summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-08-17Merge tag 'qcom-arm64-fixes-for-6.5' of ↵Arnd Bergmann7-24/+28
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 fixes for v6.5 This corrects the invalid path specifier for L3 interconnects in the CPU nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3 node, to pass the binding check. The crypto core, and its DMA controller, is disabled on SM8350 to avoid the system from crashing at boot while the issue is diagnosed. A thermal zone node name conflict is resolved for PM8150L, on the RB5 board. The UFS vccq voltage is corrected on the SA877P Ride platform, to address observed stability issues. The reg-names of the DSI phy on SC7180 are restored after an accidental search-and-replace update. * tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names arm64: dts: qcom: sa8775p-ride: Update L4C parameters arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot arm64: dts: qcom: sc8180x: Fix OSM L3 compatible arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-17Merge tag 'v6.5-rockchip-dtsfixes1' of ↵Arnd Bergmann27-69/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4, disabled hs400 speeds for some boards having problems with data intergrity and some dt property/styling fixes. * tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards arm64: dts: rockchip: minor whitespace cleanup around '=' arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+ arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4 arm64: dts: rockchip: add missing space before { on indiedroid nova arm64: dts: rockchip: correct wifi interrupt flag in Box Demo arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610 arm64: dts: rockchip: Drop invalid regulator-init-microvolt property Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'imx-fixes-6.5-2' of ↵Arnd Bergmann3-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5, 2nd round: - Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU memory area. - Fix RTC interrupt level on imx6qdl-phytec-mira board. - Remove LDB endpoint from from the common imx6sx.dtsi as it causes regression for boards that has the LCDIF connected directly to a parallel display. - Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree to avoid overclocking. - Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix a tuning failure seen with some SD cards. * tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx93: Fix anatop node size ARM: dts: imx: Set default tuning step for imx6sx usdhc arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration ARM: dts: imx: Set default tuning step for imx7d usdhc ARM: dts: imx6: phytec: fix RTC interrupt level ARM: dts: imx6sx: Remove LDB endpoint Link: https://lore.kernel.org/r/20230809100034.GS151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-06arm64: dts: imx93: Fix anatop node sizeAlexander Stein1-1/+1
Although the memory map of i.MX93 reference manual rev. 2 claims that analog top has start address of 0x44480000 and end address of 0x4448ffff, this overlaps with TMU memory area starting at 0x44482000, as stated in section 73.6.1. As PLL configuration registers start at addresses up to 0x44481400, as used by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area but keep all PLL registers inside. Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-31arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-namesKonrad Dybcio1-2/+2
Commit 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes") broke reg-names, possibly with search-and-replace. Fix it. Fixes: 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-30arm64: dts: imx8mm: Drop CSI1 PHY reference clock configurationFabio Estevam1-4/+3
The CSI1 PHY reference clock is limited to 125 MHz according to: i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020 Table 5-1. Clock Root Table (continued) / page 307 Slice Index n = 123 . Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop the configuration altogether, which defaults the clock to 24 MHz REF clock input, which for the PHY reference clock is just fine. Based on a patch from Marek Vasut for the imx8mn. Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30arm64: dts: imx8mn: Drop CSI1 PHY reference clock configurationMarek Vasut1-4/+2
The CSI1 PHY reference clock are limited to 125 MHz according to: i.MX 8M Nano Applications Processor Reference Manual, Rev. 2, 07/2022 Table 5-1. Clock Root Table (continued) / page 319 Slice Index n = 123 . Currently those IMX8MN_CLK_CSI1_PHY_REF clock are configured to be fed directly from 1 GHz PLL2 , which overclocks them . Instead, drop the configuration altogether, which defaults the clock to 24 MHz REF clock input, which for the PHY reference clock is just fine. Fixes: ae9279f301b5 ("arm64: dts: imx8mn: Add CSI and ISI Nodes") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-27Merge tag 'socfpga_dts_fix_for_v6.5' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA dts fix for v6.5 - Fix incorrect I2C property for SCL signal * tag 'socfpga_dts_fix_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix incorrect I2C property for SCL signal Link: https://lore.kernel.org/r/20230724145617.887443-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-27Merge tag 'renesas-fixes-for-v6.5-tag1' of ↵Arnd Bergmann2-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v6.5 - Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. * tag 'renesas-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels Link: https://lore.kernel.org/r/cover.1690463347.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-27Merge tag 'imx-fixes-6.5' of ↵Arnd Bergmann6-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action * tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-25arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channelsBiju Das2-16/+16
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow interrupt names start with 'tci' instead of 'tgi'. Replace the below overflow/underflow interrupt names: - tgiv0->tciv0 - tgiv1->tciv1 - tgiu1->tciu1 - tgiv2->tciv2 - tgiu2->tciu2 - tgiv3->tciv3 - tgiv4->tciv4 - tgiv6->tciv6 - tgiv7->tciv7 - tgiv8->tciv8 - tgiu8->tciu8 Fixes: 26336d66d021 ("arm64: dts: renesas: r9a07g044: Add MTU3a node") Fixes: dd123dd01def ("arm64: dts: renesas: r9a07g054: Add MTU3a node") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230724091927.123847-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-07-24arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boardsYogesh Hegde1-1/+1
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on ROCK Pi 4 boards. Commit f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards") introduced a problem with the clock configuration. Specifically, the clock-names property of the sdio-pwrseq node was not updated to 'lpo', causing the driver to wait indefinitely for the wrong clock signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards. To address this, this patch updates the clock-names property of the sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node. This patch has been tested on ROCK Pi 4B. Fixes: f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards") Cc: stable@vger.kernel.org Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com> Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14 Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-18arm64: dts: freescale: Fix VPU G2 clockBenjamin Gaignard1-1/+1
Set VPU G2 clock to 300MHz like described in documentation. This fixes pixels error occurring with large resolution ( >= 2560x1600) HEVC test stream when using the postprocessor to produce NV12. Fixes: 4ac7e4a81272 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmuxHugo Villeneuve1-1/+1
For SOMs with an onboard PHY, the RESET_N pull-up resistor is currently deactivated in the pinmux configuration. When the pinmux code selects the GPIO function for this pin, with a default direction of input, this prevents the RESET_N pin from being taken to the proper 3.3V level (deasserted), and this results in the PHY being not detected since it is held in reset. Taken from RESET_N pin description in ADIN13000 datasheet: This pin requires a 1K pull-up resistor to AVDD_3P3. Activate the pull-up resistor to fix the issue. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: phycore-imx8mm: Correction in gpio-line-namesYashwanth Varakala2-2/+2
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees. Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: phycore-imx8mm: Label typo-fix of VPUYashwanth Varakala1-1/+1
Corrected the label of the VPU regulator node (buck 3) from reg_vdd_gpu to reg_vdd_vpu. Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-17arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrlTim Harvey1-0/+4
The GW7904 does not connect the VDD_MIPI power rails thus MIPI is disabled. However we must also disable disp_blk_ctrl as it uses the pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will fail to probe: imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi" imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110 Fixes: b999bdaf0597 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-17arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrlTim Harvey1-0/+4
The GW7903 does not connect the VDD_MIPI power rails thus MIPI is disabled. However we must also disable disp_blk_ctrl as it uses the pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will fail to probe: imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi" imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110 Fixes: a72ba91e5bc7 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-14arm64: dts: qcom: sa8775p-ride: Update L4C parametersNaveen Kumar Goud Arepalli1-2/+2
L4c is the supply for UFS vccq, As per UFS spec range of vccq is 1.14V to 1.26V, There are stability issues when operating at marginal voltage. Hence configure the min and max vccq voltages to 1.2V. Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230711105915.30581-1-quic_narepall@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-13arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlinkSudeep Holla1-1/+0
Commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") moved all arm vendor specific DTS into the sub-directory and updated vexpress-v2f-1xv7-ca53x2.dts accordingly to include vexpress-v2m-rs1.dtsi from the right path. However the symlink was left dangling which is harmless and causes no issue for the build. Just remove the dangling symlink now that it is noticed and reported. Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Avram Lubkin <avram@rockhopper.net> Reported-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/r/20230706085534.300828-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-07-11arm64: dts: stratix10: fix incorrect I2C property for SCL signalDinh Nguyen2-2/+2
The correct dts property for the SCL falling time is "i2c-scl-falling-time-ns". Fixes: c8da1d15b8a4 ("arm64: dts: stratix10: i2c clock running out of spec") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2023-07-10arm64: dts: rockchip: minor whitespace cleanup around '='Krzysztof Kozlowski3-11/+11
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+Christopher Obbard1-2/+1
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running in HS400 mode. This ends up resulting in some block errors after a while or after a "heavy" operation utilising the eMMC (e.g. resizing a filesystem). An example of these errors is as follows: [ 289.171014] mmc1: running CQE recovery [ 290.048972] mmc1: running CQE recovery [ 290.054834] mmc1: running CQE recovery [ 290.060817] mmc1: running CQE recovery [ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0 [ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466) [ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288 [ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289 [ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290 [ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291 [ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292 [ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293 [ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294 [ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295 [ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296 [ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297 Disabling the Command Queue seems to stop the CQE recovery from running, but doesn't seem to improve the I/O errors. Until this can be investigated further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O errors from occurring. Fixes: 246450344dad ("arm64: dts: rockchip: rk3399: Radxa ROCK 4C+") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Link: https://lore.kernel.org/r/20230705144255.115299-3-chris.obbard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4Christopher Obbard1-2/+2
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running in HS400 mode. This ends up resulting in some block errors after a while or after a "heavy" operation utilising the eMMC (e.g. resizing a filesystem). An example of these errors is as follows: [ 289.171014] mmc1: running CQE recovery [ 290.048972] mmc1: running CQE recovery [ 290.054834] mmc1: running CQE recovery [ 290.060817] mmc1: running CQE recovery [ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0 [ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466) [ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288 [ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289 [ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290 [ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291 [ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292 [ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293 [ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294 [ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295 [ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296 [ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297 Disabling the Command Queue seems to stop the CQE recovery from running, but doesn't seem to improve the I/O errors. Until this can be investigated further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O errors from occurring. While we are here, set the eMMC maximum clock frequency to 1.5MHz to follow the ROCK 4C+. Fixes: 1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Tested-By: Folker Schwesinger <dev@folker-schwesinger.de> Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: add missing space before { on indiedroid novaKrzysztof Kozlowski1-4/+4
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230705145859.293260-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: correct wifi interrupt flag in Box DemoKrzysztof Kozlowski1-1/+1
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707063335.13317-3-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4BKrzysztof Kozlowski1-1/+1
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Christopher Obbard <chris.obbard@collabora.com> Link: https://lore.kernel.org/r/20230707063335.13317-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610Krzysztof Kozlowski1-1/+1
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707063335.13317-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: rockchip: Drop invalid regulator-init-microvolt propertyCristian Ciocaltea19-46/+0
The 'regulator-init-microvolt' property is not currently supported by any driver, it was simply carried on from downstream kernels. The problem is also indicated by the following dtbs_check warning: rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected) Remove the invalid property from all affected DTS files. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-07-10arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflictDmitry Baryshkov1-1/+1
The commit 3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal" suffix for thermal zones") renamed the thermal zone in the pm8150l.dtsi file to comply with the schema. However this resulted in a clash with the RB5 board file, which already contained the pm8150l-thermal zone for the on-board sensor. This resulted in the board file definition overriding the thermal zone defined in the PMIC include file (and thus the on-die PMIC temp alarm was not probing at all). Rename the thermal zone in qcom/qrb5165-rb5.dts to remove this override. Fixes: 3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal" suffix for thermal zones") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230613131224.666668-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-10arm64: dts: qcom: sm8350: fix BAM DMA crash and rebootKrzysztof Kozlowski1-0/+4
SM8350 HDK and MTP boards were silently dying and rebooting during BAM DMA probe, probably during reading BAM_REVISION register: [ 1.574304] vreg_bob: Setting 3008000-3960000uV [ 1.576918] bam-dFormat: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.MXF.1.0-00637.1-LAHAINA-1 S - IMAGE_VARIANT_STRING=SocLahainaLAA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu77 S - Boot Interface: UFS It seems that BAM DMA is not yet operational, thus mark it as failed and disable also QCE because it won't work without BAM DMA. Fixes: f1040a7fe8f0 ("arm64: dts: qcom: sm8350: Add Crypto Engine support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-10arm64: dts: qcom: sc8180x: Fix OSM L3 compatibleKrzysztof Kozlowski1-1/+1
Since commit c70edc067739 ("dt-bindings: interconnect: Add sm8350, sc8280xp and generic OSM L3 compatibles") OSM L3 compatible should have generic fallback: sc8180x-primus.dtb: interconnect@18321000: compatible: 'oneOf' conditional failed, one must be fixed: Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230617204118.61959-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-10arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cellsKrzysztof Kozlowski1-9/+9
Qualcomm EPSS L3 Interconnect does not take path (third) argument. This was introduced by commit b5a12438325b ("arm64: dts: qcom: sm8250: Use 2 interconnect cells") which probably wanted to use 2 cells only for RPMh interconnects. sm8250-hdk.dtb: interconnect@18590000: #interconnect-cells:0:0: 1 was expected Fixes: b5a12438325b ("arm64: dts: qcom: sm8250: Use 2 interconnect cells") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230617204118.61959-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-10arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cellsKrzysztof Kozlowski1-9/+9
Qualcomm Operating State Manager (OSM) L3 Interconnect does not take path (third) argument. This was introduced by commit 97c289026c62 ("arm64: dts: qcom: sm8150: Use 2 interconnect cells") which probably wanted to use 2 cells only for RPMh interconnects. sm8150-microsoft-surface-duo.dtb: interconnect@18321000: #interconnect-cells:0:0: 1 was expected Fixes: 97c289026c62 ("arm64: dts: qcom: sm8150: Use 2 interconnect cells") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230617204118.61959-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-30Merge tag 'soc-newsoc-6.5' of ↵Linus Torvalds17-0/+1000
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ...
2023-06-30Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds453-5036/+38517
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-23Merge tag 'qcom-arm64-fixes-for-6.4-2' of ↵Arnd Bergmann5-2/+17
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One last Qualcomm ARM64 DeviceTree fix for v6.4 Changes related to cache management for DMA memory caused WiFi to stop work on SC7180 and SC7280 based products, using TF-A. These changes marks the relevant device dma-coherent to correct the behavior. * tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-22arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devicesDouglas Anderson2-1/+6
Just like for sc7180 devices using the Chrome bootflow (AKA trogdor and IDP), sc7280 devices using the Chrome bootflow also need their firmware marked dma-coherent. On sc7280 this wasn't causing WiFi to fail to startup, since WiFi works differently there. However, on sc7280 devices we were still getting the message at bootup after commit 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"""): qcom_scm firmware:scm: Assign memory protection call failed -22 qcom_rmtfs_mem 9c900000.memory: assign memory failed qcom_rmtfs_mem: probe of 9c900000.memory failed with error -22 We should mark SCM properly just like we did for trogdor. Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""") Fixes: 7a1f4e7f740d ("arm64: dts: qcom: sc7280: Add basic dts/dtsi files for sc7280 soc") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230616081440.v2.4.I21dc14a63327bf81c6bb58fe8ed91dbdc9849ee2@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdorDouglas Anderson1-0/+5
Trogdor devices use firmware backed by TF-A instead of Qualcomm's normal TZ. On TF-A we end up mapping memory as cacheable. Specifically, you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE. Apparently Qualcomm's normal TZ implementation maps the memory as non-cacheable. Let's add the "dma-coherent" attribute to the SCM for trogdor. Adding "dma-coherent" like this fixes WiFi on sc7180-trogdor devices. WiFi was broken as of commit 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"""). Specifically at bootup we'd get: qcom_scm firmware:scm: Assign memory protection call failed -22 qcom_rmtfs_mem 94600000.memory: assign memory failed qcom_rmtfs_mem: probe of 94600000.memory failed with error -22 From discussion on the mailing lists [2] and over IRC [3], it was determined that we should always have been tagging the SCM as dma-coherent on trogdor but that the old "invalidate" happened to make things work most of the time. Tagging it properly like this is a much more robust solution. [1] https://chromium.googlesource.com/chromiumos/third_party/arm-trusted-firmware/+/refs/heads/firmware-trogdor-13577.B/plat/qti/common/src/qti_syscall.c [2] https://lore.kernel.org/r/20230614165904.1.I279773c37e2c1ed8fbb622ca6d1397aea0023526@changeid [3] https://oftc.irclog.whitequark.org/linux-msm/2023-06-15 Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""") Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230616081440.v2.3.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDPDouglas Anderson2-1/+6
sc7180-idp is, for most intents and purposes, a trogdor device. Specifically, sc7180-idp is designed to run the same style of firmware as trogdor devices. This can be seen from the fact that IDP has the same "Reserved memory changes" in its device tree that trogdor has. Recently it was realized that we need to mark SCM as dma-coherent to match what trogdor's style of firmware (based on TF-A) does [1]. That means we need this dma-coherent tag on IDP as well. Without this, on newer versions of Linux, specifically those with commit 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"""), WiFi will fail to work. At bootup you'll see: qcom_scm firmware:scm: Assign memory protection call failed -22 qcom_rmtfs_mem 94600000.memory: assign memory failed qcom_rmtfs_mem: probe of 94600000.memory failed with error -22 [1] https://lore.kernel.org/r/20230615145253.1.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""") Fixes: f5ab220d162c ("arm64: dts: qcom: sc7180: Add remoteproc enablers") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230616081440.v2.2.I3c17d546d553378aa8a0c68c3fe04bccea7cba17@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring21-21/+21
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21Merge tag 'arm-soc/for-6.5/devicetree-arm64' of ↵Arnd Bergmann11-26/+42
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs changes for 6.5, please pull the following: - Krzysztof fixes the BCMBCA DTS files to have correct cache properties - Tony unifies the pinctrl-single pin group(s) for the Stingray SoCs - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays * tag 'arm-soc/for-6.5/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Enable device-tree overlay support for RPi devices arm64: dts: broadcom: Unify pinctrl-single pin group nodes for stingray arm64: dts: broadcom: add missing cache properties Link: https://lore.kernel.org/r/20230619134920.3384844-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'mvebu-dt64-6.5-1' of ↵Arnd Bergmann8-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.5 (part 1) Few improvements following the dt bindings: - add missing cache properties - fix nand_controller node name according to YAML - fix pca954x i2c-mux node names Fix espressobin-ultra boot failure and wifi for EspressoBIN Ultra (Armada 3720) * tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Fix espressobin-ultra boot failure and wifi arm64: dts: marvell: Fix pca954x i2c-mux node names arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML arm64: dts: marvell: add missing cache properties Link: https://lore.kernel.org/r/877cs3h87m.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'v6.4-next-dts64' of ↵Arnd Bergmann45-20/+2223
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT6795: - add GCE, MMSYS, IOMMU and PMIC wrapper nodes - Enable PMIC combo, eMMC and SDIO support to the Sony Xperia M5 MT7622: - add SPI-NAND chip and interrupt support for switch node to the BPI-R64 MT7986: - add PWM, thermal, efuse, auxadc and thermal zone nodes - BPI-R3 enable WiFi leds and enable PWM - BPI-R3 reserve more space on NOR and NOR flash to be able to store bl2 uncompressed - BPI-R3 add PWM fan for cpu cooling MT8173: - fine tune the regulator of the eDP pannel - use EDID for eDP panel instead of hard coded type MT8183: - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - provide fimrware name to SCP MT8186: - add USB, SPMI, ADSP, Global Command Engine (GCE) nodes - add nodes to enable display support - add cache coherent interconnect - add dynamic voltage scaling for CPU and GPU MT8192: - enable Bluetooth on the Hayato board - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - add cpufreq node and video decoder - add dma-ranges needed by the IOMMU rework - Fine tune capacity-dmips-mhz MT8195: - add thermal zones and video decoder - enable PCI ports on cherry (e.g. Acer Chromebook Spin 513 CP513-2H) to enable WiFi and Bluetooth combo. - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work MT8365: - add watchdog, PMIC, MMC, USB OTG, ethernet nodes - add Operation Performance Points - PSCI node and CPU idle support Several SoCs: - advertise L2 and L3 cache as unified - add chasss-type * tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (51 commits) arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3 arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts arm64: dts: mt7986: add thermal-zones arm64: dts: mt7986: add thermal and efuse arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz arm64: dts: mediatek: mt8192: Add missing dma-ranges to soc node arm64: dts: mediatek: mt8183: kukui: Add scp firmware-name arm64: dts: mt8195: Add video decoder node arm64: dts: mt8192: Add video-codec nodes arm64: dts: mediatek: Add cpufreq nodes for MT8192 arm64: dts: mediatek: mt8173-elm: remove panel model number in DT arm64: dts: mt7986: use size of reserved partition for bl2 arm64: dts: mt8173: Power on panel regulator on boot arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3 arm64: dts: mt7986: add PWM to BPI-R3 arm64: dts: mt7986: add PWM ... Link: https://lore.kernel.org/r/27843c96-142e-930e-33b2-b634182e7cfa@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-arm64-for-6.5-2' of ↵Arnd Bergmann97-1835/+4193
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 DTS changes for v6.5 This introduces support for the Qualcomm SDX75 platform, with the IDP reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the RDP454 is introduced. On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added. For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added to the CPU cluster power-domain to flush sleep & wake votes as the cluster goes down. On IPQ5332 additional reserved-memory regions to improve post mortem debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the RDP474 is added. On IPQ8074 critical thermal trip points are defined. As with IPQ5332 additional reserved-memory regions are used to improve post mortem debugging. Thermal sensors (tsens) are added and zones defined. The crypto engine is added, and support for the RDP454 board is added. Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and the purpose of msm8939-pm8916 is documented. MSM8939 has regulator definitions cleaned up, following to the previous effort on MSM8916. CPU Bus Fabric scaling support is added to MSM8996 Pro. On QCM2290 CPU idle states are added. For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC support. IMEM and PIL information regions are defined for improved post mortem debugging. The Qualcomm Robotics RB2 kit gets its on-board buttons described. A few fixes are introduced for the newly merged SC8180X, in particluar the DisplayPort blocks are moved to the MMCX power domain to avoid power being reduced prematurely during boot. The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s, and resets for the soundwire controllers are added. The OUI is specified for ethernet phys on SA8540P Ride platform, to avoid reset issues. Charger description is added to the PMI8998 PMIC and enabled across OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1. On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU clock controller and IOMMU definitions. The Fairphone FP4 gains Bluetooth support. SM8150 is transitioned to use 2 interconnect-cells, and the USB interconnect path is described to ensure buses are adequately voted for. The same changes are done for SM8250, and the resolution of the static framebuffer on Sony Xperia 1 II and 5 II are corrected. The USB bus paths are also added to SM8350, SM8450 and SM8550. On SM8550 DisplayPort nodes are added, as is the PWM controller for driving the notification LED and the RTC is enabled. For the MTP and QRD boards, the soundcard and audio codecs are defined. A Tegra change, related to LP855X binding changes, was accidentally picked up and dropped again later. A number of DeviceTree fixes identified through validation was introduced as well. Additionally a few nodes got their default status changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu node). * tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits) Revert "arm64: dts: adapt to LP855X bindings changes" arm64: dts: qcom: sc8280xp: Enable GPU related nodes arm64: dts: qcom: sc8280xp: Add GPU related nodes arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators arm64: dts: qcom: msm8939: Define regulator constraints next to usage arm64: dts: qcom: msm8939-pm8916: Clarify purpose arm64: dts: qcom: msm8939: Fix regulator constraints arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6 arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages arm64: dts: qcom: msm8939: Disable lpass_codec by default arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl arm64: dts: qcom: msm8996: rename labels for HDMI nodes arm64: dts: qcom: sm8250: rename labels for DSI nodes ... Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'ti-k3-dt-for-v6.5' of ↵Arnd Bergmann78-861/+8688
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.5 New Boards: phyBOARD-Lyra-AM625 Board support Toradex Verdin AM62 COM, carrier and dev boards New features: Across K3 SoCs: - Error Signaling Module(ESM) and Secproxy IPC modules - On board I2C EEPROM - Voltage Temp Monitoring (VTM) module - DM timers (GP Timers) J784s4: - R5 and C7x DSP remoteproc, ADC, QSPI AM69: - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al J721s2: - USB, Serdes, OSPI, PCIe AM62a: - Watchdog J721e: - HyperFlash/HyperBus AM62: - Type-C USB0 port Cleanups and non-urgent fixes Particularly large set of cleanups to get rid of dtbs_check errors and dtc warnings: - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A, J721e, J7200 that are used by bootloader - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4 - Drop bootargs and unneeded aliases across all K3 SoCs - Move aliases to board dts files from SoC dtsi files - Move to generic node name for can, rtc nodes on am65 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update - Fix pinctrl phandle references to use <> as separator where multiple entries are present * tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits) arm64: dts: ti: Unify pin group node names for make dtbs checks arm64: dts: ti: add verdin am62 yavia arm64: dts: ti: add verdin am62 dahlia arm64: dts: ti: add verdin am62 dt-bindings: arm: ti: add toradex,verdin-am62 et al. arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am64: Add ESM support arm64: dts: ti: k3-am62: Add ESM support arm64: dts: ti: k3-j7200: Add ESM support arm64: dts: ti: k3-j721e: Add ESM support dt-bindings: misc: esm: Add ESM support for TI K3 devices arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header arm64: dts: ti: k3-j721s2: Fix wkup pinmux range ... Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann25-208/+596
soc/dt arm64: ZynqMP DT changes for v6.5 Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings * tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits) dt-bindings: usb: xilinx: Replace Manish by Piyush dt-bindings: xilinx: Remove Rajan, Jolly and Manish arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add pmu interrupt-affinity arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Fix usb node drive strength and slew rate arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Switch to amd.com emails arm64: zynqmp: Convert kv260-revA overlay to ASCII text dt-bindings: xilinx: Switch xilinx.com emails to amd.com arm64: xilinx: Use zynqmp prefix for SOM dt overlays arm64: zynqmp: Add phase tags marking arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Add gpio labels for modepin gpio ... Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controllerSam Protsenko1-1/+0
As described in the corresponding binding documentation for "samsung,exynos850-pmu", the "clocks" property should be used for specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850 pmu_system_controller is incorrect and should be removed. Instead of making syscon regmap keep that clock running for PMU accesses, it should be made always running in the clock driver, because the kernel is not the only software accessing PMU registers on Exynos850 platform. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'v6.5-rockchip-dts64-1' of ↵Arnd Bergmann15-18/+2758
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are - Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. * tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: Add saradc node to rock5b arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic arm64: dts: rockchip: Add SD card support to rock-5b arm64: dts: rockchip: add PMIC to rock-5b arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b arm64: dts: rockchip: Add Indiedroid Nova board dt-bindings: arm: rockchip: Add Indiedroid Nova dt-bindings: vendor-prefixes: add Indiedroid arm64: dts: rockchip: Add sdio node to rk3588 arm64: dts: rockchip: add default pinctrl for rk3588 emmc arm64: dts: rockchip: Add DT node for ADC support in RK3588 arm64: dts: rockchip: add PMIC to rk3588-evb1 arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM arm64: dts: rockchip: Add Rockchip RK3588J dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B arm64: dts: rockchip: Add RGA2 support to rk356x media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga arm64: dts: rockchip: Add rk3588 OTP node arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus ... Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-arm64-for-6.5' of ↵Arnd Bergmann103-2029/+15715
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 11:25:57 +0300