summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2021-03-30Merge tag 'kvmarm-fixes-5.12-3' of ↵Paolo Bonzini4-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.12, take #3 - Fix GICv3 MMIO compatibility probing - Prevent guests from using the ARMv8.4 self-hosted tracing extension
2021-03-26Merge tag 'soc-fixes-5.12' of ↵Linus Torvalds5-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Too many fixes have accumulated in the soc tree, so this is a fairly large set. As usual, most of the fixes are for devicetree files, but there are also notable code changes for imx and omap regressions as well as some maintainer file updates. imx: - Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by independent PHY reset. - Add missing `dma-coherent` property for LayerScape device trees to fix a kernel BUG report. - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with fw_devlink=on. - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to fix the broken I2C GPIO recovery support. - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval device tree to fix UBI filesystem mount failure. at91: - wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1 - restrictive pin possibilities for sam9x60 omap: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva stm32: - MAINTAINER file updates broadcom: - brcmstb SoC ID build fix - MAINTAINER file updates" * tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers. MAINTAINERS: Update some st.com email addresses to foss.st.com ARM: dts: imx6ull: fix ubi filesystem mount failed ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry arm64: dts: ls1012a: mark crypto engine dma coherent arm64: dts: ls1043a: mark crypto engine dma coherent arm64: dts: ls1046a: mark crypto engine dma coherent ARM: imx: avic: Convert to using IRQCHIP_DECLARE ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C ARM: dts: at91-sama5d27_som1: fix phy address to 7 soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
2021-03-25Merge tag 'arm64-fixes' of ↵Linus Torvalds12-10/+58
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Minor fixes all over, ranging from typos to tests to errata workarounds: - Fix possible memory hotplug failure with KASLR - Fix FFR value in SVE kselftest - Fix backtraces reported in /proc/$pid/stack - Disable broken CnP implementation on NVIDIA Carmel - Typo fixes and ACPI documentation clarification - Fix some W=1 warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: disable CNP on Carmel arm64/process.c: fix Wmissing-prototypes build warnings kselftest/arm64: sve: Do not use non-canonical FFR register value arm64: mm: correct the inside linear map range during hotplug check arm64: kdump: update ppos when reading elfcorehdr arm64: cpuinfo: Fix a typo Documentation: arm64/acpi : clarify arm64 support of IBFT arm64: stacktrace: don't trace arch_stack_walk() arm64: csum: cast to the proper type
2021-03-25arm64: kernel: disable CNP on CarmelRich Wiley4-2/+24
On NVIDIA Carmel cores, CNP behaves differently than it does on standard ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB entry created by core0 for a specific ASID, a non-shareable TLBI from core1 may still see the shared entry. On standard ARM cores, that TLBI will invalidate the shared entry as well. This causes issues with patchsets that attempt to do local TLBIs based on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling CNP support for NVIDIA Carmel cores. Signed-off-by: Rich Wiley <rwiley@nvidia.com> Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com [will: Fix pre-existing whitespace issue] Signed-off-by: Will Deacon <will@kernel.org>
2021-03-25arm64/process.c: fix Wmissing-prototypes build warningsManinder Singh3-0/+6
Fix GCC warnings reported when building with "-Wmissing-prototypes": arch/arm64/kernel/process.c:261:6: warning: no previous prototype for '__show_regs' [-Wmissing-prototypes] 261 | void __show_regs(struct pt_regs *regs) | ^~~~~~~~~~~ arch/arm64/kernel/process.c:307:6: warning: no previous prototype for '__show_regs_alloc_free' [-Wmissing-prototypes] 307 | void __show_regs_alloc_free(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/process.c:365:5: warning: no previous prototype for 'arch_dup_task_struct' [-Wmissing-prototypes] 365 | int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) | ^~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/process.c:546:41: warning: no previous prototype for '__switch_to' [-Wmissing-prototypes] 546 | __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev, | ^~~~~~~~~~~ arch/arm64/kernel/process.c:710:25: warning: no previous prototype for 'arm64_preempt_schedule_irq' [-Wmissing-prototypes] 710 | asmlinkage void __sched arm64_preempt_schedule_irq(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/lkml/202103192250.AennsfXM-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Link: https://lore.kernel.org/r/1616568899-986-1-git-send-email-maninder1.s@samsung.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-24KVM: arm64: Fix CPU interface MMIO compatibility detectionMarc Zyngier1-0/+9
In order to detect whether a GICv3 CPU interface is MMIO capable, we switch ICC_SRE_EL1.SRE to 0 and check whether it sticks. However, this is only possible if *ALL* of the HCR_EL2 interrupt overrides are set, and the CPU is perfectly allowed to ignore the write to ICC_SRE_EL1 otherwise. This leads KVM to pretend that a whole bunch of ARMv8.0 CPUs aren't MMIO-capable, and breaks VMs that should work correctly otherwise. Fix this by setting IMO/FMO/IMO before touching ICC_SRE_EL1, and clear them afterwards. This allows us to reliably detect the CPU interface capabilities. Tested-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Fixes: 9739f6ef053f ("KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility") Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-24KVM: arm64: Disable guest access to trace filter controlsSuzuki K Poulose2-0/+3
Disable guest access to the Trace Filter control registers. We do not advertise the Trace filter feature to the guest (ID_AA64DFR0_EL1: TRACE_FILT is cleared) already, but the guest can still access the TRFCR_EL1 unless we trap it. This will also make sure that the guest cannot fiddle with the filtering controls set by a nvhe host. Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210323120647.454211-3-suzuki.poulose@arm.com
2021-03-24KVM: arm64: Hide system instruction access to Trace registersSuzuki K Poulose1-1/+0
Currently we advertise the ID_AA6DFR0_EL1.TRACEVER for the guest, when the trace register accesses are trapped (CPTR_EL2.TTA == 1). So, the guest will get an undefined instruction, if trusts the ID registers and access one of the trace registers. Lets be nice to the guest and hide the feature to avoid unexpected behavior. Even though this can be done at KVM sysreg emulation layer, we do this by removing the TRACEVER from the sanitised feature register field. This is fine as long as the ETM drivers can handle the individual trace units separately, even when there are differences among the CPUs. Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210323120647.454211-2-suzuki.poulose@arm.com
2021-03-22arm64: mm: correct the inside linear map range during hotplug checkPavel Tatashin1-2/+19
Memory hotplug may fail on systems with CONFIG_RANDOMIZE_BASE because the linear map range is not checked correctly. The start physical address that linear map covers can be actually at the end of the range because of randomization. Check that and if so reduce it to 0. This can be verified on QEMU with setting kaslr-seed to ~0ul: memstart_offset_seed = 0xffff START: __pa(_PAGE_OFFSET(vabits_actual)) = ffff9000c0000000 END: __pa(PAGE_END - 1) = 1000bfffffff Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Fixes: 58284a901b42 ("arm64/mm: Validate hotplug range before creating linear mapping") Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20210216150351.129018-2-pasha.tatashin@soleen.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-22arm64: kdump: update ppos when reading elfcorehdrPavel Tatashin1-0/+2
The ppos points to a position in the old kernel memory (and in case of arm64 in the crash kernel since elfcorehdr is passed as a segment). The function should update the ppos by the amount that was read. This bug is not exposed by accident, but other platforms update this value properly. So, fix it in ARM64 version of elfcorehdr_read() as well. Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Fixes: e62aaeac426a ("arm64: kdump: provide /proc/vmcore file") Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Link: https://lore.kernel.org/r/20210319205054.743368-1-pasha.tatashin@soleen.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-22arm64: cpuinfo: Fix a typoBhaskar Chowdhury1-1/+1
s/acurate/accurate/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210319222848.29928-1-unixbhaskar@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-22arm64: stacktrace: don't trace arch_stack_walk()Mark Rutland1-4/+5
We recently converted arm64 to use arch_stack_walk() in commit: 5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK") The core stacktrace code expects that (when tracing the current task) arch_stack_walk() starts a trace at its caller, and does not include itself in the trace. However, arm64's arch_stack_walk() includes itself, and so traces include one more entry than callers expect. The core stacktrace code which calls arch_stack_walk() tries to skip a number of entries to prevent itself appearing in a trace, and the additional entry prevents skipping one of the core stacktrace functions, leaving this in the trace unexpectedly. We can fix this by having arm64's arch_stack_walk() begin the trace with its caller. The first value returned by the trace will be __builtin_return_address(0), i.e. the caller of arch_stack_walk(). The first frame record to be unwound will be __builtin_frame_address(1), i.e. the caller's frame record. To prevent surprises, arch_stack_walk() is also marked noinline. While __builtin_frame_address(1) is not safe in portable code, local GCC developers have confirmed that it is safe on arm64. To find the caller's frame record, the builtin can safely dereference the current function's frame record or (in theory) could stash the original FP into another GPR at function entry time, neither of which are problematic. Prior to this patch, the tracing code would unexpectedly show up in traces of the current task, e.g. | # cat /proc/self/stack | [<0>] stack_trace_save_tsk+0x98/0x100 | [<0>] proc_pid_stack+0xb4/0x130 | [<0>] proc_single_show+0x60/0x110 | [<0>] seq_read_iter+0x230/0x4d0 | [<0>] seq_read+0xdc/0x130 | [<0>] vfs_read+0xac/0x1e0 | [<0>] ksys_read+0x6c/0xfc | [<0>] __arm64_sys_read+0x20/0x30 | [<0>] el0_svc_common.constprop.0+0x60/0x120 | [<0>] do_el0_svc+0x24/0x90 | [<0>] el0_svc+0x2c/0x54 | [<0>] el0_sync_handler+0x1a4/0x1b0 | [<0>] el0_sync+0x170/0x180 After this patch, the tracing code will not show up in such traces: | # cat /proc/self/stack | [<0>] proc_pid_stack+0xb4/0x130 | [<0>] proc_single_show+0x60/0x110 | [<0>] seq_read_iter+0x230/0x4d0 | [<0>] seq_read+0xdc/0x130 | [<0>] vfs_read+0xac/0x1e0 | [<0>] ksys_read+0x6c/0xfc | [<0>] __arm64_sys_read+0x20/0x30 | [<0>] el0_svc_common.constprop.0+0x60/0x120 | [<0>] do_el0_svc+0x24/0x90 | [<0>] el0_svc+0x2c/0x54 | [<0>] el0_sync_handler+0x1a4/0x1b0 | [<0>] el0_sync+0x170/0x180 Erring on the side of caution, I've given this a spin with a bunch of toolchains, verifying the output of /proc/self/stack and checking that the assembly looked sound. For GCC (where we require version 5.1.0 or later) I tested with the kernel.org crosstool binares for versions 5.5.0, 6.4.0, 6.5.0, 7.3.0, 7.5.0, 8.1.0, 8.3.0, 8.4.0, 9.2.0, and 10.1.0. For clang (where we require version 10.0.1 or later) I tested with the llvm.org binary releases of 11.0.0, and 11.0.1. Fixes: 5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Jun <chenjun102@huawei.com> Cc: Marco Elver <elver@google.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> # 5.10.x Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210319184106.5688-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-15arm64: csum: cast to the proper typeAlex Elder1-1/+1
The last line of ip_fast_csum() calls csum_fold(), forcing the type of the argument passed to be u32. But csum_fold() takes a __wsum argument (which is __u32 __bitwise for arm64). As long as we're forcing the cast, cast it to the right type. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210315012650.1221328-1-elder@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-15arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entryTeresa Remmet2-2/+2
Add missing pinctrl-names for i2c gpio recovery mode. Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP") Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-15arm64: dts: ls1012a: mark crypto engine dma coherentHoria Geantă1-0/+1
Crypto engine (CAAM) on LS1012A platform is configured HW-coherent, mark accordingly the DT node. Lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, similar to what has been reported for LS1046A. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 85b85c569507 ("arm64: dts: ls1012a: add crypto node") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-15arm64: dts: ls1043a: mark crypto engine dma coherentHoria Geantă1-0/+1
Crypto engine (CAAM) on LS1043A platform is configured HW-coherent, mark accordingly the DT node. Lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, similar to what has been reported for LS1046A. Cc: <stable@vger.kernel.org> # v4.8+ Fixes: 63dac35b58f4 ("arm64: dts: ls1043a: add crypto node") Link: https://lore.kernel.org/linux-crypto/fe6faa24-d8f7-d18f-adfa-44fa0caa1598@arm.com Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-15arm64: dts: ls1046a: mark crypto engine dma coherentHoria Geantă1-0/+1
Crypto engine (CAAM) on LS1046A platform is configured HW-coherent, mark accordingly the DT node. As reported by Greg and Sascha, and explained by Robin, lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, e.g. on v5.11: > kernel BUG at drivers/crypto/caam/jr.c:247! > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP > Modules linked in: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.11.0-20210225-3-00039-g434215968816-dirty #12 > Hardware name: TQ TQMLS1046A SoM on Arkona AT1130 (C300) board (DT) > pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) > pc : caam_jr_dequeue+0x98/0x57c > lr : caam_jr_dequeue+0x98/0x57c > sp : ffff800010003d50 > x29: ffff800010003d50 x28: ffff8000118d4000 > x27: ffff8000118d4328 x26: 00000000000001f0 > x25: ffff0008022be480 x24: ffff0008022c6410 > x23: 00000000000001f1 x22: ffff8000118d4329 > x21: 0000000000004d80 x20: 00000000000001f1 > x19: 0000000000000001 x18: 0000000000000020 > x17: 0000000000000000 x16: 0000000000000015 > x15: ffff800011690230 x14: 2e2e2e2e2e2e2e2e > x13: 2e2e2e2e2e2e2020 x12: 3030303030303030 > x11: ffff800011700a38 x10: 00000000fffff000 > x9 : ffff8000100ada30 x8 : ffff8000116a8a38 > x7 : 0000000000000001 x6 : 0000000000000000 > x5 : 0000000000000000 x4 : 0000000000000000 > x3 : 00000000ffffffff x2 : 0000000000000000 > x1 : 0000000000000000 x0 : 0000000000001800 > Call trace: > caam_jr_dequeue+0x98/0x57c > tasklet_action_common.constprop.0+0x164/0x18c > tasklet_action+0x44/0x54 > __do_softirq+0x160/0x454 > __irq_exit_rcu+0x164/0x16c > irq_exit+0x1c/0x30 > __handle_domain_irq+0xc0/0x13c > gic_handle_irq+0x5c/0xf0 > el1_irq+0xb4/0x180 > arch_cpu_idle+0x18/0x30 > default_idle_call+0x3c/0x1c0 > do_idle+0x23c/0x274 > cpu_startup_entry+0x34/0x70 > rest_init+0xdc/0xec > arch_call_rest_init+0x1c/0x28 > start_kernel+0x4ac/0x4e4 > Code: 91392021 912c2000 d377d8c6 97f24d96 (d4210000) Cc: <stable@vger.kernel.org> # v4.10+ Fixes: 8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support") Link: https://lore.kernel.org/linux-crypto/fe6faa24-d8f7-d18f-adfa-44fa0caa1598@arm.com Reported-by: Greg Ungerer <gerg@kernel.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Greg Ungerer <gerg@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds19-53/+137
Pull KVM fixes from Paolo Bonzini: "More fixes for ARM and x86" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: LAPIC: Advancing the timer expiration on guest initiated write KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged kvm: x86: annotate RCU pointers KVM: arm64: Fix exclusive limit for IPA size KVM: arm64: Reject VM creation when the default IPA size is unsupported KVM: arm64: Ensure I-cache isolation between vcpus of a same VM KVM: arm64: Don't use cbz/adr with external symbols KVM: arm64: Fix range alignment when walking page tables KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config() KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key KVM: arm64: Fix nVHE hyp panic host context restore KVM: arm64: Avoid corrupting vCPU context register in guest exit KVM: arm64: nvhe: Save the SPE context early kvm: x86: use NULL instead of using plain integer as pointer KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled' KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
2021-03-12KVM: arm64: Fix exclusive limit for IPA sizeMarc Zyngier1-2/+1
When registering a memslot, we check the size and location of that memslot against the IPA size to ensure that we can provide guest access to the whole of the memory. Unfortunately, this check rejects memslot that end-up at the exact limit of the addressing capability for a given IPA size. For example, it refuses the creation of a 2GB memslot at 0x8000000 with a 32bit IPA space. Fix it by relaxing the check to accept a memslot reaching the limit of the IPA space. Fixes: c3058d5da222 ("arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE") Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20210311100016.3830038-3-maz@kernel.org
2021-03-12KVM: arm64: Reject VM creation when the default IPA size is unsupportedMarc Zyngier1-4/+8
KVM/arm64 has forever used a 40bit default IPA space, partially due to its 32bit heritage (where the only choice is 40bit). However, there are implementations in the wild that have a *cough* much smaller *cough* IPA space, which leads to a misprogramming of VTCR_EL2, and a guest that is stuck on its first memory access if userspace dares to ask for the default IPA setting (which most VMMs do). Instead, blundly reject the creation of such VM, as we can't satisfy the requirements from userspace (with a one-off warning). Also clarify the boot warning, and document that the VM creation will fail when an unsupported IPA size is provided. Although this is an ABI change, it doesn't really change much for userspace: - the guest couldn't run before this change, but no error was returned. At least userspace knows what is happening. - a memory slot that was accepted because it did fit the default IPA space now doesn't even get a chance to be registered. The other thing that is left doing is to convince userspace to actually use the IPA space setting instead of relying on the antiquated default. Fixes: 233a7cb23531 ("kvm: arm64: Allow tuning the physical address size for VM") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20210311100016.3830038-2-maz@kernel.org
2021-03-11arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]Ard Biesheuvel1-14/+0
These routines lost all existing users during the latest merge window so we can remove them. This avoids the need to fix them in the context of fixing a regression related to the ID map on 52-bit VA kernels. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210310171515.416643-3-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-11arm64: mm: use a 48-bit ID map when possible on 52-bit VA buildsArd Biesheuvel3-6/+3
52-bit VA kernels can run on hardware that is only 48-bit capable, but configure the ID map as 52-bit by default. This was not a problem until recently, because the special T0SZ value for a 52-bit VA space was never programmed into the TCR register anwyay, and because a 52-bit ID map happens to use the same number of translation levels as a 48-bit one. This behavior was changed by commit 1401bef703a4 ("arm64: mm: Always update TCR_EL1 from __cpu_set_tcr_t0sz()"), which causes the unsupported T0SZ value for a 52-bit VA to be programmed into TCR_EL1. While some hardware simply ignores this, Mark reports that Amberwing systems choke on this, resulting in a broken boot. But even before that commit, the unsupported idmap_t0sz value was exposed to KVM and used to program TCR_EL2 incorrectly as well. Given that we already have to deal with address spaces being either 48-bit or 52-bit in size, the cleanest approach seems to be to simply default to a 48-bit VA ID map, and only switch to a 52-bit one if the placement of the kernel in DRAM requires it. This is guaranteed not to happen unless the system is actually 52-bit VA capable. Fixes: 90ec95cda91a ("arm64: mm: Introduce VA_BITS_MIN") Reported-by: Mark Salter <msalter@redhat.com> Link: http://lore.kernel.org/r/20210310003216.410037-1-msalter@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210310171515.416643-2-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10arm64: perf: Fix 64-bit event counter read truncationRob Herring1-1/+1
Commit 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") changed armv8pmu_read_evcntr() to return a u32 instead of u64. The result is silent truncation of the event counter when using 64-bit counters. Given the offending commit appears to have passed thru several folks, it seems likely this was a bad rebase after v8.5 PMU 64-bit counters landed. Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: <stable@vger.kernel.org> Fixes: 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210310004412.1450128-1-robh@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10arm64/mm: Fix __enable_mmu() for new TGRAN range valuesJames Morse3-12/+24
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1 might contain a range of values to describe supported translation granules (4K and 16K pages sizes in particular) instead of just enabled or disabled values. This changes __enable_mmu() function to handle complete acceptable range of values (depending on whether the field is signed or unsigned) now represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here, also fix similar situations in EFI stub and KVM as well. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-efi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10arm64: mte: Map hotplugged memory as Normal TaggedCatalin Marinas3-2/+5
In a system supporting MTE, the linear map must allow reading/writing allocation tags by setting the memory type as Normal Tagged. Currently, this is only handled for memory present at boot. Hotplugged memory uses Normal non-Tagged memory. Introduce pgprot_mhp() for hotplugged memory and use it in add_memory_resource(). The arm64 code maps pgprot_mhp() to pgprot_tagged(). Note that ZONE_DEVICE memory should not be mapped as Tagged and therefore setting the memory type in arch_add_memory() is not feasible. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map") Reported-by: Patrick Daly <pdaly@codeaurora.org> Tested-by: Patrick Daly <pdaly@codeaurora.org> Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-09KVM: arm64: Ensure I-cache isolation between vcpus of a same VMMarc Zyngier5-8/+15
It recently became apparent that the ARMv8 architecture has interesting rules regarding attributes being used when fetching instructions if the MMU is off at Stage-1. In this situation, the CPU is allowed to fetch from the PoC and allocate into the I-cache (unless the memory is mapped with the XN attribute at Stage-2). If we transpose this to vcpus sharing a single physical CPU, it is possible for a vcpu running with its MMU off to influence another vcpu running with its MMU on, as the latter is expected to fetch from the PoU (and self-patching code doesn't flush below that level). In order to solve this, reuse the vcpu-private TLB invalidation code to apply the same policy to the I-cache, nuking it every time the vcpu runs on a physical CPU that ran another vcpu of the same VM in the past. This involve renaming __kvm_tlb_flush_local_vmid() to __kvm_flush_cpu_context(), and inserting a local i-cache invalidation there. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210303164505.68492-1-maz@kernel.org
2021-03-09arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUALAndrey Konovalov1-0/+5
When CONFIG_DEBUG_VIRTUAL is enabled, the default page_to_virt() macro implementation from include/linux/mm.h is used. That definition doesn't account for KASAN tags, which leads to no tags on page_alloc allocations. Provide an arm64-specific definition for page_to_virt() when CONFIG_DEBUG_VIRTUAL is enabled that takes care of KASAN tags. Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Cc: <stable@vger.kernel.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/4b55b35202706223d3118230701c6a59749d9b72.1615219501.git.andreyknvl@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-09KVM: arm64: Don't use cbz/adr with external symbolsSami Tolvanen1-2/+4
allmodconfig + CONFIG_LTO_CLANG_THIN=y fails to build due to following linker errors: ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21CC): relocation R_AARCH64_CONDBR19 out of range: 2031220 is not in [-1048576, 1048575]; references hyp_panic >>> defined in vmlinux.o ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21E0): relocation R_AARCH64_ADR_PREL_LO21 out of range: 2031200 is not in [-1048576, 1048575]; references hyp_panic >>> defined in vmlinux.o This is because with LTO, the compiler ends up placing hyp_panic() more than 1MB away from __guest_enter(). Use an unconditional branch and adr_l instead to fix the issue. Link: https://github.com/ClangBuiltLinux/linux/issues/1317 Reported-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Marc Zyngier <maz@kernel.org> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Will Deacon <will@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210305202124.3768527-1-samitolvanen@google.com
2021-03-08arm64/mm: Reorganize pfn_valid()Anshuman Khandual1-5/+16
There are multiple instances of pfn_to_section_nr() and __pfn_to_section() when CONFIG_SPARSEMEM is enabled. This can be optimized if memory section is fetched earlier. This replaces the open coded PFN and ADDR conversion with PFN_PHYS() and PHYS_PFN() helpers. While there, also add a comment. This does not cause any functional change. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614921898-4099-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memoryAnshuman Khandual1-0/+12
pfn_valid() validates a pfn but basically it checks for a valid struct page backing for that pfn. It should always return positive for memory ranges backed with struct page mapping. But currently pfn_valid() fails for all ZONE_DEVICE based memory types even though they have struct page mapping. pfn_valid() asserts that there is a memblock entry for a given pfn without MEMBLOCK_NOMAP flag being set. The problem with ZONE_DEVICE based memory is that they do not have memblock entries. Hence memblock_is_map_memory() will invariably fail via memblock_search() for a ZONE_DEVICE based address. This eventually fails pfn_valid() which is wrong. memblock_is_map_memory() needs to be skipped for such memory ranges. As ZONE_DEVICE memory gets hotplugged into the system via memremap_pages() called from a driver, their respective memory sections will not have SECTION_IS_EARLY set. Normal hotplug memory will never have MEMBLOCK_NOMAP set in their memblock regions. Because the flag MEMBLOCK_NOMAP was specifically designed and set for firmware reserved memory regions. memblock_is_map_memory() can just be skipped as its always going to be positive and that will be an optimization for the normal hotplug memory. Like ZONE_DEVICE based memory, all normal hotplugged memory too will not have SECTION_IS_EARLY set for their sections Skipping memblock_is_map_memory() for all non early memory sections would fix pfn_valid() problem for ZONE_DEVICE based memory and also improve its performance for normal hotplug memory as well. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: David Hildenbrand <david@redhat.com> Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614921898-4099-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDERAnshuman Khandual1-2/+2
Currently without THP being enabled, MAX_ORDER via FORCE_MAX_ZONEORDER gets reduced to 11, which falls below HUGETLB_PAGE_ORDER for certain 16K and 64K page size configurations. This is problematic which throws up the following warning during boot as pageblock_order via HUGETLB_PAGE_ORDER order exceeds MAX_ORDER. WARNING: CPU: 7 PID: 127 at mm/vmstat.c:1092 __fragmentation_index+0x58/0x70 Modules linked in: CPU: 7 PID: 127 Comm: kswapd0 Not tainted 5.12.0-rc1-00005-g0221e3101a1 #237 Hardware name: linux,dummy-virt (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : __fragmentation_index+0x58/0x70 lr : fragmentation_index+0x88/0xa8 sp : ffff800016ccfc00 x29: ffff800016ccfc00 x28: 0000000000000000 x27: ffff800011fd4000 x26: 0000000000000002 x25: ffff800016ccfda0 x24: 0000000000000002 x23: 0000000000000640 x22: ffff0005ffcb5b18 x21: 0000000000000002 x20: 000000000000000d x19: ffff0005ffcb3980 x18: 0000000000000004 x17: 0000000000000001 x16: 0000000000000019 x15: ffff800011ca7fb8 x14: 00000000000002b3 x13: 0000000000000000 x12: 00000000000005e0 x11: 0000000000000003 x10: 0000000000000080 x9 : ffff800011c93948 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000007000 x5 : 0000000000007944 x4 : 0000000000000032 x3 : 000000000000001c x2 : 000000000000000b x1 : ffff800016ccfc10 x0 : 000000000000000d Call trace: __fragmentation_index+0x58/0x70 compaction_suitable+0x58/0x78 wakeup_kcompactd+0x8c/0xd8 balance_pgdat+0x570/0x5d0 kswapd+0x1e0/0x388 kthread+0x154/0x158 ret_from_fork+0x10/0x30 This solves the problem via keeping FORCE_MAX_ZONEORDER unchanged with or without THP on 16K and 64K page size configurations, making sure that the HUGETLB_PAGE_ORDER (and pageblock_order) would never exceed MAX_ORDER. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614597914-28565-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHAREAnshuman Khandual1-2/+0
There is already an ARCH_WANT_HUGE_PMD_SHARE which is being selected for applicable configurations. Hence just drop the other redundant entry. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1614575192-21307-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64: Drop support for CMDLINE_EXTENDWill Deacon2-10/+1
The documented behaviour for CMDLINE_EXTEND is that the arguments from the bootloader are appended to the built-in kernel command line. This also matches the option parsing behaviour for the EFI stub and early ID register overrides. Bizarrely, the fdt behaviour is the other way around: appending the built-in command line to the bootloader arguments, resulting in a command-line that doesn't necessarily line-up with the parsing order and definitely doesn't line-up with the documented behaviour. As it turns out, there is a proposal [1] to replace CMDLINE_EXTEND with CMDLINE_PREPEND and CMDLINE_APPEND options which should hopefully make the intended behaviour much clearer. While we wait for those to land, drop CMDLINE_EXTEND for now as there appears to be little enthusiasm for changing the current FDT behaviour. [1] https://lore.kernel.org/lkml/20190319232448.45964-2-danielwa@cisco.com/ Cc: Max Uvarov <muvarov@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/CAL_JsqJX=TCCs7=gg486r9TN4NYscMTCLNfqJF9crskKPq-bTg@mail.gmail.com Link: https://lore.kernel.org/r/20210303134927.18975-3-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overridesWill Deacon1-19/+25
The built-in kernel commandline (CONFIG_CMDLINE) can be configured in three different ways: 1. CMDLINE_FORCE: Use CONFIG_CMDLINE instead of any bootloader args 2. CMDLINE_EXTEND: Append the bootloader args to CONFIG_CMDLINE 3. CMDLINE_FROM_BOOTLOADER: Only use CONFIG_CMDLINE if there aren't any bootloader args. The early cmdline parsing to detect idreg overrides gets (2) and (3) slightly wrong: in the case of (2) the bootloader args are parsed first and in the case of (3) the CMDLINE is always parsed. Fix these issues by moving the bootargs parsing out into a helper function and following the same logic as that used by the EFI stub. Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 33200303553d ("arm64: cpufeature: Add an early command-line cpufeature override facility") Link: https://lore.kernel.org/r/20210303134927.18975-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-06KVM: arm64: Fix range alignment when walking page tablesJia He1-0/+1
When walking the page tables at a given level, and if the start address for the range isn't aligned for that level, we propagate the misalignment on each iteration at that level. This results in the walker ignoring a number of entries (depending on the original misalignment) on each subsequent iteration. Properly aligning the address before the next iteration addresses this issue. Cc: stable@vger.kernel.org Reported-by: Howard Zhang <Howard.Zhang@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Jia He <justin.he@arm.com> Fixes: b1e57de62cfb ("KVM: arm64: Add stand-alone page-table walker infrastructure") [maz: rewrite commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210303024225.2591-1-justin.he@arm.com Message-Id: <20210305185254.3730990-9-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibilityMarc Zyngier2-4/+39
It looks like we have broken firmware out there that wrongly advertises a GICv2 compatibility interface, despite the CPUs not being able to deal with it. To work around this, check that the CPU initialising KVM is actually able to switch to MMIO instead of system registers, and use that as a precondition to enable GICv2 compatibility in KVM. Note that the detection happens on a single CPU. If the firmware is lying *and* that the CPUs are asymetric, all hope is lost anyway. Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20210305185254.3730990-8-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()Marc Zyngier4-7/+14
As we are about to report a bit more information to the rest of the kernel, rename __vgic_v3_get_ich_vtr_el2() to the more explicit __vgic_v3_get_gic_config(). No functional change. Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20210305185254.3730990-7-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is availableMarc Zyngier2-3/+9
When running under a nesting hypervisor, it isn't guaranteed that the virtual HW will include a PMU. In which case, let's not try to access the PMU registers in the world switch, as that'd be deadly. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210209114844.3278746-3-maz@kernel.org Message-Id: <20210305185254.3730990-6-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static keyMarc Zyngier2-10/+10
We currently find out about the presence of a HW PMU (or the handling of that PMU by perf, which amounts to the same thing) in a fairly roundabout way, by checking the number of counters available to perf. That's good enough for now, but we will soon need to find about about that on paths where perf is out of reach (in the world switch). Instead, let's turn kvm_arm_support_pmu_v3() into a static key. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org Message-Id: <20210305185254.3730990-5-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Fix nVHE hyp panic host context restoreAndrew Scull3-10/+11
When panicking from the nVHE hyp and restoring the host context, x29 is expected to hold a pointer to the host context. This wasn't being done so fix it to make sure there's a valid pointer the host context being used. Rather than passing a boolean indicating whether or not the host context should be restored, instead pass the pointer to the host context. NULL is passed to indicate that no context should be restored. Fixes: a2e102e20fd6 ("KVM: arm64: nVHE: Handle hyp panics") Cc: stable@vger.kernel.org Signed-off-by: Andrew Scull <ascull@google.com> [maz: partial rewrite to fit 5.12-rc1] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210219122406.1337626-1-ascull@google.com Message-Id: <20210305185254.3730990-4-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Avoid corrupting vCPU context register in guest exitWill Deacon1-1/+1
Commit 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context") tracks the currently running vCPU, clearing the pointer to NULL on exit from a guest. Unfortunately, the use of 'set_loaded_vcpu' clobbers x1 to point at the kvm_hyp_ctxt instead of the vCPU context, causing the subsequent RAS code to go off into the weeds when it saves the DISR assuming that the CPU context is embedded in a struct vCPU. Leave x1 alone and use x3 as a temporary register instead when clearing the vCPU on the guest exit path. Cc: Marc Zyngier <maz@kernel.org> Cc: Andrew Scull <ascull@google.com> Cc: <stable@vger.kernel.org> Fixes: 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context") Suggested-by: Quentin Perret <qperret@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210226181211.14542-1-will@kernel.org Message-Id: <20210305185254.3730990-3-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: nvhe: Save the SPE context earlySuzuki K Poulose3-3/+25
The nVHE KVM hyp drains and disables the SPE buffer, before entering the guest, as the EL1&0 translation regime is going to be loaded with that of the guest. But this operation is performed way too late, because : - The owning translation regime of the SPE buffer is transferred to EL2. (MDCR_EL2_E2PB == 0) - The guest Stage1 is loaded. Thus the flush could use the host EL1 virtual address, but use the EL2 translations instead of host EL1, for writing out any cached data. Fix this by moving the SPE buffer handling early enough. The restore path is doing the right thing. Fixes: 014c4c77aad7 ("KVM: arm64: Improve debug register save/restore flow") Cc: stable@vger.kernel.org Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210302120345.3102874-1-suzuki.poulose@arm.com Message-Id: <20210305185254.3730990-2-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds6-526/+4
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-26Merge tag 'arm64-fixes' of ↵Linus Torvalds10-25/+42
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The big one is a fix for the VHE enabling path during early boot, where the code enabling the MMU wasn't necessarily in the identity map of the new page-tables, resulting in a consistent crash with 64k pages. In fixing that, we noticed some missing barriers too, so we added those for the sake of architectural compliance. Other than that, just the usual merge window trickle. There'll be more to come, too. Summary: - Fix lockdep false alarm on resume-from-cpuidle path - Fix memory leak in kexec_file - Fix module linker script to work with GDB - Fix error code when trying to use uprobes with AArch32 instructions - Fix late VHE enabling with 64k pages - Add missing ISBs after TLB invalidation - Fix seccomp when tracing syscall -1 - Fix stacktrace return code at end of stack - Fix inconsistent whitespace for pointer return values - Fix compiler warnings when building with W=1" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: stacktrace: Report when we reach the end of the stack arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL) arm64: Add missing ISB after invalidating TLB in enter_vhe arm64: Add missing ISB after invalidating TLB in __primary_switch arm64: VHE: Enable EL2 MMU from the idmap KVM: arm64: make the hyp vector table entries local arm64/mm: Fixed some coding style issues arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing kexec: move machine_kexec_post_load() to public interface arm64 module: set plt* section addresses to 0x0 arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
2021-02-26arm64: kasan: simplify and inline MTE functionsAndrey Konovalov7-73/+60
This change provides a simpler implementation of mte_get_mem_tag(), mte_get_random_tag(), and mte_set_mem_tag_range(). Simplifications include removing system_supports_mte() checks as these functions are onlye called from KASAN runtime that had already checked system_supports_mte(). Besides that, size and address alignment checks are removed from mte_set_mem_tag_range(), as KASAN now does those. This change also moves these functions into the asm/mte-kasan.h header and implements mte_set_mem_tag_range() via inline assembly to avoid unnecessary functions calls. [vincenzo.frascino@arm.com: fix warning in mte_get_random_tag()] Link: https://lkml.kernel.org/r/20210211152208.23811-1-vincenzo.frascino@arm.com Link: https://lkml.kernel.org/r/a26121b294fdf76e369cb7a74351d1c03a908930.1612546384.git.andreyknvl@google.com Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: add test suiteMarco Elver1-1/+1
Add KFENCE test suite, testing various error detection scenarios. Makes use of KUnit for test organization. Since KFENCE's interface to obtain error reports is via the console, the test verifies that KFENCE outputs expected reports to the console. [elver@google.com: fix typo in test] Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com [elver@google.com: show access type in report] Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: use pt_regs to generate stack trace on faultsMarco Elver2-3/+1
Instead of removing the fault handling portion of the stack trace based on the fault handler's name, just use struct pt_regs directly. Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it through to kfence_report_error() for out-of-bounds, use-after-free, or invalid access errors, where pt_regs is used to generate the stack trace. If the kernel is a DEBUG_KERNEL, also show registers for more information. Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26arm64, kfence: enable KFENCE for ARM64Marco Elver4-1/+36
Add architecture specific implementation details for KFENCE and enable KFENCE for the arm64 architecture. In particular, this implements the required interface in <asm/kfence.h>. KFENCE requires that attributes for pages from its memory pool can individually be set. Therefore, force the entire linear map to be mapped at page granularity. Doing so may result in extra memory allocated for page tables in case rodata=full is not set; however, currently CONFIG_RODATA_FULL_DEFAULT_ENABLED=y is the default, and the common case is therefore not affected by this change. [elver@google.com: add missing copyright and description header] Link: https://lkml.kernel.org/r/20210118092159.145934-3-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-4-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26arm64/mm: define arch_get_mappable_range()Anshuman Khandual1-8/+7
This overrides arch_get_mappable_range() on arm64 platform which will be used with recently added generic framework. It drops inside_linear_region() and subsequent check in arch_add_memory() which are no longer required. It also adds a VM_BUG_ON() check that would ensure that mhp_range_allowed() has already been called. Link: https://lkml.kernel.org/r/1612149902-7867-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: teawater <teawaterz@linux.alibaba.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 19:02:54 +0300