summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo1-4/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-04-06arm64: dts: qcom: msm8998: Disable MSS remoteproc by defaultJami Kettunen1-0/+4
This was already the case for ADSP and SLPI remoteprocs & doesn't affect existing boards where it has been re-enabled. Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com> Link: https://lore.kernel.org/r/20210406010708.2376807-3-jamipkettunen@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-03arm64: dts: qcom: msm8998: Disable some components by defaultKonrad Dybcio1-0/+10
Some components (like PCIe) are not used on all devices and with a certain firmware configuration they might end up triggering a force reboot or a Synchronous Abort. This commit brings no functional difference as the nodes are enabled on devices which didn't disable them previously. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109163001.146867-6-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-21arm64: dts: qcom: msm8998-mtp: Fix label on l15 regulatorJeffrey Hugo1-1/+1
The label on the l15 regulator node does not follow the style of the rest of the regulator nodes. Luckily, no one has used the label yet, so lets fix it. Fixes: 31c1f0e33deb ("arm64: dts: qcom: msm8998: Add RPM and regulators for MTP") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20200528144814.44143-1-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-09arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5Bjorn Andersson1-2/+6
Disable Coresight funnel 4 and 5, for now, as these causes the MTP to crash when clock late_initcall disables unused clocks. Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200308055445.1992189-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-08arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3Bjorn Andersson1-0/+1
The msm_serial driver has a predefined set of uart ports defined, which is allocated either by reading aliases or if no match is found a simple counter, starting at index 0. But there's no logic in place to prevent these two allocation mechanism from colliding. As a result either none or all of the active msm_serial instances must be listed as aliases. Define blsp1_uart3 as "serial1" to mitigate this problem. Fixes: 4cffb9f2c700 ("arm64: dts: qcom: msm8998-mtp: Enable bluetooth") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191119011823.379100-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodesSibi Sankar1-0/+8
This patch adds ADSP, MPSS and SLPI nodes for MSM8998 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191218132217.28141-6-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-18arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetoothJeffrey Hugo1-0/+23
It turns out that the wcn3990 can float the gpio lines during bootup, etc which will result in the uart core thinking there is incoming data. This results in the bluetooth stack getting garbage. By applying a bias to match what wcn3990 would drive, the issue is corrected. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191021161921.31825-1-jeffrey.l.hugo@gmail.com [bjorn: Moved board specific pinctrl states to the end] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: msm8998: Add wifi nodeJeffrey Hugo1-0/+9
Add the wifi node and required reserved memory to enable the wlan hardware. Enable the wifi node in both the mtp and clamshell platforms after adding the relevant regulators for each platform. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191107043313.4055-3-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-01arm64: dts: qcom: msm8998: Disable coresight by defaultSai Prakash Ranjan1-0/+68
Boot failure has been reported on MSM8998 based laptop when coresight is enabled. This is most likely due to lack of firmware support for coresight on production device when compared to debug device like MTP where this issue is not observed. So disable coresight by default for MSM8998 and enable it only for MSM8998 MTP. Reported-and-tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Fixes: 783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-18arm64: dts: qcom: msm8998-mtp: Enable bluetoothJeffrey Hugo1-0/+14
Bluetooth is provided by a wcn3990, which is connected to the main SoC via blsp1_uart3. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-18arm64: dts: msm8998-mtp: Add pm8005_s1 regulatorJeffrey Hugo1-0/+17
The pm8005_s1 is VDD_GFX, and needs to be on to enable the GPU. This should be hooked up to the GPU CPR, but we don't have support for that yet, so until then, just turn on the regulator and keep it on so that we can focus on basic GPU bringup. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-26arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zonesAmit Kucheria1-38/+0
The msm8998-mtp doesn't have TSENS-based sensors wired up for skin and battery thermal zones. TSENS sensors should be common across all boards using the SoC and shouldn't be board-specific as these entries. They also show the following error when trying to read the temperature cat: read error: Invalid argument Remove these board-specific erroneous thermal zones. Fixes: 4449b6f248d9 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones") Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Andy Gross <agross@kernel.org>
2019-03-28arm64: dts: qcom: msm8998: Add UFS nodesMarc Gonzalez1-0/+19
Add host controller and PHY DT nodes. Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-28arm64: dts: qcom: msm8998: Allow UFSHC driver to set-loadMarc Gonzalez1-0/+3
The UFS host controller driver needs to set the load on 3 power rails (l20, l26, s4) but the operation fails silently unless we specify the regulator-allow-set-load property in the corresponding DT nodes. Tested-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-02arm64: dts: qcom: msm8998: Add USB-related nodesJeffrey Hugo1-0/+22
Add nodes for USB and related PHYs. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-25arm64: dts: qcom: msm8998-mtp: Increase load on l21 for sdcardJeffrey Hugo1-0/+2
l21 is used as sdcard vmmc, and needs the load increased to prevent voltage drop issues with some sdcards. This addresses -84 errors seen during sdcard init with SDR104 cards. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-30arm64: dts: qcom: msm8998-mtp: Add external SDJeffrey Hugo1-0/+12
The externally accessible SD card slot on the MTP is driven by SDCC2. Wire it up for use. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-10arm64: dts: qcom: msm8998: Reserve gpio ranges on MTPBjorn Andersson1-0/+4
GPIOs 0 through 3 and 81 through 84 are configured to not be accessible from the application CPUs. Mark them as reserved to allow the MSM8998 MTP to boot after the introduction of 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning"). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13arm64: dts: qcom: msm8998: Add pmi8998 fileBjorn Andersson1-0/+3
Add new dtsi file for the PMI8998, with its gpios and include all three PMICs in the MSM8998 MTP dts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13arm64: dts: qcom: msm8998: Add tsens and thermal-zonesBjorn Andersson1-0/+38
Add the two tsens instances and the thermal zones for CPUs, GPUs, battery and skin sensors. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13arm64: dts: qcom: msm8998: Add RPM and regulators for MTPBjorn Andersson1-0/+184
Add nodes for RPM communication for MSM8998 and the regulator nodes for the MTP. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13arm64: dts: Add msm8998 SoC and MTP board supportJoonwoo Park1-0/+18
Add initial device tree support for the Qualcomm MSM8998 SoC and MTP8998 evaluation board. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Imran Khan <kimran@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Restructured, removed its node and moved to SPDX headers] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-29 00:37:06 +0300