summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)AuthorFilesLines
2012-09-21ARM: dtb: move all dtb targets to common MakefileOlof Johansson1-4/+0
Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson11-20/+14
into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge branch 'next/soc' into next/multiplatformOlof Johansson4-1/+60
* next/soc: (50 commits) ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ARM: tegra30: add CPU hotplug support ARM: tegra: clean up the common assembly macros into sleep.h ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops ARM: tegra: introduce tegra_cpu_car_ops structures ARM: Tegra: Add smp_twd clock for Tegra20 ARM: AM33XX: clock: Add dcan clock aliases for device-tree ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions ARM: OMAP: omap_device: idle devices with no driver bound ARM: OMAP: omap_device: don't attempt late suspend if no driver bound ARM: OMAP: omap_device: keep track of driver bound status ARM: OMAP3+: hwmod: Add AM33XX HWMOD data ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework ... Change/remove conflict in arch/arm/mach-ux500/clock.c resolved. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge branch 'next/dt' into next/multiplatformOlof Johansson1-0/+4
* next/dt: (182 commits) ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: imx6q-sabrelite: add usbmisc device ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases ARM: msm: Remove non-DT targets from 8960 ARM: msm: Add DT support for 8960 ARM: msm: Move io mapping prototypes to common.h ARM: msm: Rename board-msm8x60 to signify its DT only status ARM: msm: Make 8660 a DT only target ARM: msm: Move 8660 to DT timer ARM: msm: Add DT support to msm_timer ...
2012-09-21Merge tag 'omap-devel-dt-merged-for-v3.7' of ↵Olof Johansson4-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree related changes for omaps. Note that this branch is based on omap-cleanup-sparseirq-for-v3.7 to avoid merge conflicts with the sparseirq changes for gpio-twl4030 driver. * tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/dts: Mux uart pins for omap4-sdp ARM: OMAP2+: select PINCTRL in Kconfig arm/dts: Add pinctrl driver entries for omap2/3/4 arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm ARM: dts: omap3-overo: Add support for the blue LED Documentation: dt: Update the OMAP documentation with Overo/Toby ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board ARM: dts: OMAP4: Add reg and interrupts for every nodes ARM: dts: AM33XX: Specify reg and interrupt property for all nodes ARM: dts: AM33XX: Convert all hex numbers to lower-case ARM: dts: omap3-beagle: Enable audio support ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file ARM: dts: omap5: Add McBSP entries ARM: dts: omap4: Add reg-names for McPDM and DMIC ARM: dts: omap4: Add McBSP entries ARM: dts: omap3: Add McBSP entries ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2 ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM ...
2012-09-17Merge tag 'cleanup-omap-tags-for-v3.7' of ↵Olof Johansson4-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: Remove the ancient omap specific atags that are no longer needed. At some point we were planning to pass the bootloader information with custom atags that did not work out too well. There's no need for these any longer as the kernel has been booting fine without them for quite some time. And Now we have device tree support that can be used instead. * tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: remove plat/board.h file ARM: OMAP: move debug_card_init() function ARM: OMAP1: move lcd pdata out of arch/arm/* ARM: OMAP1: move omap1_bl pdata out of arch/arm/* ARM: OMAP: remove the omap custom tags ARM: OMAP1: remove the crystal type tag parsing ARM: OMAP: remove the sti console workaround ARM: OMAP: omap3evm: cleanup revision bits ARM: OMAP: cleanup struct omap_board_config_kernel + sync to 3.6-rc5
2012-09-17Merge tag 'devel-omap-device-for-v3.7' of ↵Olof Johansson4-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Kevin Hilman <khilman@ti.com>: Updates for omap_device layer for v3.7. Allows omap_device layer to keep track of driver bound status in order to make more intelligent decisions about idling unused devices. * tag 'devel-omap-device-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: omap_device: idle devices with no driver bound ARM: OMAP: omap_device: don't attempt late suspend if no driver bound ARM: OMAP: omap_device: keep track of driver bound status + sync to 3.6-rc5
2012-09-14ARM: make mach/gpio.h headers optionalRob Herring1-1/+0
Most platforms don't need mach/gpio.h and it prevents multi-platform kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX or have lots of implicit includes pulled in by mach/gpio.h. at91 and omap have gpio clean-up pending and can drop CONFIG_NEED_MACH_GPIO_H once that is in. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: shmobile: move custom gpio functions to sh-gpio.hRob Herring12-68/+63
Move custom shmobile gpio code to a sh-gpio.h to remove the dependency on mach/gpio.h. shmobile always uses gpiolib, so we can remove __GPIOLIB_COMPLEX define from mach/gpio.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com>
2012-09-12Merge branch 'renesas/pmu' into next/socOlof Johansson2-0/+42
* renesas/pmu: ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit) ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)
2012-09-11ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit)Tetsuyuki Kobayashi1-0/+21
This patch enables PMU(Performance Monitoring Unit) for emev2. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-11ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)Tetsuyuki Kobayashi1-0/+21
This patch enables PMU(Performance Monitoring Unit) for sh73a0. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06r8a7779: add SDHI clock supportPhil Edworthy1-1/+10
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-05Merge branch 'fixes' of ↵Olof Johansson2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Two regression fixes and one boot-loader compatibility fix from Simon Horman. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order
2012-09-02Merge branch 'fixes' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: fixup smsc911x id for regulator
2012-08-31ARM: shmobile: mackerel: fixup usb module orderKuninori Morimoto1-1/+2
renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: shmobile: armadillo800eva: fixup: sound card detection orderKuninori Morimoto1-1/+1
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: mach-shmobile: remove duplicated include from board-ag5evm.cWei Yongjun1-1/+0
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'Tetsuyuki Kobayashi1-0/+4
Add compilation support for dtbs using 'make dtbs' Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30ARM: shmobile: marzen: fixup smsc911x id for regulatorKuninori Morimoto1-1/+1
dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-28Merge branch 'armadillo800eva' of ↵Olof Johansson1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'armadillo800eva' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
2012-08-25ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup sourceLaurent Pinchart1-2/+3
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-25ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptionsLaurent Pinchart1-4/+4
The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-25ARM: shmobile: kzm9g: enable restartingTetsuyuki Kobayashi1-0/+8
Do soft-power-on-reset in sys_reboot system call. How to test this patch Execute "sudo reboot" from command line. The system will start shutdown sequence and finally reboot and U-Boot restarts. Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-22ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_descKuninori Morimoto1-2/+2
sh73a0 :: intca_irq_pins_desc irq table had conflict from irq 552 to irq 557 before. But the second controller was simply trampling the first one by way of the -EEXIST case from irq_alloc_desc_at(). But now, we have irqdomain support from 1d6a21b0a672fb29b01ccf397d478e0541e17716 (sh: intc: initial irqdomain support) The irqdomain code has simply tightened down the sanity checks and error path. So, sh73a0 CPU board got some WARNING when booting now. This patch fixup RELOC_BASE to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-30Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds11-84/+1003
Pull arm-soc board updates from Olof Johansson: "This branch contains board updates, mostly for shmobile, but also a couple for PXA. The shmobile platforms are still in the early stages of DT enablement, so there's a bit more updates here than we'd ideally want to see: - regulator updates to provide some fixed regulators on several boards - gpio support updates for multiple boards - misc updates for recently-introduced boards armadillo800eva and kzm9g - defconfig updates" * tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: select the fixed regulator driver on several boards ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently ARM: pxa: remove eseries.h ARM: mach-shmobile: add fixed voltage regulators to marzen ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9d ARM: mach-shmobile: add fixed voltage regulators to kota2 ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: mach-shmobile: add fixed voltage regulators to bonito ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: mach-shmobile: add fixed voltage regulators to ag5evm ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ...
2012-07-22Merge tag 'v3.5-rc7' into late/socArnd Bergmann1-0/+5
Linux 3.5-rc7
2012-07-12Merge branch 'renesas-marzen' into renesas-boardRafael J. Wysocki1-0/+10
* renesas-marzen: ARM: mach-shmobile: add fixed voltage regulators to marzen
2012-07-12Merge branch 'renesas-mackerel' into renesas-boardRafael J. Wysocki1-25/+34
* renesas-mackerel: ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ARM: shmobile: use common extra gpio functions on Mackerel
2012-07-12Merge branch 'renesas-kzm9g' into renesas-boardRafael J. Wysocki1-0/+238
* renesas-kzm9g: ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: shmobile: kzm9g: enable DMAEngine on MMCIF ARM: shmobile: kzm9g: enable DMAEngine on FSI ARM: shmobile: kzm9g: enable MicroSD ARM: shmobile: kzm9g: enable USB function
2012-07-12Merge branch 'renesas-kzm9d' into renesas-boardRafael J. Wysocki1-0/+10
* renesas-kzm9d: ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: add fixed voltage regulators to kzm9d
2012-07-12Merge branch 'renesas-kota2' into renesas-boardRafael J. Wysocki1-0/+30
* renesas-kota2: ARM: mach-shmobile: add fixed voltage regulators to kota2
2012-07-12Merge branch 'renesas-g4evm' into renesas-boardRafael J. Wysocki1-28/+24
* renesas-g4evm: ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: shmobile: use common extra gpio functions on g4evm
2012-07-12Merge branch 'renesas-bonito' into renesas-boardRafael J. Wysocki1-0/+10
* renesas-bonito: ARM: mach-shmobile: add fixed voltage regulators to bonito
2012-07-12Merge branch 'renesas-ap4evb' into renesas-boardRafael J. Wysocki1-17/+31
* renesas-ap4evb: ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: shmobile: use common extra gpio functions on ap4evb
2012-07-12Merge branch 'renesas-ag5evm' into renesas-boardRafael J. Wysocki1-3/+79
* renesas-ag5evm: ARM: mach-shmobile: add fixed voltage regulators to ag5evm
2012-07-12Merge branch 'renesas-armadillo' into renesas-boardRafael J. Wysocki2-10/+234
* renesas-armadillo: ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: shmobile: use common extra gpio functions on armadillo800eva ARM: shmobile: armadillo800eva: enable DMAEngine on USB ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI ARM: shmobile: armadillo800eva: enable DMAEngine on FSI ARM: shmobile: armadillo800eva: enable FSI-HDMI sound ARM: shmobile: armadillo800eva: enable FSI-WM8978 sound Conflicts: arch/arm/mach-shmobile/Kconfig
2012-07-12Merge branch 'renesas-board-common' into renesas-boardRafael J. Wysocki1-0/+10
* renesas-board-common: ARM: mach-shmobile: select the fixed regulator driver on several boards regulator: extend the fixed dummy voltage regulator to accept voltage regulator: support multiple dummy fixed regulators Conflicts: arch/arm/mach-shmobile/Kconfig
2012-07-12Merge branch 'renesas-soc' into renesas-boardRafael J. Wysocki28-434/+1157
* renesas-soc: (31 commits) ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: mach-shmobile: sh7377 generic board support via DT ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ARM: shmobile: use common DMAEngine definitions on sh7372 ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support ...
2012-07-12Merge branch 'renesas-sh7377' into renesas-socRafael J. Wysocki1-0/+47
* renesas-sh7377: ARM: mach-shmobile: sh7377 generic board support via DT
2012-07-12Merge branch 'renesas-sh7372' into renesas-socRafael J. Wysocki6-389/+203
* renesas-sh7372: ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: shmobile: use common DMAEngine definitions on sh7372 ARM: shmobile: sh7372: remove unused sh7372_a3sp_init() on !CONFIG_PM
2012-07-12Merge branch 'renesas-sh73a0' into renesas-socRafael J. Wysocki3-36/+131
* renesas-sh73a0: ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support
2012-07-12Merge branch 'renesas-r8a7740' into renesas-socRafael J. Wysocki6-3/+432
* renesas-r8a7740: ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: use common DMAEngine definitions on r8a7740 ARM: shmobile: r8a7740: add DMAEngine support for USB ARM: shmobile: r8a7740: add DMAEngine support for SDHI ARM: shmobile: r8a7740: add DMAEngine support for FSI
2012-07-12Merge branch 'renesas-soc-core' into renesas-socRafael J. Wysocki11-6/+334
* renesas-soc-core: ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ARM: shmobile: add common DMAEngine definitions ARM: shmobile: add common extra gpio functions Conflicts: arch/arm/mach-shmobile/clock-r8a7740.c
2012-07-12Merge branch 'renesas-fixes' into renesas-socRafael J. Wysocki4-0/+10
* renesas-fixes: ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook
2012-07-12ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .configRafael J. Wysocki1-1/+1
If neither CONFIG_SUSPEND nor CONFIG_CPU_IDLE is set in the kernel configuration file, build error occurs in arch/arm/mach-shmobile/pm-sh7372.c. Fix it by rearranging #ifdefs in that file to make the definition of sh7372_suspend_init() depend only on CONFIG_SUSPEND and the definition of sh7372_cpuidle_init() depend only on CONFIG_CPU_IDLE. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2012-07-12ARM: shmobile: Take cpuidle dependencies into account correctlyMagnus Damm1-0/+1
The sh7372's cpuidle code uses cpu_suspend() and cpu_resume() in its implementation of the .enter() callback for deeper C-states, so make ARCH_SH7372 select ARM_CPU_SUSPEND if CPU_IDLE is set to satisfy all of the build dependencies (it has to be selected for CONFIG_PM as well for the system suspend handling). [rjw: Added the subject and changelog.] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-07ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=nMagnus Damm1-0/+5
Fix build error in the case of SMP=y but ARCH_SH73A0=n introduced by: 9601e87 ARM: shmobile: fix smp build The use of of_machine_is_compatible() will link in the the SoC-specific symbols: "sh73a0_get_core_count", "sh73a0_smp_prepare_cpus", "sh73a0_secondary_init" and "sh73a0_boot_secondary". This patch adds an ugly #ifdef wrapper as a stop-gap solution. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Tested-by: Simon Horman <horms@verge.net.au> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06ARM: mach-shmobile: sh7377 generic board support via DTMagnus Damm1-0/+47
Add generic DT board support for the sh7377 SoC. SCIF serial ports and timers are kept as regular platform devices. Other on-chip and on-board devices should be configured via the device tree. At this point there is no interrupt controller support in place but such code will be added over time when proper IRQ domain support has been added to INTC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-06ARM: mach-shmobile: r8a7740 generic board support via DTMagnus Damm1-0/+47
Add generic DT board support for the r8a7740 SoC. SCIF serial ports and timers are kept as regular platform devices. Other on-chip and on-board devices should be configured via the device tree. At this point there is no interrupt controller support in place but such code will be added over time when proper IRQ domain support has been added to INTC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 20:05:13 +0300