summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2017-12-26ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematicRussell King2-34/+56
Make the regulators match the schematic - name the regulators after one of their schematic supply names, and arrange them into their heirarchy. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMCRussell King3-0/+120
Add support for the v1.5 SOM with TI Wi-Fi and eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMCRussell King3-0/+118
Add support for the v1.5 SOM with TI Wi-Fi but without eMMC. As the pinmux settings are different for the microsom, we need to use a separate board-level dts for this as there is no support for overlays. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-hummingboard2: add PWM3 supportRussell King1-0/+12
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: split out eMMC supportRussell King4-26/+74
eMMC is optional on HB2 boards, and may be implemented by the SOM. Move it out of the base HB2 include file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: rework regulatorsLucas Stach1-14/+14
Name the regulators according to the voltage rails they are feeding in the schematic. The USB 2-4 regulators are fixed regulators and are always on, as they are not a VBUS supply for a single USB host port on the i.MX6, but supply VBUS to ports behind a USB hub and there is currently no way to model this in mainline. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: remove redundant PWM disablesLucas Stach1-8/+0
The PWM nodes are already disabled in the imx6qdl.dtsi, so there is no need to disable them again in the board DTS. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: remove non-mainline property from RTCLucas Stach1-1/+0
Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: fix PCIe reset polarityLucas Stach1-1/+1
The driver always uses active-low, but better describe reality in the DT. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: remove LDB nodeLucas Stach1-9/+0
It's disabled by default and the data mapping is supposed to be retrieved from the attached panel driver in mainline. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: add SGTL5000 VDDD supplyLucas Stach1-0/+1
VDDD is supplied by VCC_1P8 on HB2. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: fix formattingLucas Stach1-6/+4
Trivial formatting change. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: convert to more conventional vmmc-supplyRussell King1-7/+19
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: use proper gpio flags definitionsRussell King1-5/+5
Use proper gpio flag definitions for GPIOs rather than using opaque uninformative numbers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: fix SD card detectRussell King1-2/+2
Fix the SD card detect signal, which was missing the polarity specification, and the pull-up necessary for proper signalling. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: add Broadcom Wi-Fi includeRussell King2-0/+2
The Broadcom Wi-Fi was moved out to a separate include file. Add the include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: move microsom includes into .dtsRussell King3-1/+2
Move the microsom includes into the .dts files. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-hummingboard2: rename microsom includeRussell King1-1/+1
Rename microsom include to imx6qdl-sr-som. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6*-hummingboard2: remove ar8035 includeRussell King1-1/+0
Remove the AR8035 include, the file is now gone. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: add HummingBoard2 boardsJon Nettleton4-0/+651
This adds support for the Hummingboard Gate and Edge devices from SolidRun. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: TS-4600: add basic device treeSebastien Bourdelin2-0/+80
These device trees add support for the TS-4600 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4600 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: TS-7970: add basic device treeSebastien Bourdelin4-0/+700
These device trees add support for TS-7970 by Technologic Systems. More details here: https://wiki.embeddedarm.com/wiki/TS-7970 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) supportStefan Agner5-1/+108
Add support for the Computer on Module Colibri iMX7D 1GB along with the Colibri Evaluation Board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: add MCP2515 CAN controllerStefan Agner2-1/+37
The Colibri Evaluation Carrier Board provides a MCP2515 CAN controller connected via SPI. Note that the i.MX 7 provides an internal CAN controller which is much better suited for CAN operations. Using the MCP2515 with a Colibri iMX7 module is mainly useful to test the SPI interface. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: specify backlight GPIOStefan Agner1-1/+9
The Colibri standard defines SODIMM 71 as backlight enable GPIO. Assign the GPIO to the backlight node in the module level device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: specify usdhc1 suppliesStefan Agner2-0/+2
The usdhc1 controller instance is used to provide the default SD/MMC capabilities of the Colibri standard. The IO pins are supplied to the SoC on the module whereas the SD-card is powered by the Carrier Board supply. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: specify cpu-supplyStefan Agner1-1/+1
Specify CPU supply using the "cpu-supply" property instead of the invalid "arm-supply" property. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: use NAND_CE1 as GPIOStefan Agner1-1/+1
All Colibri iMX7 SKUs use either single-die NAND or eMMC, hence NAND_CE1 is not used on the module and can be used as a GPIO by carrier boards. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: mux pull-ups where appropriateStefan Agner1-10/+10
Use pull-ups instead of pull-downs for the pins which are already pulled-up externally. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: make sure multiplexed pins are not activeStefan Agner1-0/+2
The Colibri pins PWM<A> and <D> are multiplexed on the module, make sure the secondary SoC pin is not active. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7-colibri: move and rename USB Host power regulatorStefan Agner3-13/+13
The Colibri default which enables USB Host power is not necessarily tied to the OTG2 controller, some carrier board use the pin to control USB power for both controllers. Hence name the pinctrl group more generic. Also move the regulator to the generic eval-v3 device tree since the regulator is always on the carrier board. In the Colibri iMX7S case the regulator is just not used. This allows to reuse the regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sl-evk: Convert from fbdev to drm bindingsMarco Franchi1-24/+24
It is preferred to use the panel compatible string rather than passing the LCD timing in the device tree. So pass the "sii,43wvf1g" compatible string which describes the parallel LCD. Also, pass the 'backlight' property as described in Documentation/devicetree/bindings/display/panel/simple-panel.txt Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sl-evk: Rearrange the regulators nodeMarco Franchi1-48/+37
It is not recommended to place regulators inside "simple-bus", so move them out. The motivation for doing this is to make it easier to adding new regulators. Signed-off-by: Marco Franchi <marcofrk@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sx-sdb: Convert from fbdev to drm bindingsMarco Franchi1-24/+24
It is preferred to use the panel compatible string rather than passing the LCD timing in the device tree. So pass the "sii,43wvf1g" compatible string, which describes the parallel LCD. Also pass the 'backlight' property as described in Documentation/devicetree/bindings/display/panel/simple-panel.txt Signed-off-by: Marco Franchi <marcofrk@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: colibri/apalis: use correct compatible for RTCStefan Agner6-6/+6
All Toradex Carrier Boards use a st,m41t0 compatible RTC. Compared to a st,m41t00 this RTC has also an oscillator fail bit which allows to detect when the RTC lost track of time. Cc: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: Specify interrupt-affinity for pmu nodeEsben Haabendal1-0/+1
This avoids the warning hw perfevents: no interrupt-affinity property for /pmu, guessing. Signed-off-by: Esben Haabendal <eha@deif.com> [RV: adapt commit log to the warning emitted in current mainline] Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: Add label to USB controllersEsben Haabendal1-2/+2
Add usb2 and usb3 labels to USB2 and USB3 controller device tree nodes, for easier modification in board dts files. Signed-off-by: Esben Haabendal <eha@deif.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: add reboot node to .dtsiRasmus Villemoes1-0/+7
The LS1021A can be reset via the dcfg regmap in the same way as the arm64 layerscape SoCs, so add the corresponding DT node. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx51-babbage: Pass the USB PHY regulatorFabio Estevam1-0/+9
The USB PHYs are supplied via MC13892 VUSB regulator rail, so properly describe this in the device tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-zii-rdu2: Remove device_type from PCI subnodeFabio Estevam1-1/+0
device_type = "pci" should be used for the SoC level PCI controller and it is already present at imx6qdl.dtsi. Remove it from the subnode in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_bridge): Node /soc/pcie@1ffc000/pci@0 missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_bridge): Node /soc/pcie@1ffc000/pci@0 missing bus-range for PCI bridge arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6ul-14x14-evk: Move regulators out of simple-busFabio Estevam1-12/+7
It is not recommended to place regulator nodes inside simple-bus, so move them out in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6ul-14x14-evk.dtb: Warning (simple_bus_reg): Node /regulators/sd1_regulator missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-nitrogen6_max: Remove unneeded unit addressFabio Estevam1-5/+5
Remove the unneeded unit address for the i2cmux nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6q-nitrogen6_max.dtb: Warning (unit_address_vs_reg): Node /i2cmux@2 has a unit name, but no reg property arch/arm/boot/dts/imx6q-nitrogen6_max.dtb: Warning (unit_address_vs_reg): Node /i2cmux@3 has a unit name, but no reg property While at it, rename the i2cmux nodes and subnodes to make it clearer to which i2c controller the mux belongs to. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6q-h100: Remove unneeded unit addressFabio Estevam1-2/+2
Remove the unneeded unit address for the port nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6q-h100.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/i2c@21a0000/tc358743@f/port@0 has a unit name, but no reg property arch/arm/boot/dts/imx6q-h100.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@0 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-colibri: Remove unneeded reg propertyFabio Estevam1-1/+0
As described in Documentation/devicetree/bindings/input/touchscreen/stmpe.txt there is no 'reg' property under stmpe_touchscreen, so remove it to fix the following build warning with W=1: arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/i2c@21a4000/stmpe811@41/stmpe_touchscreen has a reg or ranges property, but no unit name Cc: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-apalis: Remove unneeded reg propertyFabio Estevam1-1/+0
As described in Documentation/devicetree/bindings/input/touchscreen/stmpe.txt there is no 'reg' property under stmpe_touchscreen, so remove it to fix the following build warning with W=1: arch/arm/boot/dts/imx6q-apalis-eval.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/i2c@21a4000/stmpe811@41/stmpe_touchscreen has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-aristainetos: Move display node out of 'soc'Fabio Estevam2-51/+47
Move disp0 node from soc node to root node. disp0 node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (simple_bus_reg): Node /soc/disp0 missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-aristainetos: Move regulators out of simple-busFabio Estevam2-79/+70
It is not recommended to place regulator nodes inside simple-bus, so move them out in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (unit_address_vs_reg): Node /regulators/regulator@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (unit_address_vs_reg): Node /regulators/regulator@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (unit_address_vs_reg): Node /regulators/regulator@2 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (unit_address_vs_reg): Node /regulators/regulator@3 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-apf6dev: Move regulators out of simple-busFabio Estevam1-24/+20
It is not recommended to place regulator nodes inside simple-bus, so move them out in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /regulators/3p3v missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /regulators/usb-h1-vbus missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /regulators/usb-otg-vbus missing or empty reg/ranges property Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53-tx53-x03x: Move display node out of 'soc'Fabio Estevam1-117/+115
Move disp0 node from soc node to root node. disp0 node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx53-tx53-x03x.dtb: Warning (simple_bus_reg): Node /soc/disp0 missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53-m53: Remove unneeded reg propertyFabio Estevam1-1/+0
As described in Documentation/devicetree/bindings/input/touchscreen/stmpe.txt there is no 'reg' property under stmpe_touchscreen, so remove it to fix the following build warning with W=1: arch/arm/boot/dts/imx53-m53evk.dtb: Warning (unit_address_vs_reg): Node /soc/aips@60000000/i2c@63fc4000/stmpe610@41/stmpe_touchscreen has a reg or ranges property, but no unit name Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 11:52:55 +0300