summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-05-16arm64: xilinx: Use zynqmp prefix for SOM dt overlaysMichal Simek1-8/+8
U-Boot is using zynqmp- prefix to compose DT name for board detection that's why also generate DT in this format in the kernel. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/49c1b8c992929610ba17b9c6edf5d40d4b28d2ed.1683033163.git.michal.simek@amd.com
2023-05-12arm64: zynqmp: Change zc1275 board name to zcu1275Michal Simek1-1/+1
Internal board zc1275 was released also to public which ends up with adding missing 'u' to board name. Reflect this change by renaming DT files. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9b50c72c4e634b2c72758eed6275920eedbda06f.1683099606.git.michal.simek@amd.com
2021-09-29arm64: zynqmp: Add support for Xilinx Kria SOM boardMichal Simek1-0/+13
There are couple of revisions of SOMs (k26) and associated carrier cards (kv260). SOM itself has two major versions: sm-k26 - SOM with EMMC smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware in QSPI. SOMs are describing only devices available on the SOM or connections which are described in specification (for example UART, fwuen). When SOM boots out of QSPI it uses limited number of peripherals defined by the specification and present in sm(k)-k26 dtses. Then a carrier card (CC) detection is happening and DT overlay is applied to brings new functionality. That's why DT overlays are used. The name is composed together with SOM name and CC name that's why DT overlays with these names are generated to make sure they can be used together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add support for zcu102-rev1.1 boardMichal Simek1-0/+1
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory which requires different configuration. The reason for adding this file to Linux kernel is that U-Boot fdtfile variable is composed based on board revision (in eeprom) and dtb file should exist in standard distibutions for passing it to Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add description for zcu104 revCMichal Simek1-0/+1
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c structure compare to revA. The rest of the board is the same from software perspective. Also enable DMAs and QSPI. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
2018-07-19arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 boardMichal Simek1-0/+1
Avnet Ultra96 rev1 board is commercialized Xilinx zcu100 revC/D internal board. The patch is reusing zcu100 revC files but changing model description and compatible strings which are used for example by libmraa. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm64: dts: zynqmp: Remove ep108 boardMichal Simek1-1/+0
ZynqMP Emulation board is no longer tested and there is no reason to keep maintaining it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-08arm64: zynqmp: Add support for Xilinx zc1751Michal Simek1-0/+5
Xilinx zc1751 boards is used for silicon validation. Board can be extended with 5 FMCs/DCs cards to connect various IPs. Describe all these combinations. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zc12XX boardsMichal Simek1-0/+3
These 3 boards requires minimal support to get Linux up and running. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zcu111-revAMichal Simek1-0/+1
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zcu106-revAMichal Simek1-0/+1
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zcu104-revAMichal Simek1-0/+1
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zcu102Michal Simek1-0/+3
This patch is adding revA, revB and rev1.0. There are also other revisions between which should be backward compatible with previous versions. Unfortunately all revs are still in use. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-03-08arm64: zynqmp: Add support for Xilinx zcu100-revCMichal Simek1-0/+1
This board has 2GB of memory, i2c, sd, wifi sdio, spis, uarts, display port and usbs. Board is using fixed clocks because clock driver hasn't been merged yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-23arm64: zynqmp: Add SPDX license identifierMichal Simek1-0/+1
Add SPDX identifier as was done by for example by: "License cleanup: add SPDX GPL-2.0 license identifier to files with no license" (commit <b24413180f5600bcb3bb70fbed5cf186b60864bd>) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-10kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada1-3/+0
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada1-1/+0
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-12ARM64: Add new Xilinx ZynqMP SoCMichal Simek1-0/+5
Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 17:15:41 +0300