| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, when KASLR is in effect, we set up the kernel virtual address
space twice: the first time, the KASLR seed is looked up in the device
tree, and the kernel virtual mapping is torn down and recreated again,
after which the relocations are applied a second time. The latter step
means that statically initialized global pointer variables will be reset
to their initial values, and to ensure that BSS variables are not set to
values based on the initial translation, they are cleared again as well.
All of this is needed because we need the command line (taken from the
DT) to tell us whether or not to randomize the virtual address space
before entering the kernel proper. However, this code has expanded
little by little and now creates global state unrelated to the virtual
randomization of the kernel before the mapping is torn down and set up
again, and the BSS cleared for a second time. This has created some
issues in the past, and it would be better to avoid this little dance if
possible.
So instead, let's use the temporary mapping of the device tree, and
execute the bare minimum of code to decide whether or not KASLR should
be enabled, and what the seed is. Only then, create the virtual kernel
mapping, clear BSS, etc and proceed as normal. This avoids the issues
around inconsistent global state due to BSS being cleared twice, and is
generally more maintainable, as it permits us to defer all the remaining
DT parsing and KASLR initialization to a later time.
This means the relocation fixup code runs only a single time as well,
allowing us to simplify the RELR handling code too, which is not
idempotent and was therefore required to keep track of the offset that
was applied the first time around.
Note that this means we have to clone a pair of FDT library objects, so
that we can control how they are built - we need the stack protector
and other instrumentation disabled so that the code can tolerate being
called this early. Note that only the kernel page tables and the
temporary stack are mapped read-write at this point, which ensures that
the early code does not modify any global state inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-21-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The early KASLR init code runs extremely early, and anything that could
be deferred until later should be. So let's defer the randomization of
the module region until much later - this also simplifies the
arithmetic, given that we no longer have to reason about the link time
vs load time placement of the core kernel explicitly. Also get rid of
the global status variable, and infer the status reported by the
diagnostic print from other KASLR related context.
While at it, get rid of the special case for KASAN without
KASAN_VMALLOC, which never occurs in practice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-20-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some early boot code runs before the virtual placement of the kernel is
finalized, and we used to go back to the very start and recreate the ID
map along with the page tables describing the virtual kernel mapping,
and this involved setting some global variables with the caches off.
In order to ensure that global state created by the KASLR code is not
corrupted by the cache invalidation that occurs in that case, we needed
to clean those global variables to the PoC explicitly.
This is no longer needed now that the ID map is created only once (and
the associated global variable updates are no longer repeated). So drop
the cache maintenance that is no longer necessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-9-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Obviously kaslr is setting the module region to 2GB rather than 4GB since
commit b2eed9b588112 ("arm64/kernel: kaslr: reduce module randomization
range to 2 GB"). So fix the size of region in Kconfig.
On the other hand, even though RANDOMIZE_MODULE_REGION_FULL is not set,
module_alloc() can fall back to a 2GB window if ARM64_MODULE_PLTS is set.
In this case, veneers are still needed. !RANDOMIZE_MODULE_REGION_FULL
doesn't necessarily mean veneers are not needed.
So fix the doc to be more precise to avoid any confusion to the readers
of the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210730125131.13724-1-song.bao.hua@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although naming across the codebase isn't that consistent, it
tends to follow certain patterns. Moreover, the term "flush"
isn't defined in the Arm Architecture reference manual, and might
be interpreted to mean clean, invalidate, or both for a cache.
Rename arm64-internal functions to make the naming internally
consistent, as well as making it consistent with the Arm ARM, by
specifying whether it applies to the instruction, data, or both
caches, whether the operation is a clean, invalidate, or both.
Also specify which point the operation applies to, i.e., to the
point of unification (PoU), coherency (PoC), or persistence
(PoP).
This commit applies the following sed transformation to all files
under arch/arm64:
"s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\
"s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\
"s/\binvalidate_icache_range\b/icache_inval_pou/g;"\
"s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\
"s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\
"s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\
"s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\
"s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\
"s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\
"s/\b__flush_icache_all\b/icache_inval_all_pou/g;"
Note that __clean_dcache_area_poc is deliberately missing a word
boundary check at the beginning in order to match the efistub
symbols in image-vars.h.
Also note that, despite its name, __flush_icache_range operates
on both instruction and data caches. The name change here
reflects that.
No functional change intended.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To be consistent with other functions with similar names and
functionality in cacheflush.h, cache.S, and cachetlb.rst, change
to specify the range in terms of start and end, as opposed to
start and size.
No functional change intended.
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-13-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After KASAN_VMALLOC works in arm64, we can randomize module region
into vmalloc area now.
Test:
VMALLOC area ffffffc010000000 fffffffdf0000000
before the patch:
module_alloc_base/end ffffffc008b80000 ffffffc010000000
after the patch:
module_alloc_base/end ffffffdcf4bed000 ffffffc010000000
And the function that insmod some modules is fine.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210324040522.15548-5-lecopzer.chen@mediatek.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Given that the early cpufeature infrastructure has borrowed quite
a lot of code from the kaslr implementation, let's reimplement
the matching of the "nokaslr" option with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-20-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we want to parse more options very early in the kernel lifetime,
let's always map the FDT early. This is achieved by moving that
code out of kaslr_early_init().
No functional change expected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-13-maz@kernel.org
[will: Ensue KASAN is enabled before running C code]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes
(either related to shadow memory or compiler instrumentation). Expand
those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS.
Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide support for additional kernel command line parameters to be
concatenated onto the end of the command line provided by the
bootloader. Additional parameters are specified in the CONFIG_CMDLINE
option when CONFIG_CMDLINE_EXTEND is selected, matching other
architectures and leveraging existing support in the FDT and EFI stub
code.
Special care must be taken for the arch-specific nokaslr parsing. Search
the bootargs FDT property and the CONFIG_CMDLINE when
CONFIG_CMDLINE_EXTEND is in use.
There are a couple of known use cases for this feature:
1) Switching between stable and development kernel versions, where one
of the versions benefits from additional command line parameters,
such as debugging options.
2) Specifying additional command line parameters, for additional tuning
or debugging, when the bootloader does not offer an interactive mode.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-3-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Don't ask for *the* command line string to search for "nokaslr" in
kaslr_early_init(). Instead, tell a helper function to search all the
appropriate command line strings for "nokaslr" and return the result.
This paves the way for searching multiple command line strings without
having to concatenate the strings in early init.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-2-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 585524081ecd ("random: random.h should include archrandom.h, not
the other way around") tries to fix a problem with recursive inclusion
of linux/random.h and arch/archrandom.h for arm64. Unfortunately, this
results in the following compile error if ARCH_RANDOM is disabled.
arch/arm64/kernel/kaslr.c: In function 'kaslr_early_init':
arch/arm64/kernel/kaslr.c:128:6: error: implicit declaration of function '__early_cpu_has_rndr'; did you mean '__early_pfn_to_nid'? [-Werror=implicit-function-declaration]
if (__early_cpu_has_rndr()) {
^~~~~~~~~~~~~~~~~~~~
__early_pfn_to_nid
arch/arm64/kernel/kaslr.c:131:7: error: implicit declaration of function '__arm64_rndr' [-Werror=implicit-function-declaration]
if (__arm64_rndr(&raw))
^~~~~~~~~~~~
The problem is that arch/archrandom.h is only included from
linux/random.h if ARCH_RANDOM is enabled. If not, __arm64_rndr() and
__early_cpu_has_rndr() are undeclared, causing the problem.
Use arch_get_random_seed_long_early() instead of arm64 specific
functions to solve the problem.
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 585524081ecd ("random: random.h should include archrandom.h, not the other way around")
Cc: Qian Cai <cai@lca.pw>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is hopefully the final piece of the crazy puzzle with random.h
dependencies.
And by "hopefully" I obviously mean "Linus is a hopeless optimist".
Reported-and-tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The entire asm/archrandom.h header is generically included via
linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the
stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only
visible to KASLR if it explicitly includes the arch-internal header.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When seeding KALSR on a system where we have architecture level random
number generation make use of that entropy, mixing it in with the seed
passed by the bootloader. Since this is run very early in init before
feature detection is complete we open code rather than use archrandom.h.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that we print diagnostics at boot the reason why we do not initialise
KASLR matters. Currently we check for a seed before we check if the user
has explicitly disabled KASLR on the command line which will result in
misleading diagnostics so reverse the order of those checks. We still
parse the seed from the DT early so that if the user has both provided a
seed and disabled KASLR on the command line we still mask the seed on
the command line.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the KASLR code is silent at boot unless it forces on KPTI in
which case a message will be printed for that. This can lead to users
incorrectly believing their system has the feature enabled when it in
fact does not, and if they notice the problem the lack of any
diagnostics makes it harder to understand the problem. Add an initcall
which prints a message showing the status of KASLR during boot to make
the status clear.
This is particularly useful in cases where we don't have a seed. It
seems to be a relatively common error for system integrators and
administrators to enable KASLR in their configuration but not provide
the seed at runtime, often due to seed provisioning breaking at some
later point after it is initially enabled and verified.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core
* for-next/52-bit-kva: (25 commits)
Support for 52-bit virtual addressing in kernel space
* for-next/cpu-topology: (9 commits)
Move CPU topology parsing into core code and add support for ACPI 6.3
* for-next/error-injection: (2 commits)
Support for function error injection via kprobes
* for-next/perf: (8 commits)
Support for i.MX8 DDR PMU and proper SMMUv3 group validation
* for-next/psci-cpuidle: (7 commits)
Move PSCI idle code into a new CPUidle driver
* for-next/rng: (4 commits)
Support for 'rng-seed' property being passed in the devicetree
* for-next/smpboot: (3 commits)
Reduce fragility of secondary CPU bringup in debug configurations
* for-next/tbi: (10 commits)
Introduce new syscall ABI with relaxed requirements for pointer tags
* for-next/tlbi: (6 commits)
Handle spurious page faults arising from kernel space
|
|
Currently in arm64, FDT is mapped to RO before it's passed to
early_init_dt_scan(). However, there might be some codes
(eg. commit "fdt: add support for rng-seed") that need to modify FDT
during init. Map FDT to RO after early fixups are done.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to support 52-bit kernel addresses detectable at boot time, the
kernel needs to know the most conservative VA_BITS possible should it
need to fall back to this quantity due to lack of hardware support.
A new compile time constant VA_BITS_MIN is introduced in this patch and
it is employed in the KASAN end address, KASLR, and EFI stub.
For Arm, if 52-bit VA support is unavailable the fallback is to 48-bits.
In other words: VA_BITS_MIN = min (48, VA_BITS)
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following commit
7290d5809571 ("module: use relative references for __ksymtab entries")
updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).
Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.
Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).
Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.
So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are
clean to the PoC") added cache maintenance to ensure that global
variables set by the kaslr init routine are not wiped clean due to
cache invalidation occurring during the second round of page table
creation.
However, if kaslr_early_init() exits early with no randomization
being applied (either due to the lack of a seed, or because the user
has disabled kaslr explicitly), no cache maintenance is performed,
leading to the same issue we attempted to fix earlier, as far as the
module_alloc_base variable is concerned.
Note that module_alloc_base cannot be initialized statically, because
that would cause it to be subject to a R_AARCH64_RELATIVE relocation,
causing it to be overwritten by the second round of KASLR relocation
processing.
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
kaslr_early_init() is called with the kernel mapped at its
link time offset, and if it returns with a non-zero offset,
the kernel is unmapped and remapped again at the randomized
offset.
During its execution, kaslr_early_init() also randomizes the
base of the module region and of the linear mapping of DRAM,
and sets two variables accordingly. However, since these
variables are assigned with the caches on, they may get lost
during the cache maintenance that occurs when unmapping and
remapping the kernel, so ensure that these values are cleaned
to the PoC.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
We currently have to rely on the GCC large code model for KASLR for
two distinct but related reasons:
- if we enable full randomization, modules will be loaded very far away
from the core kernel, where they are out of range for ADRP instructions,
- even without full randomization, the fact that the 128 MB module region
is now no longer fully reserved for kernel modules means that there is
a very low likelihood that the normal bottom-up allocation of other
vmalloc regions may collide, and use up the range for other things.
Large model code is suboptimal, given that each symbol reference involves
a literal load that goes through the D-cache, reducing cache utilization.
But more importantly, literals are not instructions but part of .text
nonetheless, and hence mapped with executable permissions.
So let's get rid of our dependency on the large model for KASLR, by:
- reducing the full randomization range to 4 GB, thereby ensuring that
ADRP references between modules and the kernel are always in range,
- reduce the spillover range to 4 GB as well, so that we fallback to a
region that is still guaranteed to be in range
- move the randomization window of the core kernel to the middle of the
VMALLOC space
Note that KASAN always uses the module region outside of the vmalloc space,
so keep the kernel close to that if KASAN is enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that the early kernel mapping logic can tolerate placements of
Image that cross swapper table boundaries, we can remove the logic
that adjusts the offset if the dice roll produced an offset that
puts the kernel right on top of one.
Reviewed-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
With 16KB pages and a kernel Image larger than 16MB, the current
kaslr_early_init() logic for avoiding mappings across swapper table
boundaries fails since increasing the offset by kimg_sz just moves the
problem to the next boundary.
This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the
Image crosses a PMD_SIZE boundary.
Fixes: afd0e5a87670 ("arm64: kaslr: Fix up the kernel image alignment")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In the KASLR setup routine, we ensure that the early virtual mapping
of the kernel image does not cover more than a single table entry at
the level above the swapper block level, so that the assembler routines
involved in setting up this mapping can remain simple.
In this calculation we add the proposed KASLR offset to the values of
the _text and _end markers, and reject it if they would end up falling
in different swapper table sized windows.
However, when taking the addresses of _text and _end, the modulo offset
(the physical displacement modulo 2 MB) is already accounted for, and
so adding it again results in incorrect results. So disregard the modulo
offset from the calculation.
Fixes: 08cdac619c81 ("arm64: relocatable: deal with physically misaligned ...")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In the flattened device tree format, all integer properties are
in big-endian order.
Here the property "kaslr-seed" is read from the fdt and then
correctly converted to native order (via fdt64_to_cpu()) but the
pointer used for this is not annotated as being for big-endian.
Fix this by declaring the pointer as fdt64_t instead of u64
(fdt64_t being itself typedefed to __be64).
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If kernel image extends across alignment boundary, existing
code increases the KASLR offset by size of kernel image. The
offset is masked after resizing. There are cases, where after
masking, we may still have kernel image extending across
boundary. This eventually results in only 2MB block getting
mapped while creating the page tables. This results in data aborts
while accessing unmapped regions during second relocation (with
kaslr offset) in __primary_switch. To fix this problem, round up the
kernel image size, by swapper block size, before adding it for
correction.
For example consider below case, where kernel image still crosses
1GB alignment boundary, after masking the offset, which is fixed
by rounding up kernel image size.
SWAPPER_TABLE_SHIFT = 30
Swapper using section maps with section size 2MB.
CONFIG_PGTABLE_LEVELS = 3
VA_BITS = 39
_text : 0xffffff8008080000
_end : 0xffffff800aa1b000
offset : 0x1f35600000
mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1)
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset after existing correction (before mask) = 0x1f37f9b000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset (after mask) = 0x1f37e00000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
new offset w/ rounding up = 0x1f38000000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
These objects are set during initialization, thereafter are read only.
Previously I only want to mark vdso_pages, vdso_spec, vectors_page and
cpu_ops as __read_mostly from performance point of view. Then inspired
by Kees's patch[1] to apply more __ro_after_init for arm, I think it's
better to mark them as __ro_after_init. What's more, I find some more
objects are also read only after init. So apply __ro_after_init to all
of them.
This patch also removes global vdso_pagelist and tries to clean up
vdso_spec[] assignment code.
[1] http://www.spinics.net/lists/arm-kernel/msg523188.html
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When booting a relocatable kernel image, there is no practical reason
to refuse an image whose load address is not exactly TEXT_OFFSET bytes
above a 2 MB aligned base address, as long as the physical and virtual
misalignment with respect to the swapper block size are equal, and are
both aligned to THREAD_SIZE.
Since the virtual misalignment is under our control when we first enter
the kernel proper, we can simply choose its value to be equal to the
physical misalignment.
So treat the misalignment of the physical load address as the initial
KASLR offset, and fix up the remaining code to deal with that.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), and entropy has been
provided by the bootloader, randomize the placement of RAM inside the
linear region if sufficient space is available. For instance, on a 4KB
granule/3 levels kernel, the linear region is 256 GB in size, and we can
choose any 1 GB aligned offset that is far enough from the top of the
address space to fit the distance between the start of the lowest memblock
and the top of the highest memblock.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This adds support for KASLR is implemented, based on entropy provided by
the bootloader in the /chosen/kaslr-seed DT property. Depending on the size
of the address space (VA_BITS) and the page size, the entropy in the
virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all
4 levels), with the sidenote that displacements that result in the kernel
image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB
granule kernels, respectively) are not allowed, and will be rounded up to
an acceptable value.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is
randomized independently from the core kernel. This makes it less likely
that the location of core kernel data structures can be determined by an
adversary, but causes all function calls from modules into the core kernel
to be resolved via entries in the module PLTs.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is
randomized by choosing a page aligned 128 MB region inside the interval
[_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of
entropy (depending on page size), independently of the kernel randomization,
but still guarantees that modules are within the range of relative branch
and jump instructions (with the caveat that, since the module region is
shared with other uses of the vmalloc area, modules may need to be loaded
further away if the module region is exhausted)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
