summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2020-12-10arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios"Jisheng Zhang1-3/+3
This is to remove similar errors as below: OF: /.../gpio-port@0: could not find phandle Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support") explained the reason of above errors well and added the generic "ngpios" property, let's use it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201210094056.54553-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds2-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-02Merge tag 'arm64-fixes' of ↵Linus Torvalds12-181/+243
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'm sad to say that we've got an unusually large arm64 fixes pull for rc7 which addresses numerous significant instrumentation issues with our entry code. Without these patches, lockdep is hopelessly unreliable in some configurations [1,2] and syzkaller is therefore not a lot of use because it's so noisy. Although much of this has always been broken, it appears to have been exposed more readily by other changes such as 044d0d6de9f5 ("lockdep: Only trace IRQ edges") and general lockdep improvements around IRQ tracing and NMIs. Fixing this properly required moving much of the instrumentation hooks from our entry assembly into C, which Mark has been working on for the last few weeks. We're not quite ready to move to the recently added generic functions yet, but the code here has been deliberately written to mimic that closely so we can look at cleaning things up once we have a bit more breathing room. Having said all that, the second version of these patches was posted last week and I pushed it into our CI (kernelci and cki) along with a commit which forced on PROVE_LOCKING, NOHZ_FULL and CONTEXT_TRACKING_FORCE. The result? We found a real bug in the md/raid10 code [3]. Oh, and there's also a really silly typo patch that's unrelated. Summary: - Fix numerous issues with instrumentation and exception entry - Fix hideous typo in unused register field definition" [1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com [2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com [3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor2-4/+1
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the NanoPi Neo Plus2. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201129194512.1475586-1-xypron.glpk@gmx.de
2020-12-01arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") iSCSI booting fails on the Pine A64 LTS. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201129162627.1244808-1-xypron.glpk@gmx.de
2020-11-30arm64: mte: Fix typo in macro definitionVincenzo Frascino1-1/+1
UL in the definition of SYS_TFSR_EL1_TF1 was misspelled causing compilation issues when trying to implement in kernel MTE async mode. Fix the macro correcting the typo. Note: MTE async mode will be introduced with a future series. Fixes: c058b1c4a5ea ("arm64: mte: system register definitions") Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201130170709.22309-1-vincenzo.frascino@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix EL1 debug transitionsMark Rutland2-25/+26
In debug_exception_enter() and debug_exception_exit() we trace hardirqs on/off while RCU isn't guaranteed to be watching, and we don't save and restore the hardirq state, and so may return with this having changed. Handle this appropriately with new entry/exit helpers which do the bare minimum to ensure this is appropriately maintained, without marking debug exceptions as NMIs. These are placed in entry-common.c with the other entry/exit helpers. In future we'll want to reconsider whether some debug exceptions should be NMIs, but this will require a significant refactoring, and for now this should prevent issues with lockdep and RCU. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marins <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix NMI {user, kernel}->kernel transitionsMark Rutland4-10/+48
Exceptions which can be taken at (almost) any time are consdiered to be NMIs. On arm64 that includes: * SDEI events * GICv3 Pseudo-NMIs * Kernel stack overflows * Unexpected/unhandled exceptions ... but currently debug exceptions (BRKs, breakpoints, watchpoints, single-step) are not considered NMIs. As these can be taken at any time, kernel features (lockdep, RCU, ftrace) may not be in a consistent kernel state. For example, we may take an NMI from the idle code or partway through an entry/exit path. While nmi_enter() and nmi_exit() handle most of this state, notably they don't save/restore the lockdep state across an NMI being taken and handled. When interrupts are enabled and an NMI is taken, lockdep may see interrupts become disabled within the NMI code, but not see interrupts become enabled when returning from the NMI, leaving lockdep believing interrupts are disabled when they are actually disabled. The x86 code handles this in idtentry_{enter,exit}_nmi(), which will shortly be moved to the generic entry code. As we can't use either yet, we copy the x86 approach in arm64-specific helpers. All the NMI entrypoints are marked as noinstr to prevent any instrumentation handling code being invoked before the state has been corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix non-NMI kernel<->kernel transitionsMark Rutland2-3/+67
There are periods in kernel mode when RCU is not watching and/or the scheduler tick is disabled, but we can still take exceptions such as interrupts. The arm64 exception handlers do not account for this, and it's possible that RCU is not watching while an exception handler runs. The x86/generic entry code handles this by ensuring that all (non-NMI) kernel exception handlers call irqentry_enter() and irqentry_exit(), which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to the generic entry code, and already hadnle the user<->kernel transitions elsewhere, so we add new kernel<->kernel transition helpers alog the lines of the generic entry code. Since we now track interrupts becoming masked when an exception is taken, local_daif_inherit() is modified to track interrupts becoming re-enabled when the original context is inherited. To balance the entry/exit paths, each handler masks all DAIF exceptions before exit_to_kernel_mode(). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: ptrace: prepare for EL1 irq/rcu trackingMark Rutland1-0/+4
Exceptions from EL1 may be taken when RCU isn't watching (e.g. in idle sequences), or when the lockdep hardirqs transiently out-of-sync with the hardware state (e.g. in the middle of local_irq_enable()). To correctly handle these cases, we'll need to save/restore this state across some exceptions taken from EL1. A series of subsequent patches will update EL1 exception handlers to handle this. In preparation for this, and to avoid dependencies between those patches, this patch adds two new fields to struct pt_regs so that exception handlers can track this state. Note that this is placed in pt_regs as some entry/exit sequences such as el1_irq are invoked from assembly, which makes it very difficult to add a separate structure as with the irqentry_state used by x86. We can separate this once more of the exception logic is moved to C. While the fields only need to be bool, they are both made u64 to keep pt_regs 16-byte aligned. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-9-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix non-NMI user<->kernel transitionsMark Rutland5-48/+51
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE will WARN() at boot time that interrupts are enabled when we call context_tracking_user_enter(), despite the DAIF flags indicating that IRQs are masked. The problem is that we're not tracking IRQ flag changes accurately, and so lockdep believes interrupts are enabled when they are not (and vice-versa). We can shuffle things so to make this more accurate. For kernel->user transitions there are a number of constraints we need to consider: 1) When we call __context_tracking_user_enter() HW IRQs must be disabled and lockdep must be up-to-date with this. 2) Userspace should be treated as having IRQs enabled from the PoV of both lockdep and tracing. 3) As context_tracking_user_enter() stops RCU from watching, we cannot use RCU after calling it. 4) IRQ flag tracing and lockdep have state that must be manipulated before RCU is disabled. ... with similar constraints applying for user->kernel transitions, with the ordering reversed. The generic entry code has enter_from_user_mode() and exit_to_user_mode() helpers to handle this. We can't use those directly, so we add arm64 copies for now (without the instrumentation markers which aren't used on arm64). These replace the existing user_exit() and user_exit_irqoff() calls spread throughout handlers, and the exception unmasking is left as-is. Note that: * The accounting for debug exceptions from userspace now happens in el0_dbg() and ret_to_user(), so this is removed from debug_exception_enter() and debug_exception_exit(). As user_exit_irqoff() wakes RCU, the userspace-specific check is removed. * The accounting for syscalls now happens in el0_svc(), el0_svc_compat(), and ret_to_user(), so this is removed from el0_svc_common(). This does not adversely affect the workaround for erratum 1463225, as this does not depend on any of the state tracking. * In ret_to_user() we mask interrupts with local_daif_mask(), and so we need to inform lockdep and tracing. Here a trace_hardirqs_off() is sufficient and safe as we have not yet exited kernel context and RCU is usable. * As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only needs to check for the latter. * EL0 SError handling will be dealt with in a subsequent patch, as this needs to be treated as an NMI. Prior to this patch, booting an appropriately-configured kernel would result in spats as below: | DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) | WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0 | Modules linked in: | CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3 | Hardware name: linux,dummy-virt (DT) | pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--) | pc : check_flags.part.54+0x1dc/0x1f0 | lr : check_flags.part.54+0x1dc/0x1f0 | sp : ffff80001003bd80 | x29: ffff80001003bd80 x28: ffff66ce801e0000 | x27: 00000000ffffffff x26: 00000000000003c0 | x25: 0000000000000000 x24: ffffc31842527258 | x23: ffffc31842491368 x22: ffffc3184282d000 | x21: 0000000000000000 x20: 0000000000000001 | x19: ffffc318432ce000 x18: 0080000000000000 | x17: 0000000000000000 x16: ffffc31840f18a78 | x15: 0000000000000001 x14: ffffc3184285c810 | x13: 0000000000000001 x12: 0000000000000000 | x11: ffffc318415857a0 x10: ffffc318406614c0 | x9 : ffffc318415857a0 x8 : ffffc31841f1d000 | x7 : 647261685f706564 x6 : ffffc3183ff7c66c | x5 : ffff66ce801e0000 x4 : 0000000000000000 | x3 : ffffc3183fe00000 x2 : ffffc31841500000 | x1 : e956dc24146b3500 x0 : 0000000000000000 | Call trace: | check_flags.part.54+0x1dc/0x1f0 | lock_is_held_type+0x10c/0x188 | rcu_read_lock_sched_held+0x70/0x98 | __context_tracking_enter+0x310/0x350 | context_tracking_enter.part.3+0x5c/0xc8 | context_tracking_user_enter+0x6c/0x80 | finish_ret_to_user+0x2c/0x13cr Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: move el1 irq/nmi logic to CMark Rutland4-45/+22
In preparation for reworking the EL1 irq/nmi entry code, move the existing logic to C. We no longer need the asm_nmi_enter() and asm_nmi_exit() wrappers, so these are removed. The new C functions are marked noinstr, which prevents compiler instrumentation and runtime probing. In subsequent patches we'll want the new C helpers to be called in all cases, so we don't bother wrapping the calls with ifdeferry. Even when the new C functions are stubs the trivial calls are unlikely to have a measurable impact on the IRQ or NMI paths anyway. Prototypes are added to <asm/exception.h> as otherwise (in some configurations) GCC will complain about the lack of a forward declaration. We already do this for existing function, e.g. enter_from_user_mode(). The new helpers are marked as noinstr (which prevents all instrumentation, tracing, and kprobes). Otherwise, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: prepare ret_to_user for function callMark Rutland1-4/+5
In a subsequent patch ret_to_user will need to make a C function call (in some configurations) which may clobber x0-x18 at the start of the finish_ret_to_user block, before enable_step_tsk consumes the flags loaded into x1. In preparation for this, let's load the flags into x19, which is preserved across C function calls. This avoids a redundant reload of the flags and ensures we operate on a consistent shapshot regardless. There should be no functional change as a result of this patch. At this point of the entry/exit paths we only need to preserve x28 (tsk) and the sp, and x19 is free for this use. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-6-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: move enter_from_user_mode to entry-common.cMark Rutland2-7/+6
In later patches we'll want to extend enter_from_user_mode() and add a corresponding exit_to_user_mode(). As these will be common for all entries/exits from userspace, it'd be better for these to live in entry-common.c with the rest of the entry logic. This patch moves enter_from_user_mode() into entry-common.c. As with other functions in entry-common.c it is marked as noinstr (which prevents all instrumentation, tracing, and kprobes) but there are no other functional changes. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: mark entry code as noinstrMark Rutland1-50/+25
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(), but they're still subject to other instrumentation which may rely on lockdep/rcu/context-tracking being up-to-date, and may cause nested exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt exceptions registers which have not yet been read. Prevent this by marking all functions in entry-common.c as noinstr to prevent compiler instrumentation. This also blacklists the functions for tracing and kprobes, so we don't need to handle that separately. Functions elsewhere will be dealt with in subsequent patches. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-4-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: mark idle code as noinstrMark Rutland1-4/+4
Core code disables RCU when calling arch_cpu_idle(), so it's not safe for arch_cpu_idle() or its calees to be instrumented, as the instrumentation callbacks may attempt to use RCU or other features which are unsafe to use in this context. Mark them noinstr to prevent issues. The use of local_irq_enable() in arch_cpu_idle() is similarly problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch queued in the tip tree addresses that case. Reported-by: Marco Elver <elver@google.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-3-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: syscall: exit userspace before unmasking exceptionsMark Rutland1-1/+1
In el0_svc_common() we unmask exceptions before we call user_exit(), and so there's a window where an IRQ or debug exception can be taken while RCU is not watching. In do_debug_exception() we account for this in via debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we call trace functions which rely on RCU before we have a guarantee that RCU is watching. Let's avoid this by having el0_svc_common() exit userspace before unmasking exceptions, matching what we do for all other EL0 entry paths. We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ flags while we're sure exceptions are masked in DAIF. The workaround for Cortex-A76 erratum 1463225 may trigger a debug exception before this point, but the debug code invoked in this case is safe even when RCU is not watching. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-29Merge tag 'locking-urgent-2020-11-29' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two more places which invoke tracing from RCU disabled regions in the idle path. Similar to the entry path the low level idle functions have to be non-instrumentable" * tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_idle: Fix intel_idle() vs tracing sched/idle: Fix arch_cpu_idle() vs tracing
2020-11-28Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds11-77/+67
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-2/+25
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix alignment of the new HYP sections - Fix GICR_TYPER access from userspace S390: - do not reset the global diag318 data for per-cpu reset - do not mark memory as protected too early - fix for destroy page ultravisor call x86: - fix for SEV debugging - fix incorrect return code - fix for 'noapic' with PIC in userspace and LAPIC in kernel - fix for 5-level paging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT KVM: x86: Fix split-irqchip vs interrupt injection window request KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint MAINTAINERS: Update email address for Sean Christopherson MAINTAINERS: add uv.c also to KVM/s390 s390/uv: handle destroy page legacy interface KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace KVM: SVM: fix error return code in svm_create_vcpu() KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt(). KVM: arm64: Correctly align nVHE percpu data KVM: s390: remove diag318 reset code KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
2020-11-27Merge tag 'arm64-fixes' of ↵Linus Torvalds2-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main changes are relating to our handling of access/dirty bits, where our low-level page-table helpers could lead to stale young mappings and loss of the dirty bit in some cases (the latter has not been observed in practice, but could happen when clearing "soft-dirty" if we enabled that). These were posted as part of a larger series, but the rest of that is less urgent and needs a v2 which I'll get to shortly. In other news, we've now got a set of fixes to resolve the lockdep/tracing problems that have been plaguing us for a while, but they're still a bit "fresh" and I plan to send them to you next week after we've got some more confidence in them (although initial CI results look good). Summary: - Fix kerneldoc warnings generated by ACPI IORT code - Fix pte_accessible() so that access flag is ignored - Fix missing header #include - Fix loss of software dirty bit across pte_wrprotect() when HW DBM is enabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() arm64: pgtable: Fix pte_accessible() ACPI/IORT: Fix doc warnings in iort.c arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
2020-11-27Merge tag 'kvmarm-fixes-5.10-4' of ↵Paolo Bonzini2-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for v5.10, take #4 - Fix alignment of the new HYP sections - Fix GICR_TYPER access from userspace
2020-11-27Merge tag 'tegra-for-5.10-arm64-dt-fixes' of ↵Arnd Bergmann5-27/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.10-rc6 This contains a couple of fixes to device trees. Among other things, this restores suspend/resume on Jetson TX2 and makes USB OTG work on Jetson TX1. * tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 Link: https://lore.kernel.org/r/20201125170306.1095734-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'zynqmp-soc-fixes-for-v5.10-rc6' of ↵Arnd Bergmann18-123/+153
https://github.com/Xilinx/linux-xlnx into arm/fixes arm64: soc: ZynqMP SoC fixes for v5.10-rc6 - Fix SD dll reset issue by using proper macro - Fix PM feature checking for Xilinx Versal SoC * tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits) firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue Linux 5.10-rc4 kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use afs: Fix afs_write_end() when called with copied == 0 [ver #3] ocfs2: initialize ip_next_orphan panic: don't dump stack twice on warn hugetlbfs: fix anon huge page migration race mm: memcontrol: fix missing wakeup polling thread kernel/watchdog: fix watchdog_allowed_mask not used warning reboot: fix overflow parsing reboot cpu number Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" compiler.h: fix barrier_data() on clang mm/gup: use unpin_user_pages() in __gup_longterm_locked() mm/slub: fix panic in slab_alloc_node() mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate mm/compaction: count pages and stop correctly during page isolation drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere ... Link: https://lore.kernel.org/r/fd5ab967-f3cf-95fb-7947-5477ff85f97e@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-25arm64: tegra: Fix Tegra234 VDK node namesJon Hunter1-3/+3
When the device-tree board file was added for the Tegra234 VDK simulator it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and 'mmc', respectively. The names 'bus' and 'mmc' are required by the device-tree json-schema validation tools. Therefore, fix this by renaming these nodes accordingly. Fixes: 639448912ba1 ("arm64: tegra: Initial Tegra234 VDK support") Reported-by: Ashish Singhal <ashishsingha@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-25arm64: tegra: Wrong AON HSP reg property sizeDipen Patel1-1/+1
The AON HSP node's "reg" property size 0xa0000 will overlap with other resources. This patch fixes that wrong value with correct size 0x90000. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Dipen Patel <dipenp@nvidia.com> Fixes: a38570c22e9d ("arm64: tegra: Add nodes for TCU on Tegra194") Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-25arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1JC Kuo1-10/+10
USB host mode is broken on the OTG port of Jetson TX1 platform because the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be regulator@14. Fixes: 257c8047be44 ("arm64: tegra: jetson-tx1: Add camera supplies") Cc: stable@vger.kernel.org Signed-off-by: JC Kuo <jckuo@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-25arm64: tegra: Correct the UART for Jetson Xavier NXJon Hunter1-1/+1
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC to a 12-pin debug header. The UARTs can be used by either the Tegra Combined UART (TCU) driver or the Tegra 8250 driver. By default, the TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250 node for UARTA. Fixes: 3f9efbbe57bc ("arm64: tegra: Add support for Jetson Xavier NX") Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-25arm64: tegra: Disable the ACONNECT for Jetson TX2Jon Hunter1-12/+0
Commit ff4c371d2bc0 ("arm64: defconfig: Build ADMA and ACONNECT driver") enable the Tegra ADMA and ACONNECT drivers and this is causing resume from system suspend to fail on Jetson TX2. Resume is failing because the ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT driver is attempting to power on a power-domain that is provided by the BPMP. While a proper fix for the resume sequencing problem is identified, disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system suspend. Please note that ACONNECT driver is used by the Audio Processing Engine (APE) on Tegra, but because there is no mainline support for APE on Jetson TX2 currently, disabling the ACONNECT does not disable any useful feature at the moment. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-24sched/idle: Fix arch_cpu_idle() vs tracingPeter Zijlstra1-1/+1
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU. Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry. (XXX: we really should change arch_cpu_idle() to not return with interrupts enabled) Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
2020-11-23Merge tag 'v5.10-rockchip-dtsfixes1' of ↵Arnd Bergmann4-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixed ordering for MMC devices on rk3399, due to a mmc change jumbling all ordering, a fix to make the Odroig Go Advance actually power down and using the correct clock name on the NanoPi R2S. * tag 'v5.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name Link: https://lore.kernel.org/r/11641389.O9o76ZdvQC@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-23arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()Will Deacon1-13/+14
With hardware dirty bit management, calling pte_wrprotect() on a writable, dirty PTE will lose the dirty state and return a read-only, clean entry. Move the logic from ptep_set_wrprotect() into pte_wrprotect() to ensure that the dirty bit is preserved for writable entries, as this is required for soft-dirty bit management if we enable it in the future. Cc: <stable@vger.kernel.org> Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201120143557.6715-3-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-23arm64: pgtable: Fix pte_accessible()Will Deacon1-3/+4
pte_accessible() is used by ptep_clear_flush() to figure out whether TLB invalidation is necessary when unmapping pages for reclaim. Although our implementation is correct according to the architecture, returning true only for valid, young ptes in the absence of racing page-table modifications, this is in fact flawed due to lazy invalidation of old ptes in ptep_clear_flush_young() where we elide the expensive DSB instruction for completing the TLB invalidation. Rather than penalise the aging path, adjust pte_accessible() to return true for any valid pte, even if the access flag is cleared. Cc: <stable@vger.kernel.org> Fixes: 76c714be0e5e ("arm64: pgtable: implement pte_accessible()") Reported-by: Yu Zhao <yuzhao@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201120143557.6715-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-23arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd buildRandy Dunlap1-0/+2
Adding <asm/exception.h> brought in <asm/kprobes.h> which uses <asm/probes.h>, which uses 'pstate_check_t' so the latter needs to #include <asm/insn.h> for this typedef. Fixes this build error: In file included from arch/arm64/include/asm/kprobes.h:24, from arch/arm64/include/asm/exception.h:11, from arch/arm64/kernel/fpsimd.c:35: arch/arm64/include/asm/probes.h:16:2: error: unknown type name 'pstate_check_t' 16 | pstate_check_t *pstate_cc; Fixes: c6b90d5cf637 ("arm64/fpsimd: Fix missing-prototypes in fpsimd.c") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/20201123044510.9942-1-rdunlap@infradead.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-17KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspaceZenghui Yu1-2/+20
It was recently reported that if GICR_TYPER is accessed before the RD base address is set, we'll suffer from the unset @rdreg dereferencing. Oops... gpa_t last_rdist_typer = rdreg->base + GICR_TYPER + (rdreg->free_index - 1) * KVM_VGIC_V3_REDIST_SIZE; It's "expected" that users will access registers in the redistributor if the RD has been properly configured (e.g., the RD base address is set). But it hasn't yet been covered by the existing documentation. Per discussion on the list [1], the reporting of the GICR_TYPER.Last bit for userspace never actually worked. And it's difficult for us to emulate it correctly given that userspace has the flexibility to access it any time. Let's just drop the reporting of the Last bit for userspace for now (userspace should have full knowledge about it anyway) and it at least prevents kernel from panic ;-) [1] https://lore.kernel.org/kvmarm/c20865a267e44d1e2c0d52ce4e012263@kernel.org/ Fixes: ba7b3f1275fd ("KVM: arm/arm64: Revisit Redistributor TYPER last bit computation") Reported-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20201117151629.1738-1-yuzenghui@huawei.com Cc: stable@vger.kernel.org
2020-11-17arm64: dts: qcom: clear the warnings caused by empty dma-rangesZhen Lei1-36/+36
The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported: arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \ (dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \ (dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2) Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-17arm64: dts: broadcom: clear the warnings caused by empty dma-rangesZhen Lei1-10/+10
The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported: arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2) Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com' Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-17Merge tag 'arm-soc-fixes-v5.10-2' of ↵Linus Torvalds25-57/+33
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Around one third of the fixes this time are for dts files that list their ethernet controller as using 'phy-mode="rgmii"' but are changed to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek, ksz9031, dp83867, ...) now configure the internal delay based on that when they used to stay on the hardware default. The long story is archived at https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/ I was trying to hold off on the bugfixes until there was a solution that would avoid breaking all boards, but that does not seem to be happening any time soon, so I am now sending the correct version of the dts files to ensure that at least these machines can use their network devices again. The other changes this time are: - Updating the MAINTAINER lists for Allwinner and Samsung SoCs - Multiple i.MX8MN machines get updates for their CPU operating points to match the data sheet - A revert for a dts patch that caused a regression in USB support on Odroid U3 - Two fixes for the AMD Tee driver, addressing a memory leak and missing locking - Mark the network subsystem on qoriq-fman3 as cache coherent for correctness as better performance. - Minor dts fixes elsewhere, addressing dtc warnings and similar problems" * tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid" ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 arm64: dts: renesas: r8a774e1: Add missing audio_clk_b tee: amdtee: synchronize access to shm list tee: amdtee: fix memory leak due to reset of global shm list arm64: dts: agilex/stratix10: Fix qspi node compatible ARM: dts: imx6q-prti6q: fix PHY address ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up ...
2020-11-16Merge tag 'imx-fixes-5.10-4' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16Merge tag 'renesas-fixes-for-v5.10-tag1' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.10 - Add missing audio clock on RZ/G2H. * tag 'renesas-fixes-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a774e1: Add missing audio_clk_b Link: https://lore.kernel.org/r/20201113151229.3924165-1-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16KVM: arm64: Correctly align nVHE percpu dataJamie Iles1-0/+5
The nVHE percpu data is partially linked but the nVHE linker script did not align the percpu section. The PERCPU_INPUT macro would then align the data to a page boundary: #define PERCPU_INPUT(cacheline) \ __per_cpu_start = .; \ *(.data..percpu..first) \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ PERCPU_DECRYPTED_SECTION \ __per_cpu_end = .; but then when the final vmlinux linking happens the hypervisor percpu data is included after page alignment and so the offsets potentially don't match. On my build I saw that the .hyp.data..percpu section was at address 0x20 and then the percpu data would begin at 0x1000 (because of the page alignment in PERCPU_INPUT), but when linked into vmlinux, everything would be shifted down by 0x20 bytes. This manifests as one of the CPUs getting lost when running kvm-unit-tests or starting any VM and subsequent soft lockup on a Cortex A72 device. Fixes: 30c953911c43 ("kvm: arm64: Set up hyp percpu data for nVHE") Signed-off-by: Jamie Iles <jamie@nuviainc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: David Brazdil <dbrazdil@google.com> Cc: David Brazdil <dbrazdil@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201113150406.14314-1-jamie@nuviainc.com
2020-11-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-44/+89
Pull kvm fixes from Paolo Bonzini: "Fixes for ARM and x86, the latter especially for old processors without two-dimensional paging (EPT/NPT)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guests KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch KVM: x86: clflushopt should be treated as a no-op by emulation KVM: arm64: Handle SCXTNUM_ELx traps KVM: arm64: Unify trap handlers injecting an UNDEF KVM: arm64: Allow setting of ID_AA64PFR0_EL1.CSV2 from userspace
2020-11-15Merge tag 'perf-urgent-2020-11-15' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes for perf: - A set of commits which reduce the stack usage of various perf event handling functions which allocated large data structs on stack causing stack overflows in the worst case - Use the proper mechanism for detecting soft interrupts in the recursion protection - Make the resursion protection simpler and more robust - Simplify the scheduling of event groups to make the code more robust and prepare for fixing the issues vs. scheduling of exclusive event groups - Prevent event multiplexing and rotation for exclusive event groups - Correct the perf event attribute exclusive semantics to take pinned events, e.g. the PMU watchdog, into account - Make the anythread filtering conditional for Intel's generic PMU counters as it is not longer guaranteed to be supported on newer CPUs. Check the corresponding CPUID leaf to make sure - Fixup a duplicate initialization in an array which was probably caused by the usual 'copy & paste - forgot to edit' mishap" * tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix Add BW copypasta perf/x86/intel: Make anythread filter support conditional perf: Tweak perf_event_attr::exclusive semantics perf: Fix event multiplexing for exclusive groups perf: Simplify group_sched_in() perf: Simplify group_sched_out() perf/x86: Make dummy_iregs static perf/arch: Remove perf_sample_data::regs_user_copy perf: Optimize get_recursion_context() perf: Fix get_recursion_context() perf/x86: Reduce stack usage for x86_pmu::drain_pebs() perf: Reduce stack usage of perf_output_begin()
2020-11-13Merge tag 'arm64-fixes' of ↵Linus Torvalds10-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Spectre/Meltdown safelisting for some Qualcomm KRYO cores - Fix RCU splat when failing to online a CPU due to a feature mismatch - Fix a recently introduced sparse warning in kexec() - Fix handling of CPU erratum 1418040 for late CPUs - Ensure hot-added memory falls within linear-mapped region * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist arm64: Add MIDR value for KRYO2XX gold/silver CPU cores arm64/mm: Validate hotplug range before creating linear mapping arm64: smp: Tell RCU about CPUs that fail to come online arm64: psci: Avoid printing in cpu_psci_cpu_die() arm64: kexec_file: Fix sparse warning arm64: errata: Fix handling of 1418040 with late CPU onlining
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of ↵Arnd Bergmann9-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'socfpga_fix_for_v5.10' of ↵Arnd Bergmann3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: fix for v5.10 - Fix the qspi node to have the required "jedec,spi-nor" Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'imx-fixes-5.10-3' of ↵Arnd Bergmann11-42/+15
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>