summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 mpussTony Lindgren6-48/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 ocmcramTony Lindgren4-40/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 emifTony Lindgren3-43/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 wkup_m3Tony Lindgren3-48/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am4 wkup_m3Tony Lindgren2-18/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure RTC powerdomain for am4Tony Lindgren1-0/+1
For genpd we need the RTC powerdomain configured. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 control moduleTony Lindgren3-29/+3
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. To drop the legacy platform data for am3 control module, we need to configure the missing functional clock and tag the module to not idle as platform data also had it configured with HWMOD_INIT_NO_IDLE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure also interconnect clocks for am4 system timerTony Lindgren1-0/+6
We now manage clocksource and clockevent clocks directly with timer-ti-dm-systimer. In order to use genpd with prm_omap, GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system timer related interconnect clocks enabled until clocksource suspend is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am43xx: add remaining PRM instancesTero Kristo1-0/+26
Add remaining PRM instances for the am43xx SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Build hwmod related code as neededTony Lindgren3-12/+22
If we have only am3 selected, there's no need to build the hwmod related code as we are probing devices with device tree data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy remaining legacy platform data for am3Tony Lindgren3-164/+0
We can now drop the remaining legacy platform data as we are probing devices with device tree data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l3Tony Lindgren1-2/+4
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_perTony Lindgren1-5/+8
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_fastTony Lindgren1-2/+5
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 mpussTony Lindgren4-9/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 instrTony Lindgren3-8/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 ocmcramTony Lindgren3-15/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 emifTony Lindgren2-31/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 debugssTony Lindgren2-42/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpmcTony Lindgren8-78/+65
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 wkup_m3Tony Lindgren2-44/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am3 wkup_m3Tony Lindgren2-17/+14
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure RTC powerdomain for am3Tony Lindgren1-0/+1
For genpd we need the RTC powerdomain configured. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 control moduleTony Lindgren2-24/+3
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. To drop the legacy platform data for am3 control module, we need to configure the missing functional clock and tag the module to not idle as platform data also had it configured with HWMOD_INIT_NO_IDLE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure also interconnect clocks for am4 system timerTony Lindgren1-0/+6
We now manage clocksource and clockevent clocks directly with timer-ti-dm-systimer. In order to use genpd with prm_omap, GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system timer related interconnect clocks enabled until clocksource suspend is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am33xx: add remaining PRM instancesTero Kristo1-0/+20
Add remaining PRM instances for the am33xx SoC. Additionally, enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> [tony@atomide.com: fixed a typo for #power-domain-cells] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-busTony Lindgren1-0/+11
In preparation for probing the interconnects with simple-pm-bus to make use of genpd, we need to probe the always-on PRCM first for the clocks needed by l4_wkup instance. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Check for inited flagTony Lindgren1-0/+6
If we have no hwmods configured and omap_hwmod_init() is not called, we don't want to call omap_hwmod_setup_all() as it will fail with checks for configured MPU at least. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16Merge tag 'ti-sysc-fixes' into fixesTony Lindgren1-1/+2
2020-11-16ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=mCarl Philipp Klemm1-0/+2
ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to support motorola xt894's magnetometer and motorola xt875's accelerometer respectivly Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz> [tony@atomide.com: shortened subject a bit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: omap2plus_defconfig: Enable OMAP3_THERMALAdam Ford1-0/+1
With the additional power management options enabled, this patch enables OMAP3_THERMAL by default. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreenJonathan Neuschäfer1-1/+16
The Kobo Aura has an eKTF2132 touchscreen controller. Although the vendor kernel toggles a reset pin (GPIO5-12) during the startup sequence, the touchscreen works without it. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16ARM: dts: imx: Change flexcan node name to "can"Marc Kleine-Budde3-6/+6
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with yaml schema, it requires the nodename to be "can". This fixes the following error found by dtbs_check: arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$' From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16ARM: dts: imx6q-pico: fix board compatiblesKrzysztof Kozlowski4-4/+4
There are four flavors of TechNexion PICO-IMX6 boards. They have their own DTSes, even though in Dwarf, Nymph and Pi are exactly the same. They also have their own bindings so adjust the compatibles to match the bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16arm: dts: aspeed: tiogapass: Enable second MACPaul Fertser1-0/+8
Tioga Pass reference design includes Intel I210 Ethernet controller connected to the BMC with NC/SI. MAC readout is not supported. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Vijay Khemka <vijaykhemkalinux@gmail.com> Tested-by: Vijay Khemka <vijaykhemkalinux@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: aspeed: minipack: Fixup I2C treeTao Ren1-0/+888
Create all the i2c switches in device tree and use aliases to assign child channels with consistent bus numbers. Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to avoid potential conflicts when multiple devices (beind the switches) use the same device address. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201110072446.8218-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: aspeed: wedge400: Fix FMC flash0 layoutTao Ren1-2/+2
Update "data0" partition's size from 8MB to 4MB to fix "partition data0 extends beyond the end of device" warning at bootup time. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201110072159.7941-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.Jonathan Cameron1-1/+0
This property applies to consumers of io-channels. In this case we have a provider so the property is not used. Recent changes to dt-schema result int his being reported as an error as a dependency is enforced between this property and io-channels. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-15Merge tag 'perf-urgent-2020-11-15' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes for perf: - A set of commits which reduce the stack usage of various perf event handling functions which allocated large data structs on stack causing stack overflows in the worst case - Use the proper mechanism for detecting soft interrupts in the recursion protection - Make the resursion protection simpler and more robust - Simplify the scheduling of event groups to make the code more robust and prepare for fixing the issues vs. scheduling of exclusive event groups - Prevent event multiplexing and rotation for exclusive event groups - Correct the perf event attribute exclusive semantics to take pinned events, e.g. the PMU watchdog, into account - Make the anythread filtering conditional for Intel's generic PMU counters as it is not longer guaranteed to be supported on newer CPUs. Check the corresponding CPUID leaf to make sure - Fixup a duplicate initialization in an array which was probably caused by the usual 'copy & paste - forgot to edit' mishap" * tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix Add BW copypasta perf/x86/intel: Make anythread filter support conditional perf: Tweak perf_event_attr::exclusive semantics perf: Fix event multiplexing for exclusive groups perf: Simplify group_sched_in() perf: Simplify group_sched_out() perf/x86: Make dummy_iregs static perf/arch: Remove perf_sample_data::regs_user_copy perf: Optimize get_recursion_context() perf: Fix get_recursion_context() perf/x86: Reduce stack usage for x86_pmu::drain_pebs() perf: Reduce stack usage of perf_output_begin()
2020-11-15ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3Łukasz Stelmach1-0/+4
Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-3-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-15ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3Łukasz Stelmach1-2/+2
Assign appropriate compatible properties matching real USB vendor and product ID. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-2-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-14ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150Rafał Miłecki1-0/+4
This device has a functional USB 3 port so PHY is required. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-14ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3Rafał Miłecki6-24/+0
It seems pointless to have it enabled. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-13Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-20/+20
Pull ARM fix from Russell King: "Just one bug fix: avoid a fortify panic when copying optprobe template" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of ↵Arnd Bergmann11-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'stm32-dt-for-v5.10-fixes-2' of ↵Arnd Bergmann3-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"Krzysztof Kozlowski1-1/+0
This reverts commit eaf2d2f6895d676dda6c95a652b58594f2887720. The commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'imx-fixes-5.10-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 23:47:00 +0300