summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2025-03-19Merge tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann6-6/+1238
soc/dt arm64: ZynqMP DT changes for 6.15 - Align clock nodes with DT binding - Add the first VN-X Versal NET board - Move constants out of DT bindings * tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx: dt-bindings: xilinx: Deprecate header with firmware constants arm64: zynqmp: Use DT header for firmware constants arm64: versal-net: Add description for b2197-00 revA board dt-bindings: soc: Add new VN-X board description based on Versal NET arm64: zynqmp: add clock-output-names property in clock nodes Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'sunxi-dt-for-6.15' of ↵Arnd Bergmann5-1/+143
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.15 - New board support: NetCube Systems Kumquat - Enable USB and LED on Anbernic RG35XX - Fix reboot GPIO detection logic on Anbernic RG35XX - Disable (non-existent) battery thermistor on Anbernic RG35XX - Add CPU OPP table for A100 * tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a100: Add CPU Operating Performance Points table arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery arm64: dts: allwinner: h700: Add USB Host for RG35XX-H arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX ARM: dts: sunxi: add support for NetCube Systems Kumquat ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board dt-bindings: vendor-prefixes: Add NetCube Systems Austria name Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'stm32-dt-for-v6.15-1' of ↵Arnd Bergmann14-1/+1782
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.15, round 1 Highlights: ---------- - MPU: - STM32MP13: - Add thermal support. - Add Priva E-Measuringbox board support based on sTM32MP133C SoC. It embeds Ethernet RMII with TI phy, SDCard, eMMC and some sensors. - Add support for DHCOR SoM and DHSBC rev.200 board: TPM interrupts and gpio reset + LDO2/LDO5 support. - STMP32MP15: - Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP. It contains eMMC for storage, a gigabit Ethernet, a CAN bus and a RS485 transceiver. - Add Plymovent AQM board based on STM32MP151 SoC. It embeds: ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S), Storage (SDCard, eMMC). - STM32MP25: - Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP23 SoC and add STM32MP235F Discovery board: It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP21 SoC and STM32MP215F discovery board: It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo, LCD 18bit connector, CSI camera connector, ... * tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits) arm64: dts: st: add stm32mp215f-dk board support dt-bindings: stm32: document stm32mp215f-dk board arm64: dts: st: introduce stm32mp21 SoCs family arm64: dts: st: add stm32mp235f-dk board support dt-bindings: stm32: document stm32mp235f-dk board arm64: dts: st: introduce stm32mp23 SoCs family dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family arm64: dts: st: add stm32mp257f-dk board support dt-bindings: stm32: document stm32mp257f-dk board ARM: dts: stm32: Add Plymovent AQM devicetree ARM: dts: stm32: Add pinmux groups for Plymovent AQM board dt-bindings: arm: stm32: Add Plymovent AQM board dt-bindings: sound: convert ICS-43432 binding to YAML ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2 ARM: dts: stm32: add usr3 LED node to stm32f769-disco ARM: dts: stm32: rename LEDs nodes for stm32f769-disco ARM: dts: stm32: add push button to stm32f746 Discovery board ARM: dts: stm32: add led to stm32f746 Discovery board ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-18arm64: dts: qcom: x1e001de-devkit: fix USB retimer reset polarityJohan Hovold1-3/+3
The ps8830 retimer reset is active low. Fix up the retimer nodes which were based on an early version of the driver which inverted the polarity. Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support") Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20250318074907.13903-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-18arm64: dts: hi3660: Add property for fixing CPUIdleLeo Yan1-0/+8
During CPU low power modes, ETM components will lose their context. Add the "arm,coresight-loses-context-with-cpu" property to ETM nodes to save and restore ETM context for CPU idle states. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2025-03-17arm64: dts: qcom: qcs8300: Add RPMh sleep statsMaulik Shah1-0/+5
Add RPMh stats to read low power statistics for various subsystem and SoC sleep modes. Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250317-add_qcom_stats-v1-1-016ae05ac4b0@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: dts: qcom: ipq9574: Add nsscc nodeDevi Priya1-0/+29
Add a node for the nss clock controller found on ipq9574 based devices. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20250313110359.242491-6-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: dts: qcom: x1e80100: enable rtcJohan Hovold1-2/+1
On many Qualcomm platforms the PMIC RTC control and time registers are read-only so that the RTC time can not be updated. Instead an offset needs be stored in some machine-specific non-volatile memory, which a driver can take into account. On X1E based Windows on Arm machines the offset is stored in a Qualcomm specific UEFI variable. Unlike on previous platforms the alarm registers are also unaccessible on X1E as they are owned by the ADSP. Assume all X1E machines use similar firmware and enable the RTC in the PMIC dtsi for now. Based on a patch by Jonathan Marek. [1] Link: https://lore.kernel.org/r/20241015004945.3676-4-jonathan@marek.ca # [1] Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Sebastian Reichel <sre@kernel.org> # Lenovo T14s Gen6 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250219134118.31017-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: dts: qcom: sc8280xp-x13s: switch to uefi rtc offsetJohan Hovold1-11/+0
On many Qualcomm platforms the PMIC RTC control and time registers are read-only so that the RTC time can not be updated. Instead an offset needs be stored in some machine-specific non-volatile memory, which a driver can take into account. Switch to using the Qualcomm specific UEFI variable that is used by the UEFI firmware (and Windows) to store the RTC offset. This specifically means that the RTC time will be synchronised between the UEFI firmware setup (or UEFI shell), Windows and Linux. Note however that Windows stores the RTC time in local time by default, while Linux typically uses UTC (i.e. as on X86). Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250219134118.31017-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: dts: qcom: sm8650: Fix domain-idle-state for CPU2Luca Weiss1-1/+1
On SM8650 the CPUs 0-1 are "silver" (Cortex-A520), CPU 2-6 are "gold" (Cortex-A720) and CPU 7 is "gold-plus" (Cortex-X4). So reference the correct "gold" idle-state for CPU core 2. Fixes: d2350377997f ("arm64: dts: qcom: add initial SM8650 dtsi") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250314-sm8650-cpu2-sleep-v1-1-31d5c7c87a5d@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: dts: qcom: sa8775p: Add LMH interrupts for cpufreq_hw nodeJagadeesh Kona1-0/+4
Add LMH interrupts for cpufreq_hw node to indicate if there is any thermal throttle. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250117-sa8775p-lmh-interrupts-v1-1-bae549f0bfe8@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: qcs615: remove disallowed property in spmi bus nodeTingguo Cheng1-1/+0
Remove the unevaluated 'cell-index' property from qcs615-ride.dtb spmi@c440000 to fix the Devicetree validation error reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202412272210.GpGmqcPC-lkp@intel.com/ Fixes: 27554e2bef4d ("arm64: dts: qcom: qcs615: Adds SPMI support") Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250117-fix-kernel-test-robot-unexpected-property-issue-v2-1-0b68cf481249@quicinc.com [bjorn: Fixes commit message wording about LKP] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-vivobook-s15: Enable micro-sd card readerMaud Spierings1-0/+39
The asus vivobook s15 has a micro-sd card reader attached to usb_2. Enable usb_2 to enable this reader. Signed-off-by: Maud Spierings <maud_spierings@hotmail.com> Link: https://lore.kernel.org/r/20250119-usb_a_micro_sd-v1-2-01eb7502ae05@hotmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A portsMaud Spierings1-1/+102
The asus vivobook has 2 USB type A ports on the right side, enable them Signed-off-by: Maud Spierings <maud_spierings@hotmail.com> Link: https://lore.kernel.org/r/20250119-usb_a_micro_sd-v1-1-01eb7502ae05@hotmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: ipq5424: enable GPIO based LEDs and ButtonsManikanta Mylavarapu1-0/+43
Add support for wlan-2g LED on GPIO 42 and wps buttons on GPIO 19. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250120064508.2722341-1-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0Nicolas Frattaroli1-2/+1
The GPIO3 A4 pin on the ArmSoM Sige5 is routed to the 40-pin GPIO header. This pin can serve a variety of functions, including ones of questionable use to us on a GPIO header such as the 25MHz clock of the ethernet controller. Unfortunately, this is the precise function that it is being claimed for by the gmac0 node in the Sige5 board dts, meaning it can't be used for anything else despite serving no useful function in this role. Since it goes through a RS0108 bidirectional voltage level translator with a maximum data rate of 24Mbit/s in push-pull mode and 2Mbit/s data rate in open-drain mode, it's doubtful as to whether the 25MHz clock signal would even survive to the actual user-accessible pin it terminates in. Remove it to leave the pin for users to play with. It's infinitely more useful as a GPIO or even as a PWM. Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board") Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250314-rk3576-sige5-eth-clk-begone-v1-1-2858338fc555@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-15arm64: dts: marvell: Use preferred node names for "simple-bus"Rob Herring (Arm)7-10/+8
The "simple-bus" binding has preferred node names such as "bus", ".*-bus", or "soc". Rename the Marvell platforms to use these names. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-15arm64: dts: marvell: Drop unused CP11X_TYPE defineRob Herring (Arm)2-8/+0
The CP11X_TYPE define is not used anywhere, remove it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-15arm64: dts: marvell: Move arch timer and pmu nodes to top-levelRob Herring (Arm)2-23/+24
The Arm arch timer and PMU are not memory-mapped peripherals, and therefore should not be under a "simple-bus" node. Move them to the top-level like other platforms. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-15arm64: dts: qcom: sm7325-nothing-spacewar: Enable panel and GPUEugene Lepshy1-2/+49
Enable the Adreno GPU and configure the Visionox RM692E5 panel. Signed-off-by: Eugene Lepshy <fekz115@gmail.com> Co-developed-by: Danila Tikhonov <danila@jiaxyga.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250217222431.82522-5-danila@jiaxyga.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanineVikram Sharma2-0/+93
The Vision Mezzanine for the Qualcomm RB3 Gen 2 ships with an imx577 camera sensor. Enable IMX577 on the vision mezzanine. An example media-ctl pipeline for the imx577 is: media-ctl --reset media-ctl -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]' media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250208225143.2868279-3-quic_vikramsa@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: sc7280: Add support for camssVikram Sharma1-0/+178
Add changes to support the camera subsystem on the SC7280. Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250208225143.2868279-2-quic_vikramsa@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: ipq9574: Fix USB vdd infoVaradarajan Narayanan1-2/+9
USB phys in ipq9574 use the 'L5' regulator. The commit ec4f047679d5 ("arm64: dts: qcom: ipq9574: Enable USB") incorrectly specified it as 'L2'. Because of this when the phy module turns off/on its regulators, the wrong regulator is turned off/on resulting in 2 issues, namely the correct regulator related to the USB phy is not turned off/on and the module powered by the incorrect regulator is affected. Fixes: ec4f047679d5 ("arm64: dts: qcom: ipq9574: Enable USB") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250207073545.1768990-2-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: qcm6490-idp: Update protected clocks listTaniya Das1-0/+21
Certain clocks are not accessible on QCM6490-IDP board, thus mark them as protected. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20250206-protected_clock_qcm6490-v1-1-5923e8c47ab5@quicinc.com [bjorn: Fix node sort order] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15Merge tag 'ti-k3-dt-for-v6.15' of ↵Arnd Bergmann23-72/+488
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.15 Generic Fixups/Cleanups: SoC Specific features and Fixes: AM62Ax: Enable MCU domain pinctrl node J784S4/J742S4: GICD reg size fixes Serdes lane ctrl reg mux mask fix AM62P/J722s: Wakeup UART0 sysc updates for system wakeup pinctrl node fixes drop pinctrl-single,gpio-ranges BCDMA CSI-RX support Audio REFCLKx output support Board Specific: J784S4: EVM: Cleanup duplicate gpio-hogs J722S: TypeC port mux selection fix AM62Ax SK: boot-phase tag to support USB bootmode RTC support Aliases for wakeup and MCU serial UARTs AM62P SK: boot-phase tag to support USB bootmode USB wakeup support Aliases for wakeup and MCU serial UARTs AM62: verdin-dahila: microphone support SK: Aliases for wakeup and MCU serial UARTs BeaglePlay: reserved CMA region for Multimedia applications J721e: SK/EVM: boot-phase tags for Serdes for DFU boot Phytech board updates: Boot-phase tag updates for AM64/AM62/AM62A boards DTS coding style cleanups RTOS IPC reserved-memory additions DT overlay for X27 Connectors on AM64 SOMs J721S2 SOM: Add flash partitions * tag 'ti-k3-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (32 commits) arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags arm64: dts: ti: k3-j722s-evm: Add camera peripherals arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides arm64: dts: ti: k3-j722s: fix pinctrl settings arm64: dts: ti: k3-am62p: fix pinctrl settings arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory arm64: dts: ti: k3-am62p5-sk: Add serial alias arm64: dts: ti: k3-am62a7-sk: Add serial alias arm64: dts: ti: k3-am62x-sk-common: Add serial aliases arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA ... Link: https://lore.kernel.org/r/5d612c0e-4cd4-469a-9856-dd4552d74412@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-15Merge tag 'imx-dt64-6.15' of ↵Arnd Bergmann59-187/+3397
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.15: - New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10 - A series from Ahmad Fatoum and Oleksij Rempel to flesh out imx8mp-skov device trees, correcting PMIC board limits, adding display pipeline, configuring uart1 for RS485, etc. - A bunch of changes from Alexander Stein, adding PCIe support for mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply for spi-nor, etc. - A series from Chancel Liu to complete WM8960 power supplies for NXP i.MX8 based boards - A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek, adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc. - A number of changes from Frieder Schrempf to support reading SD_VSEL signal for imx8m-kontron devices, fix SD card IO voltage control for imx93-kontron - A series from Teresa Remmet to improve imx8mm-phycore support, keeping LDO3 on in suspend, adding overlays for devices without Ethernet PHY, SPI NOR Flash, etc. - A couple of changes from Xu Yang to enable usb3 support for imx95-19x19-evk board - Other random improvements and cleanups on various boards * tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits) arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block arm64: dts: imx93: add ddr edac support arm64: dts: imx95: add ref clock for pcie nodes arm64: dts: mba8xx: Remove invalid property disable-gpio arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe arm64: dts: im8mq-librem5: move dwc3 usb port under ports arm64: dts: mba8mx: change sound card model name arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3 arm64: dts: imx95: Add imx95-15x15-evk support arm64: dts: imx95: Add i3c1 and i3c2 arm64: dts: imx95: Add #io-channel-cells = <1> for adc node arm64: dts: imx8mp-skov: support new 7" panel board arm64: dts: imx8mp-skov: add revC BD500 board arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI arm64: dts: imx8mp-skov: add basic board as fallback arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode ... Link: https://lore.kernel.org/r/20250312074005.663165-5-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-15arm64: dts: qcom: x1e78100-t14s: fix missing HID suppliesJohan Hovold1-0/+43
Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable@vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts") Cc: stable@vger.kernel.org # 6.8 Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-8-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-onJohan Hovold1-1/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree") Cc: stable@vger.kernel.org # 6.11 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: stable@vger.kernel.org # 6.14 Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Note that these supplies currently have no consumers described in mainline. Fixes: f5b788d0e8cd ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345") Cc: stable@vger.kernel.org # 6.13 Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-5-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows") Cc: stable@vger.kernel.org # 6.14 Cc: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable@vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-onJohan Hovold1-0/+2
The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Cc: stable@vger.kernel.org # 6.8 Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-15arm64: dts: qcom: sc8280xp-crd: add support for volume-up keyJohan Hovold1-0/+22
Add support for the keypad volume-up key on the debug extension board. This is useful to have when testing PMIC interrupt handling, and the key can also be used to wake up from deep suspend states (CX shutdown). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250307171036.7276-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14arm64: dts: rockchip: Fix PWM pinctrl namesYao Zi4-5/+5
These Rockchip boards assign "active" as the pinctrl name for PWM controllers, which has never been supported in mainline Rockchip PWM driver. It seems the name used by downstream kernel is accidentally brought into maineline. Let's fix them. Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc") Fixes: 964ed0807b5f ("arm64: dts: rockchip: add rk3318 A95X Z2 board") Fixes: e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4") Fixes: 3f5d336d64d6 ("arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B") Signed-off-by: Yao Zi <ziyao@disroot.org> Link: https://lore.kernel.org/r/20250310140916.14384-2-ziyao@disroot.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-14arm64: dts: rockchip: fix RK3576 SCMI clock IDsNicolas Frattaroli1-9/+9
Downstream Linux, and consequently both downstream and mainline TF-A, all use a different set of clock IDs from mainline Linux. If we want to fiddle with these clocks through SCMI, we'll need to use the right IDs. If we don't do this we'll end up changing unrelated clocks all over the place. Change the clock IDs to the newly added SCMI clock IDs for the CPU and GPU nodes, which are currently the only ones using SCMI clocks. This fixes the terrible GPU performance, as we weren't reclocking it properly. Fixes: 57b1ce903966 ("arm64: dts: rockchip: Add rk3576 SoC base DT") Reported-by: Jonas Karlman <jonas@kwiboo.se> Closes: https://libera.irclog.whitequark.org/linux-rockchip/2025-03-09#1741542223-1741542875; Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250310-rk3576-scmi-clocks-v1-2-e165deb034e8@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-14arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 MaxJianfeng Liu1-1/+1
According to the schematic, pcie reset gpio is GPIO3_D4, not GPIO4_D4. Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board") Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250311141245.2719796-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-14Merge tag 'samsung-dt64-6.15' of ↵Arnd Bergmann10-341/+1600
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.15 1. Google GS101: - Disable GSA core pinctrl because its registers are not available for normal world. - Add APM (Active Power Management) mailbox and the ACPM firmware nodes. - Add new boards: Google Pixel 6 Pro (Raven). - Enable framebuffer and reboot-mode. 2. Exynos990: - Add PERIS clock controller, MCT timer 3. Exynos8895: - Define all remaining serial engine (USI) and syscon nodes, add MMC. - Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte). 4. ExynosAutov920: Add UFS and CPU cache information. 5. Various cleanups. This includes two topic branches with DT bindings, which might be shared with other trees depending on needs: 1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller header constants. 2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines header constants rework. * tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits) arm64: dts: tesla: Change labels to lower-case arm64: dts: exynos: gs101: Change labels to lower-case arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC arm64: dts: exynosautov920: add CPU cache information arm64: dts: exynos: gs101: add ACPM protocol node arm64: dts: exynos: gs101: add AP to APM mailbox node arm64: dts: exynos: gs101: add SRAM node arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0) arm64: dts: exynos: gs101: align poweroff writes with downstream arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes arm64: dts: exynos8895: Rename PMU nodes to fixup sorting arm64: dts: exynos8895-dreamlte: enable support for the touchscreen arm64: dts: exynos8895-dreamlte: enable support for microSD storage arm64: dts: exynos8895: add a node for mmc arm64: dts: exynos8895: define all usi nodes arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1 arm64: dts: exynos990: Rename and sort PMU nodes arm64: dts: exynos990: Add CMU_PERIS and MCT nodes dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi dt-bindings: clock: exynos990: Add CMU_PERIS block ... Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'asahi-soc-dt-6.15-v3' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann14-0/+239
soc/dt Apple SoC DT updates for 6.15, final batch: - Added touchbar screen nodes for M1/M2 platforms - Added backlight nodes for iPhone, iPad and iPod touch * tag 'asahi-soc-dt-6.15-v3' of https://github.com/AsahiLinux/linux: arm64: dts: apple: t8015: Add backlight nodes arm64: dts: apple: t8010: Add backlight nodes arm64: dts: apple: s800-0-3: Add backlight nodes arm64: dts: apple: t7000: Add backlight nodes arm64: dts: apple: s5l8960x: Add backlight nodes arm64: dts: apple: Add touchbar screen nodes Link: https://lore.kernel.org/r/20250309113212.48137-1-sven@svenpeter.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'v6.15-rockchip-dts64-1' of ↵Arnd Bergmann67-67/+6903
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588), Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568) New overlays: Video-adapters for Theobroma boards and one adapter used in hw test scenarios. Interesting bigger changes contain clock support for rk3528; support for the hdmi1 controller as well as hdmi-audio support on both controllers on rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic graphics support and can now do hdmi output. Another big block is that we're now doing overlays way better and are including build-testing for applied overlays to the base dtb - similar to how other arches already do this. Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588 (rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl) And a huge number of board-level improvements and additions. * tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits) arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D arm64: dts: rockchip: Add SFC nodes for rk3576 arm64: dts: rockchip: Add maskrom button to Radxa E20C arm64: dts: rockchip: Add SARADC node for RK3528 arm64: dts: rockchip: Add user button to Radxa E20C arm64: dts: rockchip: Add leds node to Radxa E20C arm64: dts: rockchip: Add HDMI support for rock-4d arm64: dts: rockchip: enable SCMI clk for RK3528 SoC arm64: dts: rockchip: Enable HDMI receiver on rock-5b arm64: dts: rockchip: Add device tree support for HDMI RX Controller arm64: dts: rockchip: Add rk3528 QoS register node dt-bindings: mfd: syscon: Add rk3528 QoS register compatible arm64: dts: rockchip: add MNT Reform 2 laptop dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE) dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10 arm64: dts: rockchip: Enable hdmi display on sige5 arm64: dts: rockchip: Add hdmi for rk3576 arm64: dts: rockchip: Add vop for rk3576 ... Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'tegra-for-6.15-arm64-dt-v2' of ↵Arnd Bergmann5-8/+52
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.15-rc1 This contains a patch to remove an unusable key that was erroneously exposed as well as a fix to support GPUs with a large amount of video memory on IGX Orin. Finally, some additional devices, such as a temperature sensor, are enabled on Jetson TX1, the output voltage of some pins is adjusted and the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO. * tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: p2180: Add TMP451 temperature sensor node arm64: tegra: p2597: Enable TCA9539 as IRQ controllers arm64: tegra: Define pinmuxing for gpio pads on Tegra210 arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator arm64: tegra: Resize aperture for the IGX PCIe C5 slot arm64: tegra: Remove the Orin NX/Nano suspend key Link: https://lore.kernel.org/r/20250307174938.3456275-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14arm64: dts: amd/seattle: Drop undocumented "spi-controller" propertiesRob Herring (Arm)1-2/+0
"spi-controller" is not a documented property nor used anywhere, so drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-4-011c423ba99a@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node namesRob Herring (Arm)3-4/+4
Use preferred node names for bus, mmc, and ethernet. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-3-011c423ba99a@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14arm64: dts: amd/seattle: Move and simplify fixed clocksRob Herring (Arm)3-48/+8
The fixed clocks are not part of "simple-bus", so move them out of the bus to the top-level. In the process, use the preferred node names of "clock-<freq>". There's also little reason to have multiple fixed clocks at the same frequencies, so remove them keeping the labels to minimize the change. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-2-011c423ba99a@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 versionRob Herring (Arm)1-60/+1
AMD Overdrive B1 version is just more peripherals enabled over B0 version. Rework the B1 .dts to use the B0 .dts. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-1-011c423ba99a@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'renesas-dts-for-v6.15-tag2' of ↵Arnd Bergmann2-0/+66
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.15 (take two) - Add GPU support for the RZ/V2H(P) SoC and the RZ/V2H EVK board. * tag 'renesas-dts-for-v6.15-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable Mali-G31 arm64: dts: renesas: r9a09g057: Add Mali-G31 GPU node Link: https://lore.kernel.org/r/cover.1741362039.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'qcom-arm64-fixes-for-6.14' of ↵Arnd Bergmann1-1/+0
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm Arm64 Devicetree fixes for v6.14 Revert the change to marking SDM845 SMMU dma-coherent, as this is reported not to be true. * tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu" Link: https://lore.kernel.org/r/20250310191409.1208520-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14arm64: dts: qcom: x1e80100-crd: Drop duplicate DMIC suppliesStephan Gerhold1-4/+0
The WCD938x codec provides two controls for each of the MIC_BIASn outputs: - "MIC BIASn" enables an internal regulator to generate the output with a configurable voltage (qcom,micbiasN-microvolt). - "VA MIC BIASn" enables "pull-up mode" that bypasses the internal regulator and directly outputs fixed 1.8V from the VDD_PX pin. This is intended for low-power VA (voice activation) use cases. The audio-routing setup for the X1E80100 CRD currently specifies both as power supplies for the DMICs, but only one of them can be active at the same time. In practice, only the internal regulator is used with the current setup because the driver prefers it over pull-up mode. Make this more clear by dropping the redundant routes to the pull-up "VA MIC BIASn" supply. There is no functional difference except that we skip briefly switching to pull-up mode when shutting down the microphone. Fixes: 4442a67eedc1 ("arm64: dts: qcom: x1e80100-crd: add sound card") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-2-0dfd4d9b492c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14arm64: dts: qcom: sc8280xp-x13s: Drop duplicate DMIC suppliesStephan Gerhold1-3/+0
The WCD938x codec provides two controls for each of the MIC_BIASn outputs: - "MIC BIASn" enables an internal regulator to generate the output with a configurable voltage (qcom,micbiasN-microvolt). - "VA MIC BIASn" enables "pull-up mode" that bypasses the internal regulator and directly outputs fixed 1.8V from the VDD_PX pin. This is intended for low-power VA (voice activation) use cases. The audio-routing setup for the ThinkPad X13s currently specifies both as power supplies for the DMICs, but only one of them can be active at the same time. In practice, only the internal regulator is used with the current setup because the driver prefers it over pull-up mode. Make this more clear by dropping the redundant routes to the pull-up "VA MIC BIASn" supply. There is no functional difference except that we skip briefly switching to pull-up mode when shutting down the microphone. Fixes: 2e498f35c385 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 16:32:48 +0300