summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)AuthorFilesLines
2013-06-17ARM: shmobile: Remove Bonito board supportKuninori Morimoto4-510/+0
Remove board support for the r8a7740 based Bonito board The r8a7740 SoC support code is still kept around since it is in use by the Armadillo800eva board which is basically a more recent board where the design is based on Bonito. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove AP4EVB board supportMagnus Damm8-1463/+2
Remove board support for the sh7372 based AP4EVB board The sh7372 SoC support code is still kept around since it is in use by the Mackerel board which is basically a more recent board where the design is based on AP4EVB. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove mach/memory.hMagnus Damm1-7/+0
Remove mach-shmobile memory.h since it is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove MEMORY_START/SIZEMagnus Damm1-31/+0
Remove CONFIG_MEMORY_START and CONFIG_MEMORY_SIZE from mach-shmobile. Boards should use DT to specify their memory setup. Boards that still not support DT may pass ATAGS with memory information from the boot loader. If those ATAGS turn out to be incorrect then appended DTB with memory information should be used as a workaround. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove old SCU boot codeMagnus Damm2-22/+1
Remove shmobile_secondary_vector_scu now when all SCU enabled SMP platforms instead make use of shmobile_boot_scu. This removes two inline virtual to physical address conversions. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: EMEV2 SMP with SCU boot fn and argsMagnus Damm1-2/+4
Let EMEV2 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: sh73a0 SMP with SCU boot fn and argsMagnus Damm1-2/+4
Let sh73a0 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: r8a7779 SMP with SCU boot fn and argsMagnus Damm1-2/+4
Let r8a7779 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Add SCU boot function using argumentMagnus Damm2-0/+14
Add a shmoible_boot_scu function that assumes that the base address of the SCU is passed in r0. This code is free from inline virtual to physical address conversion. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Add SMP boot function and argumentMagnus Damm2-4/+13
Add code for mach-shmobile to allow specifying boot function and argument. Will initially be used for SMP together with SCU but may in the future also be used for deep sleep resume. This patch removes one inline virtual to physical address conversion. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()Magnus Damm3-1/+9
Instead of having a hard coded virt-to-phys address conversion code in sleep-sh7372.S, rework the code to do the conversion in C using virt_to_phys(). This removes the need for PLAT_PHYS_OFFSET which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: squashed in build fix posted as "ARM: shmobile: sh7372 build fix for SUSPEND=n && CPU_IDLE=n"] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-15Merge tag 'renesas-soc2-for-v3.11' of ↵Olof Johansson6-15/+131
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Second Round of Renesas ARM-based SoC updates for v3.11 * Ether device name updates for r8a7778 and r8a7779 Sergei Shtylyov * Extended clock and driver coverage for r8a7778 by Goda-san and Morimoto-san * Extended clock and coverage for r8a73a4 and r8a7790 by Guennadi Liakhovetski * HSCIF support for r8a7790 by Ulrich Hecht * tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI ARM: shmobile: r8a7778: add support MMC driver ARM: shmobile: r8a7778: add support HSPI driver ARM: shmobile: r8a7778: add support I2C driver ARM: shmobile: r8a7778: add support MMC clock ARM: shmobile: r8a7778: add support HSPI clock ARM: shmobile: r8a7778: add support I2C clock ARM: shmobile: r8a7790: HSCIF support ARM: shmobile: r8a7778: fix Ether device name ARM: shmobile: r8a7779: fix Ether device name Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-shmobile/clock-r8a7778.c arch/arm/mach-shmobile/include/mach/r8a7778.h
2013-06-13ARM: shmobile: r8a7790: add __initdata on resource and device dataKuninori Morimoto1-6/+6
These data will be kmemdup()'ed on platform_device_add_resources() and platform_device_add_data() This patch removed "const" to avoid section type conflict with r8a7790_boards_compat_dt Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13Merge tags 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11' into cleanupSimon Horman26-1323/+1258
This merge has been performed in order to provide the pre-requisites for a cleanup patch for the lager board to annotate various structures with __initdata. Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/include/mach/r8a7778.h arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-13ARM: shmobile: bockw: add MMCIF supportKuninori Morimoto1-0/+32
This patch enables CN26 MMCIF Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13ARM: shmobile: bockw: add SPI FLASH supportKuninori Morimoto1-0/+36
This patch enables Spansion S25FL008K chip on HSPI0 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13ARM: shmobile: bockw: add I2C device supportKuninori Morimoto1-0/+10
This patch enables rx8581 on I2C0 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13ARM: shmobile: BOCK-W: add Ether supportSergei Shtylyov1-0/+18
Register Ether device from bockw_init(), passing the platform data to it, adding only the RMII pin group to bockw_pinctrl_map[]. Although the LINK signal exists on the board, it's connected to the link/activity LED output of the PHY, thus the link disappears and reappears after each packet. We'd be better off ignoring such signal and getting the link state from the PHY indirectly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13Merge branch 'soc2' into boards-baseSimon Horman6-15/+131
This is to provide MMC support for the r8a7778 SoC which which required by patches to add MMC support to the bockw board.
2013-06-13Merge tag 'exynos-dt-1' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Update exynos DT for - usb3phy and dwc3 for exynos5250 - keypad for exynos4412 - TMU clock for exynos4210 - MFC clock for exynos4 - DP controller for exynos5250 - G2D clock for exynos4 - some exynos boards * tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits) ARM: dts: add ohci and ehci controller nodes for EXYNOS5440 ARM: dts: Update G2D documentation for clock entries ARM: dts: Add clock entries to G2D node for exynos4x12 ARM: dts: Add clock entries to G2D node for exynos4210 ARM: dts: Remove duplicate and add missing G2D nodes clk: exynos4: Add additional G2D clocks ARM: dts: Document DP clock in samsung,exynos5-dp binding ARM: dts: add pin state information for DP HPD support to Exynos5250 ARM: dts: add dts node for the ahci sata exynos5440 ARM: dts: add vmmc regulator support for ODROID-X ARM: dts: add max77686 node entry for ODROID-X ARM: dts: Enable RTC by default on EXYNOS5440 ARM: dts: Add display timing node to exynos5250-arndale.dts ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC ARM: dts: Add DT node for DP controller for Arndale Board ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi ARM: dts: add max8997 device node for exynos4210-origen board ARM: dts: Enable TMU on Origen4210 board ARM: dts: Add TMU clock entries to exynos4210.dtsi ARM: dts: Update MFC documentation for clock entries ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-12ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHIGuennadi Liakhovetski1-7/+19
Add MSTP clock definitions and fix aliases for the two MMCIF and four SDHI interfaces on r8a7790 (H2). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> [horms+renesas@verge.net.au: applied manually] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHIGuennadi Liakhovetski1-5/+17
Add MSTP clock definitions and fix aliases for the two MMCIF and three SDHI interfaces on r8a73a4 (APE6). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: Remove romImage CONFIG_MEMORY_STARTMagnus Damm1-0/+2
Instead of relying on CONFIG_MEMORY_START for memory base address, let each romImage board header file specify this information. This is reworks code not to rely on CONFIG_MEMORY_START which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: uImage load address reworkMagnus Damm1-2/+18
This is V2 of the mach-shmobile uImage load address rework patch. Rework the mach-shmobile uImage load address calculation by storing the per-board load addresses in Makefile.boot. This removes the CONFIG_MEMORY_START dependency from Makefile.boot, and it also makes it possible to create safe kernel images that boot on multiple boards. This is one of several series of code that reworks code not to rely on CONFIG_MEMORY_START/SIZE which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support MMC driverKuninori Morimoto2-0/+15
Add a platform device for the r8a7778 MMC. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support HSPI driverKuninori Morimoto2-0/+24
Add a platform device for the r8a7778 HSPI. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support I2C driverKuninori Morimoto2-0/+27
Add a platform device for the r8a7778 I2C. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support MMC clockKuninori Morimoto1-0/+3
This patch adds r8a7778 MMC clock support. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support HSPI clockKuninori Morimoto1-0/+6
This patch adds r8a7778 HSPI clock support. It also adds shyway_clk which is requiested from sh-hspi driver Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support I2C clockKuninori Morimoto1-1/+13
This patch adds r8a7778 I2C clock support. It also adds peripheral_clk which is requiested from i2c-rcar driver Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11Merge tag 'renesas-boards-for-v3.11' of ↵Olof Johansson6-62/+263
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards From Simon Horman: Renesas ARM-based SoC board updates for v3.11 Highlights: bockw: add SDHI0 support bockw: add dummy regulators for SMSC bockw: Document CN9 SCIF/RCAN dipswitch selection lager: support GPIO switches and LEDs kzm9g: add AS3711 PMIC platform data marzen: Use INTC External IRQ pin driver for SMSC ape6evm: Update MP clock parent become EXTAL2 in line with changes to r8a73a4 SoC code * tag 'renesas-boards-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: keep local function as static ARM: shmobile: bockw: add SDHI0 support ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC ARM: shmobile: lager: support GPIO switches ARM: shmobile: lager: Add GPIO LEDs ARM: shmobile: bockw: add dummy regulators for SMSC ARM: shmobile: bockw: add CN9 SCIF/RCAN selection dipswitch explanation ARM: shmobile: kzm9g: add AS3711 PMIC platform data ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1 ARM: shmobile: bockw: define FPGA address and rename iomem variable ARM: shmobile: ape6evm: MP clock parent become EXTAL2
2013-06-11Merge branch 'renesas/soc' into next/boardsOlof Johansson11-132/+924
Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/include/mach/r8a7778.h arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-11Merge branch 'renesas/pinmux-gpio' into next/boardsOlof Johansson19-1191/+334
2013-06-11ARM: shmobile: BOCK-W: add USB supportSergei Shtylyov1-0/+8
Register the USB PHY device from bockw_init(), passing the platform data to it. Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to get registered too... Don't forget to add USB PENC0/1 pins to bockw_pinctrl_map[]. The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add USB supportSergei Shtylyov4-0/+117
Add USB clock and EHCI, OHCI, and USB PHY platform devices for R8A7778 SoC; add a function to register PHY device with board-specific platform data and register EHCI and OHCI platfrom devices from the init_late() board method. Also, don't forget to enable CONFIG_ARCH_HAS_[EO]HCI options for R8A7778 SoC in Kconfig... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: Marzen: pass platform data to USB PHY deviceSergei Shtylyov3-9/+14
Since we're now going to setup the USBPCTRL0 register using the USB PHY device's platform data, we now need a way to pass those platform data from the board file to the device which is situated in setup-r8a7779.c -- and what I'm suggesting is r8a7779_add_usb_phy_device() that will register USB PHY platform device with the passed platform data using platform_device_register_resndata() call; creating this function involves deletion of 'usb_phy_device' from r8a7779_devices_dt[], so that it will no longer be registered for the generic R8A7779 machine (where we can't provide the platform data anyway), hence EHCI/OHCI drivers will fail to load as well. For the Marzen board, this new function will be called from marzen_init() to register the USB PHY device early enough. Note that the board and the SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11phy-rcar-usb: correct base addressSergei Shtylyov1-1/+1
The memory region that is used by the driver overlaps EHCI and OHCI register regions for absolutely no reason now -- fix it by adding offset of 0x800 to the base address, changing the register #define's accordingly. This has extra positive effect that we now can use devm_ioremap_resource()... Note that the driver and the SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7779: remove USB PHY 2nd memory resourceSergei Shtylyov1-5/+0
Now that 'drivers/usb/phy/phy-rcar-usb.c' doesn't require the second memory resource anymore, we can remove it from the R8A7779's USB PHY platform device. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7779: setup EHCI internal bufferSergei Shtylyov1-0/+16
Setup the EHCI internal buffer (before EHCI driver has a chance to touch the registers) using the pre_setup() method in 'struct usb_ehci_pdata'. The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 codeSergei Shtylyov3-180/+184
USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and registered in the Marzen board file. Move the data and code to their proper place in setup-r8a7779.c; while at it, we have to rename r8a7779_late_devices[] to r8a7779_standard_devices[] -- this seems legitimate since they are registered from r8a7779_add_standard_devices() anyway. Note that I'm deliberately changing the USB PHY platform device's 'id' field from (previously just omitted) 0 to -1 as the device is a single of its kind. Note also that the board and SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7790: HSCIF supportUlrich Hecht1-0/+5
Adds support for HSCIF0 and HSCIF1 on the r8a7790. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: fix Ether device nameSergei Shtylyov1-1/+1
While recasting commit 524219146a89aee5366326c225ccd71231419d89 (ARM: shmobile: R8A7778: add Ether support), I made a typo in the platform device's name: used underscore instead of hyphen. However, there's now patch merged to net-next.git renaming the platform device from "sh-eth" to "r8a777x-ehter", so it makes the most sense to change the name straight to that one. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7779: fix Ether device nameSergei Shtylyov1-1/+1
While recasting commit dace48d04dee46a3409d5e13cd98031522e46377 (ARM: shmobile: R8A7779: add Ether support), I made a typo in the platform device's name: used underscore instead of hyphen. However, there's now patch merged to net-next.git renaming the platform device from "sh-eth" to "r8a777x-ehter", so it makes the most sense to change the name straight to that one. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11Merge branches 'heads/pinmux' and 'heads/soc' into phy-rcar-usb-baseSimon Horman11-132/+924
This branch acts as a base for adding USB support to r8A7778/BOCK-W and r8A7779/Marzen. It includes the soc branch to provide dependencies in the r8A7778 clock code. It includes pinmux to provide pinmux initialisation for Bock-W which is a dependency. Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/include/mach/r8a7778.h arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-11Merge tag 'renesas-dt-for-v3.11' of ↵Olof Johansson6-31/+278
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM-based SoC DT updates for v3.11 * Armadillo800eva reference DT - bring up armadillo800eva baord using DT as much as possible * Remove unused GIC dtsi entries for r8a7790 and r8a73a4 * Add AS3711 and CPUFreq DT bindings for kzm9g-reference * Add irqpin DT support for marzen-reference * tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen-reference: add irqpin support in DT ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings ARM: shmobile: armadillo800eva: Reference DT implementation ARM: shmobile: Remove unused r8a7790 GIC CPU interface DT bits ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bits ARM: shmobile: r8a7740: Prepare for reference DT setup ARM: shmobile: r8a7740: Add OF support to initialze the GIC Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-08sh_eth: get R8A777x support out of #ifdefSergei Shtylyov2-2/+2
Get the R-Car code/data in the driver out of #ifdef by adding "r8a777x-ether" to the platfrom driver's ID table; since it's the last #ifdef, we remove CARDNAME from the ID table and no longer check the driver data before assigning it to 'mdp->cd'... Change the Ether platform device's name in the ARM platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-08sh_eth: get R8A7740 support out of #ifdefSergei Shtylyov2-2/+2
Get the R8A7740 code/data in the driver out of #ifdef by adding "r8a7740-gether" to the platform driver's ID table. Change the GEther platform device's name in the ARM platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-08Merge tag 'renesas-fixes-for-v3.10' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07arm: fix up ARM_ARCH_TIMER selectsMark Rutland1-2/+2
In 8a4da6e: "arm: arch_timer: move core to drivers/clocksource", the selection of ARM_ARCH_TIMER was indirected via HAVE_ARM_ARCH_TIMER, though mach-exynos's selection of ARM_ARCH_TIMER was missed, and since then mach-shmobile, mach-tegra, and mach-virt have begun selecting ARM_ARCH_TIMER. This can lead to architected timer support erroneously appearing to not be selected in menuconfig. This patch fixes up the Kconfigs for those platforms to select HAVE_ARM_ARCH_TIMER. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07ARM: shmobile: marzen: keep local function as staticKuninori Morimoto1-1/+1
marzen_init_late() should be static Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 14:57:24 +0300