summaryrefslogtreecommitdiff
path: root/arch/arm/plat-orion
AgeCommit message (Collapse)AuthorFilesLines
2012-03-16ARM: orion: wdt: use resource vice direct accessJason Cooper1-1/+6
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.Andrew Lunn1-1/+0
It is not used anywhere in the sound driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-02-10ARM: orion: Fix USB phy for orion5x.Andrew Lunn2-6/+6
The patch "ARM: orion: Consolidate USB platform setup code.", commit 4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and other orion5x boards, because the wrong type of PHY was being passed to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION and all the others want EHCI_PHY_NA. Allow the mach- code to tell the generic plat-orion code which USB PHY enum to place into the platform data. Version 2: Rebase to v3.3-rc2. Reported-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-10ARM: orion: Fix Orion5x GPIO regression from MPP cleanupAndrew Lunn1-2/+1
Patchset "ARM: orion: Refactor the MPP code common in the orion platform" broke at least Orion5x based platforms. These platforms have pins configured as GPIO when the selector is not 0x0. However the common code assumes the selector is always 0x0 for a GPIO lines. It then ignores the GPIO bits in the MPP definitions, resulting in that Orion5x machines cannot correctly configure there GPIO lines. The Fix removes the assumption that the selector is always 0x0. In order that none GPIO configurations are correctly blocked, Kirkwood and mv78xx0 MPP definitions are corrected to only set the GPIO bits for GPIO configurations. This third version, which does not contain any whitespace changes, and is rebased on v3.3-rc2. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-10Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds11-64/+245
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-05Merge branch 'devel-stable' into for-linusRussell King1-18/+3
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2011-12-20ARM: plat-orion: make gpiochip label uniqueHolger Brunck1-1/+5
The former implementation adds a fix gpiochip label string to the framework. This is confusing because orion_gpio_init is called more than once and this ends up in different gpiochips with the same label. This patch adds the already present orion_gpio_chip_count to the label string to make it unique in the system. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtimeMarc Zyngier1-18/+3
sched_clock() is yet another blocker on the road to the single image. This patch implements an idea by Russell King: http://www.spinics.net/lists/linux-omap/msg49561.html Instead of asking the platform to implement both sched_clock() itself and the rollover callback, simply register a read() function, and let the ARM code care about sched_clock() itself, the conversion to ns and the rollover. sched_clock() uses this read() function as an indirection to the platform code. If the platform doesn't provide a read(), the code falls back to the jiffy counter (just like the default sched_clock). This allow some simplifications and possibly some footprint gain when multiple platforms are compiled in. Among the drawbacks, the removal of the *_fixed_sched_clock optimization which could negatively impact some platforms (sa1100, tegra, versatile and omap). Tested on 11MPCore, OMAP4 and Tegra. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-14ARM: Orion: Remove address map info from all platform data structuresAndrew Lunn6-58/+13
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-14ARM: Orion: Get address map from plat-orion instead of via platform_dataAndrew Lunn3-5/+11
Use an getter function in plat-orion/addr-map.c to get the address map structure, rather than pass it to drivers in the platform_data structures. When the drivers are built for none orion platforms, a dummy function is provided instead which returns NULL. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-14ARM: Orion: mbus_dram_info consolidationAndrew Lunn2-5/+7
Move the *_mbus_dram_info structure into the orion platform and call it orion_mbus_dram_info everywhere. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-14ARM: Orion: Consolidate the address map setupAndrew Lunn3-1/+219
Compile tested on Dove, orion5x, mv78xx0. Boot tested on Kirkwood. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-08-24ARM: 7063/1: Orion: gpio: add missing include of linux/types.hAxel Lin1-0/+1
This patch adds missing include of linux/types.h to fix below build error. CC arch/arm/mach-mv78xx0/mpp.o In file included from arch/arm/mach-mv78xx0/include/mach/gpio.h:9, from /home/axel/repos/git/linux-2.6/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from arch/arm/mach-mv78xx0/mpp.c:10: arch/arm/plat-orion/include/plat/gpio.h:28: error: expected declaration specifiers or '...' before 'u32' make[1]: *** [arch/arm/mach-mv78xx0/mpp.o] Error 1 make: *** [arch/arm/mach-mv78xx0] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: gpio: make trivial GPIOLIB implementation the defaultRussell King1-2/+0
Rather than marking the mach/gpio.h header files which want to use the trivial GPIOLIB implementation, mark those which do not want to use it instead. This means that by default, you get the trivial implementation and only have to do something extra if you need to. This should encourage the use of the trivial default implementation. As an additional bonus, several gpio.h header files become empty. Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: gpio: consolidate gpio_to_irqRussell King1-5/+0
Many of the gpio_to_irq implementations use the gpiolib version of this function. Provide the standard gpiolib gpio_to_irq() for everyone, but allow platforms to override it if they wish. Add the neccessary overrides for those platforms which do not use the standard definition. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: gpio: consolidate trivial gpiolib implementationsRussell King1-4/+2
Consolidate 24 trivial gpiolib implementions out of mach/gpio.h into asm/gpio.h. This is basically the include of asm-generic/gpio.h and the definition of gpio_get_value, gpio_set_value, and gpio_cansleep as described in Documentation/gpio.txt Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-07genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot1-1/+1
This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-05-23Merge branch 'devel-stable' into for-linusRussell King8-118/+1232
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23clocksource: convert ARM 32-bit down counting clocksourcesRussell King1-19/+2
Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources to generic mmio clocksource infrastructure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-16ARM: dove: Consolidate mpp code with platform mpp.Andrew Lunn1-4/+1
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Refactor the MPP code common in the orion platformAndrew Lunn3-1/+116
mv78xx0 and kirkwood use identical mpp code. It should also be possible to rewrite the orion5x mpp to use this platform code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate setup of the crypto engine.Andrew Lunn2-0/+36
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate SATA platform setup.Andrew Lunn2-0/+40
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate USB platform setup code.Andrew Lunn2-0/+101
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate the XOR platform setup code.Andrew Lunn2-0/+226
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate the platform data setup for the watchdog.Andrew Lunn2-0/+23
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate SPI initialization.Andrew Lunn2-0/+53
This change removes the interrupt resource. The driver does not use it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate I2C initialization.Andrew Lunn2-0/+60
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate ethernet platform dataAndrew Lunn2-0/+310
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate the creation of the RTC platform data.Andrew Lunn2-0/+21
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16ARM: orion: Consolidate the creation of the uart platform data.Andrew Lunn3-1/+205
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-16arm: orion: Use generic irq chipThomas Gleixner3-117/+45
The core interrupt chip is a straight forward conversion. The gpio chip is implemented with two instances of the irq_chip_type which can be switched with the irq_set_type function. That allows us to use the generic callbacks and avoids the conditionals in them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner2-4/+4
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Reorder irq_set_ function callsThomas Gleixner1-1/+1
Reorder irq_set_chip() irq_set_chip_data() irq_set_handler() to irq_set_chip() irq_set_handler() irq_set_chip_data() so the next patch can combine irq_set_chip() and irq_set_handler() to irq_set_chip_and_handler(). Automated conversion with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner2-6/+6
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup irq_desc accessThomas Gleixner2-16/+11
Use the proper wrappers and use the flow type in irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-04ARM: Remove dependency of plat-orion GPIO code on mach directory includes.Lennert Buytenhek2-147/+314
This patch makes the various mach dirs that use the plat-orion GPIO code pass in GPIO-related platform info (GPIO controller base address, secondary base IRQ number, etc) explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-04ARM: Remove dependency of plat-orion time code on mach directory includes.Lennert Buytenhek2-46/+78
This patch makes the various mach dirs that use the plat-orion time code pass in timer and bridge addresses explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-01-13ARM: plat-orion: irq_data conversion.Lennert Buytenhek2-28/+27
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-23ARM: orion: convert sched_clock() to use new infrastructureRussell King1-35/+9
Convert orion platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-23ARM: ensure all sched_clock() implementations are notrace markedRussell King1-1/+1
ftrace requires sched_clock() to be notrace. Ensure that all implementations are so marked. Also make sure that they include linux/sched.h Also ensure OMAP clocksource read functions are marked notrace as they're used for sched_clock() too. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-23ARM: orion: update clock source registrationRussell King1-3/+1
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-21[ARM] Kirkwood: restrict the scope of the PCIe reset workaroundNicolas Pitre2-5/+3
Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the reset of the PCIe unit unconditional. While this may fix problems on some targets, this also causes problems on other targets. Saeed Bishara <saeed@marvell.com> said about the original problem: "We couln't pinpoint the root cause of this issue, actually we failed to reproduce that issue." So let's restrict the reset of the PCIe unit only to the target where the original problem was observed. Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-08-08Merge branch 'for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
2010-07-17[ARM] orion/kirkwood: reset PCIe unit on bootOlaf Rempel1-0/+34
Patch found in QNAPs vendor source package, with some cleanups (proper defines, shortened max. timeout from 1s to 200ms). Without this patch the PCIe SATA controller (Marvell 88sx7042/sata_mv) in my QNAP TS-419P (Marvell 88f6281/Kirkwood) stops working after a few minutes. The symptomes are described in this thread: http://marc.info/?l=linux-ide&m=124822863706181&w=2 [ Note: this is a workaround in need of a better analysis/solution -- NP ] Acked-by: Saeed Bishara <saeed@marvell.com> Tested-by: Bernhard R. Link <brl@pcpool00.mathematik.uni-freiburg.de> Seconded-by: Martin Michlmayr <tbm@cyrius.com> I'm_not_very_happy_with_it-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-31orion/kirkwood: add audio functions.apatard@mandriva.com1-0/+11
This patch add audio related definitions and functions Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-14mtd: orion/kirkwood: add RnB line support to orion mtd driverBen Dooks1-0/+1
Add support for a board to register a callback to get the state of the RnB line if it has it attached. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-29[ARM] Orion: fix PCIe inbound window programming when RAM size is not a ↵Lennert Buytenhek1-0/+6
power of two The PCIe inbound window size is supposed to be a power of two. If the total amount of RAM installed in the system is not a power of two, round it up such that it is. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24[ARM] Kirkwood: __init requires linux/init.hMartin Michlmayr1-0/+2
Include linux/init.h for __init to fix this error: CC [M] drivers/net/wireless/wl12xx/boot.o In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13, from arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/net/wireless/wl12xx/boot.c:24: arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’ make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1 make[5]: *** [drivers/net/wireless/wl12xx] Error 2 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08[ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre1-4/+4
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 12:07:33 +0300