| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Radxa E20C has three gpio controlled leds (sys, wan and lan).
Add led nodes and set default trigger to heartbeat for the sys led and
netdev for the lan and wan leds.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250304201642.831218-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable HDMI and VOP nodes for the rock-4d board.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20250306180737.127726-1-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Same as RK3568, RK3528 uses SCMI clk instead of ARMCLK.
Add SCMI clk for CPU, GPU and RNG will also use it.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250307100008.789129-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Rock 5B has a Micro HDMI port, which can be used for receiving
HDMI data. This enables support for it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250307091857.646581-3-dmitry.osipenko@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add device tree support for Synopsys DesignWare HDMI RX
Controller.
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250307091857.646581-2-dmitry.osipenko@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Quality-of-Service (QsS) node stores/restores specific
register contents when the power domains is turned off/on.
Add QoS node so that they can connect to the power domain.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250306123809.273655-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for samsung,s6sy761 touchscreen.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-9-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for s2dos05 display / touchscreen PMIC
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-8-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for max77705 MFD device. Supported sub-devices:
charger, fuelgauge, haptic, led
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-7-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for phone buttons.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-6-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Starqltechn has 2 reserved gpio ranges <27 4>, <85 4>.
<27 4> is spi for eSE(embedded Secure Element).
<85 4> is spi for fingerprint.
Remove excess reserved gpio regions.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-5-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-4-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-3-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-2-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Leave gmu enabled, because it's only probed when
GPU is.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-1-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Jetson TX1 module contains a TI TMP451 temperature sensor.
Add a DT node for it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-4-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fill out the DT nodes enabling both TCA9539 chips as IRQ controllers.
Proper functionality was tested for both instances.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-3-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
As the gpio pads are capable of operating at either 1.8V or 3.3V add
both options to the pinmuxing so that the appropriate level can be set
depending on the voltage of the regulator driving the pads.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-2-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-1-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Some discrete graphics cards such as the NVIDIA RTX A6000 support
resizable BARs. When connecting an A6000 card to the NVIDIA IGX Orin
platform, resizing the BAR1 aperture to 8GB fails because the current
device-tree configuration for the PCIe C5 slot cannot support this.
Fix this by updating the device-tree 'reg' and 'ranges' properties for
the PCIe C5 slot to support this.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250116151903.476047-1-jonathanh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available
on this device family. It should not be used at all on Orin NX/Nano.
Having this unused pin mapped as the suspend key can lead to
unpredictable behavior for low power modes.
Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend"
button. However, we cannot have two gpio-keys mapped to the same
GPIO. Therefore remove the "suspend" key.
Cc: stable@vger.kernel.org
Fixes: e63472eda5ea ("arm64: tegra: Support Jetson Orin NX reference platform")
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Link: https://lore.kernel.org/r/20250206224034.3691397-1-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
armada-8040-clearfog-gt-8k.dtb: sata_reset: $nodename:0: 'sata_reset' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250219085726.70824-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250219085726.70824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Reorder properties to comply with the DeviceTree coding style guidelines:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-5-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
style
Reorder properties to comply with the DeviceTree coding style guidelines:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-4-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, Ethernet, uSD card, eMMC, and OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-3-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, USB (DFU), Ethernet, uSD card, eMMC, and
OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, USB (DFU), Ethernet, uSD card, eMMC, and
OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add DWI backlight controller nodes for Apple A11 SoC, and enable it for:
- iPhone 8
- iPhone 8 Plus
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250228-dwi-dt-v2-5-69e450bc4bfb@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add DWI backlight controller nodes for Apple A10 SoC, and enable it for:
- iPhone 7
- iPhone 7 Plus
- iPod touch 7
- iPad 6
- iPad 7
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250228-dwi-dt-v2-4-69e450bc4bfb@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add DWI backlight controller nodes for Apple A9 SoC, and enable it for:
- iPhone 6
- iPhone 6s
- iPhone SE
- iPad 5
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250228-dwi-dt-v2-3-69e450bc4bfb@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add DWI backlight controller nodes for Apple A8 SoC, and enable it for:
- iPhone 6
- iPhone 6 Plus
- iPad mini 4
- iPod touch 6
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250228-dwi-dt-v2-2-69e450bc4bfb@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add DWI backlight controller nodes for Apple A7 SoC, and enable it for
iPhone 5s.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250228-dwi-dt-v2-1-69e450bc4bfb@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DTS updates for v6.15
This adds new SoCs and new machines, other than improving support for
currently supported ones.
In particular, for SoCs:
- Airoha EN7581 gets support for its SCU clock controller, SPI NAND,
hardware RNG, pinctrl, and i2c controllers;
- MediaTek MT8365 SoC gets support for all of its Display Controller
components;
- MediaTek Genio 510 MT8370 - a lower binned variant of Genio 700
MT8390 (which, in turn, is the same as MT8188) - is introduced;
- MT8188 gets support for more Display Controller components (DSC
and MERGE), for the tertiary MSDC (eMMC/SD/SDIO) controller, and
for the MTU3 USB DRD controllers;
- MT8195 and MT8188 both get migrated to the new OF Graph used for
defining a pipeline for the Display Controller components (as
this was previously hardcoded per-board in the drm driver, ugh!);
..and for boards:
- Google Kukui (MT8183) is switched to Elan touchscreen driver
instead of hid-over-i2c to fix probe failures in some cases;
- Google Cherry (MT8195) and Geralt (MT8188) Chromebooks get
migrated to using OF Graph for defining their board specific
part of the display pipeline;
- MediaTek Genio 350 (mt8365) EVK board adds support for HDMI output
through the iTE IT66121 chip, and for DSI output to the Startek
KD070FHFID015 display;
- MediaTek Genio 510 EVK board is introduced with a common devicetree
between mt8390 and mt8370 (Genio 700 and Genio 510) EVKs;
- MediaTek Genio 700 (and 510) EVKs get support for their integrated
dual Digital Microphones, for their RichTek RT1715 USB Type-C
Controller with USB-PD capability, the iTE IT5205 Alternate Mode
Passive MUX (USB3.1/DP1.4), and for USB Gadget/Host switching
through the MTU3 DRD Controller, other than for USB in general;
- MediaTek Genio 1200 EVK gets support for its MediaTek MT6360 PMIC
integrated Type-C Controller, and the IT5205 MUX;
- Radxa NIO-12L gets its DSI display pipeline preconfigured and also
the introduction of a devicetree overlay for the official Radxa
8HD DSI panel, enabling display output over DSI.
And fixes/cleanups:
- MT8173 gets fixes for bindings validation: PMIC node drops the
unnecessary address/size cells, disp-pwm gets its compatibles
list fixed (as mt6595 was not expected there), and some nodes
got the right name (clock controllers were disguides as power
controllers, and intpol was changed to interrupt-controller);
- MT8188-based (MT8390) Genio boards get a fix for duplicated
regulator name;
- MT6359 PMIC gets fixes for audio-codec node validation.
* tag 'mtk-dts64-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (35 commits)
arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel
arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port
arm64: dts: mediatek: mt8390-genio-common: Add delay codec for DMIC
arm64: dts: mediatek: mt8390-genio-common: Add routes for DMIC
arm64: dts: mediatek: mt8395-nio-12l: Preconfigure DSI0 pipeline
arm64: mediatek: mt8195-cherry: Add graph for eDP and DP displays
arm64: dts: mediatek: mt8195: Add base display controller graph
arm64: dts: airoha: en7581: Fix clock-controller address
arm64: dts: airoha: en7581: Add more nodes to EN7581 SoC evaluation board
arm64: dts: mediatek: mt8390-genio-common: Configure touch vreg pins
arm64: dts: mediatek: mt8188-geralt: Add graph for DSI and DP displays
arm64: dts: mediatek: mt8188: Add base display controller graph
arm64: dts: mediatek: mt8390-genio-700: Add USB, TypeC Controller, MUX
arm64: dts: mediatek: mt8188: Add MTU3 nodes and correctly describe USB
dt-bindings: usb: mediatek,mtk-xhci: Add port for SuperSpeed EP
arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port
dt-bindings: usb: mtu3: Add ports property
arm64: dts: mediatek: mt8390-genio-common: Fix duplicated regulator name
arm64: dts: mediatek: mt8183: Switch to Elan touchscreen driver
arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec
...
Link: https://lore.kernel.org/r/20250306113540.148342-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"regulator-ramp-delay-scale" property
Remove "regulator-ramp-delay-scale" property which is both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305224952.2995841-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 FVP/Vexpress/Juno updates for v6.15
The main and bulk of the addition this time is the support for the Arm
reference Morello System Development Platform (SDP).
The Morello architecture is an experimental extension to Armv8.2-A,
enhancing the AArch64 execution state with capabilities for fine-grained
memory protection and scalable software compartmentalization. However
these changes doesn't add any of the support for security enhancements.
This is mainly adding device tree support for Morello SDP.
The platform iteslf is shipped with ACPI firmware. However, since the
ACPI bindings for GPU, DPU, I2C, I2S,..etc are not well defined or not
provided in the shipped ACPI firmware, there is a need for the device
tree as alternative for the developers focusing on those features.
The CPU is called rainier, the architecture is Morello and the platform
is Morello SDP board. There is FVP equivalent of the same though they
are not completely in feature parity with the real hardware.
These changes provide the initial support for Morello SDP and FVP
platforms.
Apart from this, we have an update to add support for secondary cores
on Corstone1000 FVP platform.
* tag 'juno-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: corstone1000: Add definitions for secondary CPU cores
MAINTAINERS: Add Vincenzo Frascino as Arm Morello Maintainer
arm64: dts: morello: Add support for fvp dts
arm64: dts: morello: Add support for soc dts
arm64: dts: morello: Add support for common functionalities
dt-bindings: arm-pmu: Add support for ARM Rainier PMU
dt-bindings: arm: Add Rainier compatibility
dt-bindings: arm: Add Morello fvp compatibility
dt-bindings: arm: Add Morello compatibility
arm64: Kconfig: Update description for CONFIG_ARCH_VEXPRESS
Link: https://lore.kernel.org/r/20250304105856.432848-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
Apple SoC DT updates for 6.15, second batch:
- Added a missing p-state for iPad mini 4
- Added SPI controller nodes for M1 and M2 devices
- Added SPI NOR flash nodes and NVRAM partitions
- Added touchbar digitizer nodes for M1 and M2 devices
* tag 'asahi-soc-dt-6.15-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: Add touchbar digitizer nodes
arm64: dts: apple: Add SPI NOR nvram partition to all devices
arm64: dts: apple: t600x: Add spi controller nodes
arm64: dts: apple: t8112: Add spi controller nodes
arm64: dts: apple: t8103: Add spi controller nodes
arm64: dts: apple: t8103: Fix spi4 power domain sort order
arm64: dts: apple: t7000: Add missing CPU p-state 7 for J96 and J97
Link: https://lore.kernel.org/r/20250302115808.59172-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
ARM: dts: renesas: r9a06g032: Fix UART dma channel order
arm64: dts: renesas: rzg2: Add boot phase tags
arm64: dts: renesas: rcar: Add boot phase tags
ARM: dts: renesas: rcar-gen2: Add boot phase tags
arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders
arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture
arm64: dts: renesas: Add initial support for MYIR Remi Pi
arm64: dts: renesas: r9a08g045: Add OPP table
arm64: dts: renesas: r9a09g057: Enable SYS node
arm64: dts: renesas: r9a09g047: Add SYS node
arm64: dts: renesas: r9a08g045: Enable SYS node
arm64: dts: renesas: r8a779f0: Disable rswitch ports by default
arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch
arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch
arm64: dts: renesas: s4sk: Access rswitch ports via phandles
arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles
...
Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable Mali-G31 (GPU) node on EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250218115922.407816-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add Mali-G31 GPU node to SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250218115922.407816-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.14, please pull the following:
- Phil fixes the Raspberry Pi 5 PL011 UART primecell ID to indicate it
is r1p5 and thus has a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
Link: https://lore.kernel.org/r/20250225194041.1063762-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
MNT Reform 2 is an open source laptop with replaceable CPU modules,
including a version with the RK3588-based MNT RCORE[1], which is based
on Firefly's iCore-3588Q SoM:
- Rockchip RK3588
- Quad A76 and Quad A55 CPU
- 6 TOPS NPU
- up to 32GB LPDDR4x RAM
- SD Card slot
- Gigabit ethernet port
- HDMI port
- 2x mPCIe ports for WiFi or NVMe
- 3x USB 3.0 Type-A HOST port
[1] https://shop.mntre.com/products/mnt-reform
Co-developed-by: "Lukas F. Hartmann" <lukas@mntre.com>
Signed-off-by: "Lukas F. Hartmann" <lukas@mntre.com>
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Link: https://lore.kernel.org/r/Z8S6uDM634KJuyKP@windev.fritz.box
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Radxa 8 HD touchscreen can be used with various Radxa board
and is sold appart from the Radxa NIO 12L development kit.
Add a DTS overlay for this panel.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250304-radxa-panel-overlay-v2-2-3ee6797d3f86@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This board can use a MIPI-DSI panel on the DSI0 connector: in
preparation for adding an overlay for the Radxa Display 8HD,
add the backlight, and some definitions for pins available
through the DSI0 port.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250304-radxa-panel-overlay-v2-1-3ee6797d3f86@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The signal from the dual digital microphones connected to the DMIC_BE
takes 30ms to settle after being enabled. Add a dmic-codec with
corresponding wakeup-delay-ms to prevent an initial "pop" sound when
recording with the microphones.
Co-developed-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-8-3076f5b50ef7@collabora.com
[Angelo: Resolved merge conflicts]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add necessary routes for the onboard dual DMIC present on the Genio
700/510 EVK. The dmic is supplied by micbias0 and micbias2, and inputs
into the MT8188 DMIC DAI.
Co-developed-by: parkeryang <Parker.Yang@mediatek.com>
Signed-off-by: parkeryang <Parker.Yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-6-3076f5b50ef7@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This board can use a MIPI-DSI panel on the DSI0 connector: in
preparation for adding an overlay for the Radxa Display 8HD,
add a pipeline connecting VDOSYS0 components to DSI0.
This pipeline remains disabled by default, as it is expected
to be enabled only by a devicetree overlay that declares the
actual DSI panel node, completing the graph.
Link: https://lore.kernel.org/r/20250213112008.56394-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The base SoC devicetree now defines a display controller graph:
connect the board specific outputs (eDP internal display, DP
external display) to fully migrate Cherry and make it finally
possible to make Chromebooks and other board types to coexist
without per-board driver modifications.
Link: https://lore.kernel.org/r/20250213112008.56394-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
