summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-06-12ARM: dts: imx6q-dhcom: Fix ethernet reset time propertiesChristoph Niedermaier1-2/+2
Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: imx: add smp support for imx7dAnson Huang7-11/+136
Add SMP support for i.MX7D, including CPU hotplug support, for systems where TFA is not present. The motivation for bringing up the second i.MX7D core inside the kernel is that legacy vendor bootloaders usually do not implement PSCI support. This is a significant blocker for systems in the field that are running old bootloader versions to upgrade to a modern mainline kernel version, as only one CPU of the i.MX7D would be brought up. Bring up the second i.MX7D core inside the kernel to make the migration path to mainline kernel easier for the existing iMX7D users. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com> # Fix merge conflicts Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> # heavy cleanup Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: imx6q: drop of_platform_default_populate() from init_machineMarco Felsch1-3/+0
Dropping the machine_init specific of_platform_default_populate() can be done safely due to the following two facts: 1) Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus") we have a common method to populate the devices. 2) The machine_init code don't need bounded devices<>drivers since the code uses syscon_regmap_lookup_by_compatible() which register a syscon device on demand. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-11ARM: exynos_defconfig: restore framebuffer supportMarek Szyprowski1-0/+1
Commit f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") changed the Kconfig dependencies, so COFNIG_FB is no longer selected in defconfigs. Restore support for it in exynos_defconfig, because most Exynos platforms had graphical console running on framebuffer device emulated on the Exynos DRM drivers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210611100204.6240-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-11ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configuredTony Lindgren1-0/+40
If the PM related modules are not loaded and PM firmware not configured, the system suspend fails to resume. Let's fix this by adding initial platform_suspend_ops to block suspend and warn about missing modules. When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted with it's firmware, pm33xx sets up working platform_suspend_ops. Note that we need to configure at least PM_SUSPEND_STANDBY to have suspend_set_ops(). Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: OMAP2+: remove duplicated prototypeAlejandro Lucero1-1/+0
The am33xx_init_early prototype is defined twice. Signed-off-by: Alejandro Lucero <alucero@os3sl.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-2/+2
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-1/+1
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: dra7x-evm: Drop "ti,pcf8575"Geert Uytterhoeven3-8/+8
The TI part is equivalent to the NXP part and its compatible value is not documented in the DT bindings. All other users of similar I2C GPIO expanders just use the compatible values of the original NXP parts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: am33xx: Drop interrupt property from ecap nodesLokesh Vutla1-6/+0
Interrupts were never supported by ecap driver and the bindings were never documented.Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: Fix node name for all ecap dt nodesLokesh Vutla7-15/+15
dtbs_check produces the following warning for ecap node name: ecap@100: $nodename:0: 'ecap@100' does not match '^pwm(@.*|-[0-9a-f])*$' Fix this by replacing ecap with pwm in node name Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodesLokesh Vutla3-18/+9
ti,am33xx-ecap is used to represent device nodes using ti,hwmod data. Now that hwmod entries are entirely removed, drop usage of ti,am33xx-ecap compatible from all DT nodes. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: ti: drop usage of redundant compatibleLokesh Vutla3-22/+11
Commit 229110c1aa691 ("ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings") added ti,am3352-ehrpwm compatible which is similar to ti,am33xx-ehrpwm but without out t,hwmod properties. But with commit 58bfbea5b1c68 ("ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes") dropped support for all ti,hwmod for ehrpwm, but missed deprecating ti,am33xx-ehrpwm compatible. So drop ti,am33xx-ehrpwm from DT as it is no longer needed. ti-ehrpwn driver still support ti,am33xx-ehrpwm in order to maintain backward compatibility. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: omap2/3: Drop dmas property from I2C nodeVignesh Raghavendra3-14/+0
DMA was never supported by i2c-omap driver and the bindings were never documented. Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11ARM: dts: dra7: Fix duplicate USB4 target module nodeGowtham Tammana5-78/+50
With [1] USB4 target-module node got defined in dra74x.dtsi file. However, the earlier definition in [2] was not removed, and this duplication of the target module is causing boot failure on dra74 variant boards - dra7-evm, dra76-evm. USB4 is only present in DRA74x variants, so keeping the entry in dra74x.dtsi and removing it from the top level interconnect hierarchy dra7-l4.dtsi file. This change makes the USB4 target module no longer visible to AM5718, DRA71x and DRA72x so removing references to it in their respective dts files. [1]: commit c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") [2]: commit 549fce068a311 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data") Fixes: c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") Signed-off-by: Gowtham Tammana <g-tammana@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-10ARM: dts: stm32: fix stpmic node for stm32mp1 boardsAlexandre Torgue4-18/+6
On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are: -"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoMMarek Vasut2-2/+2
Fix the following dtbs_check warning: spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoMMarek Vasut1-1/+1
Fix the following dtbs_check warning: eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoMMarek Vasut1-1/+0
Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supplyGrzegorz Szymaszek1-1/+1
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: add a new DCMI pins group on stm32mp15Grzegorz Szymaszek1-0/+33
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was incompatible with the pins used on the Odyssey board, where: - there are 8 data pins instead of 12, - DCMI_HSYNC is available at PA4 instead of PH8, - DCMI_D0 is at PC6 instead of PH9, - DCMI_D3 is at PE1 instead of PH12, - DCMI_D4 is at PE11 instead of PH14, - DCMI_D5 is at PD3 instead of PI4, - DCMI_D6 is at PE13 instead of PB8, - DCMI_D7 is at PB9 instead of PE6. Add the DCMI pins used on the Odyssey board as a new DCMI pin state definition, dcmi-1, AKA phandle dcmi_pins_b. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7Alexandre Torgue1-1/+1
It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warningsAlexandre Torgue4-79/+71
Update node name to avoid a DT schema validation issue seen with "make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-06-10genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()Marc Zyngier1-1/+21
Despite the name, handle_domain_irq() deals with non-irqdomain handling for the sake of a handful of legacy ARM platforms. Move such handling into ARM's handle_IRQ(), allowing for better code generation for everyone else. This allows us get rid of some complexity, and to rearrange the guards on the various helpers in a more logical way. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-10ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-09Merge tag 'tags/bcm2835-dt-next-2021-06-08-v2' into devicetree/nextFlorian Fainelli22-96/+156
- Fixup MMC node names - Fixup led node names - Introduce new devicetree file for Raspberry Pi 400 - Introduce devicetree bindings for Raspberry Pi 400 - Fix issue with dwc2's FIFO's size - Add VEC compatible for bcm2711 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-06-09ARM: dts: am43xx-clocks: add spread spectrum supportDario Binacchi1-6/+6
Registers for adjusting the spread spectrum clocking (SSC) have been added. As reported by the TI spruhl7x RM, SSC is supported only for LCD and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR, PER, DISP, EXTDEV). Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210606202253.31649-5-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-09ARM: dts: am33xx-clocks: add spread spectrum supportDario Binacchi1-5/+5
Registers for adjusting the spread spectrum clocking (SSC) have been added. As reported by the TI spruh73x RM, SSC is supported only for LCD and MPU PLLs, but the CM_SSC_DELTAMSTEP_DPLL_XXX and CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR, PER, DISP). Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210606202253.31649-4-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-09ARM: dts: Add Raspberry Pi 400 supportStefan Wahren2-0/+46
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there are some minor differences: - higher CPU clock rate (1.8 GHz) - different Wifi chip (BCM43456) - power off is now handled via GPIO - no ACT LED Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-09ARM: dts: bcm283x: Fix up GPIO LED node namesStefan Wahren15-21/+21
Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08Merge tag 'orphans-v5.13-rc6' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull orphan section fixes from Kees Cook: "These two corner case fixes have been in -next for about a week: - Avoid orphan section in ARM cpuidle (Arnd Bergmann) - Avoid orphan section with !SMP (Nathan Chancellor)" * tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: vmlinux.lds.h: Avoid orphan section with !SMP ARM: cpuidle: Avoid orphan section warning
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann1-2/+0
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 nodeRobin van der Gracht1-1/+0
The 'fsl,ssi' documentation doesn't say anything about specifying this. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97Robin van der Gracht1-1/+0
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt 'fsl,mode' should be specified for AC97 mode only. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6qdl-vicut1: add interrupt-counter nodesOleksij Rempel1-1/+40
interrupt-counter is mainline now, so we can add missing counter nodes. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: Enable the VPURobin van der Gracht1-4/+0
Enable Video Processing Unit to make accelerated video decoding work. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boardsOleksij Rempel2-1/+6
Activate low-pass/debounce filter on the touchscreen. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-plym2m: remove touchscreen-size-* propertiesOleksij Rempel1-2/+0
Remove touchscreen-size-* properties. This values are not correct, event if it works with ts_test tool, it fails to work properly with weston. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.Oleksij Rempel1-2/+1
At some point PWM cell count was changed, but it didn't triggered any error, since this DT was overwriting "#pwm-cells". To make sure, we are in sync with the kernel driver, remove this property and fix the pwm consumer. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: Remove backlight enable gpioOleksij Rempel1-9/+0
The backlight power is controlled through the reg_bl_12v0 regulator. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen nodeOleksij Rempel1-0/+15
Add touchscreen support to the Protonic VT7 board. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08ARM: dts: Move BCM2711 RPi specific into separate dtsiStefan Wahren2-71/+84
There is a lot of Raspberry Pi specific stuff (neither SoC or board specific) for the BCM2711 which is currently in the RPi 4 B dts. In order to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it into a separate dtsi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: dts: bcm283x: Fix up MMC node namesStefan Wahren2-2/+2
Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08ARM: boot: dts: bcm2711: Add BCM2711 VEC compatibleMateusz Kwiatkowski1-0/+1
The BCM2711 has a slightly different VEC than the one found in the older SoCs. Now that we support the new variant, add its compatible to the device tree. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"Stefan Wahren2-2/+2
This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-07ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1Nick Desaulniers1-5/+5
There's a few instructions that GAS infers operands but Clang doesn't; from what I can tell the Arm ARM doesn't say these are optional. F5.1.257 TBB, TBH T1 Halfword variant F5.1.238 STREXD T1 variant F5.1.84 LDREXD T1 variant Link: https://github.com/ClangBuiltLinux/linux/issues/1309 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Jian Cai <jiancai@google.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: 9086/1: syscalls: use pattern rules to generate syscall headersMasahiro Yamada1-14/+4
Use pattern rules to unify similar build rules between OABI and EABI. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-07ARM: 9085/1: remove unneeded abi parameter to syscallnr.shMasahiro Yamada2-5/+2
You do not need to pass the abi parameter to syscallnr.sh because it parses all the lines of syscall.tbl except comments anyway. Simplify the code. Also, remove unneeded single-quoting. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 20:45:36 +0300