summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-05-03arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5Jimmy Hon1-0/+94
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI or XHCI mode. Displayport AltMode is not yet supported. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Enable GPU on Orange Pi 5Jimmy Hon1-0/+5
Enable the Mali GPU in the Orange Pi 5 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240425222913.1760-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable GPU on khadas-edge2Muhammed Efe Cetin1-0/+5
Enable the Mali GPU node on Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/20240501142241.98554-1-efectn@6tel.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO boardAnand Moon1-0/+8
Add the proper nodes to activate the USB 3.0 ports on the Edgeble NCM6A-IO board. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute ModuleAnand Moon1-0/+2
On Edgeble Neural Compute Module add system-power-controller property to RK806 pmic so that these chips can power off the device. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add Radxa ROCK 3CChukun Pan2-0/+727
The Radxa ROCK 3C is a development board with the Rockchip RK3566 SoC. It has the following features: - 1/2/4GB LPDDR4 - 1x HDMI Type A - 1x PCIE 2.0 slot - 1x FAN connector - 3.5mm jack with mic - 1GbE RTL8211F Ethernet - 1x USB 3.0, 3x USB 2.0 - 40-pin expansion header - MicroSD card/eMMC socket - 16MB SPI NOR (gd25lq128d) - AP6256 or AIC8800 WiFi/BT Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn [dropped rk809-sound and not specified pmic sound properties] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-HaikouHeiko Stuebner1-0/+58
Apart from the host-only usb3 controller (host2) the rk3588 also provides two dual-role controllers. On the Tiger-Haikou combination these are connected to the lower usb3-host port in host-only mode and the micro-usb3 port for dual-role operation. Add the necessary controllers, phys to the Tiger-Haikou board and enable the usb-id extcon. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-4-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: add usb-id extcon on rk3588 tigerHeiko Stuebner1-0/+15
The Q7 standard specifies a usb-id pin on the connector to distiuish between host and device mode. Model this via the usb-id extcon binding. While the pin is part of the Q7 standard, so part of the module, the extcon stays disabled in the som dtsi and will only be enabled in a baseboard using it. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-3-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: fix comment for upper usb3 portHeiko Stuebner1-3/+3
The comment for the host2_xhci points to the wrong port on the board. The upper usb3 port is the correct one, so fix the comment to prevent confusion. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tigerHeiko Stuebner1-1/+1
The clock-generator of course only produces a 100MHz clock rate, not 1GHz. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240423114635.2637310-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boardsJing Luo9-9/+9
gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them. Note: I haven't had the chance to test them all because I don't own all of these boards (obviously). Please test if it's needed. Signed-off-by: Jing Luo <jing@jing.rocks> Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: Correct the model names for Pine64 boardsDragan Simic8-8/+8
Correct the model names of a few Pine64 boards and devices, according to their official names used on the Pine64 wiki. This ensures consistency between the officially used names and the names in the source code. Cc: Marek Kraus <gamiee@pine64.org> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/06ce014a1dedff11a785fe523056b3b8ffdf21ee.1713832790.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: Add ArmSom Sige7 boardJianfeng Liu2-0/+722
Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16/32GB Memory LPDDR4/LPDDR4x Mali G610MP4 GPU 2× MIPI-CSI Connector 1× MIPI-DSI Connector 1x M.2 Key M (PCIe 3.0 4-lanes) 2x RTL8125 2.5G Ethernet Onboard AP6275P for WIFI6/BT5 32GB/64GB/128GB eMMC MicroSD card slot 1x USB2.0, 1x USB3.0 Type-A, 1x US3.0 Type-C 1x HDMI Output, 1x type-C DP Output Functions work normally: USB2.0 Host USB3.0 Type-A Host M.2 Key M (PCIe 3.0 4-lanes) 2x RTL8125 2.5G Ethernet eMMC MicroSD card More information can be obtained from the following website https://docs.armsom.org/armsom-sige7 Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com> Link: https://lore.kernel.org/r/20240420034300.176920-4-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: add PCIe3 support on rk3588-jaguarHeiko Stuebner1-0/+59
The Jaguar SBC provides an M.2 slot connected to the pcie3 controller. In contrast to a number of other boards the pcie-refclk is gpio-controlled, so the necessary clock and is added to the list of pcie3 clocks. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240423074956.2622318-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tigerHeiko Stuebner2-1/+5
The association of uart2 to the q7-uart pins is part of the module itself and not the baseboard used. Therefore move the pinctrl over to the tiger dtsi. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422143356.2596414-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-novaChris Morgan1-1/+70
Add support for the USB-C port on the Indiedroid Nova board. This port supports USB-C DP Alt mode (not implemented yet in drivers), but works as a USB XHCI/EHCI/OHCI port. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240418173627.1368494-1-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: correct the model name for Radxa ROCK 3AChukun Pan1-1/+1
According to https://radxa.com/products/rock3/3a, the name of this board should be "Radxa ROCK 3A". Suggested-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240419103019.992586-3-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-23arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boardsDragan Simic2-2/+2
Correct the descriptions of a few Radxa boards, according to the up-to-date documentation from Radxa and the detailed explanation from Naoki. [1] To sum it up, the short naming, as specified by Radxa, is preferred. [1] https://lore.kernel.org/linux-rockchip/B26C732A4DCEA9B3+282b8775-601b-4d4a-a513-4924b7940076@radxa.com/ Suggested-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/6931289a252dc2d6c7bfd2388835c5e98ba0d8c9.1713457260.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: add lower USB3 port to rock-5bSebastian Reichel1-0/+17
Enable full support (XHCI, EHCI, OHCI) for the lower USB3 port from Radxa Rock 5 Model B. The upper one is already supported. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-11-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: add upper USB3 port to rock-5aSebastian Reichel1-0/+18
Enable full support (XHCI, EHCI, OHCI) for the upper USB3 port from Radxa Rock 5 Model A. The lower one is already supported. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-10-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: add USB3 to rk3588-evb1Sebastian Reichel1-0/+147
Add support for the board's USB3 connectors. It has 1x USB Type-A and 1x USB Type-C. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-9-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: add USB3 DRD controllers on rk3588Sebastian Reichel2-0/+42
Add both USB3 dual-role controllers to the RK3588 devicetree. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-8-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: add USBDP phys on rk3588Sebastian Reichel2-0/+115
Add both USB3-DisplayPort PHYs to RK3588 SoC DT. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-7-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: reorder usb2phy properties for rk3588Sebastian Reichel1-8/+8
Reorder common DT properties alphabetically for usb2phy, according to latest DT style rules. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-6-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-12arm64: dts: rockchip: fix usb2phy nodename for rk3588Sebastian Reichel1-2/+2
usb2-phy should be named usb2phy according to the DT binding, so let's fix it up accordingly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-11arm64: dts: rockchip: Add RTC to Khadas Edge 2Muhammed Efe Cetin1-0/+12
Khadas Edge 2 has PT7C4363 RTC that compatible with HYM8563. The RTC pinctrl is also connected to MCU. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/4c4c9140ff36f290ba64ecc8b3e218df6a5ab273.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-11arm64: dts: rockchip: Add UART9 (bluetooth) to Khadas Edge 2Muhammed Efe Cetin1-0/+20
Khadas Edge 2 has onboard AP6275P Wi-Fi6 (PCIe2) and BT5 (UART9) module. This commit enables UART9. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/0a10afeff3aec3a8bccca2dbe4e65f7b4a2c4666.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add SFC to Khadas Edge 2Muhammed Efe Cetin1-0/+14
This commit adds SPI flash support for Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/00942603f7e61ecb2a0067bebf6795dab3571613.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add saradc and adc buttons to Khadas Edge 2 and enable ↵Muhammed Efe Cetin1-0/+24
tsadc This commit enables tsadc, saradc and the function button on saradc line for Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/03feaafefd0c13268ba1630251558749654a567d.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2Muhammed Efe Cetin1-0/+66
Khadas Edge 2 exposes IR receiver pins as same as TF card via EXTIO. The IR receiver is connected to MCU and SoC. The board also has 2 PWM RGB leds. One is controlled by MCU and the other is controlled by SoC. This commit adds support for the led controlled by SoC using pwm-leds. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/335629f57e593e20418a4a55a1e662505640cbde.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: USB2, USB3 Host, PCIe2 to Khadas Edge 2Muhammed Efe Cetin1-0/+97
Khadas Edge 2 has 1x USB2 with hub, 1x USB3 Host and 1x USB-C. This commit adds support for PCIe2, USB3 Host and USB2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/4d22afd70e5583458f405f5170f67690584e7efa.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add TF card to Khadas Edge 2Muhammed Efe Cetin1-0/+34
Add TF card support to Khadas Edge 2. The board exposes sdmmc pins via EXTIO. TF card can be used with IO module. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/6e9062feb40bbad304f2e5bb300601034e805081.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add PMIC to Khadas Edge 2Muhammed Efe Cetin1-0/+332
This commit adds PMIC to Khadas Edge 2 board. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/617faf64a68f5af560267d77fd23fc9fb23e6c88.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2Muhammed Efe Cetin1-0/+81
This commit adds 5V fixed power regulator and CPU regulators to Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/5a7bd2cd8703e51382abfc11242de59d45286477.1708381247.git.efectn@protonmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add GameForce ChiChris Morgan2-0/+810
Add support for the GameForce Chi, which is a handheld gaming console from GameForce with a Rockchip RK3326 SoC. The device has a 640x480 3.5" dual-lane DSI display, one analog joystick connected to the SoC SARADC controller and a second analog joystick connected to an unknown UART based ADC, a single SD card slot, a single USB-C port for charging, and onboard RTL8723BS WiFi/Bluetooth combo, multiple face buttons, and an array of R/G/B LEDs used for key backlighting. The vendor was unable to provide details on the unknown UART based ADC which I have documented via a comment in the device-tree, and the vendor also does not have available Bluetooth firmware (the BT was not previously working on the vendor's OS, this has also been noted in a device-tree comment). Aside from the right analog ADC joystick and bluetooth all hardware has been tested and is working as expected. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325134959.11807-6-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Correct model name for Powkiddy RK3566 DevicesChris Morgan2-2/+2
Some Powkiddy model names begin with the company "Powkiddy" and others simply list the model number. Make this consistent across the device lineup by including the manufacturer in the model name. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325175133.19393-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add chasis-type for Powkiddy rk3566 devicesChris Morgan2-0/+3
Add the optional node of chasis-type for Powkiddy RK3566 based devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325175133.19393-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Correct model name for Anbernic RGxx3 DevicesChris Morgan5-5/+5
Some Anbernic model names begin with the company "Anbernic" and others simply list the model number. Make this consistent across the device lineup by including the manufacturer in the model name. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325143729.83852-5-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add optional node for chasis-type on Anbernic rgxx3Chris Morgan1-0/+2
Add optional node for chasis-type defining this device as a handset. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325143729.83852-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Add additional properties for WiFi on Anbernic rgxx3Chris Morgan1-0/+3
Add additional properties for the SDMMC2 node. Based on user feedback these help correct some issues with probing the WiFi hardware. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240325143729.83852-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: add Forlinx OK3588-CDmitry Yashin2-0/+410
OK3588-C is the carrier board for FET3588-C System on Module. OK3588-C features: - 2x 1GbE Realtek RTL8211F Ethernet - 1x HDMI Type A out - 1x HDMI Type A in - 3x USB 3.1 Type C (2x OTG and 1x serial console) - 1x USB 2.0 Type A - 1x USB 3.0 & USB 2.0 Combo M.2 M Key (4G/5G modem) - 1x PCIE 2.0 M.2 E Key (1 lane) - 1x PCIE 2.0 PCIe (1 lane) - 1x PCIE 3.0 PCIe (4 lanes) - 1x TF scard slot - 5x MIPI CSI - 2x MIP DSI - 2x CAN2.0B - 1x RS485 - 1x NAU8822 onboard audio - 1x FAN connector - 1x RTC - 20-pin expansion header - ADC keys Add support for Forlinx OK3588-C board. Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com> Link: https://lore.kernel.org/r/20240403151229.30577-4-dmt.yashin@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: add Forlinx FET3588-CDmitry Yashin1-0/+558
FET3588-C is an System on Module made by Forlinx based on Rockchip RK3588. This SoM used by OK3588-C Board. FET3588-C features: - Rockchip RK3588 - LPDDR4 4/8 GB - eMMC 32/64 GB Add support for Forlinx FET3588-C SoM. Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com> Link: https://lore.kernel.org/r/20240403151229.30577-3-dmt.yashin@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: add Protonic MECSBC device-treeDavid Jander2-0/+405
MECSBC is a single board computer for blood analysis machines from RR-Mechatronics, designed and manufactured by Protonic Holland, based on the Rockchip RK3568 SoC. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240405-protonic-mecsbc-v2-2-0a6fedc78b9f@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10arm64: dts: rockchip: Fix ordering of nodes on rk3588sDiederik de Haas1-152/+152
Fix the ordering of the main nodes by sorting them alphabetically and then the ones with a memory address sequentially by that address. Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20240406172821.34173-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-01arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK 4C+Folker Schwesinger1-1/+3
Commit 8b5c2b45b8f0 disabled the internal pull-down for the strobe line causing I/O errors in HS400 mode for various eMMC modules. Enable the internal strobe pull-down for the ROCK 4C+ board. Also re-enable HS400 mode, that was replaced with HS200 mode as a workaround for the stability issues in: 2bd1d2dd808c ("arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+"). Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts") Signed-off-by: Folker Schwesinger <dev@folker-schwesinger.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240327192641.14220-3-dev@folker-schwesinger.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-01arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4Folker Schwesinger1-1/+3
Commit 8b5c2b45b8f0 disabled the internal pull-down for the strobe line causing I/O errors in HS400 mode for various eMMC modules. Enable the internal strobe pull-down for ROCK Pi 4 boards. Also re-enable HS400 mode, that was replaced with HS200 mode as a workaround for the stability issues in: cee572756aa2 ("arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4"). This was tested on ROCK 4SE and ROCK Pi 4B+. Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts") Signed-off-by: Folker Schwesinger <dev@folker-schwesinger.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240327192641.14220-2-dev@folker-schwesinger.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-01arm64: dts: rockchip: Enable gpu on Cool Pi 4BAndy Yan1-0/+5
Enable mali gpu node and add the board specific supply-regulator. Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20240330100134.3588223-2-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-01arm64: dts: rockchip: Enable gpu on Cool Pi CM5Andy Yan1-0/+5
Enable mali gpu node and add the board specific supply-regulator. Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20240330100134.3588223-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-03-27arm64: dts: rockchip: enable gpu on rk3588-tigerHeiko Stuebner1-0/+5
Enable the mali gpu node and add the som-specific supply-regulator. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240327112120.1181570-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-03-27arm64: dts: rockchip: enable gpu on rk3588-jaguarHeiko Stuebner1-0/+5
Enable the mali gpu node and add the board-specific supply-regulator. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240327112120.1181570-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 19:36:12 +0300