summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/include
AgeCommit message (Collapse)AuthorFilesLines
2009-04-07spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common casesEric Miao1-0/+1
Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-0/+3
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-03-28Merge branch 'origin' into develRussell King2-1/+21
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-25Merge branch 'devel' of ↵root10-241/+45
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-03-24Merge branch 'topic/asoc' into for-linusTakashi Iwai2-1/+21
2009-03-23[ARM] pxa: move common MFP handling code into plat-pxaEric Miao7-118/+19
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: move common GPIO handling code into plat-pxaEric Miao1-31/+1
1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: introduce plat-pxa for PXA common code and add DMA supportEric Miao1-82/+1
1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Add Colibri LCD functionsDaniel Mack1-0/+6
This adds LCD functions for Colibri PXA300 and Colibri PXA320 and configures a LQ043T3DX02 panel. Original-code-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack1-12/+6
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack1-0/+17
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: rename colibri.c to colibri-pxa270.cDaniel Mack1-11/+6
Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23Merge branch 'fix' of ↵Eric Miao2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git into devel
2009-03-23[ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3Daniel Mack1-0/+1
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-20[MTD] [NAND] pxa3xx_nand: add ability to keep controller settings defined by ↵Mike Rapoport1-0/+3
OBM/bootloader Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King1-1/+1
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19[ARM] pxa: add missing pin function for CS2 on GPIO1Daniel Mack1-0/+1
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add initial support for Cogent CSB726 boardDmitry Eremin-Solenikov2-1/+28
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: fix typo in BANK_OFF() macro in gpio.hEric Miao1-1/+1
The typo was originally fixed by Mike Rapoport and missed. And is later reported by Matthias Meier. Signed-off-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: separate definitions from pxa-regs.h and remove it finallyEric Miao7-86/+83
The remaining registers are separated into: - <mach/regs-ost.h> - <mach/regs-rtc.h> - <mach/regs-intc.h> and then we can remove pxa-regs.h completely. Instead of #include this file, let's: 1. include the specific <mach/regs-*.h> with care (if that's absolutely necessary) 2. define the registers in the driver, make cleanly defined API to expose the register access to external with sufficient reason Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.hEric Miao3-12/+20
The definitions of PXA_CS<x>_PHYS are really PXA2xx specific and should be moved out of pxa-regs.h. As an illustration, the PXA3xx static chip selects definitions are added into pxa3xx-regs.h. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.cEric Miao2-1/+10
This isn't perfect but at least solves the problem of pm.c's dependency on register definitions in <mach/lubbock.h>, which doesn't make much sense. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.cEric Miao1-38/+0
Move the processor specific initialization (largely resources initialization) out of soc_common_drv_pcmcia_probe() into dedicated sa11xx_drv_pcmcia_probe() and __pxa2xx_drv_pcmcia_probe(). By doing this, we are now able to move the PCMCIA related definitions out of pxa-regs.h and back into pxa2xx_base.c. As a result, remove that reference of _PCMCIA1IO in arch/arm/mach-pxa/viper.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: access GPIO registers by chip so to make it further genericEric Miao1-0/+1
Let's handle GPIOs by banks, each bank covers up to 32 GPIOs with one set of registers, and each set of registers start from different offsets. GPLR GPDR GPSR GPCR GRER GFER GEDR BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 NOTE: BANK 3 is only available on PXA27x and later processors. BANK 4 and 5 are only available on PXA935 1. introduce GPIO_BANK(n) for the offset base of each bank 2. 'struct pxa_gpio_chip' is expanded to include IRQ edge and mask setings, and saved register values as well, and is dynamically allocated due to possible bank number ranging from 3 to 6 3. all accesses to GPIO registers are made through 'regbase' within 'pxa_gpio_chip', and register offset 4. introduce several inline functions to simplify the code a bit 5. change IRQ demux handler to base on gpio chips Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h>Eric Miao1-1/+4
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move GPIO register definitions into <mach/gpio.h>Eric Miao3-75/+73
This makes gpio.c fully independent of pxa-regs.h (except for the virtual address of the registers). Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.cEric Miao1-2/+36
This is part of the work making gpio.c generic enough, the changes include: 1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c) 2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ number for the muxed GPIOs 3. __gpio_is_occupied() and __gpio_is_inverted() are made inline, and are moved into <mach/gpio.h> instead of generic gpio.c Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move DMA registers definitions into <mach/dma.h>Eric Miao2-59/+56
1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: allow DMA controller IRQ being specifiedEric Miao1-1/+1
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usageEric Miao8-19/+56
Considering the header mess ATM, it is not always possible to include the correct header files within board code. Let's keep this simple: <mach/pxa25x.h> - for pxa25x based platforms <mach/pxa27x.h> - for pxa27x based platforms <mach/pxa300.h> - for pxa300 based platforms <mach/pxa320.h> - for pxa320 based platforms <mach/pxa930.h> - for pxa930 based platforms NOTE: 1. one header one board file, they are not compatible (i.e. they have conflicting definitions which won't compile if included together). 2. Unless strictly necessary, the following header files are considered to be SoC files use _only_, and is not recommended to be included in board code: <mach/hardware.h> <mach/pxa-regs.h> <mach/pxa2xx-regs.h> <mach/pxa3xx-regs.h> <mach/mfp.h> <mach/mfp-pxa2xx.h> <mach/mfp-pxa25x.h> <mach/mfp-pxa27x.h> <mach/mfp-pxa3xx.h> <mach/mfp-pxa300.h> <mach/mfp-pxa320.h> <mach/mfp-pxa930.h> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09Merge branch 'devel' of ssh://master.kernel.org/home/rmk/linux-2.6-arm into ↵Eric Miao1-0/+1
devel
2009-03-09Merge branch 'fix' of ↵Eric Miao2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-03-06ASoC: add two more bitfields for PXA SSPDaniel Mack1-0/+5
Add two more bitfields for the PSP register. As they seem to exist for PXA3xx only, define them conditionally. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix name of register bit in pxa-sspDaniel Mack1-1/+1
A bit in PXA's SSCR0 register was erroneously named ADC but its name is in fact ACS (audio clock select). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-10[ARM] 5354/1: mach-pxa: add AM300 platform driver v3Jaya Kumar1-0/+1
This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-02[ARM] pxa/magician: Enable pxa27x_udc and gpio_vbusPhilipp Zabel1-1/+1
This patch depends on otg_transceiver support in pxa27x_udc (which is queued via linux-usb) to work. It compiles also without it. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmLD initial supportMarek Vasut1-0/+109
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmT5 initial supportMarek Vasut1-0/+84
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19ASoC: machine support for Toshiba e740 PDAIan Molton1-0/+5
This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-19[ARM] pxa: make more SSCR0 bit definitions visible on multiple processorsEric Miao1-0/+3
The only exclusive definitions are SSCR0_SCR and SSCR0_SerClkDiv(), loosen that exclusive #ifdef .. #else .. #endif to allow other definitions to be visible when slected multiple processors. This helps to pass the building of pxa-ssp.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: fix missing of __REG() definition for ac97 registers accessEric Miao1-0/+2
This currently happens for 'drivers/input/touch/mainstone-wm97xx.c'. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-16ASoC: machine driver for Toshiba e800Ian Molton1-0/+5
This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-16ASoC: machine driver for Toshiba e750Ian Molton1-0/+5
This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08[ARM] fix pxaRussell King1-2/+0
arch/arm/mach-pxa/pxa300.c:94: error: 'CKEN_MMC3' undeclared here (not in a function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds2-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
2008-12-31Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds23-575/+536
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-29Merge branch 'for-rmk' of ↵Russell King5-25/+47
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-12-29Input: add support for enhanced rotary controller on pxa930 and pxa935Yong Yao1-0/+20
Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-29Input: add support for trackball on pxa930 and pxa935Yong Yao1-0/+10
Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-29[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devicesEric Miao1-9/+25
PXA27x and later processors support overlay1 and overlay2 on-top of the base framebuffer (although under-neath the base is also possible). They support palette and no-palette RGB formats, as well as YUV formats (only available on overlay2). These overlays have dedicated DMA channels and behave in a similar way as a framebuffer. This heavily simplified and re-structured work is based on the original pxafb_overlay.c (which is pending for mainline merge for a long time). The major problems with this pxafb_overlay.c are (if you are interested in the history): 1. heavily redundant (the control logics for overlay1 and overlay2 are actually identical except for some small operations, which are now abstracted into a 'pxafb_layer_ops' structure) 2. a lot of useless and un-tested code (two workarounds which are now fixed on mature silicons) 3. cursorfb is actually useless, hardware cursor should not be used this way, and the code was actually un-tested for a long time. The code in this patch should be self-explanatory, I tried to add minimum comments. As said, this is basically simplified, there are several things still on the pending list: 1. palette mode is un-supported and un-tested (although re-using the palette code of the base framebuffer is actually very easy now with previous clean-up patches) 2. fb_pan_display for overlay(s) is un-supported 3. the base framebuffer can actually be abstracted by 'pxafb_layer' as well, which will help further re-use of the code and keep a better and consistent structure. (This is the reason I named it 'pxafb_layer' instead of 'pxafb_overlay' or something alike) See Documentation/fb/pxafb.txt for additional usage information. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 09:02:13 +0300