summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-05-17ARM: S5PV210: Add support for VPLLThomas Abraham3-2/+70
This patch adds the following. 1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock. 2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the input clock for VPLL. 3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the output of the MUX_VPLL mux. 4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list of clocks to be registered. 5. Adds boot time print of 'clk_sclk_vpll' clock rate. 6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable on other s5p platforms. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_p66 and add clk_pclk_psys clockThomas Abraham1-36/+30
The clk_p83 clock, which is the PCLK clock for PSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a clock divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK PSYS clock. This patch modifies the following. 1. Removes definitions and usage of 'clk_p66' clock. 2. Adds 'clk_pclk_psys' clock which is of type 'struct clksrc_clk'. 3. Replaces all usage of clk_p66 with clk_pclk_psys clock. 4. Adds clk_pclk_psys into list of clocks to be registered. 5. Removes the sys_clks array since it is no longer required. Also the registration of clocks in sys_clks is also removed. 6. Remove the 'GET_DIV' as it is no longer required. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_p83 and add clk_pclk_dsys clock\Thomas Abraham1-10/+13
The clk_p83 clock, which is the PCLK clock for DSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a clock divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK DSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_p83' clock. 2. Adds 'clk_pclk_dsys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_p83 with clk_pclk_dsys clock. 4. Adds clk_pclk_dsys into list of clocks to be registered. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Fix clk_get_rate issue with the clk_h100 clockThomas Abraham1-6/+16
The clk_h100 clock represents the IMEM clock for the MSYS domain. This clock rate of this clock is always half of the hclk_msys clock. There is an issue when getting the clock rate of the clk_h100 clock (clock get_rate hclk_h100 always returns clock rate that is equal to the hclk_msys clock rate). This patch modifies the following. 1. Moves the definition of the clk_h100 clock into the 'init_clocks' list with the appropriate parent, ctrlbit, enable and ops fields. 2. The name of the clock is changed from 'clk_h100' to 'hclk_imem' to represent more clearly that is represents the IMEM clock in the MSYS domain. 3. The function to get the clock rate of the hclk_imem clock is added. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_p100 and add clk_pclk_msys clockThomas Abraham1-10/+13
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_p100' clock. 2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_p100 with clk_pclk_msys clock. 4. Adds clk_pclk_msys into list of clocks to be registered. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_h133 and add clk_hclk_psys clockThomas Abraham1-26/+26
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h133' clock. 2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_h133 with clk_hclk_psys clock. 4. Adds clk_hclk_psys into list of clocks to be registered. 5. Removes the clock rate calculation of hclk133 and replaces it with code that derives the HCLK PSYS clock rate from the clk_hclk_psys clock. 6. Modify printing of the system clock rates. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_h166 and add clk_hclk_dsys clockThomas Abraham1-18/+37
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h166' clock. 2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock sources for the DSYS HCLK clock. 3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'. 4. Replace all usage of clk_h166 with clk_hclk_dsys clock. 5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to be registered. 6. Removes the clock rate calculation of hclk166 and replaces it with code that derives the HCLK DSYS clock rate from the clk_hclk_dsys clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Remove usage of clk_h200 clock and add clk_hclk_msys clockThomas Abraham1-14/+14
The clk_h200 represents the HCLK for the MSYS domain. This clock is of type 'struct clk' but on V210, it is more suitable to be of type 'struct clksrc_clk' (since it is a divided version of the armclk). The replacement clock is renamed as clk_hclk_msys to indicate that it represents the HCLK for MSYS domain. This patch modifies the following. 1. Removes the usage of the clk_h200 clock. 2. Adds the new clock 'clk_hclk_msys'. 3. Adds clk_hclk_msys to the list of sysclks to be registered. 4. Modifies the hclk_msys clock rate calculation procedure to be based on the new clk_hclk_msys clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Add armclk of clksrc_clk clock typeThomas Abraham1-1/+22
This patch modifies the following. 1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type. 2. Adds arm clock to the list of system clocks 'sysclks' for registering it along with other system clocks. 3. Modifies the armclk clock rate calculation procedure to be based on the new clk_armclk clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Rearrange assignment of clock for fout apll/mpll/epll clocksThomas Abraham1-4/+4
The assignment of clock rates for fout apll/mpll/epll is moved further up in the s5pv210_setup_clocks function because the subsequent patches require the clock rate of fout clocks to be setup. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Register apll/mpll/epll clksrc_clk clocksThomas Abraham1-6/+4
This patch modifies the following. 1. Registers the mout_apll clksrc_clk clock. 2. The mout_mpll and mout_epll clocks were registered as 'struct clk' types and then their parents were setup using the s3c_set_clksrc function. This patch reduces the two steps into one by registering the mout_mpll and mout_epll clocks using the s3c_register_clksrc function. 3. As per point 2 above, the init_parents array is no longer required. So the mout clocks are now put together in a new array named 'sysclks'. The sysclks array will list the system level clocks and more clocks will be added to it in the subsequent patches. 4. The clks array is left empty because of the movement of mpll and epll clocks into the sysclks array. It is not deleted since subsequent patches will add clocks into this array. Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com> Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17ARM: S5PV210: Rearrange the system clock definitionsThomas Abraham1-27/+27
The system clock definitions are currently defined below the peripheral clock definitions in the V210 clock code. For the V210 clock updates that follow this patch, it is required that the system clock definitions such as the mout_apll and mout_mpll be defined prior to the device clock definitions. This patch re-arranges the system clock defintions for the clock updates that follow this patch. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-30musb: fix power field to hold all possible valuesAjay Kumar Gupta1-1/+1
MUSB can supply upto 500mA such as, AM3517 and OMAP3EVM Rev >=E and thus the 'power' field has to hold values above 255. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds22-112/+189
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
2010-04-29ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIBColin Tuckley2-1/+2
The switch to using GPIOLIB broke the sd/mmc card detection on the RealView development boards if GPIO_PL061 was not selected. This patch selects GPIO_PL061 if GPIOLIB is selected. The sense of the return value from mmc_status has also changed and is corrected. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds34-124/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
2010-04-24omap: delete unused bootloader tag variablesAaro Koskinen1-3/+0
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unused pinsThomas Weber1-20/+0
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Change position of init callsThomas Weber1-4/+4
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unnecessary include fileThomas Weber1-1/+0
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in pin nameThomas Weber1-2/+2
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Add missing package selectionThomas Weber1-2/+4
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in suppliesThomas Weber1-1/+1
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim1-1/+0
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber1-4/+4
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap4: Fix McBSP4 base addressSantosh Shilimkar1-1/+1
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula1-2/+0
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula1-1/+0
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: fix a gpmc nand problemstanley.miao1-0/+3
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24AM3517: initialize i2c subsystem after mux subsystemstanley.miao1-2/+2
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao1-2/+0
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao1-0/+7
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4: Clocks: Change SPI Instance NamesAbraham Arce1-4/+4
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber1-2/+2
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4: Fix for CONTROL register BaseSantosh Shilimkar1-1/+1
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala1-1/+1
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra1-4/+4
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren1-9/+9
Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap2: Fix ARM processor check for 24xxTony Lindgren1-1/+1
The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap4: Fix build break when used with gcc-4.4.1 (2009-q3)Richard Woodruff2-4/+4
This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: DMA: Init CDAC to zeromanjugk manjugk1-0/+9
The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reported-by:S, Venkatraman <svenkatr@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTHJanusz Krzysztofik1-3/+3
Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23arm: omap1: remove dead code from timer32k.cFelipe Balbi1-15/+0
Trivial patch, no functional changes Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix clocksource_32k to start from zeroAaro Koskinen1-5/+14
When the 32k sync timer is used for sched_clock(), it should count time from the kernel boot (clocksource init) instead of the last HW reset. Otherwise printk.time values will jump suddenly during the boot: [ 0.000000] calling omap2_clk_arch_init+0x0/0x138 @ 1 [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned -22 after 0 usecs [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned with error code -22 [ 0.000000] calling omap_init_clocksource_32k+0x0/0x98 @ 1 [ 508.697937] initcall omap_init_clocksource_32k+0x0/0x98 returned 0 after 0 usecs [ 508.697967] calling omap_init_devices+0x0/0x38 @ 1 [ 508.698425] initcall omap_init_devices+0x0/0x38 returned 0 after 0 usecs This will confuse tools such as scripts/bootgraph.pl. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22ARM: 6023/1: update bcmring_defconfig to latest version and fix build errorLeo Chen1-25/+101
update bcmring_defconfig to the latest kernel version, this will fix the KAutobuild error. Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22Merge branch 'for_2.6.34rc_a' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren17-39/+113
omap-fixes-for-linus
2010-04-21ARM: fix build error in arch/arm/kernel/process.cRussell King19-86/+86
/tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.Ernst Schwab1-2/+2
Cosmetic change to mach-at91 Makefile: remove two blanks introduced by earlier patches. Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6052/1: kdump: make kexec work in interrupt contextMika Westerberg1-4/+6
When crash happens in interrupt context there is no userspace context. We always use current->active_mm in those cases. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6051/1: VFP: preserve the HW context when calling signal handlersImre Deak3-17/+111
From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-28 13:00:36 +0300