summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-10-07arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbersJosua Mayer1-1/+1
SolidRun CN9130 SoM actually uses CP_MPP[0:1] for mdio. CP_MPP[40] provides reference clock for dsa switch and ethernet phy on Clearfog Pro, wheras MPP[41] controls efuse programming voltage "VHV". Update the cp0 mdio pinctrl node to specify mpp0, mpp1. Fixes: 1c510c7d82e5 ("arm64: dts: add description for solidrun cn9130 som and clearfog boards") Cc: stable@vger.kernel.org # 6.11.x Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/stable/20241002-cn9130-som-mdio-v1-1-0942be4dc550%40solid-run.com Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-09-26Merge tag 'char-misc-6.12-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits) greybus: gb-beagleplay: Add firmware upload API arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7 dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios MAINTAINERS: Update path for U-Boot environment variables YAML nvmem: layouts: add U-Boot env layout comedi: ni_routing: tools: Check when the file could not be opened ocxl: Remove the unused declarations in headr file hpet: Fix the wrong format specifier uio: Constify struct kobj_type cxl: Constify struct kobj_type binder: modify the comment for binder_proc_unlock iio: adc: axp20x_adc: add support for AXP717 ADC dt-bindings: iio: adc: Add AXP717 compatible iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0 tools: iio: rm .*.cmd when make clean iio: adc: standardize on formatting for id match tables iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems ...
2024-09-26Merge tag 'tty-6.12-rc1' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver updates for 6.12-rc1. Nothing major in here, just nice forward progress in the slow cleanup of the serial apis, and lots of other driver updates and fixes. Included in here are: - serial api updates from Jiri to make things more uniform and sane - 8250_platform driver cleanups - samsung serial driver fixes and updates - qcom-geni serial driver fixes from Johan for the bizarre UART engine that that chip seems to have. Hopefully it's in a better state now, but hardware designers still seem to come up with more ways to make broken UARTS 40+ years after this all should have finished. - sc16is7xx driver updates - omap 8250 driver updates - 8250_bcm2835aux driver updates - a few new serial driver bindings added - other serial minor driver updates All of these have been in linux-next for a long time with no reported problems" * tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: samsung: Fix serial rx on Apple A7-A9 tty: serial: samsung: Fix A7-A11 serial earlycon SError tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_* tty: rp2: Fix reset with non forgiving PCIe host bridges serial: 8250_aspeed_vuart: Enable module autoloading serial: qcom-geni: fix polled console corruption serial: qcom-geni: disable interrupts during console writes serial: qcom-geni: fix console corruption serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield() serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit() soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers serial: qcom-geni: fix false console tx restart serial: qcom-geni: fix fifo polling timeout tty: hvc: convert comma to semicolon mxser: convert comma to semicolon serial: 8250_bcm2835aux: Fix clock imbalance in PM resume serial: sc16is7xx: convert bitmask definitions to use BIT() macro serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK serial: xilinx_uartps: Make cdns_rs485_supported static ...
2024-09-23Merge tag 'pci-v6.12-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...
2024-09-21Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...
2024-09-17Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds451-5775/+29013
Pull SoC devicetree updates from Arnd Bergmann: "New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three of these are variants of already supported chips, in particular the last one is almost identical to MSM8939. Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm, STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra, and T-HEAD. The added Qualcomm platform support once again dominates the changes, with seven phones and three laptops getting added in addition to many new features on existing machines. The Snapdragon X1E support specifically keeps improving. The other new machines are: - eight new machines using various 64-bit Rockchips SoCs, both on the consumer/gaming side and developer boards - three industrial boards with 64-bit i.MX, which is a very low number for them. - four more servers using a 32-bit Speed BMC - three boards using STM32MP1 SoCs - one new machine each using allwinner, amlogic, broadcom and renesas chips" * tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits) arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio arm64: dts: mediatek: add audio support for mt8365-evk arm64: dts: mediatek: add afe support for mt8365 SoC arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface arm64: dts: mediatek: mt8186: Add svs node arm64: dts: mediatek: mt8186: Add power domain for DPI arm64: dts: mediatek: mt8195: Correct clock order for dp_intf* arm64: dts: mt8183: add dpi node to mt8183 arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board arm64: dts: rockchip: add CAN-FD controller nodes to rk3568 arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes arm64: dts: nuvoton: Add syscon to the system-management node ARM: dts: Fix undocumented LM75 compatible nodes arm64: dts: toshiba: Fix pl011 and pl022 clocks ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Add MECIO1 and MECT1S board variants ...
2024-09-12Merge tag 'sunxi-dt-for-6.12-2' of ↵Arnd Bergmann1-0/+37
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.12 part 2 ARM64 device tree and binding-only changes - Add system and pin voltage regulator supplies for NanoPi NEO Plus2 * tag 'sunxi-dt-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators Link: https://lore.kernel.org/r/ZuKmwD8VQrvNx8ir@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-12arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7Ayush Singh1-1/+2
Add bootloader-backdoor-gpios which is required for enabling bootloader backdoor for flashing firmware to cc1352p7. Also fix the incorrect reset-gpio. Signed-off-by: Ayush Singh <ayush@beagleboard.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20240903-beagleplay_fw_upgrade-v4-2-526fc62204a7@beagleboard.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-11arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pioKryštof Černý1-0/+12
Pin controllers pio and r_pio will have proper regulators assigned. Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240905-nanopi-neo-plus2-regfix-v3-2-1895dff59598@gmail.com [wens@csie.org: Make "h5" lowercase to match most commits] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-11Merge tag 'arm-soc/for-6.12/devicetree-arm64' of ↵Arnd Bergmann3-0/+348
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64 SoCs Device Tree changes for 6.12, please pull the following: - Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712) - Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to conform to the binding changes * tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837/bcm2712: adjust local intc node names arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.11-next-dts64' of ↵Arnd Bergmann20-63/+1066
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt mt63xx: - add ADC node to the different PMICs mt7981: - Add SPI controller nodes. mt8183: - use referenced label for DSI endpoint. - disable soc_data efuse node, which does not has any cell definde (kukui). - fix the regulator tree (kukui). - fix potential deadlock by removing not needed clock in the MFG async power domain. - add DPI node. mt8186: - fix opp-supported-hw mask for GPU. - add lvts thermal sensor node. - add thermal zones. - fix reserved memory region of ADSP firmware (corsola). - add power domain to DPI node. - add SVS node. - fix internal display by disabling the external display temporarily (corsola). mt8188: - add thermal sensor for the AP. - add thermal zones. mt8195: - fix pull resistance for hdmi pins (cherry). - remove keyboard backlight node (cherry), this is detected through ChromeOS EC communication. - fix warning in mdp3 driver by providing a phandel to the SCP. - fix probe error of the USB controller by disabeling USB3 on the controller (cherry). - assign per default both phys to the USB controller (cherry). - fix binding validation by re-ordering the dp_intf clocks. mt8365: - add AFE audio controller. - add AFE and audio codec support (evk). mt8395: - fix probe error of the USB controller by disabeling USB3 on the controller (radax-nio-12l). - assign per default both phys to the USB controller (genio, kontron, radax). * tag 'v6.11-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (25 commits) arm64: dts: mediatek: add audio support for mt8365-evk arm64: dts: mediatek: add afe support for mt8365 SoC arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface arm64: dts: mediatek: mt8186: Add svs node arm64: dts: mediatek: mt8186: Add power domain for DPI arm64: dts: mediatek: mt8195: Correct clock order for dp_intf* arm64: dts: mt8183: add dpi node to mt8183 arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain arm64: dts: mt8183-kukui: clean up regulator tree arm64: dts: mediatek: mt7981: add SPI controllers arm64: dts: mediatek: mt8183-kukui: Disable unused efuse at 8000000 arm64: dts: mediatek: mt8188: add default thermal zones arm64: dts: mediatek: mt8188: add lvts definitions arm64: dts: mediatek: mt8186: add default thermal zones arm64: dts: mediatek: mt8186: add lvts definitions arm64: dts: mediatek: mt8195: Assign USB 3.0 PHY to xhci1 by default arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195: Add SCP phandle to MDP3 DMA controller ... Link: https://lore.kernel.org/r/059656ad-5365-4097-86a1-f4ba43edf5da@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.12-rockchip-dts64-2' of ↵Arnd Bergmann10-21/+2213
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588 and some non-critical dts cleanups. * tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board arm64: dts: rockchip: add CAN-FD controller nodes to rk3568 arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE arm64: dts: rockchip: Add GameForce Ace dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: rk3588s fix sdio pins to pull up arm64: dts: rockchip: Add RGA2 support to rk3588 arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b arm64: dts: rockchip: Add Hardkernel ODROID-M2 dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2 arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6 Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'dt64-cleanup-6.12' of ↵Arnd Bergmann10-40/+37
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.12 1. APM: correct node name to match bindings. 2. Spreadtrum: correct node names to match bindings, order properties to match DTS coding style and put SPDX identifier at top of the file as expected usually. * tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: sprd: move/add SPDX license to top of the file arm64: dts: sprd: reorder clock-names after clocks arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-09arm64: dts: mediatek: add audio support for mt8365-evkAlexandre Mergnat1-0/+86
Add the sound node which is linked to the MT8365 SoC AFE and the MT6357 audio codec. Update the file header. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20240226-audio-i350-v8-5-e80a57d026ce@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: add afe support for mt8365 SoCAlexandre Mergnat1-2/+41
Add audio front end support of MT8365 SoC. Update the file header. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20240226-audio-i350-v8-4-e80a57d026ce@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186-corsola: Disable DPI display interfaceChen-Yu Tsai1-1/+2
The DPI display interface feeds the external display pipeline. However the pipeline representation is currently incomplete. Efforts are still under way to come up with a way to represent the "creative" repurposing of the DP bridge chip's internal output mux, which is meant to support USB type-C orientation changes, to output to one of two type-C ports. Until that is finalized, the external display can't be fully described, and thus won't work. Even worse, the half complete graph potentially confuses the OS, breaking the internal display as well. Disable the external display interface across the whole Corsola family until the DP / USB Type-C muxing graph binding is ready. Reported-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Closes: https://lore.kernel.org/linux-mediatek/38a703a9-6efb-456a-a248-1dd3687e526d@gmail.com/ Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240821042836.2631815-1-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186: Add svs nodeRohit Agarwal1-0/+16
Add clock/irq/efuse setting in svs nodes for mt8186 SoC. Signed-off-by: Rohit Agarwal <rohiagar@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240830084544.2898512-4-rohiagar@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8186: Add power domain for DPIRohit Agarwal1-0/+1
Add power domain phandle to the DPI controller in mediatek mt8186 SoC. Signed-off-by: Rohit Agarwal <rohiagar@chromium.org> Link: https://lore.kernel.org/r/20240830084544.2898512-3-rohiagar@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*Chen-Yu Tsai1-6/+6
The clocks for dp_intf* device nodes are given in the wrong order, causing the binding validation to fail. Fixes: 6c2503b5856a ("arm64: dts: mt8195: Add dp-intf nodes") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240802070951.1086616-1-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-09arm64: dts: mt8183: add dpi node to mt8183Pi-Hsun Shih1-0/+11
Add dpi node to mt8183. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240819120735.1508789-1-treapking@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2024-09-08arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulatorsKryštof Černý1-0/+25
Added the main board 5 V supply regulator, a 2.5 V supply regulator for GMAC PHY IO and correct vin-supply elements. Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240905-nanopi-neo-plus2-regfix-v3-1-1895dff59598@gmail.com [wens@csie.org: Make "h5" lowercase to match most commits] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-05arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc boardDavid Jander1-0/+14
This patch adds support for the CAN0 and CAN1 interfaces to the board. Signed-off-by: David Jander <david@protonic.nl> Tested-by: Alibek Omarov <a1ba.omarov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20240904-rk3568-canfd-v1-2-73bda5fb4e03@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-05arm64: dts: rockchip: add CAN-FD controller nodes to rk3568David Jander1-0/+39
Add nodes to the rk3568 devicetree to support the CAN-FD controllers. Signed-off-by: David Jander <david@protonic.nl> Tested-by: Alibek Omarov <a1ba.omarov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20240904-rk3568-canfd-v1-1-73bda5fb4e03@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-05Merge tag 'sunxi-dt-for-6.12' of ↵Arnd Bergmann5-4/+78
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.12 ARM64 device tree and binding-only changes - Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C - Introduce Anbernic RG35XX-SP board - Enable charger on RG35XX boards - Add thermal trip points for Allwinner A64 GPU * tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes dt-bindings: arm: sunxi: Add Anbernic RG35XXSP Link: https://lore.kernel.org/r/ZtnZRhTwsBeO7Qtb@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: ma35d1: Add uart pinctrl settingsJacky Huang2-8/+155
Enable all UART nodes presented on som and iot boards, and add pinctrl function settings to these nodes. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-4-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodesJacky Huang1-0/+149
Added the pinctrl node and its subnodes, the gpioa through gpion nodes, to the MA35D1 device tree. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-3-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: nuvoton: Add syscon to the system-management nodeJacky Huang1-1/+1
According to the binding document, add the "syscon" compatible to the system-management node. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20240819035647.306-2-ychuang570808@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'amlogic-arm64-dt-for-v6.12' of ↵Arnd Bergmann60-9/+1506
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.12: - New Boards: - AW419 (Amlogic C3) - Power Controller node for Amlogic A5 SoC - Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs - Amlogic A4 & C3 hardware support: - PLL, SPICC, NOND, SDCard, Ethernet, Watchdog - Final fixes for DTBs check: - add clock and clock-names to sound cards - drop saradc gxlx compatible * tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible arm64: dts: amlogic: add clock and clock-names to sound cards arm64: dts: amlogic: c3: fix dtbcheck warning arm64: dts: amlogic: add C3 AW419 board arm64: dts: amlogic: add some device nodes for C3 dt-bindings: clock: fix C3 PLL input parameter arm64: dts: amlogic: a4: add ao secure node arm64: dts: amlogic: t7: add ao secure node arm64: dts: amlogic: c3: add ao secure node arm64: dts: amlogic: s4: add ao secure node arm64: dts: amlogic: add watchdog node for A4 SoCs arm64: dts: amlogic: enable some device nodes for S4 arm64: dts: amlogic: a5: add power domain controller node Link: https://lore.kernel.org/r/cc8fb460-5ac0-4b16-8490-8ac9f89f1b7f@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: toshiba: Fix pl011 and pl022 clocksRob Herring1-22/+22
Arm Primecell blocks have a functional clock and a bus clock. The Toshiba TMPV7708 only defines the bus clock (apb_pclk). Add the "uartclk" and "sspclk" clocks to the PL011 and PL022 nodes, respectively. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240826183848.1290957-2-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'qcom-arm64-for-6.12' of ↵Arnd Bergmann75-256/+6507
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.12 This introduces support for the following devices: - Lenovo Thinkpad T14s Gen 6 - Microsoft Surface Laptop 7 laptop - Lenovo A6000 - Lenovo A6010 - Samsung Galaxy J3, - Lenovo Vibe K5 (multiple variants) - LG G4 IPQ5332 global clock controller is marked as an interconnect-provider, and the USB interrupt triggers are corrected. Touchscreen description is added to the Samsung Galaxy Core Prime and Max, and touch keys are added to the Samsung Galaxy Grand Prime and Galaxy Tab A. Camera flash is added to BQ Aquaris M5 and X5. The SD-card slot is described for the QCM6490 IDP. For SA8775P CPU and LLCC bwmon is added, audio, compute and general purpose DSP remoteprocs are added, with FastRPC on audio and compute DSP. CPUidle states, capacity and DPC properties are added. On SC8180X definitions for the multiport USB controller is introduced, and enabled on the Lenovo Flex 5G to bring the camera to life. Power key definitions are added as well. The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe pinconf properties are cleaned up on this and the CRD. The four USB Type-A ports found on the SA8295P ADP are enabled. The modem subsystem remoteproc is introduced on the SDX75 and enabled on the IDP device. Camera, display and GPU clock controllers are added for the SM4450 platform. On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card, remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch, caps lock LED and camera button are introduced. The camera clock controller is added to SM8150, and the GPU-only "amd,imageon" compatible is dropped from the MTP device. Refgen regulator for the DSI nodes of SM8350 is described, and the display subsystem interconnect paths are corrected. The camera control interface controllers are described on both SM8550 and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650 HDK are transitioned to the power sequence description. WiFi is added to the SM8550 hardware development kit (HDK). On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB multiport controller, a PCIe controller and PHY are added. Orientation switching is wired up for the USB+DP PHYs. RPMh statistics node is added. For the X1 Elite CRD the LID switch and the SDX65 modems are introduced. * tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits) arm64: dts: qcom: x1e80100: Fix PHY for DP2 arm64: dts: qcom: qcm6490-idp: Add SD Card node arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6 dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6 Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices arm64: dts: qcom: x1e80100: Add UART2 arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM dt-bindings: arm: qcom: Add Surface Laptop 7 devices arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes arm64: dts: qcom: x1e80100: Add USB Multiport controller arm64: dts: qcom: sa8775p: fix the fastrpc label arm64: dts: qcom: ipq5332: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ5332 support arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6 dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions arm64: dts: qcom: msm8976: Add restart node ... Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'imx-dt64-6.12' of ↵Arnd Bergmann108-401/+5210
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.12: - A series from Alexander Stein that improves imx93-tqma9352 board support by adding PMIC, eMMC regulators, pad configurations, etc. - A series from Benjamin Hahn that enables overlay for no Ethernet device, TPM and PCIe support for imx8mp-phycore board - A few changes from Fabio Estevam that fix dt-schema warnings for i.MX8MM and i.MX93 based boards - A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC thermal zone and USB3803 HUB for colibri-imx8x board - A great number of changes from Frank Li that improve i.MX95 based with many device additions, and fix dt-schema warnings on various i.MX8 and layerscape device trees - A series from João Paulo Gonçalves to add HDMI audio, analog input, VPU, and sound card support for Toradex Verdin and Colibri boards - A series from Markus Niebel to improve imx93-tqma9352 board support - Add support for Kontron i.MX93 OSM-S SoM and BL carrier board - A couple of changes from Peng Fan to describe cache configuration for i.MX93 SoC and add device tree for i.MX93-14x14-EVK board - A series from Shengjiu Wang to improve various audio features for imx93-11x11-evk board - A series from Yashwanth Varakala to better describe regulator usage for imx8mp-phyboard-pollux board - Other random changes on various board device trees * tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits) arm64: dts: imx: rename gpio hog as <gpio name>-hog arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM arm64: dts: imx8mm-var-som: drop unused top-level compatible arm64: dts: ls1088ardb: add new RTC PCF2131 support arm64: dts: colibri-imx8x: Cleanup comments arm64: dts: colibri-imx8x: Add 50mhz clock for eth arm64: dts: colibri-imx8x: Add adma_pwm arm64: dts: colibri-imx8x: Add vpu support arm64: dts: colibri-imx8x: Add USB3803 HUB arm64: dts: colibri-imx8x: Add PMIC thermal zone arm64: dts: colibri-imx8x: Add sound card arm64: dts: colibri-imx8x: Add fxl6408 gpio expander arm64: dts: colibri-imx8x: Add analog inputs arm64: dts: colibri-imx8x: Add usb support arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region arm64: dts: imx8qm: add mipi subsystem arm64: dts: imx8: add basic mipi subsystem ... Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'ti-k3-dt-for-v6.12' of ↵Arnd Bergmann50-113/+1587
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.12 Generic Fixups/Cleanups: - AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups - J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges - j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep - j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage. - Misc device tree warning fixups: Serdes simple-mfd fixes for am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names SoC Specific features and Fixes: New boards: - AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI AM62: - Thermal throttling enabled AM62A: - Add E5010 JPEG encoder AM62P: - gpio-reserved ranges - SK: drop cts/rts for wakeup_uart0 firmware console pinmux J722s: (AM62P variant) - IPC/Remote proc for C7x and R5F - gpio-reserved ranges - EVM: Add main_uart5 description and CAN support. AM64x: - adc description fixes for dtbs_check warnings - tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability - CPSW Ethernet is now disabled by default at SoC level and enabled explicitly at board level. - USB property to add fall back to j721e AM65x: - IOT2050: Add overlays for M.2, add Eth phy LED description - idk: Fixes for DMA causing dtbs_check warning, Add MCAN J721e: - SK and beagleboneai64: Fixes for inverted C6x carveouts J721s2: - AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup alignment fixup. J784s4: - WDT clock ID fix. - EVM: Use 4 lanes for PCIe0. * tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits) arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash arm64: dts: ti: Add k3-am67a-beagley-ai dt-bindings: arm: ti: Add BeagleY-AI arm64: dts: ti: iot2050: Declare Ethernet PHY leds arm64: dts: ti: k3-am65: Add ESM nodes arm64: dts: ti: k3-am64: Add more ESM interrupt sources arm64: dts: ti: k3-am62a: Add ESM nodes arm64: dts: ti: k3-am62: Add comments to ESM nodes arm64: dts: ti: k3-am62p: Fix ESM interrupt sources arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges arm64: dts: ti: k3-j721e: Include entire FSS region in ranges arm64: dts: ti: k3-am65: Include entire FSS region in ranges arm64: dts: ti: k3-am64: add USB fallback compatible to J721E ... Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'renesas-dts-for-v6.12-tag2' of ↵Arnd Bergmann22-83/+1514
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.12 (take two) - Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the White-Hawk (Single) development board, - Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk board, - Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board, - Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK boards, - Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H EVK board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC dt-bindings: soc: renesas: Document RZ/V2H EVK board dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG arm64: dts: renesas: r9a07g043u11-smarc: Enable DU arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio arm64: dts: renesas: r9a07g043u: Add DU node ... Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05Merge tag 'v6.11-rockchip-dtsfixes' of ↵Arnd Bergmann4-11/+40
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns out the VO0 and VO1 general register files are not identical as suggested by their original compatible. As there are no users of those yet, everybody agreed that we should fix the compatibles. * tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatibleNeil Armstrong1-4/+0
Drop the undocumented amlogic,meson-gxlx-saradc compatible by dropping the compatible override, and fix the following DTBs check: /soc/bus@c1100000/adc@8680: failed to match any schema with compatible: ['amlogic,meson-gxlx-saradc', 'amlogic,meson-saradc'] Fixes: f6386b5afa81 ("arm64: dts: meson: add GXLX/S905L/p271 support") Link: https://lore.kernel.org/r/20240905-topic-amlogic-upstream-gxlx-drop-iio-compat-v2-1-7a690eb95bc2@linaro.org [narmstrong: fix commit message] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-04arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SEFUKAUMI Naoki1-15/+0
these nodes just define same properties in rk3399-rock-pi-4.dtsi. remove them from rk3399-rock-4se.dts. sha256sum rk3399-rock-4se.dtb generates same hash value before/after this change. Fixes: 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20240903073544.2161-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add GameForce AceChris Morgan2-0/+1238
The GameForce Ace is a portable gaming device based on the Rockchip RK3588s SoC. The device contains the following hardware that is tested/working: - 128GB eMMC - SDMMC card slot - Ampak SDIO WiFi 5/BT - NVME 2242 socket - 8 or 12GB of RAM - Goodix based touchscreen - Stereo speakers, internal microphone, and TRRS headphone jack. - Dual GPIO vibrators (implemented as gpio-pwm because they are quite strong) - Multiple face buttons, dual analog joysticks, and dual analog triggers - PWM fan with tach pin. The device also contains the following hardware that is partially or currently not working: - 1920x1080 DSI display - HDMI port - USB-C port with DP alt-mode - TI bq25703 charger controller Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: rk3588s fix sdio pins to pull upAlex Zhao1-5/+5
The sdio requires the cmd and data pins to pull up by soc. Signed-off-by: Alex Zhao <zzc@rock-chips.com> [adapted to pinctrl filename change] Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add RGA2 support to rk3588Jianfeng Liu1-0/+11
RK3588 also features a RGA2 block. Add the necessary device tree node. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Tested-by: Tim Surber <me@timsurber.de> Link: https://lore.kernel.org/r/20240831182424.758816-2-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-bDiederik de Haas1-0/+2
Add the missing TSADC properties `rockchip,hw-tshut-mode` and `rockchip,hw-tshut-polarity` to the Pine64 Quartz64 Model B. This fixes the following warnings: rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio) rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low) Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20240831112949.60091-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add Hardkernel ODROID-M2Jonas Karlman2-0/+904
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Add initial support for eMMC, SD-card, Ethernet, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240901112020.3224704-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6Heiko Stuebner1-1/+0
The audio-card contains a hp-pin-name property that is not part of the binding, and its contents also are just a "Headphones" string. So that property also does not fullfill any specific use, therefore just drop it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240830203819.1972536-4-heiko@sntech.de
2024-09-04arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsiDragan Simic1-0/+16
Add thermal trips for the two GPU thermal sensors found in the Allwinner A64. There's only one GPU OPP defined since the commit 1428f0c19f9c ("arm64: dts: allwinner: a64: Run GPU at 432 MHz"), so defining only the critical thermal trips makes sense for the A64's two GPU thermal zones. Having these critical thermal trips defined ensures that no hot spots develop inside the SoC die that exceed the maximum junction temperature. That might have been possible before, although quite unlikely, because the CPU and GPU portions of the SoC are packed closely inside the SoC, so the overheating GPU would inevitably result in the heat soaking into the CPU portion of the SoC, causing the CPU thermal sensor to return high readings and trigger the CPU critical thermal trips. However, it's better not to rely on the heat soak and have the critical GPU thermal trips properly defined instead. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Tested-by: Norayr Chilingarian <norayr@arnet.am> Link: https://lore.kernel.org/r/0a6110a7b27a050bd58ab3663087eecd8e873ac0.1724126053.git.dsimic@manjaro.org Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-04arm64: dts: allwinner: h700: Add charger for Anbernic RG35XXChris Morgan1-0/+21
Add the necessary nodes for the AXP717 to allow for monitoring the USB and battery charger. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240821215456.962564-16-macroalpha82@gmail.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-04arm64: dts: imx: rename gpio hog as <gpio name>-hogFrank Li9-13/+13
Rename admin_led_lower to admin-led-lower-hog. Rename gpio rs485_en as rs485-en-hog. Rename gpio uart4_rs485_en to uart4-rs485-en-hog. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76: 'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb: gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb: gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and ↵Tarang Raval3-0/+371
VAR-SOM-MX8MP SoM Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which is delivered with the Variscite Symphony Evaluation Kit. Initial support includes: - Serial console - eMMC - SD card Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: imx8mm-var-som: drop unused top-level compatibleKrzysztof Kozlowski1-1/+0
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone without motherboard, so drop the top-level compatible field to avoid any false impression that such usage is possible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: ls1088ardb: add new RTC PCF2131 supportJoy Zou1-0/+7
Add RTC PCF2131 node for new ls1088ardb board.. Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Cleanup commentsJoão Paulo Gonçalves1-4/+0
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN, and the GPU is already enabled in the SOC dtsi. Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04arm64: dts: colibri-imx8x: Add 50mhz clock for ethPhilippe Schenker1-0/+15
Change enet0_lpcg to get the clock value needed in Colibri-iMX8X for 100mbps ethernet. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 01:13:24 +0300