summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)AuthorFilesLines
2013-10-08Merge tag 'renesas-smp-for-v3.13' into soc2-baseSimon Horman18-68/+331
Renesas ARM based SoC SMP updates for v3.13 * Add CPU notifier based SCU boot vector code - Use on emev2, r8a7779 and sh73a0 SoCs - Remove now unused shmobile_smp_scu_boot_secondary() * Add shared APMU SMP support code - Use to add SMP support for r8a7790 SoC * Introduce shmobile_boot_size * Expose shmobile_invalidate_start() * Introduce shmobile_smp_cpu_disable() - Use on sh73a0 SoC - Remove now unused shmobile_smp_init_cpus()
2013-10-07Merge tag 'renesas-boards-for-v3.13' of ↵Olof Johansson18-34/+1085
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards From Simon Horman: Renesas ARM based SoC board updates for v3.13 * Display Unit support for lager and marzen boards * Update regulators for MMC0, SDHI0 and SDHI1 on ape6evm board * Enable use of FPGA on bockw board * Add sounds support to bockw board * Add USB function support to bockw board * Add Koelsch board * Disable MMCIF command completion signal on ape6evm, armadillo800eva, kzm9g and lager boards. * tag 'renesas-boards-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: disable MMCIF Command Completion Signal, add CLK_CTRL2 ARM: shmobile: kzm9g: disable MMCIF Command Completion Signal ARM: shmobile: armadillo800eva: disable MMCIF Command Completion Signal ARM: shmobile: ape6evm: disable MMCIF Command Completion Signal ARM: shmobile: bockw: add USB Function support ARM: shmobile: Koelsch support ARM: shmobile: bockw: add R-Car sound support (PIO) ARM: shmobile: bockw: enable global use of FPGA ARM: shmobile: lager: Fix Display Unit platform data ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulators ARM: shmobile: lager: Add Display Unit support ARM: shmobile: marzen: Add Display Unit support ARM: shmobile: r8a7778: add usb phy power control function ARM: shmobile: r8a7778: add USBHS clock ARM: shmobile: r8a7791 CMT support ARM: shmobile: r8a7791 SCIF support ARM: shmobile: Initial r8a7791 SoC support ARM: shmobile: r8a7778: add SSI/SRU clock support ARM: shmobile: r8a7790: Add DU and LVDS clocks ARM: shmobile: r8a7779: Rename DU device in clock lookups list Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge tag 'renesas-smp-for-v3.13' of ↵Olof Johansson18-68/+331
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Renesas ARM based SoC SMP updates for v3.13 * Add CPU notifier based SCU boot vector code - Use on emev2, r8a7779 and sh73a0 SoCs - Remove now unused shmobile_smp_scu_boot_secondary() * Add shared APMU SMP support code - Use to add SMP support for r8a7790 SoC * Introduce shmobile_boot_size * Expose shmobile_invalidate_start() * Introduce shmobile_smp_cpu_disable() - Use on sh73a0 SoC - Remove now unused shmobile_smp_init_cpus() * tag 'renesas-smp-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Include CA7 cores in APMU table ARM: shmobile: Extend APMU code to allow single cluster only ARM: shmobile: Remove shmobile_smp_scu_boot_secondary() ARM: shmobile: Let r8a7779 rely on SCU CPU notifier ARM: shmobile: Let EMEV2 rely on SCU CPU notifier ARM: shmobile: Let sh73a0 rely on SCU CPU notifier ARM: shmobile: Add CPU notifier based SCU boot vector code ARM: shmobile: Add r8a7790 SMP support using APMU code ARM: shmobile: Shared APMU SMP support code without DT ARM: shmobile: Introduce shmobile_boot_size ARM: shmobile: Expose shmobile_invalidate_start() ARM: shmobile: Remove unused shmobile_smp_init_cpus() ARM: shmobile: Use shmobile_smp_cpu_disable() on sh73a0 ARM: shmobile: Introduce shmobile_smp_cpu_disable() ARM: shmobile: r8a7790: Constify platform data and resources ARM: shmobile: Rename to r8a7790_init_early() ARM: shmobile: Rename to r8a73a4_init_early() Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge tag 'renesas-soc-for-v3.13' of ↵Olof Johansson10-15/+484
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Renesas ARM based SoC updates for v3.13 * Add support for r8a7791 SoC * Rename DU device in clock lookups list of r8a7779 SoC * USB and SSI/SRU clock support for r8a7778 SoC * USB phy power control function support for r8a7778 SoC * tag 'renesas-soc-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7778: add usb phy power control function ARM: shmobile: r8a7778: add USBHS clock ARM: shmobile: r8a7791 CMT support ARM: shmobile: r8a7791 SCIF support ARM: shmobile: Initial r8a7791 SoC support ARM: shmobile: r8a7778: add SSI/SRU clock support ARM: shmobile: r8a7790: Add DU and LVDS clocks ARM: shmobile: r8a7779: Rename DU device in clock lookups list Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge tag 'renesas-cleanup-for-v3.13' of ↵Olof Johansson8-20/+21
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: Renesas ARM based SoC cleanups for v3.13 * Constify platform data and resources of r8a7790 SoC * Rename to r8a7790_init_delay() as r8a7790_init_early() - This is in preparation for doing more than just initialising the delay * Rename r8a73a4_init_delay() as r8a73a4_init_early() - This is in preparation for doing more than just initialising the delay * tag 'renesas-cleanup-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: Constify platform data and resources ARM: shmobile: Rename to r8a7790_init_early() ARM: shmobile: Rename to r8a73a4_init_early() Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge tag 'renesas-fixes5-for-v3.12' of ↵Olof Johansson3-4/+29
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: * Correct incorrect placement of __initdata tag in ape6evm board code * tag 'renesas-fixes5-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag (+ other patches already present in v3.12-rc4) Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-01ARM: shmobile: ape6evm: fix incorrect placement of __initdata tagBartlomiej Zolnierkiewicz1-1/+1
__initdata tag should be placed between the variable name and equal sign for the variable to be placed in the intended .init.data section. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Include CA7 cores in APMU tableMagnus Damm1-0/+4
Add information to the shared APMU code regarding the APMU instance used to control the CA7 cores. This can be used on r8a7790 and r8a73a4, but should most likely be converted to DT in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Extend APMU code to allow single cluster onlyMagnus Damm1-0/+13
Extend the APMU code with a check to only allow boot of CPU cores that sit in the same cluster as CPU0. This makes it possible for people to use the r8a790 CA7 boot mode with CA7-cores only. The default CA15 boot mode will enable CA15 cores only. This is an intentional software limitation to cope with lacking scheduler support. By removing this patch it is possible to run all 8 cores in parallel, but this is not recommended without out of tree scheduler modfications or custom user space code to control the CPU affinitiy. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Remove shmobile_smp_scu_boot_secondary()Magnus Damm2-10/+0
Remove shmobile_smp_scu_boot_secondary() since it is no longer used. CPU boot vector setup is instead handled by CPU notifiers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let r8a7779 rely on SCU CPU notifierMagnus Damm1-4/+0
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let EMEV2 rely on SCU CPU notifierMagnus Damm1-6/+0
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let sh73a0 rely on SCU CPU notifierMagnus Damm1-5/+0
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Add CPU notifier based SCU boot vector codeMagnus Damm1-0/+24
Add CPU notifiers for the shared mach-shmobile SCU code to allow removal of the shared SCU boot_secondary code. Regarding notifiers, at CPU_UP_PREPARE time the SMP boot vector is initialized so secondary CPU cores can boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Add r8a7790 SMP support using APMU codeMagnus Damm6-0/+72
Add r8a7790 SMP support using the shared APMU code. To enable SMP the r8a7790 specific DTS needs to be updated to include CPU cores, and this is happening in a separate patch. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Shared APMU SMP support code without DTMagnus Damm2-0/+184
Introduce shared APMU SMP code for mach-shmobile. Both SMP boot up and CPU Hotplug is supported. This version does not use DT but if needed this will be added as an incremental feature patch. The code is designed around CONFIG_NR_CPUS and should in theory support any number of APMUs, however due to the current DT-less static design only a single APMU is supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: disable MMCIF Command Completion Signal, add CLK_CTRL2Guennadi Liakhovetski1-0/+2
MMCIF on r8a7790 doesn't support Command Completion Signal, but it does implement a CE_CLK_CTRL2 register. Platform parameters have to be added to account for these features on lager. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: kzm9g: disable MMCIF Command Completion SignalGuennadi Liakhovetski1-0/+1
MMCIF on sh73a0 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on kzm9g. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: armadillo800eva: disable MMCIF Command Completion SignalGuennadi Liakhovetski1-0/+1
MMCIF on r8a7740 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on armadillo800eva. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: ape6evm: disable MMCIF Command Completion SignalGuennadi Liakhovetski1-0/+1
MMCIF on r8a73a4 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on ape6evm. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: add USB Function supportKuninori Morimoto1-3/+78
Bock-W USB1 (CN29) can be USB Host/Func by SW98/SW99 settings. USB Func will be enabled if CONFIG_USB_RENESAS_USBHS_UDC[_MODULE] was selected on this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Koelsch supportHisashi Nakamura4-0/+51
Koelsch base board support making use of 2 GiB of memory, the r8a7791 SoC with the SCIF0 serial port and CA15 with CMT timer. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready SMP/PFC] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: add R-Car sound support (PIO)Kuninori Morimoto2-1/+275
This patch enables R-Car sound, AK4643 (CN19) and AK4554 (CN20/CN21) codec chip on Bock-W. But, it supports PIO transfer only at this point. User can check sound settings (Dip-switch/PFC etc) via this patch, but will get under/over flow error when playback/capture. Because PIO transfer via SSI will be interrupted "sampling rate" times per 1 second. DMA transfer will be supported when HPB-DMAC was enabled on r8a7778. You will notice strange ALSA sound card HW numbering on Bock-W board. This came from AK4554 strange format on playback/capture. The format on playback/capture is same on "normal" codec chip, but AK4554 was different. Because of that, AK4554 playback/capture are registered as a different sound card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: squashed cleanup of SND_SOC_xxx in Kconfig by Kuninori Morimoto] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: enable global use of FPGAKuninori Morimoto1-7/+8
This patch enables global use of FPGA, since it will be used from many devices. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: Fix Display Unit platform dataLaurent Pinchart1-2/+2
The DU device erroneously receives the DU resources array as platform data instead of the DU platform data structure. Fix it. This problem was introduced by f631fa0 ("ARM: shmobile: lager: Add Display Unit support"). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulatorsGuennadi Liakhovetski1-8/+46
Currently a dummy fixed always-on regulator is used for all 3 SD/MMC interfaces on ape6evm. This patch updates the board to use correct supplies for MMC0, SDHI0 and SDHI1 VDD. SDHI0 VccQ supply regulator should be implemented in a separate patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: Add Display Unit supportLaurent Pinchart1-0/+66
Only the VGA output is currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: Constify platform data and resourcesLaurent Pinchart1-7/+7
Platform data and resources for Lager devices are kmemdup()ed when the corresponding devices are registered and can thus be declared as const. Do so. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: marzen: Add Display Unit supportLaurent Pinchart1-0/+72
Support the DU0 VGA and DU1 LVDS outputs. DU1 is connected to a Mitsubishi AA104XD12 panel (10.4" XGA). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7778: add usb phy power control functionKuninori Morimoto2-11/+28
USB phy initialisation function is needed from not only USB Host but also USB Function too. This patch adds usb phy common control function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7778: add USBHS clockKuninori Morimoto1-0/+1
This patch adds USBHS clock for renesas_usbhs driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 CMT supportMagnus Damm3-1/+36
Add r8a7791 CMT support via channel 0 of CMT0. At this point the CMT is used for clock event operation, but in the future the arch timer will be the main timer and the CMT will be used for deep sleep wake up only. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> (cherry picked from commit a7663b88280d00359715817620798e99d54d401c) Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 SCIF supportYoshikazu Fujikawa3-1/+118
Add SCIF serial port support to the r8a7791 SoC by adding platform devices for SCIFA0 -> SCIFA5 as well as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF5 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped holes in enum] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Initial r8a7791 SoC supportHisashi Nakamura5-0/+250
Add initial support for the r8a7791 SoC including: - Single Cortex-A15 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26ARM: shmobile: r8a7778: r8a7778_register_hspi() become staticKuninori Morimoto1-1/+1
r8a7778_register_hspi() used only from setup-r8a7778.c it can be static Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26ARM: shmobile: r8a7778: cleanup registration of sh_ethKuninori Morimoto3-16/+13
sh_eth driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26ARM: shmobile: r8a7778: cleanup registration of vinKuninori Morimoto3-42/+26
vin driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-22ARM: shmobile: armadillo: fixup ether pinctrl namingKuninori Morimoto1-2/+2
e5c9b4cd665106d9b5397114ea81a53059410b6a ("sh_eth: get R8A7740 support out of #ifdef") exchanged sh-eth driver name to r8a7740-gether, but, eva_pinctrl_map[] didn't follow it. Fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixupSergei Shtylyov1-1/+26
Currently on the Lager board NFS timeouts/delays are seen when booting. That turned out to happen because the SoC's ETH_LINK signal turns on and off after each packet. It is connected to Micrel KSZ8041 PHY's LED0 signal. Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds to non-default 01 setting of the PHY control register 1 bits 14-15. The 'sh_eth' driver resets the PHY when opening the network device, so we have to set the mentioned bits back to 01 from the default 00 value which causes bouncing of ETH_LINK. That can be achieved using the PHY platform fixup mechanism if we also modify the driver to use it.. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Introduce shmobile_boot_sizeMagnus Damm2-0/+4
Introduce shmobile_boot_size that can be used by future SMP code to determine the size of the boot code that needs to be copied to internal SRAM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Expose shmobile_invalidate_start()Magnus Damm1-0/+1
Expose shmobile_invalidate_start() in common.h for mach-shmobile. This function will be used for boot of secondary processors on future non-SCU SMP platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Remove unused shmobile_smp_init_cpus()Magnus Damm2-16/+0
Remove shmobile_smp_init_cpus() since all SMP platforms in mach-shmobile now rely on DT for CPU core description instead of for instance determining number of cores from the SCU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Use shmobile_smp_cpu_disable() on sh73a0Magnus Damm1-8/+1
Use shmobile_smp_cpu_disable() on sh73a0 since it allows CPU Hotplug of any CPU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: Introduce shmobile_smp_cpu_disable()Magnus Damm2-0/+8
Introduce the shared CPU Hotplug function shmobile_smp_cpu_disable() for mach-shmobile. It is useful for the case when all CPUs may be hotplugged, including CPU 0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: r8a7778: add SSI/SRU clock supportKuninori Morimoto1-2/+41
Add a platform clock for the r8a7778 SRU/SSI sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: r8a7790: Add DU and LVDS clocksLaurent Pinchart1-1/+11
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: r8a7779: Rename DU device in clock lookups listLaurent Pinchart1-1/+1
The DU device will be called rcar-du-r8a7779. Rename the clock lookup entry accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: r8a7790: Constify platform data and resourcesLaurent Pinchart1-10/+11
Platform data and resources for core devices are kmemdup()ed when the corresponding devices are registered and can thus be declared as const. Do so. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Rename to r8a7790_init_early()Magnus Damm4-5/+5
Rename r8a7790_init_delay() into r8a7790_init_early() to make the function name show that more than just delay setup may happen in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Rename to r8a73a4_init_early()Magnus Damm4-5/+5
Rename r8a73a4_init_delay() into r8a73a4_init_early() to make the function name show that more than just delay setup may happen in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 03:45:48 +0300