Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
Ths PMIC's interrupt line is tied to GPIO0_A3. This is described
correctly for the pinmux setting, but incorrectly for the interrupt.
Correct the interrupt setting so that interrupts from the PMIC get
delivered.
Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20221106161513.4140-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
PCIe4.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-10-johan+linaro@kernel.org
|
|
Enable the modem connected to the PCIe3a M.2 connector.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-9-johan+linaro@kernel.org
|
|
Enable the NVMe SSD connected to PCIe2.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-8-johan+linaro@kernel.org
|
|
Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
PCIe4.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-7-johan+linaro@kernel.org
|
|
Enable the SDX55 modem connected to PCIe3.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-6-johan+linaro@kernel.org
|
|
Enable the NVMe SSD connected to PCIe2.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-5-johan+linaro@kernel.org
|
|
Rename the backlight and misc regulators according to the net names.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-4-johan+linaro@kernel.org
|
|
The SA8295P-ADP has up to four PCIe interfaces implemented by three or
four controllers: PCIe2A, PCIe3A/PCIe3B and PCIe4.
PCIe2 is used in x4 mode, while PCIe3 can be used in either x2 or x4
mode. Enable both PCIe3A and PCI3B in x2 mode for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-3-johan+linaro@kernel.org
|
|
The SC8280XP platform has seven PCIe controllers:
PCIe0 USB4
PCIe1 USB4
PCIe2A 4-lane
PCIe2B 2-lane
PCIe3A 4-lane
PCIe3B 2-lane
PCIe4 1-lane
while SA8540P only has five (PCIe2-4).
Add devicetree nodes for the PCIe2-4 controllers and their PHYs.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-2-johan+linaro@kernel.org
|
|
The Qualcomm Snapdragon 670 has been out for a while. Add a device tree
for it and the Google Pixel 3a as the first device.
The Pixel 3a has the same bootloader issue as the Pixel 3 and will not work
on Android 10 bootloaders or later until it gets fixed for the Pixel 3.
SoC Initial Features:
- power management
- clocks
- pinctrl
- eMMC
- USB 2.0
- GENI I2C
- IOMMU
- RPMh
- interrupts
Device-Specific Initial Features:
- side buttons (keys)
- regulators
- touchscreen
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111001818.124901-5-mailingradian@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Another fix for rodata=full. Since rodata= is not a simple boolean on
arm64 (accepting 'full' as well), it got inadvertently broken by
changes in the core code. If rodata=on is the default and rodata=off
is passed on the kernel command line, rodata_full is never disabled
- Fix gcc compiler warning of shifting 0xc0 into bits 31:24 without an
explicit conversion to u32 (triggered by the AMPERE1 MIDR definition)
- Include asm/ptrace.h in asm/syscall_wrapper.h to fix an incomplete
struct pt_regs type causing the BPF verifier to refuse to load a
tracing program which accesses pt_regs
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Include asm/ptrace.h in syscall_wrapper header.
arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro
arm64: fix rodata=full again
|
|
The Google Herobrine WIFI SKU can save 256M by not having modem/mba/rmtfs
memory regions defined. Add the dts fragment and mark all the board files
appropriately.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-2-quic_sibis@quicinc.com
|
|
When the modem node was re-located to a separate LTE source file
"sc7280-herobrine-lte-sku.dtsi", some of the previous LTE users
weren't marked appropriately. Fix this by marking all Qualcomm
reference devices as LTE.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: d42fae738f3a ("arm64: dts: qcom: Add LTE SKUs for sc7280-villager family")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-1-quic_sibis@quicinc.com
|
|
Fairphone 4 uses sdhc_2 for the SD card, configure the pins for it and
enable it.
The regulators which are exclusively used for SDHCI have their maximum
voltage decreased to what downstream sets on the consumer side, like on
many other platforms and allowed to set the load.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110151507.53650-1-luca.weiss@fairphone.com
|
|
spi-max-frequency is a property of SPI device, not the controller:
qcom/sm8450-hdk.dtb: geniqup@8c0000: spi@880000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110152741.542024-1-krzysztof.kozlowski@linaro.org
|
|
Enable HTE core and tegra HTE provider by default as built in
module.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add i2c Node to mt7986 devicetree.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20221106085034.12582-7-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
This patch adds crypto engine support for MT7986.
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20221106085034.12582-5-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
This arrange device tree nodes in alphabetical order.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221106085034.12582-2-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add pcie and pcie phy nodes for mt8195.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221103025656.8714-3-tinghan.shen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Enable missing configs in the arm64 defconfig to get all devices probing
on the mt8183-kukui-jacuzzi-juniper machine.
The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
to DP bridge (used for the internal display), MT8183 sound cards, SCP
co-processor, MediaTek Global Command Engine (controlled by CMDQ
driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
and voltage scaling, AUXADC thermal sensors.
All symbols are enabled as modules with the exception of SPI, which is
enabled as builtin since on some platforms like mt8195-cherry, the
ChromeOS Embedded Controller is connected through SPI and it is
responsible for the regulators powering the MMC controller used for the
SD card, and thus SPI support is required for booting.
By enabling the support for all of this machine's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221109195012.1231059-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add gpio pins present on new board revision:
* LTE modem support (imx8mm-gw7902 only)
- lte_pwr#
- lte_rst
- lte_int
* M2 power enable
- m2_pwr_en
* off-board 4.0V supply
- vdd_4p0_en
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop the header file execution permission
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no such always-enabled property supported by gpio-watchdog
driver or described in its bindings, remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the following dtbs_check warning on all of i.MX8M variants:
"
opp-table: Unevaluated properties are not allowed ('opp-25M', 'opp-100M', 'opp-750M' were unexpected)
"
Using the following command:
"
$ sed -i '/opp-[0-9]\+M/ s@M {@000000 {@' arch/arm64/boot/dts/freescale/imx8m*
"
The Documentation/devicetree/bindings/opp/opp-v2-base.yaml expects the OPP
subnode names to be full frequency listings in Hz without unit suffixes.
Only the i.MX8M DTs are affected per "git grep 'opp-[0-9]\+M'", so fix them.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The NAND controller size-cells should be 0 per DT bindings.
Fix the following warning produces by DT bindings check:
"
nand-controller@33002000: #size-cells:0:0: 0 was expected
nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
"
Fixes: 6c3debcbae47a ("arm64: dts: freescale: Add i.MX8MN dtsi support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The NAND controller size-cells should be 0 per DT bindings.
Fix the following warning produces by DT bindings check:
"
nand-controller@33002000: #size-cells:0:0: 0 was expected
nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
"
Fix the missing space in node name too.
Fixes: a05ea40eb384e ("arm64: dts: imx: Add i.mx8mm dtsi support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DT bindings checker is confused by the -gpio node suffix,
drop it to fix the following warning:
"
imx8mm-data-modul-edm-sbc.dtb: /: watchdog-gpio: {'pinctrl-names': ['default'], 'pinctrl-0': [[104]], 'compatible': ['linux,wdt-gpio'], 'always-enabled': True, 'gpios': [[45, 8, 0]], 'hw_algo': ['level'], 'hw_margin_ms': [[1500]], 'status': ['disabled']} is not of type 'array'
"
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
As both Dahlia and the Verdin Development Board have on-carrier
permanently attached USB hubs mark Verdin USB_2 as such.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add GPIO USB-B connector (gpio-usb-b-connector) functionality using
Verdin USB_1_ID.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Disable port power control on Verdin USB_1/2 as we use regular
fixed-regulators with Verdin USB_1/2_EN as enable GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Verdin USB_1 over-current detection functionality via Verdin
USB_1_OC# (SODIMM 157) being active-low and removing its previous
gpio_hog3 mapping.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The disable-over-current property is only applicable for the
ci-hdrc-usb2 and dwc2 drivers while the i.MX 8M Plus integrates dwc3
IP. Therefore remove this property which does not really serve any
purpose here.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
As we are using two fixed regulators for Verdin USB_1_EN (SODIMM 155)
and Verdin USB_2_EN (SODIMM 185), those should be muxed as GPIOs rather
than OTG_PWR.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Using extcon USB host mode works properly on DR interface, e.g.
enabling/disabling VBUS. But USB device mode is not working.
Fix this by switching to usb-role-switch instead.
Fixes: dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
MBa8MPxL (with TQMa8MPQL attached) needs this driver for PCIe reference
clock generation. Add it do default config.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the support for optional PWM fan 422J/2HP.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PCIe support on TQMa8MPxL module on MBa8MPxL mainboard.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX8MP DHCOM SoM does contain muRata 2AE WiFi+BT chip, bind the
bluetooth to UART2 using btbcm and hci_bcm drivers. Use PLL3 to drive
UART2 clock divided down to 64 MHz to obtain suitable block clock for
exact 4 Mbdps, which is the maximum supported baud rate by the muRata
2AE BT UART.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable usb phy to be wakeup source to support system wakeup
from usb.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently, when mapping the EFI runtime regions in the EFI page tables,
we complain about misaligned regions in a rather noisy way, using
WARN().
Not only does this produce a lot of irrelevant clutter in the log, it is
factually incorrect, as misaligned runtime regions are actually allowed
by the EFI spec as long as they don't require conflicting memory types
within the same 64k page.
So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking
for misalignment
- only revert to RWX mappings for non-code regions if misaligned code
regions are also known to exist.
Cc: <stable@vger.kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Every loader before Linux utilizes HSCIF0 with a speed of 1843200 bps.
Make Linux behave the same.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220613131033.10053-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Binding requires node name to be rng not trng:
trng@1020f000: $nodename:0: 'trng@1020f000' does not match '^rng@[0-9a-f]+$'
Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221027151022.5541-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add gpio-keys for exposing the LID switch state.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220730193617.1688563-1-bjorn.andersson@linaro.org
|
|
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org
|
|
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 12ef689f09ab ("arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-4-git-send-email-quic_srivasam@quicinc.com
|
|
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-3-git-send-email-quic_srivasam@quicinc.com
|
|
Update soundwire secondary nodes of WSA speaker to match with
dt-bindings pattern properties regular expression.
This modification is required to avoid dtbs-check errors
occurred with qcom,soundwire.yaml.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-2-git-send-email-quic_srivasam@quicinc.com
|