchip-dts32-1' of ↵Arnd Bergmann1-0/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner: Just the reset property for the rk3066a-rayeager emac phy * tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy
2017-12-21ARM: qcom_defconfig: Enable Frambuffer console supportSrinivas Kandagatla1-0/+1
This patch adds framebuffer console support to qcom defconfig. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21ARM: qcom_defconfig: enable MSM IOMMU for displaySrinivas Kandagatla1-0/+1
MSM IOMMU is required for apq8064 display, so enable it by default. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21ARM: qcom_defconfig: Enable DRM for 8064 displaySrinivas Kandagatla1-0/+1
This enables DRM Kconfig for apq8064 display. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21ARM: dts: msm8974-FP2: Add uSD slot nodesLuca Weiss1-0/+34
Add and enable the sdhci2 slot and the pinctrl configuration. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21Merge tag 'v4.15-next-soc' of ↵Arnd Bergmann1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger: - change kconfig entry for armv7 SoCs to be more generic - add support for mt2701 scpsys driver binding documentation extend driver to allow the bus protection to overwrite the register * tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: add MT2712 scpsys support soc: mediatek: add dependent clock jpgdec/audio for scpsys soc: mediatek: extend bus protection API dt-bindings: soc: add MT2712 power dt-bindings ARM: mediatek: use more generic prompts for SoCs with ARMv7
2017-12-21Merge tag 'v4.15-next-dts32' of ↵Arnd Bergmann4-4/+7
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger: - add reset cells mt2701 and mt7623 ethsys - update mmc nodes for mt7623 - mt7623 change mmc card detection pin to active low - mt7623 set unit address to lower case * tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: ARM: Mediatek: Fix ethsys documentation arm: mt7: dts: Remove leading 0x and 0s from bindings notation arm: dts: mt7623: fix card detection issue on bananapi-r2 arm: dts: mt7623: update mmc related nodes with the appropriate fallback arm: dts: mt2701: Add reset-cells arm: dts: mt7623: Update ethsys binding
2017-12-21Merge tag 'tegra-for-4.16-arm-dt' of ↵Arnd Bergmann1-0/+35
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding: These changes enable the video decoder engine found on Tegra20 SoCs. * tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add video decoder on Tegra20 ARM: tegra: Add device tree node to describe IRAM on Tegra20
2017-12-21Merge tag 'samsung-defconfig-4.16' of ↵Arnd Bergmann2-0/+12
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Pull "Samsung defconfig changes for v4.16" from Krzysztof Kozłowski: 1. Enable missing drivers for supported Exynos boards (PMU, CEC, MHL bridge, ASoC for Odroid XU3/XU4). 2. Enable Exynos IOMMU driver on exynos_defconfig. * tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Enable CONFIG_EXYNOS_IOMMU ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards
2017-12-21Merge tag 'samsung-dt-4.16' of ↵Arnd Bergmann18-223/+464
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DTS ARM changes for 4.16" from Krzysztof Kozłowski: 1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3). 2. Enable WiFi on Trats2. 3. Add CPU perf counters to Exynos54xx. 4. Add power domains to certain chipsets. 5. Add Exynos4412 ISP clock controller which finally solves freezes when accessing ISP clocks while having the ISP power domain turned off. 6. Add Pseudo and True RNG to Exynos5. 7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410. 8. Cleanup of some of DTC warnings * tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use lower case hex addresses in node unit addresses ARM: dts: exynos: Add nodes for True Random Number Generator ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCs ARM: dts: exynos: Add G3D power domain to Exynos5250 ARM: dts: exynos: Add audio power domain to Exynos5250 ARM: dts: exynos: Fix power domain node names for Exynos5250 ARM: dts: exynos: Add missing interrupt-controller properties to Exynos5410 PMU ARM: dts: exynos: Add audio power domain support to Exynos542x SoCs ARM: dts: exynos: Fix property values of LDO15/17 for Odroid XU3/XU4 ARM: dts: exynos: Add Exynos4412 ISP clock controller ARM: dts: exynos: Move G2D node to exynos5.dtsi ARM: dts: exynos: Add CPU perf counters to Exynos54xx boards ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5 ARM: dts: exynos: Add bcm4334 device node to Trats2 ARM: dts: exynos: Correct Trats2 panel reset line ARM: dts: exynos: Add sound support for Odroid XU4 ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding
2017-12-21Merge tag 'gemni-dts-1' of ↵Arnd Bergmann6-0/+299
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt Gemini DTS updates, take one * tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Add basic devicetree for D-Link DNS-313 ARM: dts: Add ethernet PHYs to the a bunch of Geminis
2017-12-21Merge tag 'omap-for-v4.15/defconfig-v2-signed' of ↵Arnd Bergmann1-0/+11
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "One old minor pull request pending" from Tony Lindgren: Few omap2plus_defconfig changes for v4.15 merge window to enable NEON based crypto and droid 4 USB PHY. * tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable droid 4 USB PHY ARM: omap2plus_defconfig: enable NEON based crypto
2017-12-21Merge tag 'omap-for-v4.16/dt-signed' of ↵Arnd Bergmann12-731/+735
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Dts related changes for omaps for v4.16 merge window" from Tony Lindgren: These changes are mostly improvments for various devices. Note that these are based on my earlier fixes branch omap-for-v4.15/fixes-dt to avoid a pointless merge conflict between a fix and removal. The summary of changes is: - Fix audio codec reset pin for am335x-pepper and n900, this has been always broken and won't get fixed until the related driver changes are also merged in for v4.16, so not urgent - Fix tps65917 powerhold property for dra76-evm - Changes to logicpd boards to remove MTD partition information and to add support for omap35xx variants by setting up common dts files for the logicpd boards - Disable dra7 USB metastability workaround, this won't do anything until the related driver changes are also merged into v4.16, so not urgent * tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit ARM: dts: Add minimal support for LogicPD OMAP35xx Torpedo devkit ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi ARM: dts: dra7: Add missing hdmi audio DMA channel information ARM: dts: dra7: Disable USB metastability workaround for USB2 ARM: dts: omap3: logicpd kits: Remove partition information ARM: dts: DRA76-EVM: Set powerhold property for tps65917 ARM: dts: omap3-n900: Fix the audio CODEC's reset pin ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
2017-12-21Merge tag 'omap-for-v4.16/dt-clk-signed' of ↵Arnd Bergmann34-2135/+1159
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Clock related dts changes for omaps for v4.16 merge window" from Tony Lindgren: This branch contains a series of dts changes from Tero Kristo to start using clkctrl clocks. Note that this branch is based on a merge of omap-for-v4.16/soc-signed and an immutable commit from Tero Kristo fe7020e64f04 ("clk: ti: omap4: clkctrl data fixes for opt-clocks") that is also in clk-next. * tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits) ARM: dts: dm816x: add clkctrl nodes ARM: dts: dm814x: add clkctrl nodes ARM: dts: am43xx: add clkctrl nodes ARM: dts: am33xx: add clkctrl nodes ARM: dts: dra7: add clkctrl nodes ARM: dts: omap5: add clkctrl nodes ARM: dts: omap4: add clkctrl nodes ARM: dts: dm816x: add bus functionality to base PRCM node ARM: dts: am43xx: add bus functionality to base PRCM node ARM: dts: am33xx: add bus functionality to base PRCM node ARM: dts: dra7: add bus functionality to base PRCM nodes ARM: dts: omap4: add bus functionality to base PRCM nodes ARM: dts: omap5: add bus functionality to base PRCM nodes ARM: dts: dm816x: add fck under timers1/2 ARM: dts: dm814x: add fck under timers1/2 ARM: dts: dra7: add fck under timer1 ARM: dts: am43xx: add fck under timers1/2 ARM: dts: am33xx: add fck under timers1/2 ARM: dts: omap4: add fck under timer1 ARM: dts: omap5: add fck under timer1 ...
2017-12-21Merge tag 'omap-for-v4.16/soc-signed' of ↵Arnd Bergmann10-64/+68
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "SoC changes for omaps for v4.16 merge window" from Tony Lindgren: For most part this is a series from Tero Kristo to prepare things for using clkctrl clocks with DTS data. The other changes are to make few data structures const. * tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: CM: make cm_ll_data structures as const ARM: OMAP2+: CM: make some pointers and function arguments as const ARM: DM816x: hwmod_data: fix clockdomain name for sata hwmod ARM: OMAP2+: hwmod: calculate physical register address on am33xx ARM: AM33xx: CM: add support for getting physical address for a register ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address API ARM: OMAP2+: hwmod: fix clkctrl address translation logic ARM: OMAP4: CMINST: add support for translating clkctrl addresses ARM: OMAP2+: CM: add support for getting phys address for a clkctrl register
2017-12-21Merge tag 'bk3' of https://github.com/sverdlin/ep93xx into next/socArnd Bergmann4-12/+170
Pull "ARM: ep93xx: ts72xx: Add support for BK3 board" from Alexander Sverdlin: This patch series adds support for Liebherr's BK3 board, being a derivative of TS72XX design. * tag 'bk3' of https://github.com/sverdlin/ep93xx: ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative ARM: ep93xx: ts72xx: cosmetic: Add some description to ts72xx code ARM: ep93xx: ts72xx: Rewrite ts72xx_register_flash() to accept parameters ARM: ep93xx: ts72xx: Provide include guards for ts72xx.h file
2017-12-21Merge tag 'davinci-fixes-for-v4.15' of ↵Arnd Bergmann2-13/+20
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes Pull "TI DaVinci fixes for v4.15" from Sekhar Nori: DaVinci fixes for v4.15 consiting of fixes to make EDMA and MMC/SD work on DM365 and a fix for battery voltage monitoring on Lego EV3. * tag 'davinci-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: fix mmc entries in dm365's dma_slave_map ARM: dts: da850-lego-ev3: Fix battery voltage gpio ARM: davinci: Add dma_mask to dm365's eDMA device ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
2017-12-21Merge tag 'at91-ab-4.15-dt-fixes' of ↵Arnd Bergmann1-0/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Pull "Fixes for 4.15:" from Alexandre Belloni: - tse850-3: fix an i2c timeout issue * tag 'at91-ab-4.15-dt-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
2017-12-21Merge tag 'v4.15-rockchip-dts32fixes-1' of ↵Arnd Bergmann2-1/+5
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "Rockchip dts32 fixes for 4.15" from Heiko Stübner: Removed another trailing interrupt-cell 0 and added the cpu regulator on the rk3066a-marsboard to make it not fail from cpufreq changes. * tag 'v4.15-rockchip-dts32fixes-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix rk3288 iep-IOMMU interrupts property cells ARM: dts: rockchip: add cpu0-regulator on rk3066a-marsboard
2017-12-21ARM: dts: am572x-idk: Add cpu0 vdd supplyDave Gerlach1-0/+4
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am571x-idk: Add cpu0 vdd supplyDave Gerlach1-0/+4
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supplyDave Gerlach1-0/+4
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7-evm: Add cpu0 vdd supplyDave Gerlach1-1/+1
Add vdd-supply as smps123_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supplyDave Gerlach1-1/+1
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Enable 1.5 GHz operation for the CPUDave Gerlach1-0/+7
After ti-opp-supply driver is in place to provide AVS Class0 and abb regulator scaling support let's enable 1.5GHz for the cpu. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add MPU OPP supply nodeDave Gerlach1-0/+13
Add the OPP supply node for the MPU voltage rail to provide the information needed by the ti-opp-supply driver to enable AVS Class 0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add vbb-supply to cpu and additional voltagesDave Gerlach1-2/+7
Add a vbb-supply phandle to the cpus node and also add an additional triplet of voltages for each OPP in the operating-points-v2 table to make use of the multi regulator support in the OPP core and provide the vbb regulator for use by the ti-opp-supply driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21Merge tag 'amlogic-dt' of ↵Arnd Bergmann3-14/+40
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT changes for v4.16" from Kevin Hilman: - meson8: GPIO IRQ support - switch to stable UART bindings w/correct clock - add more L2 cache settings - drop unused ADC clock * tag 'amlogic-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: meson: enable MESON_IRQ_GPIO also for MACH_MESON8 ARM: dts: meson8: enable the GPIO interrupt controller ARM: dts: meson8b: use stable UART bindings with correct gate clock ARM: dts: meson8: use stable UART bindings with correct gate clock ARM: dts: meson: drop "sana" clock from SAR ADC ARM: dts: meson8: add more L2 cache settings ARM: dts: meson8b: add more L2 cache settings
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:47:04 +0300