summaryrefslogtreecommitdiff
path: root/arch/arm/mach-vexpress/v2m.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-13ARM: vexpress: Add fixed regulator for SMSCPawel Moll1-0/+10
SMSC driver requires "vdd33a" and "vddvario" regulator supplies now. Add fixed regulator describing 3V3 power line (in both motherboard's Device Trees and the non-DT code) and force fixed regulator config option if regulators framework is enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Initial common clock supportPawel Moll1-143/+109
This patch makes Versatile Express use the common clock framework instead of the plat-versatile implementation. It defines clock provider for VE's OSCs (clock generators) and registers all required fixed and variable clock sources (for both motherboard and core tile). This is a simple conversion of the existing state and will be extended (and migrated to drivers/clk) in the near future. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-12ARM: vexpress: Check master site in daughterboard's sysctl operationsPawel Moll1-5/+13
With recent enough motherboard firmware, core tile can be fitted in either of the two daughterboard sites. The non-DT tile code for V2P-CA9 did not check that when configuring DVI output nor setting CLCD pixel clock. Fixed now, providing "get master site" API in motherboard's code. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-05-31Merge branch 'late/soc' into devel-lateOlof Johansson1-2/+0
* late/soc: ARM: vexpress: Remove twice included header files ARM: vexpress: Device Tree updates ARM: EXYNOS: Support suspend and resume for EXYNOS5250 ARM: EXYNOS: Add Clock register list for save and restore ARM: EXYNOS: Add PMU table for EXYNOS5250 ARM: EXYNOS: Rename of function for pm.c ARM: EXYNOS: Remove GIC save & restore function ARM: dts: Add node for interrupt combiner controller on EXYNOS5250 ARM: S3C24XX: add support for second irq set of S3C2416
2012-05-21ARM: vexpress: Remove twice included header filesThomas Weber1-2/+0
Remove duplicates of - linux/device.h and - asm/hardware/gic.h Signed-off-by: Thomas Weber <thomas@tomweber.eu> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-04-27ARM: vexpress: plug local timers into the DT codeMarc Zyngier1-1/+7
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24Merge branch 'vexpress-dt-v3.3-rc4' of ↵Arnd Bergmann1-24/+257
git://git.linaro.org/people/pawelmoll/linux into next/dt * 'vexpress-dt-v3.3-rc4' of git://git.linaro.org/people/pawelmoll/linux: (573 commits) ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant) ARM: vexpress: Add Device Tree for V2P-CA9 core tile ARM: vexpress: Add Device Tree for V2P-CA5s core tile ARM: vexpress: Motherboard RS1 memory map support ARM: vexpress: Add Device Tree support ARM: vexpress: Use FDT data in platform SMP calls ARM: versatile: Map local timers using Device Tree when possible ARM: vexpress: Get rid of MMIO_P2V This adds full device tree boot support for the versatile express platform, as has been awaited for a long time. Conflicts: arch/arm/mach-vexpress/core.h The definition of AMBA_DEVICE was removed in one branch, and the definition of MMIO_P2V was removed in the other branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-24ARM: vexpress: Motherboard RS1 memory map supportPawel Moll1-1/+61
This patch adds support for RS1 memory map based Versatile Express motherboard. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree supportPawel Moll1-2/+151
This patch adds generic Versatile Express DT machine description, Device Tree description for the motherboard and documentation for the bindings. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-23ARM: vexpress: Get rid of MMIO_P2VPawel Moll1-22/+46
This patch gets rid of the MMIO_P2V and __MMIO_P2V macros, defining constant virtual base for motherboard and tile peripherals instead. Additionally, in preparation for the new motherboard memory map, the motherboard peripherals are using base pointers calculated in runtime, instead of compile-time calculated values. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-01-25ARM: amba: vexpress: get rid of private platform amba_device initializerRussell King1-10/+10
Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-08Merge branch 'driver-core-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-05Merge branch 'restart' into for-linusRussell King1-1/+1
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: Versatile Express: use new restart hookRussell King1-1/+1
Hook the Versatile Express platform restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-22driver-core: remove sysdev.h usage.Kay Sievers1-1/+1
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-11-15ARM: VExpress: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier1-0/+2
Convert the VExpress platform to be using the gic_handle_irq function as its primary interrupt handler. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-09-17Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King1-0/+7
Conflicts: arch/arm/mach-imx/mach-cpuimx27.c
2011-08-24ARM: 7003/1: vexpress: Add clock definition for the SP805.Nick Bowler1-0/+7
It seems that an entry for the SP805 watchdog in the table of clocks was missing. This results in the sp805_wdt driver rejecting the device with the following errors: sp805-wdt mb:wdt: Clock not found sp805-wdt mb:wdt: Probe Failed!!! sp805-wdt: probe of mb:wdt failed with error -2 While not obviously stated in the hardware docs, the onboard SP810's "REFCLK" is connected to a 32.768KHz crystal, and this drives the watchdog. Add a struct clk and corresponding lookup entry for it. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22ARM: vexpress: convert boot_params to atag_offsetNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-06-06ARM: 6946/1: vexpress: move v2m clock init to init_earlyRob Herring1-8/+7
Commit 7ff550de99141cbd3be0129d563cc4554fdde9f6 breaks vexpress booting. The v2m clock table needs to be setup in init_early before the timer initialization occurs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King1-18/+4
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23clockevents: ARM sp804: obtain sp804 timer rate via clksRussell King1-0/+4
This allows platforms to specify the rate of the SP804 clockevent via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clockevents: ARM sp804: allow clockevent name to be specifiedRussell King1-1/+2
This allows platforms to specify the clcokevent name upon registration. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: obtain sp804 timer rate via clksRussell King1-0/+8
This allows platforms to specify the rate of the SP804 clocksource via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: allow clocksource name to be specifiedRussell King1-1/+1
This allows platforms to specify the clocksource name upon registration, which is necessary should they wish to register more than one sp804 clocksource. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier1-1/+1
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6909/1: VExpress: Use physmap driver instead of integrator-flashMarc Zyngier1-18/+4
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-20ARM: 6771/1: vexpress: add support for multiple core tilesWill Deacon1-11/+54
The current Versatile Express BSP defines the MACHINE_START macro in the core tile code. This patch moves this into the generic board code and introduces a method for determining the current tile at runtime, allowing the Kernel to have support for multiple tiles compiled in. Tile-specific functions are executed via a descriptor struct containing the correct implementations for the current tile. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: vexpress: use new init_early for clock tree and sched_clock initRussell King1-2/+4
Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25ARM: 6633/1: vexpress: register platform PATA device.Nick Bowler1-0/+25
The compactflash device on this platform is not usable simply because it is never registered with the kernel. Fix that up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25ARM: 6635/2: Configure reference clock for Versatile Express timersPawel Moll1-0/+9
Timers on Versatile Express mainboard are used as system clock/event sources. Driver assumes that they are clocked with 1MHz signal. Old V2M firmware apparently configured it by default, but on newer boards one can observe that "sleep 1" command takes over 30 seconds to finish, as the timers are fed with 32kHz instead... This patch performs required magic and also removes code clearing timer's control registers, as exactly the same operations are performed by the timer driver few jiffies later. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-07Merge branch 'misc' into develRussell King1-2/+1
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-05Merge branch 'clksrc' into develRussell King1-1/+4
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2011-01-05ARM: vexpress: add sched_clock() for Versatile ExpressRussell King1-0/+4
Add a sched_clock() implementation to Versatile Express using the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD1-2/+1
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-04ARM: 6432/1: move timer-sp.c from versatile to commonRob Herring1-1/+1
From: Rob Herring <rob.herring@smooth-stone.com> The timer-sp h/w used on versatile platforms can also be used for other platforms, so move it to a common location. Signed-off-by: Rob Herring <rob.herring@smooth-stone.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-05ARM: fix section mismatch warnings in Versatile ExpressRussell King1-1/+1
WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init() The function v2m_timer_init() references the function __init sp804_clocksource_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clocksource_init is wrong. WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init() The function v2m_timer_init() references the function __init sp804_clockevents_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clockevents_init is wrong. WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init() The function ct_ca9x4_init() references the function __init l2x0_init(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of l2x0_init is wrong. WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table() The function ct_ca9x4_init() references the function __init clkdev_add_table(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of clkdev_add_table is wrong. WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown) The function ct_ca9x4_init() references the (unknown reference) __initdata (unknown). This is often because ct_ca9x4_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-04Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+6
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-07-31ARM: Fix Versatile/Realview/VExpress MMC card detection senseRussell King1-1/+1
The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-22ARM: AMBA: Add pclk definition for platforms using primecellsRussell King1-1/+6
Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Add Versatile Express supportRussell King1-0/+361
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 23:31:59 +0300