| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a DT node for Last level cache (aka. system cache)
controller which provides control over the last level
cache present on SC7280 SoC.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/5bacaa8350e0d9553dccd623a15513590e795b47.1615832893.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add device trees for OnePlus 5 (cheeseburger) and 5T (dumpling)
MSM8998 SoC smartphones with initial support included for:
- UFS internal storage
- USB peripheral mode
- Display
- Touch
- Bluetooth
- Hall effect sensor
- Power and volume buttons
- Capacitive keypad button backlight (on cheeseburger)
Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
Link: https://lore.kernel.org/r/20210406010708.2376807-2-jamipkettunen@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This was already the case for ADSP and SLPI remoteprocs & doesn't affect
existing boards where it has been re-enabled.
Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
Link: https://lore.kernel.org/r/20210406010708.2376807-3-jamipkettunen@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference
board with an S912 chip and the following specs:
- 3GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-4-christianshewitt@gmail.com
|
|
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference
board with an S905D chip and the following specs:
- 2GB DDR3 RAM
- 16GB eMMC
- 10/100 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-3-christianshewitt@gmail.com
|
|
This adds TRBE related registers and corresponding feature macros.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-5-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
tsb csync synchronizes the trace operation of instructions.
The instruction is a nop when FEAT_TRF is not implemented.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-4-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
We want the USB fixes in here as well and it resolves a merge issue with
xhci-mtk.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210330014610.1451198-1-sujitka@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This is a trgodor variant, required to have sound node variable
for coachz specific platform.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210314061054.19451-3-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add dai link for supporting lpass I2S driver, which is used
for audio capture and playback.
Add lpass-cpu node with pin controls and i2s primary
and secondary dai-links.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210314061054.19451-2-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Plug dp_phy-provided clocks to display clock controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210331151614.3810197-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
USB1 QMP PHY is not just a USB3 PHY, but USB3+DP PHY. Change device tree
nodes accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210331151614.3810197-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add DT entries for the sm8250 venus encoder/decoder.
Co-developed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Co-developed-by: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401174256.1810044-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This commit adds the videocc DTS node for sm8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401174256.1810044-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add interconnect nodes and add them for modem and cdsp nodes
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210401113252.3078466-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
RNG (Random Number Generator) in SM8350 features PRNG EE (Execution
Environment), hence add devicetree support for it.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210401101536.1014560-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add regulator devices for SC7280 as RPMh regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1617192339-3760-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Specify input clocks to the SDM845's Global Clock Controller as required
by the bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210402233944.273275-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable support for CP110 UTMI PHY in Armada SoC family platform
device trees.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add support for Marvell CP110 UTMI PHY in a CP11x DTSI
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.
So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.
This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87.
Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add "syscon" compatible to the North Bridge clocks node to allow the
cpufreq driver to access these registers via syscon API.
This is needed for a fix of cpufreq driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: e8d66e7927b2 ("arm64: dts: marvell: armada-37xx: add nodes...")
Cc: stable@vger.kernel.org
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add cooling maps suitable for a Noctua NF-A4/10 fan attached to the
heat sink. The fan will toggle between two speeds in operation which
seems to be normal behaviour. More fine-grained steps may help to
reduce this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add pwm-fan support for controlling the fan speed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
After the node name of "snps,dwc3" has been corrected to start with "usb"
in fsl,imx8mp-dwc3.yaml. Its name in dts should be modified accordingly.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210329072714.2135-3-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-3-geert+renesas@glider.be
|
|
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-2-geert+renesas@glider.be
|
|
The higher operating frequencies for the Cortex-A57 CPU cores, which
were first documented in the R-Car Gen3 Hardware User's Manual revision
0.54, apply to R-Car H3 ES2.0 (r8a77951).
Play it safe and restrict R-Car H3 ES1.x to 1.5 GHz, by removing the
"turbo-mode" entries from the operating points table inherited from
r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210311110552.3124180-1-geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig
* tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.13:
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
* tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: configs: enable FlexTimer alarm timer
arm64: configs: Select REALTEK_PHY as built-in
arm64: configs: Enable PCIe support for imx8mq boards
arm64: defconfig: Enable the Hantro decoder
arm64: defconfig: add imx8qm pinctrl support
arm64: defconfig: Enable wm8960 audio driver.
arm64: defconfig: Enable asoc simple mux
arm64: defconfig: Enable devfreq support for i.MX8MQ
Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
- add trivial bindings for MT8195
- fix dtbs_check warnings
- add pinmux for build-in Wifi on MT7622 evaluation borad
MT8183:
- fix USB wakeup register
- add regulator for EVB board
- add registers to mailbox consumers
- add thermal zone and trip points for CPU cooling
- Add new boards:
* ASUS Chromebook Flip CM3
* ASUS Chromebook Detachable CM3
* Acer Chromebook Spin 311
* Lenovo 10e Chromebook Tablet
MT8173:
- fix PHY property in DSI
- fix power-domain for PMIC wrapper
Pumkin:
- add MT8516 based board
- add MT8183 based board
- fix reset pin for MT8167 and MT8516 based boards
* tag 'v5.12-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
arm64: dts: mediatek: fix reset GPIO level on pumpkin
arm64: dts: mt8183: add mt8183 pumpkin board
dt-bindings: arm64: dts: mediatek: Add mt8183-pumpkin board
arm64: dts: mt8183: Add kukui kodama board
arm64: dts: mt8183: Add kukui kakadu board
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kodama
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kakadu
dt-bindings: arm64: dts: mediatek: Add mt8516-pumpkin board
arm64: dts: mt7622: add ePA/eLNA pinmux for built-in WiFi
dt-bindings: nvmem: mediatek: add support for MediaTek mt8192 SoC
arm64: dts: mt8173: fix wrong power-domain phandle of pmic
arm64: dts: mt8183: Configure CPU cooling
arm64: dts: mt8183: add thermal zone node
arm64: dts: mt8183: Add gce client reg for display subcomponents
arm64: dts: mediatek: mt8183: fix dtbs_check warning
arm64: dts: mediatek: mt7622: harmonize node names and compatibles
arm64: dts: mediatek: mt8516: harmonize node names and compatibles
arm64: dts: mediatek: mt2712: harmonize node names
arm64: dts: mediatek: mt8173: fix dtbs_check warning
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
...
Link: https://lore.kernel.org/r/d1121630-5778-0955-fac7-f921174defe7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree fixes for v5.12-rc6
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
* tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Link: https://lore.kernel.org/r/20210401172622.3352990-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno updates for v5.13
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
* tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable more SMMUs
arm64: dts: juno: Describe PCI dma-ranges
Link: https://lore.kernel.org/r/20210331100410.cenuhvpqoumvsk52@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.13:
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
* tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
arm64: dts: fsl-ls1028a-kontron-sl28: add rtc0 alias
arm64: dts: ls1028a: move rtc alias to individual boards
arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions
arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
arm64: dts: imx8mq-librem5: Hog the correct gpio
arm64: dts: lx2160a-clearfog-itx: add SFP support
arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART
arm64: dts: imx8mn: Reorder flexspi clock-names entry
arm64: dts: imx8mm: Reorder flexspi clock-names entry
arm64: dts: ls1028a: set up the real link speed for ENETC port 2
arm64: dts: imx8mm-nitrogen-r2: add ecspi2 support
arm64: dts: imx: add imx8qm mek support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8: switch to new lpcg clock binding
...
Link: https://lore.kernel.org/r/20210331041019.31345-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
* tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: fix switch parent node name
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe USB PHY
Link: https://lore.kernel.org/r/20210330184006.1451315-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.13
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
* tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: adjust qpsi read-delay property
arm64: dts: intel: socfpga_agilex_socdk_nand: align LED node names with dtschema
arm64: dts: intel: socfpga_agilex: align node names with dtschema
arm64: dts: intel: socfpga_agilex: use defined for GIC interrupts
arm64: dts: intel: socfpga_agilex: move usbphy out of soc node
arm64: dts: intel: socfpga_agilex: remove default status=okay
arm64: dts: intel: socfpga_agilex: move timer out of soc node
arm64: dts: intel: socfpga_agilex: move clocks out of soc node
arm64: dts: intel: socfpga: override clocks by label
Link: https://lore.kernel.org/r/20210330110430.558182-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The inline asm's addr operand is marked as input-only, however in
the case where an exception is taken it may be modified by the BIC
instruction on the exception path. Fix the problem by using a temporary
register as the destination register for the BIC instruction.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org
Link: https://linux-review.googlesource.com/id/I84538c8a2307d567b4f45bb20b715451005f9617
Link: https://lore.kernel.org/r/20210401165110.3952103-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The initialization of value in function armv8pmu_read_hw_counter()
and armv8pmu_read_counter() seem redundant, as they are soon updated.
So, We can remove them.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1617275801-1980-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-3-p.yadav@ti.com
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-2-p.yadav@ti.com
|
|
The tca6416 chip is active low. Fix the reset-gpios value.
Fixes: e2a8fa1e0faa ("arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210223221826.2063911-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.12, round 2:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.
* tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The MT8183 Pumpkin board is manufactured by OLogic and includes
a MediaTek MT8183 SoC with 2GB of RAM.
The board provides the following IOs:
* 2 USB Type-A ports
* Ethernet
* Serial UART over micro-USB port
* 1 USB Type-C dual role port
* 1 USB Type-C power only port
* 1 Jack for audio
* RPI compatible header
* MT7668 wiresless chip with Wi-Fi AC and BT 5
* Micro-HDMI port
* 2 connectors for CSI cameras
* 1 connector for DSI display
* 1 JTAG port
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210217205945.830006-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
To aid with debugging, add details of the source of a panic from nVHE
hyp. This is done by having nVHE hyp exit to nvhe_hyp_panic_handler()
rather than directly to panic(). The handler will then add the extra
details for debugging before panicking the kernel.
If the panic was due to a BUG(), look up the metadata to log the file
and line, if available, otherwise log an address that can be looked up
in vmlinux. The hyp offset is also logged to allow other hyp VAs to be
converted, similar to how the kernel offset is logged during a panic.
__hyp_panic_string is now inlined since it no longer needs to be
referenced as a symbol and the message is free to diverge between VHE
and nVHE.
The following is an example of the logs generated by a BUG in nVHE hyp.
[ 46.754840] kvm [307]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/switch.c:242!
[ 46.755357] kvm [307]: Hyp Offset: 0xfffea6c58e1e0000
[ 46.755824] Kernel panic - not syncing: HYP panic:
[ 46.755824] PS:400003c9 PC:0000d93a82c705ac ESR:f2000800
[ 46.755824] FAR:0000000080080000 HPFAR:0000000000800800 PAR:0000000000000000
[ 46.755824] VCPU:0000d93a880d0000
[ 46.756960] CPU: 3 PID: 307 Comm: kvm-vcpu-0 Not tainted 5.12.0-rc3-00005-gc572b99cf65b-dirty #133
[ 46.757459] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 46.758366] Call trace:
[ 46.758601] dump_backtrace+0x0/0x1b0
[ 46.758856] show_stack+0x18/0x70
[ 46.759057] dump_stack+0xd0/0x12c
[ 46.759236] panic+0x16c/0x334
[ 46.759426] arm64_kernel_unmapped_at_el0+0x0/0x30
[ 46.759661] kvm_arch_vcpu_ioctl_run+0x134/0x750
[ 46.759936] kvm_vcpu_ioctl+0x2f0/0x970
[ 46.760156] __arm64_sys_ioctl+0xa8/0xec
[ 46.760379] el0_svc_common.constprop.0+0x60/0x120
[ 46.760627] do_el0_svc+0x24/0x90
[ 46.760766] el0_svc+0x2c/0x54
[ 46.760915] el0_sync_handler+0x1a4/0x1b0
[ 46.761146] el0_sync+0x170/0x180
[ 46.761889] SMP: stopping secondary CPUs
[ 46.762786] Kernel Offset: 0x3e1cd2820000 from 0xffff800010000000
[ 46.763142] PHYS_OFFSET: 0xffffa9f680000000
[ 46.763359] CPU features: 0x00240022,61806008
[ 46.763651] Memory Limit: none
[ 46.813867] ---[ end Kernel panic - not syncing: HYP panic:
[ 46.813867] PS:400003c9 PC:0000d93a82c705ac ESR:f2000800
[ 46.813867] FAR:0000000080080000 HPFAR:0000000000800800 PAR:0000000000000000
[ 46.813867] VCPU:0000d93a880d0000 ]---
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-6-ascull@google.com
|
|
hyp_panic() reports the address of the panic by using ELR_EL2, but this
isn't a useful address when hyp_panic() is called directly. Replace such
direct calls with BUG() and BUG_ON() which use BRK to trigger an
exception that then goes to hyp_panic() with the correct address. Also
remove the hyp_panic() declaration from the header file to avoid
accidental misuse.
Signed-off-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-5-ascull@google.com
|
|
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/
Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")
The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
(according to the comments) only used for SDIO.
AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
them enabled. So the alias order should match the previous non-async order
for all of them.
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210203192824.854491-1-alexander.stein@mailbox.org
|
|
gen-hyprel tool parses object files of the EL2 portion of KVM
and generates runtime relocation data. While only filtering for
R_AARCH64_ABS64 relocations in the input object files, it has an
allow-list of relocation types that are used for relative
addressing. Other, unexpected, relocation types are rejected and
cause the build to fail.
This allow-list did not include the position-relative relocation
types R_AARCH64_PREL64/32/16 and the recently introduced _PLT32.
While not seen used by toolchains in the wild, add them to the
allow-list for completeness.
Fixes: 8c49b5d43d4c ("KVM: arm64: Generate hyp relocation data")
Cc: <stable@vger.kernel.org>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210331133048.63311-1-dbrazdil@google.com
|
