summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King57-277/+277
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Remove DEBUG_WAITQRussell King41-44/+0
DEBUG_WAITQ appears to have been removed by others, but no one removed the configuration option from ARM. Remote it from both Kconfig.debug and all default configurations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Convert apm.c to use mutexes instead of semaphoresRussell King1-14/+14
More semaphore-as-mutex to mutex conversions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Include asm/elf.h instead of asm/procinfo.hRussell King25-23/+22
These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Fix "apm -s" command hangRussell King1-1/+8
Fix an apparant hang with the "apm -s" command. We omitted to wake up this process once resume had completed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Improve reliability of APM-emulation suspendRussell King1-55/+123
The APM emulation can sometimes cause suspend to fail to work due to apparantly waiting for some process to acknowledge an event when it actually has already done so. We re-jig the event handling to work around this behaviour. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-26[ARM] Export smp_call_function()Russell King1-0/+1
smp_call_function() will be used with the MP/core oprofile support patch. Export it as _GPL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-26[ARM] Add PM_LEGACY defaultsRussell King10-0/+10
Eliminate two warnings: kernel/power/pm.c:205: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:64) kernel/power/pm.c:206: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:180) by updating defconfig files to contain a sensible PM_LEGACY default. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-23[ARM] 3942/1: ARM: comment: consistent_sync should not be called directlyDan Williams1-0/+3
/* * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-20[ARM] ebsa110: fix warnings generated by asm/arch/io.hRussell King1-4/+4
Remove two warnings: drivers/serial/8250_early.c:136: warning: unused variable 'mapsize' include/linux/io.h:47: warning: passing argument 1 of '__readb' discards qualifiers from pointer target type Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-20[ARM] 3933/1: Source drivers/ata/KconfigMartin Michlmayr1-0/+2
ARM doesn't source drivers/Kconfig like most architectures do, so the newly added drivers/ata is currently not made available on ARM. SATA is used on some ARM machines, like the Thecus N2100, so we need to source drivers/ata/Kconfig. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-14[ARM] Remove OP_MAX_COUNTERRussell King1-2/+0
OP_MAX_COUNTER never referenced, and is a reminant of an earlier oprofile implementation. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-12[ARM] Remove PM_LEGACY=y from selected ARM defconfigsRussell King6-9/+7
Most ARM defconfigs don't actually need to have PM_LEGACY enabled. Disable it for ATEB9200, Collie, IXP4xx, OMAP H2, S3C2410 and Versatile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-09[ARM] 3857/2: pnx4008: add devices' registrationVitaly Wool1-0/+69
This patch adds platform devices' registration for the devices which drivers either have been added to the mainline or on the way to. arch/arm/mach-pnx4008/core.c | 69 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-07[ARM] 3927/1: Allow show_mem() to work with holes in memory map.Ray Lehtiniemi1-27/+34
show_mem() was not correctly handling holes in the memory map. It was treating the freed sections of the map as though they contained valid struct page entries. This could cause incorrect debugging output or even a kernel panic. This patch keeps the struct meminfo around after system initialization so that show_mem() can use it when scanning memory. show_mem() now walks over each bank of each online node, rather than assuming that each node contains a single contiguous bank. Signed-off-by: Ray Lehtiniemi <rayl@mail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-07[ARM] 3926/1: make timer led handle HZ != 100David Brownell1-2/+2
The timer LED is unusable at HZ=large, since it's got a hard-wired value of 100 ticks per cycle; when HZ=1024 (for example) it's essentially always-on. This patch just makes that be HZ ticks per cycle. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3923/1: S3C24XX: update s3c2410_defconfig with new driversBen Dooks1-6/+59
Add the new drivers, such as SPI, LED and RTC core, to the s3c2410_defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.irg> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3922/1: S3C24XX: update s3c2410_defconfig to 2.6.19-rc4Ben Dooks1-15/+34
Update the s3c2410_defconfig to 2.6.19-rc4 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3921/1: S3C24XX: remove bast_defconfigBen Dooks1-947/+0
Remove the bast_defconfig, as it has not been updated since 2.6.13. The s3c2410_defconfig should be a good replacement. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3920/1: S3C24XX: Remove smdk2410_defconfigBen Dooks1-735/+0
Remove the smdk2410_defconifg as it is out of data and has not been touched since 2.6.11. Use the s3c2410_defconfig instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3918/1: ixp4xx irq-chip reworkKevin Hilman1-38/+22
This is a rework of the ixp4xx irq_chip implementation. The use of two irq_chip structures and potentially switching between them is a violation of the intended use of the IRQ framework. The current implementation does not work with current in-kernel spinlock debugging or lockdep due to lock recursion problems caused by calling set_irq_chip/handler from within the chip's set_irq_type(). This patch goes back to using one irq_chip structure and handling the differences between edge/level, normal/GPIO interrupts inside the ack/mask/unmask routines themselves. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3912/1: Make PXA270 advertise HWCAP_IWMMXT capabilityPaul Gortmaker2-1/+5
ARM patch 3756/1 added HWCAP_IWMMXT. This patch adds support for broadcasting that info via /proc/cpuinfo and sets it for the CPU features of the PXA270. I've booted 19rc3 on a pxa270 and confirmed that the /proc/cpuinfo shows "iwmmxt" in the Features. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3915/1: S3C2412: Add s3c2410_gpio_getirq() to general gpio.cBen Dooks2-20/+20
s3c2410_gpio_getirq() holds for the S3C2412 build, so ensure that it gets built for all the current S3C24XX architectures Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3917/1: Fix dmabounce symbol exportsKevin Hilman1-1/+2
dma_sync_single is no more (and to be removed in 2.7) so this export should be dma_sync_single_for_cpu. Also export dma_sync_single_for_device. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-30[ARM] 3914/1: [Jornada7xx] - Typo Fix in cpu-sa1110.c (b != B)Kristoffer Ericson1-1/+1
"K4S281632b-1H" should read "K4S281632B-1H" (As it does everywhere else). No more coffe! Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] 3913/1: n2100: fix IRQ routing for second ethernet portLennert Buytenhek1-1/+1
The second ethernet port on the Thecus n2100 was incorrectly assigned to XINT1 instead of the correct XINT3 (PCI INTB instead of INTD), which caused that port to be non-functional. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] Add KBUILD_IMAGE target supportRussell King1-2/+4
Add support for KBUILD_IMAGE on ARM. This takes the usual target specifiers (zImage/Image/etc) in the same way that powerpc does (iow, without the arch/arm/boot prefix). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] 3900/1: Fix VFP Division by Zero exception handling.Takashi Ohmasa1-0/+1
The SIGFPE signal should be generated if Division by Zero exception is detected. Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] 3899/1: Fix the normalization of the denormal double precision number.Takashi Ohmasa1-1/+1
The significand should be shifted until the value of bit [62] is 1 to normalize the denormal double number. Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] Add realview SMP default configurationRussell King1-0/+994
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] Fix SMP irqflags supportRussell King2-9/+14
The IRQ changes a while back broke the build for SMP machines. Fix up the SMP code to use set_irq_regs/get_irq_regs as appropriate. Also, fix a warning in arch/arm/kernel/time.c where 'regs' becomes unused for SMP builds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton1-7/+1
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-24[ARM] Comment out missing configuration symbolsRussell King1-2/+2
HAS_TOUCHSCREEN_ADS7843_LH7 and HAS_TOUCHSCREEN_ADC_LH7 are referenced but not defined in the LH7A40x configuration. Comment them out to prevent them causing warnings. Marc Singer said: Feel free to remove the Kconfig lines. I'll add it back with the rest of the config entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-24[ARM] Fix breakage in 7281c248f797723f66244b7ecef204620f664648Russell King1-2/+2
A couple of missing semicolons. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds6-6/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (33 commits) [WATCHDOG] remove experimental on iTCO_wdt.c [WATCHDOG] Atmel AT91RM9200 rename. [WATCHDOG] includes for sample watchdog program. [WATCHDOG] watchdog/iTCO_wdt: fix bug related to gcc uninit warning [WATCHDOG] add ich8 support to iTCO_wdt.c (patch 2) [WATCHDOG] add ich8 support to iTCO_wdt.c [WATCHDOG] ioremap balanced with iounmap for drivers/char/watchdog/s3c2410_wdt.c [WATCHDOG] w83697hf/hg WDT driver - Kconfig patch [WATCHDOG] w83697hf/hg WDT driver - autodetect patch [WATCHDOG] w83697hf/hg WDT driver - patch 16 [WATCHDOG] w83697hf/hg WDT driver - patch 15 [WATCHDOG] w83697hf/hg WDT driver - patch 14 [WATCHDOG] w83697hf/hg WDT driver - patch 13 [WATCHDOG] w83697hf/hg WDT driver - patch 12 [WATCHDOG] w83697hf/hg WDT driver - patch 11 [WATCHDOG] w83697hf/hg WDT driver - patch 10 [WATCHDOG] w83697hf/hg WDT driver - patch 9 [WATCHDOG] w83697hf/hg WDT driver - patch 8 [WATCHDOG] w83697hf/hg WDT driver - patch 7 [WATCHDOG] w83697hf/hg WDT driver - patch 6 ...
2006-10-20[PATCH] one more ARM IRQ fixAdrian Bunk1-1/+1
Fix one more compile breakage caused by the post -rc1 IRQ changes. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[ARM] switch to new pci_get_bus_and_slot APIAlan Cox3-6/+13
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-17[ARM] Update mach-typesRussell King1-2/+16
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-15[ARM] Fix fallout from IRQ regs changesRussell King3-2/+4
Some ARM platforms were still broken as a result of the IRQ register passing changes, mostly due to a missing linux/irq.h include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-14[ARM] 3889/1: [Jornada7xx] Addition of correct SDRAM params into cpu-sa1110.cKristoffer Ericson1-0/+10
This adds correct sdram params for K4S281632B-1H and sets the jornada to use them by default. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-14[WATCHDOG] Atmel AT91RM9200 rename.Andrew Victor6-6/+6
The new Atmel AT91SAM9261 and AT91SAM9260 processors use a different internal watchdog peripheral. This watchdog driver is therefore AT91RM9200-specific. This patch renames at91_wdt.c to at91rm9200_wdt.c, and changes the name of the configuration option. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-11[PATCH] remove bogus arch-specific syscall exportsAl Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] arm-versatile iomem annotationsAl Viro2-18/+18
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] arm __user annotationsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09IRQ: Use the new typedef for interrupt handler function pointersDavid Howells8-9/+9
Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09[PATCH] arm: it's OK to pass pointer to volatile as iounmap() argument...Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-07ARM: fix up nested irq regs usageLinus Torvalds1-1/+2
This should fix up the per-cpu irq register pointer if we have nested hardware interrupts. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] ixp4xxdefconfig arm fixesFrederik Deweerdt1-1/+2
With the following patch, the ixp4xxdefconfig builds correctly. I'll test some more configs if I get some time. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds90-309/+260
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] atmel_serial: Pass fixed register mappings through platform_dataHaavard Skinnemoen1-0/+1
In order to initialize the serial console early, the atmel_serial driver had to do a hack where it compared the physical address of the port with an address known to be permanently mapped, and used it as a virtual address. This got around the limitation that ioremap() isn't always available when the console is being initalized. This patch removes that hack and replaces it with a new "regs" field in struct atmel_uart_data that the board-specific code can initialize to a fixed virtual mapping for platform devices where this is possible. It also initializes the DBGU's regs field with the address the driver used to check against. On AVR32, the "regs" field is initialized from the physical base address when this it can be accessed through a permanently 1:1 mapped segment, i.e. the P4 segment. If regs is NULL, the console initialization is delayed until the "real" driver is up and running and ioremap() can be used. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 15:33:31 +0300