summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom
AgeCommit message (Collapse)AuthorFilesLines
2024-07-30arm64: dts: qcom: x1e80100-vivobook-s15: disable PCIe6a perst pull downJohan Hovold1-1/+1
Disable the PCIe6a perst pull-down resistor to save some power. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-8-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-vivobook-s15: fix up PCIe6a pinctrl nodeJohan Hovold1-1/+1
The PCIe6a pinctrl node appears to have been copied from the sc8280xp CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a. Fix up the node name to match the x1e80100 use and label. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-vivobook-s15: fix PCIe4 PHY supplyJohan Hovold1-1/+8
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference design so assume the same applies to the Asus Vivobook S15. Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpiosJohan Hovold1-0/+29
Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config. Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support") Cc: stable@vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-5-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-qcp: disable PCIe6a perst pull downJohan Hovold1-1/+1
Disable the PCIe6a perst pull-down resistor to save some power. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-qcp: fix up PCIe6a pinctrl nodeJohan Hovold1-6/+6
The PCIe6a pinctrl node appears to have been copied from the sc8280xp CRD dts, which has the NVMe on pcie2a and uses some funny indentation. Fix up the node name to match the x1e80100 use and label and use only tabs for indentation. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-qcp: fix PCIe4 PHY supplyJohan Hovold1-1/+1
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD so assume the same applies to the QCP. Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support") Cc: stable@vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpiosJohan Hovold1-0/+29
Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Cc: stable@vger.kernel.org # 6.9 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240722094249.26471-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-crd: disable PCIe6a perst pull downJohan Hovold1-1/+1
Disable the PCIe6a perst pull-down resistor to save some power. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240722094249.26471-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl nodeJohan Hovold1-6/+6
The PCIe6a pinctrl node appears to have been copied from the sc8280xp CRD dts, which has the NVMe on pcie2a and uses some funny indentation. Fix up the node name to match the x1e80100 use and label and use only tabs for indentation. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240722094249.26471-5-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100: add missing PCIe minimum OPPJohan Hovold1-0/+2
Add the missing PCIe CX performance level votes to avoid relying on other drivers (e.g. USB) to maintain the nominal performance level required for Gen3 speeds. Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes") Cc: stable@vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722094249.26471-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100: fix PCIe domain numbersJohan Hovold1-2/+2
The current PCIe domain numbers are off by one and do not match the numbers that the UEFI firmware (and Windows) uses. Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes") Cc: stable@vger.kernel.org # 6.9 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240722094249.26471-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-30arm64: dts: qcom: x1e80100-crd: fix PCIe4 PHY supplyJohan Hovold1-1/+1
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j). Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Cc: stable@vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240722094249.26471-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: ipq5332: Fix interrupt trigger type for usbVaradarajan Narayanan1-2/+2
Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not supported for SPIs and results in probe failure with -EINVAL. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Fixes: 927173bf8a0e ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240723100151.402300-3-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: x1e80100-yoga: add wifi calibration variantPatrick Wildt2-0/+19
Describe the bus topology for PCIe domain 4 and add the ath12k calibration variant so that the board file (calibration data) can be loaded. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/ZpV7OeGNIGGpqNC0@windev.fritz.box Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sc8280xp-x13s: clean up PCIe2a pinctrl nodeJohan Hovold1-5/+5
Clean up the PCIe2a pinctrl node indentation which should use tabs only. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240719132522.9176-5-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sc8280xp-x13s: disable PCIe perst pull downsJohan Hovold1-3/+3
Disable the PCIe perst pull-down resistors to save some power. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240719132522.9176-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sc8280xp-crd: clean up PCIe2a pinctrl nodeJohan Hovold1-5/+5
Clean up the PCIe2a pinctrl node indentation which should use tabs only. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240719132522.9176-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sc8280xp-crd: disable PCIe perst pull downsJohan Hovold1-3/+3
Disable the PCIe perst pull-down resistors to save some power. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240719132522.9176-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sm8550-hdk: add the Wifi nodeAmit Pundir1-12/+101
Describe the ath12k WLAN on-board the WCN7850 module present on the board. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240718125545.2238857-1-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: msm8916-samsung-grandmax: Add touchscreenLin, Meng-Bo1-1/+23
Grand Max uses an Imagis IST3038 touchscreen that is connected to blsp_i2c5. Add it to the device tree. Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240718112715.6117-1-linmengbo06890@proton.me Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: msm8939-samsung-a7: rename pwm node to conform to dtschemaRayyan Ansari1-1/+1
Rename the pwm node from "pwm-vibrator" to "pwm" to conform to the dt schema. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240716135339.87192-1-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sm8550-qrd: use the PMU to power up bluetoothNeil Armstrong1-17/+9
Change the HW model in sm8550-qrd.dts to a one closer to reality - where the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU inside the package. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-2-67b3755edf6a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sm8650-hdk: use the PMU to power up bluetoothNeil Armstrong1-17/+9
Change the HW model in sm8650-hdk.dts to a one closer to reality - where the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU inside the package. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-1-67b3755edf6a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sa8775p: Mark APPS and PCIe SMMUs as DMA coherentQingqing Zhou1-0/+2
The SMMUs on sa8775p are cache-coherent. GPU SMMU is marked as such, mark the APPS and PCIe ones as well. Fixes: 603f96d4c9d0 ("arm64: dts: qcom: add initial support for qcom sa8775p-ride") Fixes: 2dba7a613a6e ("arm64: dts: qcom: sa8775p: add the pcie smmu node") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com> Rule: add Link: https://lore.kernel.org/stable/20240723075948.9545-1-quic_qqzhou%40quicinc.com Link: https://lore.kernel.org/r/20240725072117.22425-1-quic_qqzhou@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: pmi8950: Remove address from lpg nodeRayyan Ansari1-2/+1
Remove the address in both the reg property and node name to adhere to the bindings. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-2-d7f6007b530d@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: pmi8994: Add label to wled nodeRayyan Ansari1-0/+3
Add a label, which is a required property, to the wled node. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-1-d7f6007b530d@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: sa8775p: Add interconnects for ethernetSagar Cheluvegowda1-0/+12
Define interconnect properties for ethernet hardware. Suggested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240709-icc_bw_voting_emac_dtsi-v2-1-a1e02c7099a5@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: x1e80100-crd: Add LID switchStephan Gerhold1-0/+23
Add gpio-keys for exposing the LID switch state, similar to sc8280xp-lenovo-thinkpad-x13s.dts. Only the GPIO number is different. Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240710-x1e80100-crd-lid-v1-1-0156e8a62af6@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: x1e80100: Disable SMB2360_2 by defaultKonrad Dybcio5-8/+18
It's absent on (most?) laptops that only have 2 type-C ports (of which there are quite a few, and coming upstream too). Keep it disabled by default and re-enable it on actual users. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240711-topic-hhh-v1-2-a1b6b716685f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-29arm64: dts: qcom: x1e80100: Fix up hex styleKonrad Dybcio1-39/+39
Adhere to the convention: pad the addresses to 8 hex digits and use lowercase letters. Compile tested, no difference. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240711-topic-hhh-v1-1-a1b6b716685f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-16Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds184-2561/+17117
Pull SoC dt updates from Arnd Bergmann: "The devicetree updates are fairly well spread out across platforms, with Qualcomm making up about a third of the total. There are three new SoCs in existing product families this: - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores instead of just two as well as a GPU and more high-speed I/O devices. - Qualcomm QCS8550 is a variant of SM8550 for IOT devices - Airoha EN7581 is a 10G-PON network chip and related to the MT7981 Wireless router chip from its parent Mediatek. In total there are 58 new machines, including four riscv boards and eight for 32-bit arm. The most exciting new addition is probably a pair of laptops based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook S15 and the Lenovo Yoga Slim7x. Other noteworthy new additions are: - A total of 20 Qualcomm based machines, mostly Android devices from Samsung, Motorola and LG, as well as a wireless router and some reference designs - Six NXP i.MX based machines, mostly industrial boards along with some reference designs - Mediatek sees some interesting Filogic based routers including the "OpenWRT One", a few new Chromebooks as well as single-board computers. - Four machines from Solidrun based on Marvell cn913x, replacing the older Armada 8000 based counterparts - The four Amlogic machines are all set top boxes or reference designs for them - The nine new Rockchips machines are mostly single-board computers including some interesting ones based on the rk3588 chip like the ROCK 5 ITX board and the CM3588 with its four NVMe slots - The RISC-V boards are all single-board computers based on Starfive JH7110, Microchip MPFS and Allwinner D1, which all had similar boards already There are also a lot of updates to already supported machines, notably for the TI K3, Rockchips, Freescale and of course Qualcomm platforms" * tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits) arm64: dts: allwinner: h616: add crypto engine node riscv: dts: add clock generator for Sophgo SG2042 SoC arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B mailmap: Update Luca Weiss's email address ARM: dts: ixp4xx: nslu2: beeper uses PWM arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices ARM: dts: qcom: msm8960: correct memory base arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator ...
2024-07-07arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTEAnton Bambura2-0/+141
Add initial device-tree for LG Leon LTE (lg-c50), currently supported features: - eMMC; - MicroSD; - usb in peripheral mode; - WiFi/BT; - vibration; - keys. Signed-off-by: Anton Bambura <jenneron@postmarketos.org> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-3-6fbcf714d69b@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-07arm64: dts: qcom: msm8916-lg-m216: Add initial device treeCristian Cozzolino2-0/+252
This commit adds initial support for the LG K10 smartphone. Support for the following features is included: - Serial - Keys - Battery and charger - Accelerometer, magnetometer - Touchscreen - Sound and modem - Haptic Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> [Nikita: Minor cleanup] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-2-6fbcf714d69b@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: ipq9574: Add icc provider ability to gccVaradarajan Narayanan1-0/+2
IPQ SoCs dont involve RPM in managing NoC related clocks and there is no NoC scaling. Linux itself handles these clocks. However, these should not be exposed as just clocks and align with other Qualcomm SoCs that handle these clocks from a interconnect provider. Hence include icc provider capability to the gcc node so that peripherals can use the interconnect facility to enable these clocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240430064214.2030013-7-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm8150: Add video clock controller nodeSatya Priya Kakitapalli2-0/+18
Add device node for video clock controller on Qualcomm SM8150 platform. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240509-videocc-sm8150-dt-node-v4-2-e9617f65e946@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: pm6150: Add vibratorJens Reidel1-0/+6
Add a node for the vibrator module found inside the PM6150. Signed-off-by: Jens Reidel <adrian@travitia.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240606181027.98537-3-adrian@travitia.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sc7280: Enable download mode register writeMukesh Ojha1-0/+1
Enable download mode setting for sc7280 which can help collect ramdump for this SoC. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240705143443.1491956-1-quic_mojha@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermalsLuca Weiss1-0/+189
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0, RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to PM6150L. Due to hardware constraints we can only register 4 zones with pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-2-a4870a8d084f@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermalsLuca Weiss1-0/+23
Configure the thermals for the XO_THERM thermistor connected to the PMK8003 (which is called PMK8350 in software). The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already been added in the past. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-1-a4870a8d084f@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain propertyLuca Weiss1-0/+2
By default the DSP domains are secure, add the missing qcom,non-secure-domain property to mark them as non-secure. Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes") Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240705-sm6350-fastrpc-fix-v2-1-89a43166c9bb@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+2
For Gen-1 targets like SDM845, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM845 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like MSM8996, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8996 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SM6350, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6350 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SM6115, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6115 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SDM630, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM630 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like MSM8998, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8998 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+2
For Gen-1 targets like IPQ8074, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ8074 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like IPQ6018, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ6018 to mitigate this issue. Cc: stable@vger.kernel.org Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-06arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetreeSrinivas Kandagatla2-0/+930
Add an initial devicetree for the Lenovo Yoga slim 7x with support for Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu, NVMe and remoteprocs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/20240703-yoga-slim7x-v2-2-3b297dab8db1@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 08:32:37 +0300