summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15Merge tag 'qcom-dts-fixes-for-5.13' of ↵Olof Johansson2-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm DTS fixes for v5.13 Failure to properly define "secure-regions" as 64-bit ranges prevents the two SDX55 boards from booting, so correct this. * tag 'qcom-dts-fixes-for-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55-telit: Represent secure-regions as 64-bit elements ARM: dts: qcom: sdx55-t55: Represent secure-regions as 64-bit elements Link: https://lore.kernel.org/r/20210614215552.391887-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'samsung-defconfig-5.14' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig Samsung defconfig changes for v5.14 1. Enable Exynos Universal Flash Storage (UFS) driver for Exynos7 arm64 boards. 2. Restore framebuffer support in exynos_defconfig. * tag 'samsung-defconfig-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: restore framebuffer support arm64: defconfig: Enable Exynos UFS driver Link: https://lore.kernel.org/r/20210614193309.20248-3-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15ARM: dts: ux500: Fix LED probingLinus Walleij1-0/+7
The Ux500 HREF LEDs have not been probing properly for a while as this was introduce: ret = of_property_read_u32(np, "color", &led_color); if (ret) return ret; Since the device tree did not define the new invented color attribute, probe was failing. Define color attributes for the LEDs so they work again. Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@linaro.org Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: stable@vger.kernel.org Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'imx-defconfig-5.14' of ↵Olof Johansson1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.14: - Enable LT8912B DRM bridge and Layerscape EDAC driver support in arm64 defconfig. - Enable WiFi ath10k SDIO driver in imx_v6_v7_defconfig. * tag 'imx-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver arm64: defconfig: enable Layerscape EDAC driver arm64: defconfig: Enable LT8912B DRM bridge driver Link: https://lore.kernel.org/r/20210613082544.16067-6-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'imx-dt-5.14' of ↵Olof Johansson28-69/+2173
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.14: - New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA board, GE B1x5v2 boards. - A series from Christoph Niedermaier to correct imx6q-dhcom descriptions, add device aliases and ethernet VIO regulator. - Correct Ethernet node name for imx51-digi-connectcore-som and imx53-ard board to comply DT schema. - A couple of update on imx6dl-yapp4 board, configuring OLED display segment offset, and using aliases to set custom MMC device indexes. - A series from Oleksij Rempel and Robin van der Gracht to update Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1. - A series from Shengjiu Wang to improve various audio support on NXP reference boards. - Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency. * tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits) ARM: dts: imx6: Add GE B1x5v2 ARM: dts: imx6q-dhcom: Add ethernet VIO regulator ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems ARM: dts: imx6q-dhcom: Fix ethernet reset time properties ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97 ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes ARM: dts: imx6dl-prtvt7: Enable the VPU ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node. ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node ARM: dts: imx53-ard: Correct Ethernet node name ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect ... Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'imx-soc-5.14' of ↵Olof Johansson11-149/+145
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.14: - Add SMP support for i.MX7D, as there are i.MX7D devices running in field with U-Boot that doesn't support PSCI. - Fix imx5_cpu_suspend_info reference in i.MX5 PM code comments. - Add SoC ID initialization for i.MX50. - Drop unnecessary of_platform_default_populate() call from i.MX6Q .init_machine hook. - A series from Oleksij Rempel to remove most of the i.MX6/7 board specific PHY fixups. * tag 'imx-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine ARM: imx7d: remove Atheros AR8031 PHY fixup ARM: imx6sx: remove Atheros AR8031 PHY fixup ARM: imx6q: remove Atheros AR8035 SmartEEE fixup ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs ARM: imx6q: remove BMCR_PDOWN handler in ar8035_phy_fixup() ARM: imx6q: remove part of ar8031_phy_fixup() ARM: imx6q: remove PHY fixup for KSZ9031 ARM: imx: Initialize SoC ID on i.MX50 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Link: https://lore.kernel.org/r/20210613082544.16067-2-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'keystone_dts_for_5.13' of ↵Olof Johansson2-11/+6
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: DTS: Keystone K2G cleanup for v5.13 - Rename message manager node - Rename the TI-SCI node and clock - assign clock to McAsp * tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name ARM: dts: keystone: k2g: Rename the TI-SCI node ARM: dts: keystone: k2g: Rename message-manager node Link: https://lore.kernel.org/r/1623564020-9958-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-14ARM: dts: meson: Set the fifo-size of uart_A to 128 bytesMartin Blumenstingl1-0/+1
The first UART controller in the "Everything-Else" power domain is called uart_A. Unlike all other UARTs (which use a 64 byte fifo-size in hardware) uart_A has a fifo-size of 128 bytes. This UART controller is typically used for Bluetooth HCI. The fifo-size of 128 bytes is valid from all SoCs from Meson6 (or possibly even earlier) all the way up to the latest 64-bit ones. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210604170844.2201229-1-martin.blumenstingl@googlemail.com
2021-06-14Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman11-25/+35
We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14Merge tag 'v5.13-rc6' into tty-nextGreg Kroah-Hartman11-25/+35
We want the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-13ARM: 9096/1: Remove arm_pm_restart()Guenter Roeck2-6/+1
All users of arm_pm_restart() have been converted to use the kernel restart handler. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9094/1: Register with kernel restart handlerGuenter Roeck1-2/+18
By making use of the kernel restart handler, board specific restart handlers can be prioritized amongst available mechanisms for a particular board or system. Select the default priority of 128 to indicate that the restart callback in the machine description is the default restart mechanism. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9092/1: xen: Register with kernel restart handlerGuenter Roeck1-2/+10
Register with kernel restart handler instead of setting arm_pm_restart directly. Select a high priority of 192 to ensure that default restart handlers are replaced if Xen is running. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults"Wang Kefeng2-28/+0
This reverts commit e220ba60223a9d63e70217e5b112160df8c21cea. The VERIFY_PERMISSION_FAULT is introduced since 2009 but no one use it, just revert it and clean unused comment. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9090/1: Map the lowmem and kernel separatelyLinus Walleij1-33/+111
Using our knowledge of where the physical kernel sections start and end we can split mapping of lowmem and kernel apart. This is helpful when you want to place the kernel independently from lowmem and not be limited to putting it into lowmem only, but also into places such as the VMALLOC area. We extensively rewrite the lowmem mapping code to account for all cases where the kernel image overlaps with the lowmem in different ways. This is helpful to handle situations which occur when the kernel is loaded in different places and makes it possible to place the kernel in a more random manner which is done with e.g. KASLR. We sprinkle some comments with illustrations and pr_debug() over it so it is also very evident to readers what is happening. We now use the kernel_sec_start and kernel_sec_end instead of relying on __pa() (phys_to_virt) to provide this. This is helpful if we want to resolve physical-to-virtual and virtual-to-physical mappings at runtime rather than compiletime, especially if we are not using patch phys to virt. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9089/1: Define kernel physical section start and endLinus Walleij2-3/+31
When we are mapping the initial sections in head.S we know very well where the start and end of the kernel image in physical memory is placed. Later on it gets hard to determine this. Save the information into two variables named kernel_sec_start and kernel_sec_end for convenience for later work involving the physical start and end of the kernel. These variables are section-aligned corresponding to the early section mappings set up in head.S. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSETLinus Walleij3-4/+9
We want to be able to compile the kernel into an address different from PAGE_OFFSET (start of lowmem) + TEXT_OFFSET, so start to pry apart the address of where the kernel is located from the address where the lowmem is located by defining and using KERNEL_OFFSET in a few key places. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13ARM: dts: rockchip: add power controller for RK322xAlex Bee1-0/+111
Add the power controller node and the correspondending qos nodes for RK322x. Also add the power-domain property to the nodes that are already present. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20210527154455.358869-10-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13ARM: dts: rockchip: add power controller for RK3036Alex Bee1-0/+50
Add the power controller node and the correspondending qos nodes for RK3036. Also add the power-domain property to the nodes that are already present. Note: Since the regiser offsets of the axi interconnect QoS are missing in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20210527154455.358869-9-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13ARM: dts: rockchip: add labels to the timer nodes on rk3066aJohan Jonker1-3/+3
While the kernel doesn't care so much right now, boot loaders like u-boot need to refine the node on their side, so to make life easier for everyone add the labels to the timer nodes on rk3066a. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210612184733.2331-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-12ARM: dts: gemini: add crypto nodeCorentin Labbe1-0/+8
The SL3516 SoC has a crypto offloader IP. This patch adds it on the gemini SoC Device-tree. Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.org Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'sunxi-dt-for-5.14-1' of ↵Olof Johansson8-6/+460
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to improve the Allwinner SoCs support, mainly: - I2S Support for the V3 - Audio Codec Support for the V3s - DMA support for the V3s - PWM support for the V3s - Support for Bluetooth Audio on the pinephone - Add A10-like timers to the A64 and R40 - New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5 * tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits) ARM: dts: sun8i: v3s: enable emac for zero Dock arm64: dts: allwinner: pinephone: Set audio card name ARM: dts: sun8i: r40: Add timer node ARM: dts: sun8i: V3: add I2S interface to V3 dts dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible ARM: dts: sun8i: V3: add codec analog frontend to V3 dts ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA ARM: dts: sun8i: v3s: add DMA controller to v3s dts ARM: dts: sun8i: v3s: add pwm controller to v3s dts dt-bindings: pwm: allwinner: add v3s pwm compatible arm64: dts: allwinner: h5: Add NanoPi R1S H5 support dt-bindings: arm: Add NanoPi R1S H5 arm64: dts: allwinner: pinephone: Add support for Bluetooth audio arm64: dts: allwinner: a64: Allow multiple DAI links arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3 arm64: dts: allwinner: a64: Allow using multiple codec DAIs ARM: dts: sun8i-a33: Allow using multiple codec DAIs ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells ... Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'sunxi-fixes-for-5.13-1' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two patches to fix the GMAC PHY mode on some boards. * tag 'sunxi-fixes-for-5.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode Link: https://lore.kernel.org/r/ad7ba352-315c-4201-b922-4bf914a00d98.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'at91-defconfig-5.14' of ↵Olof Johansson1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.14: - Add the use of tickless and HR times to ARM9 defconfig * tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91_dt_defconfig: configs for sam9x60 Link: https://lore.kernel.org/r/20210611125659.25590-1-nicolas.ferre@microchip.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'at91-dt-5.14' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 dt for 5.14: - A fix for sama5d4 gpio mux - A trivial fix for DT documentation * tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: i2c: at91: fix example for scl-gpios ARM: dts: at91: sama5d4: fix pinctrl muxing Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'renesas-arm-dt-for-v5.14-tag2' of ↵Olof Johansson4-2/+34
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 (take two) - External interrupt (INTC-EX) support for the R-Car M3-W+ SoC, - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r9a07g044: Add SYSC node arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's dt-bindings: clock: Add r9a07g044 CPG Clock Definitions arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node arm64: dts: renesas: r8a77961: Add INTC-EX device node ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages arm64: dts: renesas: Add missing opp-suspend properties Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'ux500-dts-v5.14' of ↵Olof Johansson10-38/+47
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v5.14: - Fix interrupt cells, GPIO controller node names in accordance with new YAML schemas. - Add proper compatible strings for Broadcomm Wifi and BT. - Fix upp and add some mount matrices for accelerometers so e.g. UI:s work as they should. - Drop the DRDY pin assignment for a non-existing pin on a magnetometer. * tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Fix orientation of Janice accelerometer ARM: dts: href: Mount matrices for TVK R2 ARM: dts: ux500: Fix some compatible strings ARM: dts: ux500: Drop drdy pin assignment from magnetometer ARM: dts: ux500: Fix orientation of accelerometer ARM: dts: ux500: Rename gpio-controller node ARM: dts: ux500: Fix interrupt cells Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'arm-soc/for-5.14/devicetree' of ↵Olof Johansson46-149/+209
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.14, please pull the following: - Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS files to resolve a number of DT binding check warnings pertaining to NAND, pinmux, clocks, SPI - Stefan provides a fix for an increase in the DWC2 controller's RX FIFO causing regressions on the Raspberry Pi 4B - Mateusz adds a BCM2711 specific VEC compatible string to allow keying off that variant properly - Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI re-organization work and finally adding the DTS file proper * tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 400 ARM: dts: Add Raspberry Pi 400 support ARM: dts: bcm283x: Fix up GPIO LED node names dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema ARM: dts: Move BCM2711 RPi specific into separate dtsi ARM: dts: bcm283x: Fix up MMC node names ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" ARM: dts: BCM5301X: Fixup SPI binding dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema ARM: dts: BCM5301X: Fix pinmux subnodes names ARM: dts: Hurricane 2: Fix NAND nodes names ARM: dts: BCM63xx: Fix NAND nodes names ARM: NSP: dts: fix NAND nodes names ARM: Cygnus: dts: fix NAND nodes names ARM: brcmstb: dts: fix NAND nodes names ARM: dts: BCM5301X: Fix NAND nodes names Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'stm32-dt-for-v5.14-1' of ↵Olof Johansson22-161/+147
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.14, round 1 Highlights: ----------- MCU part: - Fixes for Yaml verifications MPU part: - Configure qspi's mdma transfer to block for stm32mp151 - ST boards: - Fixes for yaml verifications - DH boards: - Fixes for yaml verifications - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence. - Odyssey boards: - fix Sd card detectection (gpio line updated) - fix eMMC VQMMC suuply (use vdd instead of v3v3) * tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: fix stpmic node for stm32mp1 boards ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply ARM: dts: stm32: add a new DCMI pins group on stm32mp15 ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 dt-bindings: net: document ptp_ref clk in dwmac ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings ARM: dts: stm32: fix RCC node name on stm32f429 MCU ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'samsung-soc-5.14' of ↵Olof Johansson2-1/+2
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.14 1. Fix: add missing of_node_put. 2. Extend Samsung maintainers entry to cover Samsung PWM driver files, because they do not have a dedicated entry. 3. Minor cleanups. * tag 'samsung-soc-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: MAINTAINERS: Include Samsung PWM in Samsung SoC entry soc: samsung: pmu: drop EXYNOS_CENTRAL_SEQ_OPTION defines ARM: exynos: add missing of_node_put for loop iteration ARM: s3c: Remove unnecessary break in RX1950 Link: https://lore.kernel.org/r/20210610074055.12474-2-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'samsung-dt-5.14' of ↵Olof Johansson19-21/+24
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.14 1. Several cleanups and alignment with dtschema. This includes removal of unused properties and fixing LED brightness property. 2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for example from Suspend to RAM where the PMIC RTC's power is still supplied). 3. Disable unused/not implemented camera on GT-I9100. * tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Disable unused camera input for I9100 ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420 ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3 ARM: dts: exynos: enable PMIC wakeup from suspend on Midas ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412 ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4 ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3 ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100 ARM: dts: exynos: align Broadcom WiFi with dtschema Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: config: aspeed: Add DEBUG_FS and EXT4Joel Stanley2-0/+3
DEBUG_FS was lost way back in v5.5, and EXT4 is used by ast2600 systems that have MMC. Link: https://lore.kernel.org/r/20210610045338.99847-1-joel@jms.id.au Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210603040906.125109-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'aspeed-5.14-devicetree' of ↵Olof Johansson37-189/+2052
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.14 - IBM Rainier and Everest LED descriptions. These systems have a large number of LEDs attached via expanders. - Ampere Mt Jade updates, as OpenBMC bringup continues for this machine. - Updated 64MB flash layout for systems using OpenBMC on NOR root file systems. - Support for HS200 MMC on AST2600 EVB. This is only supported from A2, so a new device tree is added to support A0 and A1. - Update all command lines for early serial output. * tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: Add pcie cable card indicator leds ARM: dts: aspeed: everest: Add vrm and other indicator leds ARM: dts: aspeed: everest: Add dimm indicator leds ARM: dts: aspeed: everest: Add pcie slot indicator leds ARM: dts: aspeed: everest: Add nvme and fan indicator leds ARM: dts: aspeed: everest: Add system level indicator leds ARM: dts: aspeed-g5: Add SCU phandle to GFX node ARM: dts: aspeed: Everest: Add directly controlled LEDs ARM: dts: aspeed: Rainier 4U: Remove fan updates ARM: dts: aspeed: Everest: Fix cable card PCA chips ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout ARM: dts: aspeed: mtjade: switch to 64MB flash layout ARM: dts: aspeed: mtjade: Add PSU support ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI ARM: dts: aspeed: Set earlycon boot argument ARM: dts: aspeed-g6: Add pinctrl settings ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0 ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller. ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb. Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: dts: ixp4xx: Add crypto engineLinus Walleij1-0/+8
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'omap-for-v5.14/dt-signed' of ↵Olof Johansson33-181/+139
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'omap-for-v5.14/defconfig-signed' of ↵Olof Johansson1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig Defconfig changes for omaps for v5.14 merge window Defconfig changes for omap2plus_defconfig to add WL1251 and LP5523 as loadable modules for n900. * tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Add LP5523 LED driver ARM: omap2plus_defconfig: Add WL1251 and WEXT modules Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-2 Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'omap-for-v5.14/cleanup-signed' of ↵Olof Johansson5-26/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc Clean up changes for omaps for v5.14 merge window With the recent changes to drop legacy platform data for am3/4, omap4/5, and dra7, we can drop the related unused code. There is also a patch to remove leading spaces from the Kconfig file. * tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: remove omap2_set_globals_control() ARM: OMAP2+: CM: remove omap2_set_globals_cm() ARM: OMAP1: Remove leading spaces in Kconfig MAINTAINERS: remove obsolete OMAP HWMOD DATA FOR OMAP4-BASED DEVICES Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'renesas-arm-dt-for-v5.14-tag1' of ↵Olof Johansson15-13/+89
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'renesas-arm-defconfig-for-v5.14-tag1' of ↵Olof Johansson1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.14 - Refresh shmobile_defconfig for v5.13-rc1 - Enable R-Car USB2 clock selector support * tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2 ARM: shmobile: defconfig: Refresh for v5.13-rc1 Link: https://lore.kernel.org/r/cover.1622188834.git.geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'gemini-dts-v5.14-1' of ↵Olof Johansson9-33/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12Merge tag 'ixp4xx-dts-v5.14-1' of ↵Olof Johansson6-28/+280
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: dts: add intel-ixp42x-welltech-epbx100Corentin Labbe2-0/+77
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: ixp4xx_defconfig: add MTD_PHYSMAPCorentin Labbe1-0/+2
Without MTD_PHYSMAP/MTD_PHYSMAP_OF the flash partitions of my welltech,epbx100 are not detected. Link: https://lore.kernel.org/r/20210504193457.4008384-3-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORMCorentin Labbe1-0/+1
My ixp42x-welltech-epbx100 does not print anything on console without CONFIG_SERIAL_OF_PLATFORM. Link: https://lore.kernel.org/r/20210504193457.4008384-2-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driverFabio Estevam1-0/+2
Select the ath10k sdio driver so that Wifi can work by default on boards like imx6dl-pico-pi with a QCA9377 chip. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6: Add GE B1x5v2Sebastian Reichel9-0/+1244
This adds device tree files for the General Electric Healthcare (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 system on module, which is described in its own device tree include, so that it can also be used by other boards. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add ethernet VIO regulatorChristoph Niedermaier1-0/+18
Add VIO regulator that supplies multiple ethernet magnetics and currently there is no upstream support for that in the networking, so just keep the regulator enabled always to emulate what other boards, which have this hard-wired, do. Until there is support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtcChristoph Niedermaier1-1/+11
Add aliases for i2c and serial to match the order of the DHCOM standard [1]. Also add aliases for the two rtcs. The i2c rtc is the primary one. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recoveryChristoph Niedermaier1-3/+33
The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-12ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problemsChristoph Niedermaier1-0/+1
To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 02:28:58 +0300