summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09ARM: omap1: osk: Constify the software nodeHeikki Krogerus1-1/+5
Additional device properties are always just a part of a software fwnode. If the device properties are constant, the software node can also be constant. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-09ARM: davinci: Constify the software nodesHeikki Krogerus6-6/+30
Additional device properties are always just a part of a software fwnode. If the device properties are constant, the software node can also be constant. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-08ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMICCristian Ciocaltea1-6/+126
Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V' dummy regulator used for the uSD supply. Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'mvebu-dt-5.13-1' of ↵Arnd Bergmann2-0/+236
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.13 (part 1) Add support for ATL-x530 Board (Armada 38x based) * tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for ATL-x530 Board Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'omap-for-v5.13/defconfig-signed' of ↵Arnd Bergmann1-1/+150
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig Defconfig changes for omaps for v5.13 Update defconfig to have nefilter available as loadable modules to make the defconfig more usable for networked devices. And we now select SIMPLE_PM_BUS so it can be dropped. And some devices use EEPROM_AT25 so let's add it as a loadable module. * tag 'omap-for-v5.13/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Add AT25 EEPROM module ARM: omap2plus_defconfig: Enable Netfilter components as modules ARM: omap2plus_defconfig: Update for dropped simple-pm-bus Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'samsung-soc-5.13' of ↵Arnd Bergmann2-20/+19
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.13 1. Update Krzysztof Kozlowski's email address in Maintainers. 2. Replace deprecated pwm_request() with pwm_get() in S3C24xx. 3. Correct kerneldoc. * tag 'samsung-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos: correct kernel doc in platsmp ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950 MAINTAINERS: use Krzysztof Kozlowski's Canonical address Link: https://lore.kernel.org/r/20210407065828.7213-3-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'omap-for-v5.13/soc-signed' of ↵Arnd Bergmann6-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omaps for v5.13 Minor non-urgent fixes for issues found by robots and few typo fixes: - Use DEFINE_DEBUGFS_ATTRIBUTE - Add missing of_node_put() - Use true and false for bool variable - Use DEFINE_SPINLOCK - Fix incorrect kerneldoc usage * tag 'omap-for-v5.13/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock ARM: OMAP2+: use true and false for bool variable ARM: OMAP2+: add missing call to of_node_put() ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'hisi-armv7soc-for-5.13' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann4-5/+5
into arm/soc HiSilicon ARMv7 SoC updates for v5.13 - Correct the HiSilicon copyright * tag 'hisi-armv7soc-for-5.13' of git://github.com/hisilicon/linux-hisi: ARM: hisi: use the correct HiSilicon copyright Link: https://lore.kernel.org/r/eba8b55e-0969-8ca2-eca3-7c471cb0ff6f@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'omap-for-v5.12/fixes-rc6-signed' of ↵Arnd Bergmann9-12/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.12-rc cycle Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Also included are two compiler warning fixes. * tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren2-2/+22
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08ARM/spi: spear: Drop PL022 num_chipselectLinus Walleij2-12/+0
A previous refactoring moved the chip select number handling to the SPI core and we missed a leftover platform data user in the ST spear platform. The spear is not using this chipselect or PL022 for anything and should be using device tree like the rest of the platform so just delete the offending platform data. Cc: Viresh Kumar <vireshk@kernel.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210408075045.3435046-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-08ARM: dts: Add board-specific compatible string to npcm750-evb devicetreeJonathan Neuschäfer1-1/+1
According to the revised binding, the devicetree needs a board-specific compatible string. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210320164023.614059-2-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: nuvoton: Add Quanta GBS BMC Device TreeGeorge Hung2-0/+1136
Add the device tree for the Quanta GBS BMC based on NPCM730 SoC. Signed-off-by: George Hung <george.hung@quantatw.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: mihawk: Add GPIO line namesNichole Wang1-0/+33
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, not the net or ball name. This makes it easier to share userspace code across different systems and makes the use of the lines more obvious. Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add Rainier 1S4U machineEddie James3-1/+16
The 1S4U version of the Rainier system has only 4 fans. Create a new tree, include the 4U version, and delete the 2 extra fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add size/address cellsJoel Stanley1-0/+4
The gpio and fan nodes reg properties cause dtc to emit a noisy warning about relying on default sizes. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add RTCEddie James1-0/+5
Add the RTC at the appropriate I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: GPIOs supportAlpana Kumari1-0/+297
This commit adds support for- - Presence GPIOs - I2C control GPIOs - Op-panel GPIOs (ex PHR) Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add UCD90320 power sequencerJim Wright1-0/+5
Add UCD90320 chip to Everest device tree. Signed-off-by: Jim Wright <jlwright@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add power supply i2c devicesBrandon Wyman1-0/+20
Add the i2c/pmbus power supply devices to the everest device tree. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add pca9552 fan presenceMatthew Barth1-0/+128
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the 4 GPIO fan presence inputs. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add FSI CFAMs and re-number enginesEddie James1-4/+644
Add additional CFAMs and re-number the existing engines for the extra processors present on the Everest system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add max31785 fan controller deviceMatthew Barth1-4/+40
Add the max31785 configuration at address 0x52 on i2c14 behind mux0 channel 3. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add I2C componentsPriyanga Ramasamy1-0/+408
Tested and able to bound the devices with i2c driver. Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier 4U: Fix fan configurationEddie James1-0/+14
The 4U fans didn't have the correct properties since the fan nodes were redefined. Fix this by referencing each fan individually and adding the differences to the 4U fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add missing fan nodesJoel Stanley1-0/+12
The Maxim fan controller has six fans attached. Two of these were missing from the description. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add presence GPIOsAlpana Kumari1-8/+248
This commit adds presence detect GPIO chips for various FRUs on Rainier. Also, correct the I2C address for the tca9554. Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add additional processor CFAMsEddie James1-2/+281
Rainier has two dual-chip modules and therefore four CFAMs with their associated engines. Add these to the devicetree with the i2c busses that have devices on them. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add gpio-keys-polled for fansBrandon Wyman1-0/+43
Add a gpio-keys-polled section to the Rainier device tree for the fan presence signals on the PCA9552 I2C device on bus 7. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add directly controlled LEDsVishwanatha Subbanna1-2/+26
These LEDs are directly connected to the BMC's GPIO bank. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add ASRock E3C246D4I BMCZev Weiss2-0/+203
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series mini-ITX board that we hope can provide a decent platform for OpenBMC development. This initial device-tree provides the necessary configuration for basic BMC functionality such as host power control, serial console and KVM support, and POST code snooping. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-07ARM: dts: mvebu: Add device tree for ATL-x530 BoardAryan Srivastava2-0/+236
Add device tree file for x530 board. This has an Armada 385 SoC. Has NAND-flash for user storage and SPI for booting. Covers majority of x530 and GS980MX variants. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-07Merge tag 'at91-dt-5.13' of ↵Arnd Bergmann11-12/+21
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 dt for 5.13: - two little fixes (typo, W=1) - a change in gpio button keycode for recent boards * tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: add ETB and ETM unit name ARM: dts: at91: change the key code of the gpio key ARM: dts: at91: Fix a typo Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'samsung-dt-5.13' of ↵Arnd Bergmann12-54/+110
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.13 1. Configure battery charger and front camera on GT-I9100 phone. 2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags to match real type of interrupt coming from the device. 3. Correct DTS with dtschema. This brings back the commit adding input clock to CMU in Exynos4412 Odroid which was reverted some time ago due to unsupported deferred probes (now supported and tested). * tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add front camera support to I9100 ARM: dts: exynos: white-space cleanups ARM: dts: exynos: replace deprecated NTC/Murata compatibles ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family ARM: dts: exynos: correct PMIC interrupt trigger level on Snow ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 ARM: dts: exynos: add charger supply for I9100 Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'omap-for-v5.13/dt-v2-signed' of ↵Arnd Bergmann5-321/+514
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.13 Mostly configures addtional devices for various boards, and updates the gpio line names for beagle boards so userspace can optionally find the right lines: - Use unique gpio line names for am335x-pocketbeagle - Update omap3-echo led configuration and add ath6kl node - Fix indentation for am3 tscadc node - Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing - Use unique gpio line names for am335x-boneblack.dts * tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack.dts: unique gpio-line-names ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing ARM: dts: am33xx-l4: fix tscadc@0 node indentation ARM: dts: omap3-echo: Add ath6kl node ARM: dts: omap3-echo: Update LED configuration ARM: dts: am335x-pocketbeagle: unique gpio-line-names Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add an empty chosen node to top level DTSIAlexander Shiyan1-0/+2
Missing "chosen" node can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: edb7211: Add unit-address to memory nodeAlexander Shiyan1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-4-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Fix serial port namesAlexander Shiyan1-2/+2
Preferred node name for serial ports is "serial". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-3-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add keypad nodeAlexander Shiyan1-0/+7
This adds missing keypad node to basic clps711x DT. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-2-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add SYSCON nodes where it is usedAlexander Shiyan1-0/+4
This patch adds SYSCON descriptors to framebuffer, SPI, DAI and modem control GPIO nodes to further rework these drivers to remove the call to the syscon_regmap_lookup_by_compatible() function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-1-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'sunxi-dt-for-5.13-1' of ↵Arnd Bergmann25-25/+327
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - New secondary interrupt controller binding to support the wake-up - Use the RSB bus instead of I2C for the PMIC on the H6 - HDMI support for the BananaPi M2-Zero - New board: Topwise A721 * tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: h3: beelink-x2: Add power button arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out ARM: dts: sun4i: Add support for Topwise A721 tablet dt-bindings: arm: Add Topwise A721 arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc arm64: dts: allwinner: Use the new r_intc binding ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc ARM: dts: sunxi: h3/h5: Add r_intc node ARM: dts: sunxi: Use the new r_intc binding Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'renesas-arm-dt-for-v5.13-tag2' of ↵Arnd Bergmann1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.13 (take two) - Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC, - LED support for the Falcon development board, - Preparatory display pipeline support for the R-Car V3U SoC, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz arm64: dts: renesas: r8a779a0: Fix PMU interrupt arm64: dts: renesas: r8a779a0: Add VSPD support arm64: dts: renesas: r8a779a0: Add FCPVD support arm64: dts: renesas: falcon-cpu: Add GP LEDs arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: falcon: Move AVB0 to main DTS arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS arm64: dts: renesas: falcon: Move console config to CPU board DTS Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: at91: sama5d2: add ETB and ETM unit nameNicolas Ferre1-2/+2
Add unit address to the ETB and ETM nodes. It also allow us to get rid of the warnings: ../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning (unit_address_vs_reg): /etb: node has a reg or ranges property, but no unit name ../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning (unit_address_vs_reg): /etm: node has a reg or ranges property, but no unit name when we compile with W=1. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402170139.140595-1-nicolas.ferre@microchip.com
2021-04-07ARM: dts: at91: change the key code of the gpio keyLudovic Desroches9-9/+18
Having a button code and not a key code causes issues with libinput. udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug within libinput. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@microchip.com
2021-04-07Merge tag 'mvebu-fixes-5.12-1' of ↵Arnd Bergmann1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.12 (part 1) 2 fixes on on turris-omnia (Armada 38x based:) - Fix storm interrupt - Enable hardware buffer management as it should be Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms * tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin ARM: dts: turris-omnia: fix hardware buffer management Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts" Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-06ARM: exynos: correct kernel doc in platsmpKrzysztof Kozlowski1-15/+13
Correct few kerneldoc issues, including W=1 compile warning: arch/arm/mach-exynos/platsmp.c:89: warning: expecting prototype for exynos_core_power_down(). Prototype was for exynos_cpu_power_down() instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210405181605.52612-1-krzysztof.kozlowski@canonical.com
2021-04-06ARM: dts: qcom: msm8974-klte: Add bluetooth supportAlexey Minnekhanov1-0/+50
Broadcom BCM4354 is used on Samsung Galaxy S5 phone on BLSP2 UART8 bus. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-2-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-06ARM: dts: qcom: msm8974: add blsp2_uart8Alexey Minnekhanov1-0/+9
Add blsp2_uart8 node in order to support bluetooth on the Samsung Galaxy S5 phone. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 12:48:58 +0300