summaryrefslogtreecommitdiff
path: root/arch/arm/xen/enlighten.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-28xen/arm: allow console=hvc0 to be omitted for guestsArd Biesheuvel1-0/+4
From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This patch registers hvc0 as the preferred console if no console has been specified explicitly on the kernel command line. The purpose is to allow platform agnostic kernels and boot images (such as distro installers) to boot in a Xen/ARM domU without the need to modify the command line by hand. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@linaro.org>
2015-05-28arm,arm64/xen: move Xen initialization earlierStefano Stabellini1-24/+34
Currently, Xen is initialized/discovered in an initcall. This doesn't allow us to support earlyprintk or choosing the preferred console when running on Xen. The current function xen_guest_init is now split in 2 parts: - xen_early_init: Check if there is a Xen node in the device tree and setup domain type - xen_guest_init: Retrieve the information from the device node and initialize Xen (grant table, shared page...) The former is called in setup_arch, while the latter is an initcall. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Julien Grall <julien.grall@linaro.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Will Deacon <will.deacon@arm.com>
2015-05-28arm/xen: Correctly check if the event channel interrupt is presentJulien Grall1-4/+6
The function irq_of_parse_and_map returns 0 when the IRQ is not found. Futhermore, move the check before notifying the user that we are running on Xen. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2015-05-18xen/arm: Define xen_arch_suspend()Boris Ostrovsky1-0/+1
Commit 2b953a5e994c ("xen: Suspend ticks on all CPUs during suspend") introduced xen_arch_suspend() routine but did so only for x86, breaking ARM builds. We need to add it to ARM as well. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Michal Suchanek <hramrach@gmail.com> Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-16xen/privcmd: improve performance of MMAPBATCH_V2David Vrabel1-4/+16
Make the IOCTL_PRIVCMD_MMAPBATCH_V2 (and older V1 version) map multiple frames at a time rather than one at a time, despite the pages being non-consecutive GFNs. xen_remap_foreign_mfn_array() is added which maps an array of GFNs (instead of a consecutive range of GFNs). Since per-frame errors are returned in an array, privcmd must set the MMAPBATCH_V1 error bits as part of the "report errors" phase, after all the frames are mapped. Migrate times are significantly improved (when using a PV toolstack domain). For example, for an idle 12 GiB PV guest: Before After real 0m38.179s 0m26.868s user 0m15.096s 0m13.652s sys 0m28.988s 0m18.732s Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-03-16xen: unify foreign GFN map/unmap for auto-xlated physmap guestsDavid Vrabel1-87/+3
Auto-translated physmap guests (arm, arm64 and x86 PVHVM/PVH) map and unmap foreign GFNs using the same method (updating the physmap). Unify the two arm and x86 implementations into one commont one. Note that on arm and arm64, the correct error code will be returned (instead of always -EFAULT) and map/unmap failure warnings are no longer printed. These changes are required if the foreign domain is paging (-ENOENT failures are expected and must be propagated up to the caller). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-01-20arm64: Relax licensing of arm64 Xen DMA operationsChuck Tuffli1-2/+2
With Xen configured into the arm64 kernel, any driver allocating DMA'able memory for PCI operations, must be GPL compatible, regardless of its interaction with Xen. This patch relaxes the GPL requirement of xen_dma_ops and its dependencies to allow open source drivers to be compiled for the arm64 architecture. Signed-off-by: Chuck Tuffli <chuck.tuffli@emulex.com>
2014-12-04xen/arm: remove handling of XENFEAT_grant_map_identityStefano Stabellini1-5/+0
The feature has been removed from Xen. Also Linux cannot use it on ARM32 without CONFIG_ARM_LPAE. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-09-11xen/arm: introduce XENFEAT_grant_map_identityStefano Stabellini1-0/+6
The flag tells us that the hypervisor maps a grant page to guest physical address == machine address of the page in addition to the normal grant mapping address. It is needed to properly issue cache maintenance operation at the completion of a DMA operation involving a foreign grant. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Denis Schneider <v1ne2go@gmail.com>
2014-07-25xen/arm: use BUG_ONHimangi Saraogi1-4/+2
Use BUG_ON(x) rather than if(x) BUG(); The semantic patch that fixes this problem is as follows: // <smpl> @@ identifier x; @@ -if (x) BUG(); +BUG_ON(x); // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-05-12arm,arm64/xen: introduce HYPERVISOR_suspend()Stefano Stabellini1-0/+8
Introduce HYPERVISOR_suspend() and a few additional empty stubs for Xen arch specific functions called by drivers/xen/manage.c. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-05-09arm: xen: export HYPERVISOR_multicall to modules.Ian Campbell1-0/+1
"arm: xen: implement multicall hypercall support." forgot to do this. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-30xen/gnttab: Use phys_addr_t to describe the grant frame base addressJulien Grall1-3/+3
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT is enabled). We can't assume that the grant frame base address will always fits in an unsigned long. Use phys_addr_t instead of unsigned long as argument for gnttab_setup_auto_xlat_frames. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-30arm/xen: Initialize event channels earlierJulien Grall1-27/+44
Event channels driver needs to be initialized very early. Until now, Xen initialization was done after all CPUs was bring up. We can safely move the initialization to an early initcall. Also use a cpu notifier to: - Register the VCPU when the CPU is prepared - Enable event channel IRQ when the CPU is running Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/grant: Implement an grant frame array struct (v3).Konrad Rzeszutek Wilk1-2/+7
The 'xen_hvm_resume_frames' used to be an 'unsigned long' and contain the virtual address of the grants. That was OK for most architectures (PVHVM, ARM) were the grants are contiguous in memory. That however is not the case for PVH - in which case we will have to do a lookup for each virtual address for the PFN. Instead of doing that, lets make it a structure which will contain the array of PFNs, the virtual address and the count of said PFNs. Also provide a generic functions: gnttab_setup_auto_xlat_frames and gnttab_free_auto_xlat_frames to populate said structure with appropriate values for PVHVM and ARM. To round it off, change the name from 'xen_hvm_resume_frames' to a more descriptive one - 'xen_auto_xlat_grant_frames'. For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver" we will populate the 'xen_auto_xlat_grant_frames' by ourselves. v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames and also introduces xen_unmap for gnttab_free_auto_xlat_frames. Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v3: Based on top of 'asm/xen/page.h: remove redundant semicolon'] Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-12-11arm: xen: foreign mapping PTEs are special.Ian Campbell1-1/+1
These mappings are in fact special and require special handling in privcmd, which already exists. Failure to mark the PTE as special on arm64 causes all sorts of bad PTE fun. e.g. e.g.: BUG: Bad page map in process xl pte:e0004077b33f53 pmd:4079575003 page:ffffffbce1a2f328 count:1 mapcount:-1 mapping: (null) index:0x0 page flags: 0x4000000000000014(referenced|dirty) addr:0000007fb5259000 vm_flags:040644fa anon_vma: (null) mapping:ffffffc03a6fda58 index:0 vma->vm_ops->fault: privcmd_fault+0x0/0x38 vma->vm_file->f_op->mmap: privcmd_mmap+0x0/0x2c CPU: 0 PID: 2657 Comm: xl Not tainted 3.12.0+ #102 Call trace: [<ffffffc0000880f8>] dump_backtrace+0x0/0x12c [<ffffffc000088238>] show_stack+0x14/0x1c [<ffffffc0004b67e0>] dump_stack+0x70/0x90 [<ffffffc000125690>] print_bad_pte+0x12c/0x1bc [<ffffffc0001268f4>] unmap_single_vma+0x4cc/0x700 [<ffffffc0001273b4>] unmap_vmas+0x68/0xb4 [<ffffffc00012c050>] unmap_region+0xcc/0x1d4 [<ffffffc00012df20>] do_munmap+0x218/0x314 [<ffffffc00012e060>] vm_munmap+0x44/0x64 [<ffffffc00012ed78>] SyS_munmap+0x24/0x34 Where unmap_single_vma contains inlined -> unmap_page_range -> zap_pud_range -> zap_pmd_range -> zap_pte_range -> print_bad_pte. Or: BUG: Bad page state in process xl pfn:4077b4d page:ffffffbce1a2f8d8 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x4000000000000014(referenced|dirty) Modules linked in: CPU: 0 PID: 2657 Comm: xl Tainted: G B 3.12.0+ #102 Call trace: [<ffffffc0000880f8>] dump_backtrace+0x0/0x12c [<ffffffc000088238>] show_stack+0x14/0x1c [<ffffffc0004b67e0>] dump_stack+0x70/0x90 [<ffffffc00010f798>] bad_page+0xc4/0x110 [<ffffffc00010f8b4>] free_pages_prepare+0xd0/0xd8 [<ffffffc000110e94>] free_hot_cold_page+0x28/0x178 [<ffffffc000111460>] free_hot_cold_page_list+0x38/0x60 [<ffffffc000114cf0>] release_pages+0x190/0x1dc [<ffffffc00012c0e0>] unmap_region+0x15c/0x1d4 [<ffffffc00012df20>] do_munmap+0x218/0x314 [<ffffffc00012e060>] vm_munmap+0x44/0x64 [<ffffffc00012ed78>] SyS_munmap+0x24/0x34 x86 already gets this correct. 32-bit arm gets away with this because there is not PTE_SPECIAL bit in the PTE there and the vm_normal_page fallback path does the right thing. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-12-04XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfnEric Trudeau1-2/+2
From: Eric Trudeau <etrudeau@broadcom.com> xen_hvm_resume_frames stores the physical address of the grant table. englighten.c was incorrectly setting it as if it was a page frame number. This caused the table to be mapped into the guest at an unexpected physical address. Additionally, a warning is improved to include the grant table address which failed in xen_remap. Signed-off-by: Eric Trudeau <etrudeau@broadcom.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-09-09Merge tag 'v3.11-rc7' into stable/for-linus-3.12Konrad Rzeszutek Wilk1-0/+1
Linux 3.11-rc7 As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e Author: Chuck Anderson <chuck.anderson@oracle.com> Date: Tue Aug 6 15:12:19 2013 -0700 xen/smp: initialize IPI vectors before marking CPU online * tag 'v3.11-rc7': (443 commits) Linux 3.11-rc7 ARC: [lib] strchr breakage in Big-endian configuration VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c staging: comedi: bug-fix NULL pointer dereference on failed attach lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "ACPI / video: Always call acpi_video_init_brightness() on init" Revert "genetlink: fix family dump race" ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09xen/arm: disable cpuidle and cpufreq when linux is running as dom0Julien Grall1-0/+9
When linux is running as dom0, Xen doesn't show the physical cpu but a virtual CPU. On some ARM SOC (for instance the exynos 5250), linux registers callbacks for cpuidle and cpufreq. When these callbacks are called, they will modify directly the physical cpu not the virtual one. It can impact the whole board instead of only dom0. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09ARM: xen: only set pm function ptrs for Xen guestsRob Herring1-1/+4
xen_pm_init was unconditionally setting pm_power_off and arm_pm_restart function pointers. This breaks multi-platform kernels. Make this conditional on running as a Xen guest and make it a late_initcall to ensure it is setup after platform code for Dom0. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: stable@vger.kernel.org
2013-08-22Merge tag 'stable/for-linus-3.11-rc6-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - On ARM did not have balanced calls to get/put_cpu. - Fix to make tboot + Xen + Linux correctly. - Fix events VCPU binding issues. - Fix a vCPU online race where IPIs are sent to not-yet-online vCPU. * tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/smp: initialize IPI vectors before marking CPU online xen/events: mask events when changing their VCPU binding xen/events: initialize local per-cpu mask for all possible events x86/xen: do not identity map UNUSABLE regions in the machine E820 xen/arm: missing put_cpu in xen_percpu_init
2013-08-05xen/arm: missing put_cpu in xen_percpu_initJulien Grall1-0/+1
When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn: [ 4.127825] ------------[ cut here ]------------ [ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158() [ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance This is because xen_percpu_init uses get_cpu but doesn't have the corresponding put_cpu. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-23xen/arm,arm64: update xen_restart after ff701306cd49 and 7b6d864b48d9Stefano Stabellini1-1/+1
Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) and ff701306cd49 (arm64: use common reboot infrastructure) change the prototype of arm_pm_restart on arm and arm64. Update xen_restart accordingly. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-04xen/arm and xen/arm64: implement HYPERVISOR_tmem_opStefano Stabellini1-0/+1
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-05-13xen/arm: rename xen_secondary_init and run it on every online cpuStefano Stabellini1-11/+4
Rename xen_secondary_init to xen_percpu_init. Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call. Merge xen_percpu_enable_events into xen_percpu_init. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-05-13xen/arm: do not handle VCPUOP_register_vcpu_info failuresStefano Stabellini1-7/+3
We expect VCPUOP_register_vcpu_info to succeed, do not try to handle failures. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2013-05-13xen/arm: initialize pm functions laterStefano Stabellini1-1/+7
If we are running in dom0, we have to wait for the arch specific code to complete the initialization in order for us to successfully reset the power_off and pm_restart functions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-04-27xen/arm: remove duplicated include from enlighten.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2013-04-25xen/arm: use sched_op hypercalls for machine reboot and power offStefano Stabellini1-0/+24
Changes in v5: - set pm_power_off and arm_pm_restart from the Xen specific intialization code. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-04-25xen/arm: SMP supportStefano Stabellini1-6/+42
Map vcpu_info using VCPUOP_register_vcpu_info on all the online vcpus, make sure the allocated struct doesn't cross a page boundary. Call enable_percpu_irq on every cpu. Changes in v5: - allocate xen_vcpu_info dynamically, aligning it to the size of the struct; - use VCPUOP_register_vcpu_info on cpu0 too. Changed in v2: - move the percpu variable argument fix to a separate patch; - remove unused variable. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-04-25xen/arm: implement HYPERVISOR_vcpu_opStefano Stabellini1-0/+1
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
2013-04-25xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irqStefano Stabellini1-1/+1
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Ian Campbell <ian.camjpbell@citrix.com> CC: stable@vger.kernel.org
2013-02-20xen: implement updated XENMEM_add_to_physmap_range ABIIan Campbell1-3/+5
Allows for more fine grained error reporting. Only used by PVH and ARM both of which are marked EXPERIMENTAL precisely because the ABI is not yet stable Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [v1: Rebased without PVH patches] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-12-14Merge tag 'stable/for-linus-3.8-rc0-tag' of ↵Linus Torvalds1-21/+102
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: - Add necessary infrastructure to make balloon driver work under ARM. - Add /dev/xen/privcmd interfaces to work with ARM and PVH. - Improve Xen PCIBack wild-card parsing. - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/ online sockets depending on the power consumption. - PVHVM + kexec = use an E820_RESV region for the shared region so we don't overwrite said region during kexec reboot. - Cleanups, compile fixes. Fix up some trivial conflicts due to the balloon driver now working on ARM, and there were changes next to the previous work-arounds that are now gone. * tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/PVonHVM: fix compile warning in init_hvm_pv_info xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range xen/acpi: Move the xen_running_on_version_or_later function. xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h xen/acpi: Fix compile error by missing decleration for xen_domain. xen/acpi: revert pad config check in xen_check_mwait xen/acpi: ACPI PAD driver xen-pciback: reject out of range inputs xen-pciback: simplify and tighten parsing of device IDs xen PVonHVM: use E820_Reserved area for shared_info
2012-11-29xen: arm: implement remap interfaces needed for privcmd mappings.Ian Campbell1-3/+97
We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29xen: arm: enable balloon driverIan Campbell1-18/+5
The code is now in a state where can just enable it. Drop the *_xenballloned_pages duplicates since these are now supplied by the balloon code. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-09xen/arm: Fix compile errors when drivers are compiled as modules (export more).Stefano Stabellini1-0/+6
The commit 911dec0db4de6ccc544178a8ddaf9cec0a11d533 "xen/arm: Fix compile errors when drivers are compiled as modules." exports the neccessary functions. But to guard ourselves against out-of-tree modules and future drivers hitting this, lets export all of the relevant hypercalls. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07xen/arm: Fix compile errors when drivers are compiled as modules.Konrad Rzeszutek Wilk1-0/+5
We end up with: ERROR: "HYPERVISOR_event_channel_op" [drivers/xen/xen-gntdev.ko] undefined! ERROR: "privcmd_call" [drivers/xen/xen-privcmd.ko] undefined! ERROR: "HYPERVISOR_grant_table_op" [drivers/net/xen-netback/xen-netback.ko] undefined! and this patch exports said function (which is implemented in hypercall.S). Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfreeStefano Stabellini1-0/+18
Only until we get the balloon driver to work. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: receive Xen events on ARMStefano Stabellini1-0/+33
Compile events.c on ARM. Parse, map and enable the IRQ to get event notifications from the device tree (node "/xen"). Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-13xen/arm: initialize grant_table on ARMStefano Stabellini1-0/+14
Initialize the grant table mapping at the address specified at index 0 in the DT under the /xen node. After the grant table is initialized, call xenbus_probe (if not dom0). Changes in v2: - introduce GRANT_TABLE_PHYSADDR; - remove unneeded initialization of boot_max_nr_grant_frames. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-08-08xen/arm: get privilege statusStefano Stabellini1-0/+7
Use Xen features to figure out if we are privileged. XENFEAT_dom0 was introduced by 23735 in xen-unstable.hg. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: Xen detection and shared_info page mappingStefano Stabellini1-0/+61
Check for a node in the device tree compatible with "xen,xen", if it is present set xen_domain_type to XEN_HVM_DOMAIN and continue initialization. Map the real shared info page using XENMEM_add_to_physmap with XENMAPSPACE_shared_info. Changes in v4: - simpler parsing of Xen version in the compatible DT node. Changes in v3: - use the "xen,xen" notation rather than "arm,xen"; - add an additional check on the presence of the Xen version. Changes in v2: - replace pr_info with pr_debug. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-09-14arm: initial Xen supportStefano Stabellini1-0/+35
- Basic hypervisor.h and interface.h definitions. - Skeleton enlighten.c, set xen_start_info to an empty struct. - Make xen_initial_domain dependent on the SIF_PRIVILIGED_BIT. The new code only compiles when CONFIG_XEN is set, that is going to be added to arch/arm/Kconfig in patch #11 "xen/arm: introduce CONFIG_XEN on ARM". Changes in v3: - improve comments. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 08:24:22 +0300